SEARCH · Engineering Papers

Results for “analytical methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Status of two studies on active control of aeroelastic response at NASA Langley Research Center

The application of active control technology to the suppression of flutter was successfully demonstrated during two recent studies in the Langley transonic dynamics tunnel. The first study involved the implementation of an aerodynamic-energy criterion, using both leading- and trailing-edge controls, to suppress flutter of a simplified delta-wing model. Use of this technique resulted in an increase in the flutter dynamic pressure of approximately 12 percent for this model at a Mach number of 0.9. Analytical methods used to predict the open- and closed-loop behavior of the model are also discussed. The second study, which is a joint effort with the Air Force Flight Dynamics Laboratory, was conducted to establish the effect of active flutter suppression on a model of the Boeing B-52 Configured Vehicle (CCV). Some preliminary results of this study indicate significant improvements in the damping associated with the critical flutter mode.

Abel, I.↗

NASA NTRS1974

Calibration and evaluation of Skylab altimetry for geodetic determination of the geoid

The author has identified the following significant results. An analytical method for geodetic computation of the marine geoid (the geoid in the oceans) from satellite altimetry is developed and validated with data from Skylab mission SL-2. The criteria for achieving accurate scale and orientation of satellite altimetry geoid are shown to require marine geodetic control to offset systematic errors in the orbit (orientation is completely orbit dependent) and the altimeter data.

Mourad, A. G.↗

NASA NTRS1974

An assessment of separable fluid connector system parameters to perform a connector system design optimization study

The key to optimization of design where there are a large number of variables, all of which may not be known precisely, lies in the mathematical tool of dynamic programming developed by Bellman. This methodology can lead to optimized solutions to the design of critical systems in a minimum amount of time, even when there are a great number of acceptable configurations to be considered. To demonstrate the usefulness of dynamic programming, an analytical method is developed for evaluating the relationship among existing numerous connector designs to find the optimum configuration. The data utilized in the study were generated from 900 flanges designed for six subsystems of the S-1B stage of the Saturn 1B space carrier vehicle.

Prasthofer, W. P.↗

NASA NTRS1974

Transient cooling of solid bodies of classical form by radiation

An approximate analytic method is presented for analysis of the unsteady process of radiative cooling of solid bodies of classical form. The nonlinear heat transfer problem is solved by the cascade linearization technique with use of the iteration method. Comparison of the results obtained even in the first approximation with the available numerical solutions indicates adequate engineering accuracy of the proposed technique.

Novikov, V. S.↗

NASA NTRS1974

Role of man in flight experiment payloads, phase 1

The identification of required data for studies of Spacelab experiment functional allocation, the development of an approach to collecting these data from the payload community, and the specification of analytical methods necessary to quantitatively determine the role of man in specific Spacelab experiments are presented. A generalized Spacelab experiment operation sequence was developed, and the parameters necessary to describe each signle function in the sequence were identified. A set of functional descriptor worksheets were also drawn up. The methodological approach to defining the role of man was defined as a series of trade studies using a digial simulation technique. The tradeoff variables identified include scientific crew size, skill mix, and location. An existing digital simulation program suitable for the required analyses was identified and obtained.

Malone, T. B.↗

NASA NTRS1974

Skylab extravehicular mobility unit thermal simulator

The analytical methods, thermal model, and user's instructions for the Skylab Extravehicular Mobility Unit (SEMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the SEMU on the NASA-JSC Univac 1108 computer system. It accounts for conductive, convective, and radiant heat transfer as well as fluid flow and special component characterization. The program provides thermal performance predictions for a 967 node thermal model in one thirty-sixth (1/36) of mission time when operated at a calculating interval of three minutes (mission time). The program has the operational flexibility to: (1) accept card or magnetic tape data input for the thermal model describing the SEMU structure, fluid systems, crewman and component performance, (2) accept card and/or magnetic tape input of internally generated heat and heat influx from the space environment, and (3) output tabular or plotted histories of temperature, flow rates, and other parameters describing system operating modes.

Hixon, C. W.↗

NASA NTRS1974

Analysis of impingement heat transfer for two parallel liquid-metal slot jets

An analytical method is developed for determining heat transfer by impinging liquid-metal slot jets. The method involves mapping the jet flow region, which is bounded by free streamlines, into a potential plane where it becomes a uniform flow in a channel of constant width. The energy equation is transformed into potential plane coordinates and is solved in the channel flow region. Conformal mapping is then used to transform the solution back into the physical plane and obtain the desired heat-transfer characteristics. The analysis given here determines the heat-transfer characteristics for two parallel liquid-metal slot jets impinging normally against a uniformly heated flat plate. The liquid-metal assumptions are made that the jets are inviscid and that molecular conduction is dominating heat diffusion. Wall temperature distributions along the heated plate are obtained as a function of spacing between the jets and the jet Peclet number.

Siegel, R.↗

NASA NTRS1974

Hydrocarbons identified in extracts from estuarine water accommodated no. 2 fuel oil by gas chromatography-mass spectrometry

Results are presented on a computerized gas chromatograph-mass spectrometer analysis of methylene chloride and n-heptane extracts of a No. 2 fuel oil accommodated estuarine water sample. The analytical method is briefly described, and the limitations on the identifications are categorized. Some attempt was made to determine major and trace constituents in the water accommodate. Altogether 66 hydrocarbon compounds were identified specifically, and 75 compounds were partially identified. Seven compounds could be recognized as major constituents of the water accommodated oil and ten were present only as traces. The aromatic compounds found were alkyl benzenes, naphthalene, tetralin, indane, biphenyl, fluorene, anthracene, and some of their alkyl substituted isomers in the range of carbon numbers C7 to C15. Four n-alkanes, C10 to C13, were found along with four other assorted hydrocarbons.

Lewis, B. W.↗

NASA NTRS1973

Turbine noise generation and suppression

An analytical method for the prediction of turbine generated noise is discussed. The method links the duct acoustic modes with the turbomachinery aerodynamics. The results of the analysis are compared with turbine component and engine results. Component data on the effects of the variation of axial spacing between blade rows on turbine aerodynamics and acoustics are presented. The results of an experimental evaluation of the relative importance of turbine noise on highly suppressed bypass turbofans are discussed. The development of high temperature acoustic treatment and its application to high bypass turbofans are presented.

Benzakein, M. J.↗

NASA NTRS1973

Evaluation of digitally corrected ERTS imagery

Utilizing all digital processing techniques, precision rectified ERTS multispectral imagery have been produced. Precision geometric correction is accomplished by: (1) utilizing a low order piecewise approximation to the image distortions; (2) incorporating spacecraft attitude refinement derived from ground control points utilized in a Kalman filter; (3) utilizing interpolation techniques which preserve value and slope continuity in the image data. Imagery produced is represented in a UTM projection, and has been evaluated for precision by statistical and analytical methods. Extrapolations to modest size computers indicate good throughput with no sacrifice in precision.

Rifman, S. S.↗

NASA NTRS1973

Integral equation for small perturbations of irrotational flows

An investigation is conducted concerning the validity of analytical methods which are based on deriving an integral equation, taking into account small perturbations in the case of a nonuniform but irrotational flow. The results obtained apply to a wide Mach number range, but are restricted to small amplitude motions and to nonviscous flows. It is shown that the integral equation relating the unknown velocity potential to the known normal flow velocity can be derived from the appropriate Green's identity.

Haviland, J. K.↗

NASA NTRS1974

A transonic study of active flutter suppression based on an aerodymamic energy concept

The application of active control technology to the suppression of flutter has been successfully demonstrated in the Langley transonic dynamics tunnel. This study involved the implementation of an aerodynamic-energy criterion to suppress flutter of a simplified delta-wing model. Use of this technique with both leading- and trailing-edge active controls has resulted in an increase in dynamic pressure of 22% above the basic wing flutter point and with only a trailing-edge active control has resulted in an increase in dynamic pressure of 30% above the basic wing flutter point at a Mach number of 0.9. Analytical methods used to predict the open- and closed-loop behavior of the model are also discussed.

Sandford, M. C.↗

NASA NTRS1974

Review of NASA supercritical airfoils

NASA supercritical airfoils are characterized by a substantially reduced curvature of the midcord region of the upper surface together with increased camber near the trailing edge. The basic aerodynamic phenomena associated with the airfoils and representative wind tunnel results are discussed. The results indicate that the drag rise Mach numbers for NASA supercritical airfoils are 0.1 higher than for comparable NACA 6-series airfoils. A recent analytic method for predicting the aerodynamic characteristics of supercritical airfoils is described. The flight demonstration programs of three applications of supercritical airfoils utilizing the F-8, T-2C and F-111 as test beds are summarized.

Whitcomb, R. T.↗

NASA NTRS1974

Study of multilayered insulation pipe penetration. Thermal acoustic oscillation

Tests were conducted to determine the net heat leak to a source of liquid nitrogen caused by a metal penetration through the blanket of multilayer insulation. The conditions under which the tests were conducted are described. A graph of the theoretical and experimental temperature distribution is developed for comparison. The variables involved in the computer program to process the data are defined. A study was conducted to develop analytical methods for predicting the effect and magnitudes of thermoacoustic oscillations on the penetration heat leak to cryogens. The oscillations develop as a result of large thermal gradients imposed on a compressible fluid. The predominant amplitudes and frequencies of the thermal acoustic oscillations were investigated.

Lovin, J. K.↗

NASA NTRS1974

Scramjet nozzle design and analysis as applied to a highly integrated hypersonic research airplane

The configuration and performance of the propulsion system for the hypersonic research vehicle are discussed. A study of the interactions between propulsion and aerodynamics of the highly integrated vehicle was conducted. The hypersonic research vehicle is configured to test the technology of structural and thermal protection systems concepts and the operation of the propulsion system under true flight conditions for most of the hypersonic flight regime. The subjects considered are: (1) research vehicle and scramjet engine configurations to determine fundamental engine sizing constraints, (2) analytical methods for computing airframe and propulsion system components, and (3) characteristics of a candidate nozzle to investigate vehicle stability and acceleration performance.

Small, W. J.↗

NASA NTRS1973

Design Criteria for Low Profile Flange Calculations

An analytical method and a design procedure to develop flanged separable pipe connectors are discussed. A previously established algorithm is the basis for calculating low profile flanges. The characteristics and advantages of the low profile flange are analyzed. The use of aluminum, titanium, and plastics for flange materials is described. Mathematical models are developed to show the mechanical properties of various flange configurations. A computer program for determining the structural stability of the flanges is described.

Leimbach, K. R.↗

NASA NTRS1974

Orbit-spectrum sharing between the fixed-satellite and broadcasting-satellite services with applications to 12 GHz domestic systems

A systematic, tutorial analysis of the general problem of orbit-spectrum sharing among inhomogeneous satellite system is presented. Emphasis is placed on extrapolating and applying the available data on rain attenuation and on reconciling differences in the results of various measurements of the subjective effects of interference on television picture quality. An analytic method is presented for determining the approximate values of the intersatellite spacings required to keep mutual interference levels within prescribed limits when many dissimilar satellites share the orbit. A computer model was developed for assessing the interference compatibility of arbitrary configurations of large numbers of geostationary satellite systems. It is concluded that the band from 11.7 c GHz can be shared effectively by broadcasting-satellite and fixed-satellite systems. Recommendations for future study are included.

Reinhart, E. E.↗

NASA NTRS1975

Air pollution source identification

The techniques available for source identification are reviewed: remote sensing, injected tracers, and pollutants themselves as tracers. The use of the large number of trace elements in the ambient airborne particulate matter as a practical means of identifying sources is discussed. Trace constituents are determined by sensitive, inexpensive, nondestructive, multielement analytical methods such as instrumental neutron activation and charged particle X-ray fluorescence. The application to a large data set of pairwise correlation, the more advanced pattern recognition-cluster analysis approach with and without training sets, enrichment factors, and pollutant concentration rose displays for each element is described. It is shown that elemental constituents are related to specific source types: earth crustal, automotive, metallurgical, and more specific industries. A field-ready source identification system based on time and wind direction resolved sampling is described.

Fordyce, J. S.↗