Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attribute measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Quantifying Global Uncertainties in a Simple Microwave Rainfall Algorithm

While a large number of methods exist in the literature for retrieving rainfall from passive microwave brightness temperatures, little has been written about the quantitative assessment of the expected uncertainties in these rainfall products at various time and space scales. The latter is the result of two factors: sparse validation sites over most of the world's oceans, and algorithm sensitivities to rainfall regimes that cause inconsistencies against validation data collected at different locations. To make progress in this area, a simple probabilistic algorithm is developed. The algorithm uses an a priori database constructed from the Tropical Rainfall Measuring Mission (TRMM) radar data coupled with radiative transfer computations. Unlike efforts designed to improve rainfall products, this algorithm takes a step backward in order to focus on uncertainties. In addition to inversion uncertainties, the construction of the algorithm allows errors resulting from incorrect databases, incomplete databases, and time- and space-varying databases to be examined. These are quantified. Results show that the simple algorithm reduces errors introduced by imperfect knowledge of precipitation radar (PR) rain by a factor of 4 relative to an algorithm that is tuned to the PR rainfall. Database completeness does not introduce any additional uncertainty at the global scale, while climatologically distinct space/time domains add approximately 25% uncertainty that cannot be detected by a radiometer alone. Of this value, 20% is attributed to changes in cloud morphology and microphysics, while 5% is a result of changes in the rain/no-rain thresholds. All but 2%-3% of this variability can be accounted for by considering the implicit assumptions in the algorithm. Additional uncertainties introduced by the details of the algorithm formulation are not quantified in this study because of the need for independent measurements that are beyond the scope of this paper. A validation strategy for these errors is outlined.

Kummerow, Christian↗

Temperature dependence of intensities of the 8-12 micron bands of CFCl3

The absolute intensities of the 8-12 micron bands from Freon 11 (CFCl3) were measured at temperatures of 294 and 216 K. Intensities of the bands centered at 798, 847, 934, and 1082 per cm are all observed to depend on temperature. The temperature dependence for the 847 and 1082 per cm fundamental regions is attributed to underlying hot bands; for the nu2 + nu5 combination band (934 per cm), the observed temperature dependence is in close agreement with theoretical prediction. The implication of these results on atmospheric IR remote-sensing is briefly discussed.

Nanes, R.↗

The estimation of genetic divergence

Consideration is given to the criticism of Nei and Tateno (1978) of the REH (random evolutionary hits) theory of genetic divergence in nucleic acids and proteins, and to their proposed alternative estimator of total fixed mutations designated X2. It is argued that the assumption of nonuniform amino acid or nucleotide substitution will necessarily increase REH estimates relative to those made for a model where each locus has an equal likelihood of fixing mutations, thus the resulting value will not be an overestimation. The relative values of X2 and measures calculated on the basis of the PAM and REH theories for the number of nucleotide substitutions necessary to explain a given number of observed amino acid differences between two homologous proteins are compared, and the smaller values of X2 are attributed to (1) a mathematical model based on the incorrect assumption that an entire structural gene is free to fix mutations and (2) the assumptions of different numbers of variable codons for the X2 and REH calculations. Results of a repeat of the computer simulations of Nei and Tateno are presented which, in contrast to the original results, confirm the REH theory. It is pointed out that while a negative correlation is observed between estimations of the fixation intensity per varion and the number of varions for a given pair of sequences, the correlation between the two fixation intensities and varion numbers of two different pairs of sequences need not be negative. Finally, REH theory is used to resolve a paradox concerning the high rate of covarion turnover and the nature of general function sites as permanent covarions.

Holmquist, R.↗

O I (7990 A) emission and radiative entrapment of auroral EUV

The auroral O I 7990-A multiplet intensity distribution has been observed by means of a 2-m grille spectrometer and a Fabry-Perot interferometer during 1977 and 1982, respectively, in Alaska. Grille spectrometer results indicate a nonstatistical distribution in the excited state, consistent with the preferential scattering of the O I 989-A EUV emission and in accord with recent radiative transfer calculations. A comparison of O I 7990-A intensities measured on the nightside with those from dayside magnetospheric cleft aurora shows a cascade contribution to the O I 8446-A line, and ultimately to the O I 1304-A transition, that depends on the altitude of the aurora. This is attributed to the greater radiative enhancement of O I 989-A at low altitude, and the correspondingly enhanced probability for branching from the 3 s-prime to the 3 p level in atomic O.

Christensen, A. B.↗

High energy irradiations simulating cosmic-ray-induced planetary gamma ray production. I - Fe target

Two thick Fe targets were bombarded by a series of 6 GeV proton irradiations for the purpose of simulating the cosmic ray bombardment of planetary objects in space. Gamma ray energy spectra were obtained with a germanium solid state detector during the bombardment, and 46 of the gamma ray lines were ascribed to the Fe targets. A comparison between observed and predicted values showed good agreement for Fe lines from neutron inelastic scattering and spallation reactions, and less satisfactory agreement for neutron capture reactions, the latter attributed to the difference in composition between the Fe target and the mean lunar abundance used in the modeling. Through an analysis of the irradiation results together with continuum data obtained in lunar orbit, it was found that 100 hours of measurement with a current instrument should generate a spectrum containing approximately 20 lines due to Fe alone, with a 2-sigma sensitivity for detection of about 0.2 percent.

Metzger, A. E.↗

Holographic optical interconnects for VLSI

This paper introduces new applications and design trade-offs anticipated for free-space optical interconnections of VLSI chips. New implementation s of VLSI functions are described that use the capability of making optical inputs at any point on a chip and take advantage of greater flexibility in on-chip signal routing. These include n-port addressable memories, CPU clock phase distribution, hardware multipliers, and dynamic memory refresh, as well as enhanced testability. Fault tolerance and production yields may be improved by reprogramming the optical imaging system to circumvent defective elements. These attributes, as well as those related to performance alone, will affect the design methodology of future VLSI ICs. This paper focuses on identifying the design issues, their possible solutions, and their impact on VLSI design techniques and, finally, presents some preliminary measurements on various system components.

Bergman, L. A.↗

Absolute gravity measurements in California, 1984-1989

Repeated absolute gravity measurements have been made at 12 sites in California between 1984.3 and 1989.7. As determined in laboratory tests, the instrument used has an estimated accuracy of 10 microgal (approximately 10 to the -8th g). The repeatability of the measurements is consistent with this accuracy assessment. No gravity changes above the limits set by instrumental uncertainty and environmental noise are observed during this period; the field observations provide upper limits on the rates of secular gravity changes which could be attributed to crustal deformation with a resolution corresponding to vertical displacement rates of 1-2 cm/yr.

Sasagawa, Glenn↗

Near-Mars space

The prevalent attributes of near-Mars space are described: the ambient interplanetary environment, the ionosphere, the upper atmosphere, and more remote regions that are affected by the presence of Mars. The descriptions are based on existing Martian data and/or models constructed from measurements made near Venus. Specific attention is given to the features of solar wind interaction with magnetospheric and ionospheric obstacles. The high-altitude plasma and field environment, the energetic particle environment, the ionosphere environment, and the neutral upper atmosphere environment are described with extensive graphic information, based on existing measurements collected from nine Martian missions. The ionospheric obstacle is assumed to prevail as a mechanism for describing the scenario. Martian perturbation of solar wind is theorized to be of a relatively small order. A distinctive local energetic particle population of planetary origin is shown to result from the direct interaction of solar wind plasma. This phenomenon is considered evidence of the important scavenging of planetary elements from Mars. The absence of a planetary dipole field around Mars, like its low gravity and distance from the sun, is considered important in determining the environment of this earthlike laboratory.

Luhmann, J. G.↗

Medium resolution spectra of the shuttle glow in the visible region of the spectrum

Recent spectral measurements of the visible shuttle glow (lambda = 400 - 800 nm) at medium resolution (1 nm) reveal the same featureless continuum with a maximum near 680 nm that was reported previously. This is also in good agreement with recent laboratory experiments that attribute the glow to the emissions of NO2 formed by the recombination of O + NO. The data that are presented were taken from the aft flight deck with a hand-held spectrograph and from the shuttle bay with a low-light-level television camera. Shuttle glow images and spectra are presented and compared with laboratory data and theory.

Viereck, R. A.↗

Engineering approach to the prediction of shock patterns in bounded high-speed flows

A two-dimensional symmetric wedge configuration representative of a single high-speed intake in steady flow was investigated. The analysis presented here is intended as an engineering approach for estimating certain features of the internal shock system. The primary interest here is the prediction of the size and location of the almost-normal shock wave that develops when the leading-edge shocks intersect at angles above a certain critical value that is less than the wedge detachment angle. The almost-normal shock wave is frequently referred to as the 'Mach stem', Parametric studies enabled the sensitivity of the Mach stem height to various flowfield parameters to be examined, thus indicating how accurately these parameters must be measured in a given experiment. Results of these predictions were compared with those of a steady-flow experiment performed at nominal freestream Mach numbers from 2.8 to 5. The predicted stem heights were consistently lower than the mean experimental values, attributable both to experimental uncertainties and to certain simplifying assumptions used in the analysis. Modification of these assumptions to better represent the test environment improved the analytical results.

Azevedo, D. J.↗

Experiences with the AEROnet/PSCN ATM Prototype

This paper discusses the experience gained by the AEROnet/PSCN networking team in deploying a prototype Asynchronous Transfer Mode (ATM) based network as part of the wide-area network for the Numerical Aerodynamic Simulation (NAS) Program at NASA Ames Research Center. The objectives of this prototype were to test concepts in using ATM over wide-area Internet Protocol (IP) networks and measure end-to-end system performance. This testbed showed that end-to-end ATM over a DS3 reaches approximately 80% of the throughput achieved from a FDDI to DS3 network. The 20% reduction in through-put can be attributed to the overhead associated with running ATM. As a result, we conclude that if the loss in capacity due to ATM overhead is balanced by the reduction in cost of ATM services, as compared to dedicated circuits, then ATM can be a viable alternative.

Kurak, Richard S.↗

Calibration of Air-Flow Meters for J33 Compressor Investigation

Flow-metering devices used by the NACA and by the manufacturer of the J33 turbojet engine were calibrated together to determine whether an observed discrepancy in weight flow of approximately 4 percent for the two separate investigations might be due to the different devices used to meter air flow. A commercial adjustable orifice and a square-edge flat-plate orifice used by the NACA and a flow nozzle used by the manufacturer were calibrated against surveys across the throat of the nozzle. It was determined that over a range of weight flows from 18 to 45 pounds per second the average weight flows measured by the metering device used for the compressor test would be 0.70 percent lower than those measured by the metering device used in the engine tests and the probable variation about this mean would be +/- 0.39 percent. The very close agreement of the metering devices shows that the greater part of the discrepancy in weight flow is attributable to the effect of inlet pressure.

Kovach, Karl↗

Lightning NO(x) Production and Its Consequences for Tropospheric Chemistry

Cloud-resolving case-study simulations of convective transport and lightning NO production have yielded results which are directly applicable to the design of lightning parameterizations for global chemical transport models. In this work we have used cloud-resolving models (the Goddard Cumulus Ensemble Model (GCE) and MMS) to drive an off-line cloud-scale chemical transport model (CSCTM). The CSCTM, in conjunction with aircraft measurements of NO(x) in thunderstorms and ground-based lightning observations, has been used to constrain the amount of NO produced per flash. Cloud and chemistry simulations for several case studies of storms in different environments will be presented. Observed lightning flash rates have been incorporated into the CSCTM, and several scenarios of NO production per intracloud (IC) and per cloud-to-ground (CG) flash have been tested for each storm. The resulting NO(x) mixing ratios are compared with aircraft measurements taken within the storm (typically the anvil region) to determine the most likely NO production scenario. The range of values of NO production per flash (or per meter of lightning channel length) that have been deduced from the model will be shown and compared with values of production in the literature that have been deduced from observed NO spikes and from anvil flux calculations. Results show that on a per flash basis, IC flashes are nearly as productive of NO as CG flashes. This result simplifies the lightning parameterization for global models (ie., an algorithm for estimating the ICKG ratio is not necessary). Vertical profiles of lightning NOx mass at the end of the 3-D storm simulations have been summarized to yield suggested profiles for use in global models. Estimates of mean NO production per flash vary by a factor of three from one simulated storm to another. When combined with the global flash rate of 44 flashes per second from NASA's Optical Transient Detector (OTD) measurements, these estimates and the results from other techniques yield global NO production rates of 2-9 TgN/year. Simulations of the photochemistry over the 24 hours following a storm has been performed to determine the additional ozone production which can be attributed to lightning NO. Convective transport of HO(x), precursors leads to the generation of a HO(x), plume which substantially aids the downstream ozone production.

Pickering, Kenneth E.↗

(abstract) Sciencecraft

The technological capabilities are now at hand to design an integrated system that combines science instruments, spacecraft, and propulsion elements into a single system. The authors have called this a sciencecraft since it is intended to provide automatic scientific observations of planetary and astrophysical objects. Integration of function allows lower mass and cost and supports a short development cycle. A specific science mission is described in this paper, a flyby of Neptune, Triton, and an object in the Kuiper belt. The SCIENCECRAFT system is described. It has electric propulsion and is capable of measuring the surface constituents and morphology of objects visited and characterizing their atmospheres both in emission and adsorption (against the Sun). Miniature fields and particles experiments are incorporated that will provide interplanetary information together with details of the magnetic and electric attributes of each object. The Sciencecraft is Delta launched and has a flight time to the Kuiper belt of 7 years. The design is such that the craft functions in a largely autonomous mode to provide low cost mission operations.

planetary astrophysics science instruments spacecr↗

Derivation of Sky-View Factors from LIDAR Data

The use of Lidar (Light Detection and Ranging), an active light-emitting instrument, is becoming increasingly common for a range of potential applications. Its ability to provide fine resolution spatial and vertical resolution elevation data makes it ideal for a wide range of studies. This paper demonstrates the capability of Lidar data to measure sky view factors (SVF). The Lidar data is used to generate a spatial map of SVFs which are then compared against photographically-derived SVF at selected point locations. At each location three near-surface elevations measurements were taken and compared with collocated Lidar-derived estimated. It was found that there was generally good agreement between the two methodologies, although with decreasing SVF the Lidar-derived technique tended to overestimate the SVF: this can be attributed in part to the spatial resolution of the Lidar sampling. Nevertheless, airborne Lidar systems can map sky view factors over a large area easily, improving the utility of such data in atmospheric and meteorological models.

spatial map↗

Drought Rapidly Diminishes the Large Net CO2 Uptake in 2011 Over Semi-Arid Australia

Each year, terrestrial ecosystems absorb more than a quarter of the anthropogenic carbon emissions, termed as land carbon sink. An exceptionally large land carbon sink anomaly was recorded in 2011, of which more than half was attributed to Australia. However, the persistence and spatially attribution of this carbon sink remain largely unknown. Here we conducted an observation-based study to characterize the Australian land carbon sink through the novel coupling of satellite retrievals of atmospheric CO2 and photosynthesis and in-situ flux tower measures. We show the 2010-11 carbon sink was primarily ascribed to savannas and grasslands. When all biomes were normalized by rainfall, shrublands however, were most efficient in absorbing carbon. We found the 2010-11 net CO2 uptake was highly transient with rapid dissipation through drought. The size of the 2010-11 carbon sink over Australia (0.97 Pg) was reduced to 0.48 Pg in 2011-12, and was nearly eliminated in 2012-13 (0.08 Pg). We further report evidence of an earlier 2000-01 large net CO2 uptake, demonstrating a repetitive nature of this land carbon sink. Given a significant increasing trend in extreme wet year precipitation over Australia, we suggest that carbon sink episodes will exert greater future impacts on global carbon cycle.

fluorescence↗

Meteoroids at the Moon: Orbital Properties, Surface Vaporization, and Impact Ejecta Production

We use a dynamical model to characterize the monthly and yearly variations of the lunar meteoroid environment for meteoroids originating from short and long‐period comets and the main‐belt asteroids. Our results show that if we assume the meteoroid mass flux of 43.3 tons per day at Earth, inferred from previous works, the mass flux of meteoroids impacting the Moon is 30 times smaller, approximately 1.4 tons per day, and shows variations of the order of 10% over a year. The mass flux difference is due to the combined effect of the smaller cross‐section of the Moon (factor of 13.46) and Earth's larger gravitational focusing (factor of 2–2.5). The lunar surface is vaporized by these impactors at an average impact vaporization flux of 11.6 × 10−16 g·cm−2·s−1, providing a significant source for the rarefied lunar exosphere. Our model predicts acceptable vaporization rates and reproduces the local time dependence of observations of the dust ejecta cloud, measured by the Lunar Dust Experiment on board NASA's Lunar Atmosphere and Dust Environment (LADEE) satellite. However, the predicted density of the lunar ejecta cloud is four orders of magnitude larger than reported values by LADEE. This discrepancy might be attributed to a much lower yield from meteoroid impacts on fluffy lunar regolith and/or a lower detection efficiency of the LADEE dust detector. We suggest an upper limit of 30 cm per million years for the soil gardening rate from small meteoroids.

Petr Pokorny↗

Results of magnetospheric barium ion cloud experiment of 1971

The barium ion cloud experiment involved the release of about 2 kg of barium at an altitude of 31 482 km, a latitude of 6.926 N., and a longitude of 74.395 W. Significant erosion of plasma from the main ion core occurred during the initial phase of the ion cloud expansion. From the motion of the outermost striational filaments, the electric field components were determined to be 0.19 mV/m in the westerly direction and 0.68 mV/m in the inward direction. The differences between these components and those measured from balloons flown in the proximity of the extremity of the field line through the release point implied the existence of potential gradients along the magnetic field lines. The deceleration of the main core was greater than theoretically predicted. This was attributed to the formation of a polarization wake, resulting in an increase of the area of interaction and resistive dissipation at ionospheric levels. The actual orientation of the magnetic field line through the release point differed by about 10.5 deg from that predicted by magnetic field models that did not include the effect of ring current.

Adamson, D.↗