Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Monthly averages of ED2 model simulations initialized with airborne lidar structure, Jan 1981-Dec 2018, Brazilian Amazon

Deforestation and forest degradation (selective logging, fires, fragmentation) have impacted nearly 40% of the original extent of the Brazilian Amazon, and have markedly impacted forest structure across the region. To date, few studies analysed how shifts in forest structure from degradation influence the forest sensitivity to climate extremes, because of the complex interactions between forest structure and micro-environmental conditions. To address this knowledge gap, we carried out a series of simulations across the Brazilian Amazon using the Ecosystem Demography Model (ED2), using observed forest structure derived from 541 airborne lidar transects (375 ha each) and two scenarios representing forest recovery and expansion of degradation to investigate how shifts in forest structure impact ecosystem function under near-average and extreme climate conditions, as part of the manuscript Longo et al 2025 "Degradation and Deforestation Increase the Sensitivity of the Amazon Forest to Climate Extremes". This dataset provides the output results from the ED2 model simulations for the three simulations at monthly time scales, in NetCDF format. For all simulations, we used bias-corrected hourly reanalyses (WFDE5) for most meteorological drivers, except for precipitation, which was obtained from CHIRPS. The meteorological drivers used in the study span 38 years (Jan 1981–Dec 2018). The output results correspond to the last 38 years of simulation (one full cycle of meteorological drivers), in which ED2 simulations used static stand structure (i.e., the forest structure was held constant). The following files are provided:ED2_emean_Global_R004_BrAmaz_s1c0t0l0f0.nc. This corresponds to the Control simulation. The forest structure was obtained from the airborne lidar.ED2_emean_Global_R005_BrAmaz_s1c0t1l1f0.nc. This corresponds to the Degraded simulation. The forest structure was obtained from a spin-up simulation initialized with airborne lidar and a scenario that expanded deforestation and selective logging across the Amazon.ED2_emean_Global_R006_BrAmaz_s1c0t1l0f0.nc. This corresponds to the Recovery simulation. The forest structure was obtained from a spin-up simulation initialized with airborne lidar and a scenario that completely halted deforestation and degradation, allowing degraded forests to recover for 38 years.We also provide file ED2_zones_R004_BrAmaz_s1c0t0l0f0.nc, which classifies each grid cell into zones used in the reference manuscript: 1: Southeast. 2: South. 3: West. 4: Central. 5: Northeast. 6: North. 7: Northwest". Index 0 corresponds to grid cells excluded from sub-region analyses because they were dominated by flooded forests, deforestation, and naturally non-forest vegetation.

54 ENVIRONMENTAL SCIENCES↗

Time-dependent local and average structural evolution of δ-phase 239 Pu-Ga alloys

Here, plutonium metal is a very unusual element, exhibiting six allotropes at ambient pressure, between room temperature and its melting point, a complicated phase diagram, and a complex electronic structure. Many phases of plutonium metal are unstable with changes in temperature, pressure, chemical additions, or time. This strongly affects structure and properties, and becomes of high importance, particularly when considering effects on structural integrity over long periods of time [1]. This paper presents a time-dependent neutron total scattering study of the local and average structure of naturally aging δ-phase 239 Pu-Ga alloys, together with preliminary results on neutron tomography characterization.

36 MATERIALS SCIENCE↗

Time-averaged Spray Analysis in the Near-field Using Broadband and Narrowband X-ray Measurements

The characterization of a spray in the near-field region is challenging because of its high optical density in this region. X-ray based techniques, with weak scatter and strong penetration properties, can provide better characterization than optical assessment techniques in this region. Here, the effects of various operating parameters on the optical depth (defined as the accumulated liquid thickness in the beam path times the X-ray attenuation coefficient) and spray profile of an atomizing spray in the near-field region are evaluated based on time-averaged X-ray analysis techniques. Controlling parameters in the spray structure include swirl ratio, liquid phase Reynolds number, and gas phase Reynolds number. Data from the broadband X-ray radiographs obtained using a tube source at Iowa State University and from focused beam measurements at the Advanced Photon Source at Argonne National Laboratory are compared. The X-ray tube source at Iowa State University was operated at two different energy levels, which reveals that the X-ray tube source energy influenced the magnitude of the optical depth but did not change the shape of the distribution. For the no swirl condition, gas flow rate and liquid flow rate had opposite effects on the spray profile, where the spray widens as the gas flow rate increases and narrows as the liquid flow rate increases. As the swirl ratio increases from 0 to 1, the spray widens and then narrows. Furthermore, the critical swirl ratio at which the spray reaches its widest spread differs at different flow conditions.

42 ENGINEERING↗

D-branes and orbit average

We study correlation functions of D-branes and a supergravity mode in AdS, which are dual to structure constants of two sub-determinant operators with large charge and a BPS single-trace operator. Our approach is inspired by the large charge expansion of CFT and resolves puzzles and confusions in the literature on the holographic computation of correlation functions of heavy operators. In particular, we point out two important effects which are often missed in the literature; the first one is an average over classical configurations of the heavy state, which physically amounts to projecting the state to an eigenstate of quantum numbers. The second one is the contribution from wave functions of the heavy state. To demonstrate the power of the method, we first analyze the three-point functions in N=4 super Yang-Mills and reproduce the results in field theory from holography, including the cases for which the previous holographic computation gives incorrect answers. We then apply it to ABJM theory and make solid predictions at strong coupling. Finally we comment on possible applications to states dual to black holes and fuzzballs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Core Average (MOX/LEU) Nuclide Ratios for Sequoyah and Browns Ferry Reactors (Non-Proprietary)

Oak Ridge National Laboratory (ORNL) was directed by the Department of Energy NN-26 to develop and run SCALE/TRITON [1] models for the generation of core-average nuclide inventories, in a MOX core (61% LEU + 39% MOX) and a LEU core with assembly burnups as high as ~60 GWd/MTU, for a Sequoyah pressurized water reactor (PWR) and a Browns Ferry boiling water reactor (BWR). This study compares the nuclide ratios of a representative MOX core to a representative LEU core for both the Sequoyah (SQN) and Browns Ferry (BFN) reactors. Previous work [2, 3], supporting earlier Environmental Impact Statement (EIS) reports, considered only a PWR assembly.

Bevard, Bruce Balkcom↗

Nearest Neighbor Averaging and its Effect on the Critical Level and Minimum Detectable Concentration for Scanning Radiological Survey Instruments that Perform Facility Release Surveys.

Through the SNL New Mexico Small Business Assistance (NMSBA) program, several Sandia engineers worked with the Environmental Restoration Group (ERG) Inc. to verify and validate a novel algorithm used to determine the scanning Critical Level (L c ) and Minimum Detectable Concentration (MDC) (or Minimum Detectable Areal Activity) for the 102F scanning system. Through the use of Monte Carlo statistical simulations the algorithm mathematically demonstrates accuracy in determining the L c and MDC when a nearest-neighbor averaging (NNA) technique was used. To empirically validate this approach, SNL prepared several spiked sources and ran a test with the ERG 102F instrument on a bare concrete floor known to have no radiological contamination other than background naturally occurring radioactive material (NORM). The tests conclude that the NNA technique increases the sensitivity (decreases the L c and MDC) for high-density data maps that are obtained by scanning radiological survey instruments.

Fournier, Sean Donovan↗

Averaging cross section data so we can fit it

The 56 Fe cross section we are interested in have a lot of fluctuations. We would like to fit the average of the cross section with cross sections calculated within EMPIRE. EMPIRE is a Hauser-Feshbach theory based nuclear reaction code, requires cross sections to be smoothed using a Lorentzian profile. The plan is to fit EMPIRE to these cross sections in the fast region (say above 500 keV).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optimization and Annual Average Power Predictions of a Backward Bent Duct Buoy Oscillating Water Column Device Using the Wells Turbine.

This Technical Report presents work completed by The Applied Research Laboratory at The Pennsylvania State University, in conjunction with Sandia National Labs, on the optimization of the power conversion chain (PCC) design to maximize the Average Annual Electric Power (AAEP) output of an Oscillating Water Column (OWC) device. The design consists of two independent stages. First, the design of a floating OWC, a Backward Bent Duct Buoy (BBDB), and second the design of the PCC. The pneumatic power output of the BBDB in random waves is optimized through the use of a hydrodynamically coupled, linear, frequency-domain, performance model that links the oscillating structure to internal air-pressure fluctuations. The PCC optimization is centered on the selection and sizing of a Wells Turbine and electric power generation equipment. The optimization of the PCC involves the following variables: the type of Wells Turbine (fixed or variable pitched, with and without guide vanes), the radius of the turbine, the optimal vent pressure, the sizing of the power electronics, and number of turbines. Also included in this Technical Report are further details on how rotor thrust and torque are estimated, along with further details on the type of variable frequency drive selected.

13 HYDRO ENERGY↗

Average Atom models

This report discusses average atom models, relatively cheap EOS models based on DFT that can access any temperature or density point for any element.

74 ATOMIC AND MOLECULAR PHYSICS↗

Commercial Integrated Heat Pump with Thermal Storage --Demonstrate Greater than 50% Average Annual Energy Savings, Compared with Baseline Heat Pump and Water Heater (Go/No-Go) FY16 4th Quarter Milestone Report

For this study, we authored a new air source integrated heat pump (AS-IHP) model in EnergyPlus, and conducted building energy simulations to demonstrate greater than 50% average energy savings, in comparison to a baseline heat pump with electric water heater, over 10 US cities, based on the EnergyPlus quick-service restaurant template building. We also assessed water heating energy saving potentials using ASIHP versus gas heating, and pointed out climate zones where AS-IHPs are promising.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

High-Average-Power Laser Experiments at the Large Plasma Device

A high average power laser system was commissioned at the Large Plasma Device at UCLA. The system was used to produce volumetric data of electric and magnetic fields around diamagnetic cavities formed by exploding plasmas in the presence of an ambient magnetized plasma. The laser system was also used as probe beam for optical Thomson scattering.

47 OTHER INSTRUMENTATION↗

Petroleum, 2005 National Average, Production and Transport

This process includes all inputs for the raw material acquisition and raw material transportation for 1 kg of delivered 2005 national average crude oil. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=ED57A600-1479-4077-9BCB-663DEE846346

02 PETROLEUM↗

Natural Gas, Average Associated, Extraction

This process includes all inputs for the raw material acquisition 1 kg of natural gas via average associated extraction. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=35A08CC2-76AE-4904-A5F9-7A765A1690CF

03 NATURAL GAS↗

Natural Gas, Average Barnett Shale, Extraction

This process includes all inputs for the raw material acquisition 1 kg of natural gas via average Barnett shale extraction. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=20B4A3B8-2DAC-4B63-A68D-022B5F5589BB

03 NATURAL GAS↗

Natural Gas, Average Coal Bed Methane, Extraction

This process includes all inputs for the raw material acquisition 1 kg of natural gas via average coal bed methane extraction. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=91AEEC7B-B7A5-479E-A8D3-FD570A5DFF11

03 NATURAL GAS↗

Natural Gas, Average Conventional Offshore, Extraction

This process includes all inputs for the raw material acquisition 1 kg of natural gas via average conventional offshore extraction. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=3517F072-A3B0-4A31-AFF0-6D1B49558D3B

03 NATURAL GAS↗

Natural Gas, Average Conventional Onshore, Extraction

This process includes all inputs for the raw material acquisition 1 kg of natural gas via average conventional onshore extraction. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=8CA50352-A199-435C-9887-7A59FA36D9E9

03 NATURAL GAS↗

Natural Gas, Average LNG, Extraction

This process includes all inputs for the raw material acquisition 1 kg of natural gas via average LNG extraction. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=6A7EA6C1-A7FE-4530-977D-AC8551A6DA6E

03 NATURAL GAS↗