Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ambient temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Extraction, Characterization, and Stability Studies of Bistriazinyl-Derived Carboxylic Acids

Separation of An(III) and Ln(III) ions will benefit the recycling of used nuclear fuel (UNF). For this purpose, many ligands have been tested over the years, and several separation processes have been successfully demonstrated on the laboratory scale. Current research aims at the development of new ligands that are built only with carbon, hydrogen, oxygen, and nitrogen (CHON), as they can be incinerated completely without secondary waste production. Here, we tested a new class of water-soluble ligands, the bistriazinyl-octa-carboxylic acids. One member, in particular, 2,6-bis-[5,6-di(3,4-dicarboxyphenyl)-1,2,4- triazin-3-yl]-pyridine (BTPOA), was found to be suitable for the selective separation of Am(III) and Cm(III) ions from Ln(III) ions and may act as a CHON alternative to its sulfonated analogue (SO 3 -Ph-BTP). BTPOA exhibited good extraction results and a high selectivity for Am(III) over Eu(III) ions. This ligand’s complexation of metal ions was further studied using potentiometric spectroscopy, as well as time-resolved laser-induced spectroscopy with Cm(III) and Eu(III) in aqueous HClO 4 and HNO 3 media. Conditional stability constants of each formed species were determined. In the HClO 4 system, Cm(III) formed three species (1:1, 1:2, and 1:3) through the stepwise addition of a single BTPOA molecule. On the other hand, in HNO 3 , Cm(III) formed two 1:2 complexes and one 1:3 complex, while the stepwise formation of three species was observed for Eu(III). The stability constants are comparable to the values for SO 3 -Ph-BTP. The radiolytic behavior of BTPOA was also investigated using electron pulse irradiation measurements to determine absolute rate coefficients (k) under ambient temperature conditions for the reaction of BTPOA with typical UNF reprocessing radical radiolysis products the hydrated electron (e aq − , k = (1.60 ± 0.02) × 10 10 M −1 s −1 ), the hydrogen atom (H • , k = (2.17 ± 0.03) × 10 9 M −1 s −1 ), and hydroxyl ( • OH, k = (6.95 ± 0.06) × 10 9 M −1 s −1 ) and nitrate (NO 3 • , k = (0.37 ± 0.02) × 10 7 M −1 s−1) radicals. These rate coefficients indicate that the radiolytic longevity of BTPOA should increase with HNO 3 concentration, owing to the consumption of e aq − /H • , by nitrate anions, and the replacement of • OH by the less reactive NO 3 • .

Diaz Gomez, Laura [Forschungszentrum Juelich (Germ↗
DOE OSTI2020

Solid-State Recrystallization Pathways of Sodium Aluminate Hydroxy Hydrates

Crystallization of Al-bearing solid phases from highly alkaline Na 2 O:Al 2 O 3 :H 2 O solutions commonly necessitates an Al 3+ coordination change from tetrahedral to octahedral, but intermediate coordination states are often difficult to isolate. Here, a similar Al 3+ coordination change process is examined during the solid-state recrystallization of sodium oxohydroxoaluminate hydrate (MSA) to nonasodium bis(hexahydroxy aluminate) trihydroxide hexahydrate (NSA) at ambient temperature. While the MSA structure contains solely polymerized tetrahedral Al 3+ , the NSA structure is a molecular aluminate salt solely based upon monomeric octahedral Al 3+ . Spontaneous recrystallization of MSA and excess sodium hydroxide hydrate into NSA over 3 days of reaction time was clearly evident in X-ray diffractograms and in Raman spectra. In situ 27 Al multiple quantum MAS NMR spectroscopy showed no evidence of intermediate aluminates, suggesting that intermediates, such as pentacoordinate Al 3+ , are short-lived and require more highly time resolved spectroscopies to detect. Such research is advancing upon detailed mechanistic understanding of Al 3+ coordination change mechanisms in these highly alkaline systems, with relevance to aluminum refining, corrosion sciences, and nuclear waste processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aerobic Partial Oxidation of Alkanes Using Photodriven Iron Catalysis

Photodriven oxidations of alkanes in trifluoroacetic acid using commercial and synthesized Fe(III) sources as catalyst precursors and dioxygen (O 2 ) as the terminal oxidant are reported. The reactions produce alkyl esters and occur at ambient temperature in the presence of air, and catalytic turnover is observed for the oxidation of methane in a pure O 2 atmosphere. Under optimized conditions, approximately 17% conversion of methane to methyl trifluoroacetate at more than 50% selectivity is observed. Furthermore, it is demonstrated that methyl trifluoroacetate is stable under catalytic conditions, and thus overoxidized products are not formed through secondary oxidation of methyl trifluoroacetate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transient Radiation-Induced Berkelium(III) and Californium(III) Redox Chemistry in Aqueous Solution

Despite the significant impact of radiation-induced redox reactions on the accessibility and lifetimes of actinide oxidation states, fundamental knowledge of aqueous actinide metal ion radiation chemistry is limited, especially for the late actinides. A quantitative understanding of these intrinsic radiation-induced processes is essential for investigating the fundamental properties of these actinides. We present here a picosecond electron pulse reaction kinetics study into the radiation-induced redox chemistry of trivalent berkelium (Bk(III)) and californium (Cf(III)) ions in acidic aqueous solutions at ambient temperature. New, and first of a kind, second-order rate coefficients are reported for the transient radical-induced reduction of Bk(III) and Cf(III) by the hydrated electron (eaq−) and hydrogen atom (H•), demonstrating significant reactivity (up to 1011M-1s-1) indicative of a preference of these metals to adopt divalent states. Additionally, we reportthe first-ever second-order rate coefficients for the transient radical-induced oxidation of these elements by reaction with hydroxyl (•OH) and nitrate (NO3•) radicals, which also exhibited fast reactivity (ca. 108 M-1s-1). Transient Cf(II), Cf(IV), and Bk(IV) absorption spectra are also reported. Overall, the presented data highlight the existence of rich, complex, intrinsic late actinide radiation-induced redox chemistry that has the potential to influence the findings of other areas of actinide science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chemical Kinetics for the Oxidation of Californium(III) Ions with Select Radiation-Induced Inorganic Radicals (Cl 2 •– and SO 4 •– )

Despite the availability of transuranic elements increasing in recent years, our understanding of their most basic and inherent radiation chemistry is limited and yet essential for accurate interpretation of their physical and chemical properties. Here, in this work, we explore the transient interactions between trivalent californium ions (Cf 3+ ) and select inorganic radicals arising from the radiolytic decomposition of common anions and functional group constituents, specifically the dichlorine (Cl 2 •- ) and sulfate (SO 4 •- ) radical anions. Chemical kinetics, as measured by integrated electron pulse radiolysis and transient absorption spectroscopy techniques, are presented for the reactions of these two oxidizing radicals with Cf 3+ ions. The derived and ionic strength corrected second-order rate coefficients (k) for these radiation-induced processes are k(Cf 3+ + Cl 2 •- ) = (8.28 ± 0.61) × 10 5 M -1 s -1 and k(Cf 3+ + SO 4 •- ) = (9.50 ± 0.43) × 10 8 M -1 s -1 under ambient temperature conditions (22 ± 1 °C).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Charge ordering and structural transition in the new organic conductor {delta}'-(BEDT-TTF){sub 2}CF{sub 3}CF{sub 2}SO{sub 3}.

We report structural, transport, and optical properties and electronic structure calculations of the delta'-(BEDT-TTF) 2CF3CF2SO3 (BEDT-TTF = bis(ethylenedithio)-tetrathiafulvalene) organic conductor that has been synthesized by electrocrystallization. Electronic structure calculations demonstrate the quasi-one-dimensional Fermi surfaces of the compound, while the optical spectra are characteristic for a dimer-Mott insulator. The single-crystal X-ray diffraction measurements reveal the structural phase transition at 200 K from the ambient-temperature monoclinic P2(1)/m phase to the low-temperature orthorhombic Pca2(1) phase, while the resistivity measurements clearly show the first order semiconductor-semiconductor transition at the same temperature. This transition is accompanied by charge-ordering as it is confirmed by splitting of charge-sensitive vibrational modes observed in the Raman and infrared spectra. The horizontal stripe charge-order pattern is suggested based on the crystal structure, band structure calculations, and optical spectra.

Olejniczak, Iwona↗
DOE OSTI2023

Calcium Cosalt Addition to Alter the Cation Solvation Structure and Enhance the Ca Metal Anode Performance

Accessing the energy density and sustainability of calcium metal batteries requires mastering reversible calcium electrodeposition through electrolyte design. Several electrolytes support reversible, ambient temperature deposition but at utilization and rate too low for practical applications. These challenges stem from solvation structures characterized by either high barriers for cation desolvation or thermodynamic instability, leading to parasitic decomposition of the salt and solvent. The optimal solvation structure for the effective delivery of calcium to the electrode interface is not known. In this work, we show that adding a relatively small amount of a weakly associating calcium salt (calcium carba-closo-dodecaborate) to an otherwise strongly associated solution (calcium borohydride in tetrahydrofuran) produces a surprising population of fully solvent-coordinated Ca2+ cations in the form of solvent-separated ion pairs (SSIPs). We further demonstrate that the formation of these SSIPs beneficially impacts the kinetics and thermodynamics of calcium electrodeposition, revealing the unexpected finding that direct coordination of Ca2+ by the BH4– anion limits the electrodeposition process. These findings reveal how the competition between solvent and anion coordination to Ca2+ affects calcium deposition kinetics and cycling stability, setting the stage for a new calcium electrolyte design based on mixed anion electrolytes.

Landers, Alan T.↗
DOE OSTI2023

Electron Spin Polarization and Rectification Driven by Chiral Perylene Diimide-Based Nanodonuts

The chirality-induced spin selectivity (CISS) effect allows thin-film layers of chiral conjugated molecules to function as spin filters at ambient temperature. Through solvent-modulated dropcasting of chiral l- and d-perylene diimide (PDI) monomeric building blocks, two types of aggregate morphologies, nanofibers and nanodonuts, may be realized. Spin-diode behavior is evidenced in the nanodonut structures. Stacked PDI units, which form the conjugated core of these nanostructures, dominate the nanodonut–Au electrode contact; in contrast, the AFM tip contacts largely the high-resistance solubilizing alkyl chains of the chiral monomers that form these nanodonuts. Current–voltage responses of the nanodonuts, measured by magnetic conductive AFM (mC-AFM), demonstrate substantial spin polarizations as well as spin current rectification ratios (>10) that exceed the magnitudes of those determined to date for other chiral nanoscale systems. Furthermore, these results underscore the potential for chiral nanostructures, featuring asymmetric molecular junctions, to enable CISS-based nanoscale spin current rectifiers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dependence of Linker Length and Composition on Ionic Conductivity and Lithium Deposition in Single-Ion Conducting Network Polymers

In this report, single-ion conducting electrolytes stand as promising alternatives to state-of-the-Art electrolytes in lithium batteries, although a single-ion conducting material with high Li + conductivity, stability in contact with lithium, and suitable mechanical properties has been slow to emerge. Here, we describe the synthesis of a series of single-ion conducting network polymers from the reaction of tetrakis(4-(chloromethyl)-2,3,5,6-Tetrafluorophenyl)borate with oligoethylene glycoxide linkers Li 2 O[(CH 2 CH 2 )O] n (n = 1, 2, 3, 9, and 22). Polymers with the longest linkers (n = 9 and 22; ANP-9 and ANP-10, respectively) form materials with conductivities of ~ 10 -6 S cm -1 at 100 °C. With the addition of 65 wt % propylene carbonate (PC), all the network polymers in the series exhibit high conductivities at ambient temperatures, with the n = 1 material (ANP-6) achieving a bulk ionic conductivity of 2.5 x 10 -4 S cm -1 at 25 °C. More conductive single-ion conducting gels could be prepared by using the less coordinating pentanediol dilithium salt as a linker (ANP-11; σ = 3.5 x 10 -4 S cm -1 at 25 °C), although this material exhibited a surprisingly high interfacial resistance in contact with a lithium electrode. In contrast, the gel formed with ANP-6 is notably stable in contact with metallic lithium electrodes, displays a lithium-ion transference number of unity, and boasts a wide electrochemical stability window of greater than 4.5 V. Temperature-dependent ac impedance analysis reveals that the ionic conductivity of this material-and likely the other gels in the series-matches closely to a Vogel-Tamman-Fulcher temperature model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Physical and Chemical Responses of Amidine-Containing Polymers in the Capture and Release of CO 2

Polymeric materials containing amidine motifs are of high interest due to their ability to reversibly capture and release CO 2 at ambient temperature. Here, in this study, we probe physical and chemical responses of styrene-based copolymers containing linear amidine motifs as functions of CO 2 and inert gas exposures and temperature. A copper-catalyzed azide–alkyne cycloaddition “click” reaction involving N′-propargyl-N,N-dimethylacetamidine is used to modify random copolymers, resulting in an array of linear amidine motifs along the chain backbone with the amount of CO 2 -active amidine controlled by the copolymer composition. Through thermogravimetric measurements, we demonstrate that the amidine-functionalized copolymers efficiently capture CO 2 upon exposure to a stream of CO 2 (at 27 °C) and release it at a slightly elevated temperature (50 °C) when exposed to an inert gas stream (N 2 ). In addition to displaying a maximum adsorption capacity of 22 wt % in the presence of pure CO 2 , the copolymers show composition-dependent direct air capture (DAC) behaviors. Small molecule analogs are used to definitively understand degradation via chemical hydrolysis of the amidine moiety, which leads to insolubility and a large reduction in CO 2 adsorption capacity (1.7 wt %). Neutron vibrational spectroscopy and DFT calculations confirm that CO 2 binds strongly to the amidine motif, inducing a strong bending of the CO 2 molecule from its linear geometry. The coupled insights into mechanisms and behaviors of CO 2 adsorption in amidine-functionalized polymers provides a foundation for future investigations of CO 2 -responsive polymers and soft materials to improve carbon capture and sequestration technologies.

Chun, Danielle J.↗
DOE OSTI2026

Inexpensive Hydrogen Storage: Propylene to Propane using Plasmonic Photocatalysis

Chemistry-based hydrogen storage media, such as liquid organic hydrogen carriers, offer an attractive alternative to physical hydrogen storage solutions. Here, we investigate propane as a possible hydrogen storage medium, attractive for its low cost and ease of availability. We report the ambient temperature and pressure hydrogenation of propylene using an antenna-reactor Al@TiO 2 −Pt single-atom plasmonic photocatalyst. Illumination at two distinct wavelengths, 450 and 800 nm, corresponds to high reactivity toward propane production. Theoretical insight into wavelength-dependent hot-carrier generation reveals nonequilibrium carriers with sufficient energies to activate both steps of propylene hydrogenation at either wavelength, the dissociation of H 2 and its incorporation into the propylene carbon− carbon double bond. Paired with light-driven propane dehydrogenation, this study demonstrates that photocatalytic cycling of propylene - propane for hydrogen storage and release can be performed under mild conditions.

alkyls↗
DOE OSTI2023

Reaction Layer Formation on MgO in the Presence of Humidity

Mineralization by MgO is an attractive potential strategy for direct air capture (DAC) of CO 2 due to its tendency to form carbonate phases upon exposure to water and CO 2 . Hydration of MgO during this process is typically assumed to not be rate limiting, even at ambient temperatures. However, surface passivation by hydrated phases likely reduces the CO 2 capture capacity. Here, we examine the initial hydration reactions that occur on MgO(100) surfaces to determine whether they could potentially impact CO 2 uptake. We first used atomic force microscopy (AFM) to explore changes in reaction layers in water (pH = 6 and 12) and MgO-saturated solution (pH = 11) and found the reaction layers on MgO are heterogeneous and nonuniform. To determine how relative humidity (R.H.) affects reactivity, we reacted samples at room temperature in nominally dry N 2 (~11–12% R.H.) for up to 12 h, in humid (>95% R.H.) N 2 for 5, 10, and 15 min, and in air at 33 and 75% R.H. for 8 days. X-ray reflectivity and electron microscopy analysis of the samples reveal that hydrated phases form rapidly upon exposure to humid air, but the growth of the hydrated reaction layer slows after its initial formation. Reaction layer thickness is strongly correlated with R.H., with denser reaction layers forming in 75% R.H. compared with 33% R.H. or nominally dry N 2 . The reaction layers are likely amorphous or poorly crystalline based on grazing incidence X-ray diffraction measurements. After exposure to 75% R.H. in air for 8 days, the reaction layer increases in density as compared to the sample reacted in humid N 2 for 5–15 min. Further, this may represent an initial step toward the crystallization of the reaction layer. Overall, high R.H. favors the formation of a hydrated, disordered layer on MgO. Based on our results, DAC in a location with a higher R.H. will be favorable, but growth may slow significantly from initial rates even on short timescales, presumably due to surface passivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable Catalytic Performance of Palladium Nanoparticles for H 2 O 2 Direct Synthesis via Surface-Bound Ligands

There is a critical need for sustainable routes to produce hydrogen peroxide, H 2 O 2 . A promising approach involves direct synthesis from molecular hydrogen and oxygen at (sub)ambient temperatures using unmodified supported Pd catalysts, which are limited by low selectivities. Controlling the environment of Pd active sites via surface ligands is shown to enhance selectivity. Trends among a myriad of surface ligands (i.e., phosphines, thiols, weakly bound molecules) suggest that those containing H-bonding groups lead to the highest H 2 O 2 production, potentially by affecting reaction energetics via H-bonding with key intermediates. These insights lay the groundwork for ligand design to achieve the optimal catalyst performance for H 2 O 2 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Catalytic Triad-Inspired Nanozyme Catalysts for Ester Hydrolysis in Organic Solvent Mixtures

We synthesized a series of molecular nanozyme catalysts containing functional groups (imidazole, carboxylic acid, and hydroxyl groups) inspired by the catalytic triad found in natural serine hydrolases. Different structural features were incorporated using two distinct synthesis routes to investigate the influence of interactions beyond the active site on catalytic activity in designing molecular nanozymes. Molecular dynamics simulations suggest that nanozyme activity is affected by structural features that influence nanozyme hydrophilicity and the organization of the local solvent environment. The most active nanozyme showed activity comparable to the enzyme α-chymotrypsin for the hydrolysis of a model ester (4-nitrophenyl 4- hydroxybenzoate) in a 95:5 (v/v%) water/acetonitrile mixture at ambient temperature. Increasing the temperature and organic solvent content decreases the activity of α-chymotrypsin while enhancing the activity of the nanozymes. The nanozymes can be immobilized on supported metal nanoparticles using a dithiol self-assembled monolayer, which facilitates their removal from the postreaction solution. These results demonstrate the potential in creating solvent-tolerant bioinspired catalysts, thereby combining the advantages of biocatalysts and chemical catalysts as next-generation industrial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The Stability of Nd Hydroxyl Complexes at Near Neutral to Alkaline pH from 25 to 75 °C: Implications for Monazite Solubility in Hydrothermal Aqueous Fluids

Speciation of rare earth elements (REE) in aqueous fluids controls their mobilization during fluid-rock interaction. Thermodynamic modeling provides important insights into the factors controlling REE mobility and fractionation in aqueous fluids, in which aqueous REE hydroxyl complexes are particularly important across a broad pH range. However, the stability of these REE hydroxyl complexes remains poorly determined due to limited experimental data above ambient temperature. In this work, UV–vis spectrophotometry experiments were conducted to determine the cumulative hydrolysis constants for neodymium (Nd) from 25 to 75 °C in near-neutral to alkaline solutions. The color indicator m -cresol purple was used to determine in situ pH. Alkaline NaOH-bearing aqueous solutions were doped with varying initial Nd concentrations (0 to ∼0.155 mmol/kg), which resulted in the release of protons (H + ) and pH decrease during hydrolysis of Nd 3+ according to Nd 3+ + n H 2 O = Nd(OH) n 3– n + H + . The average OH – ligand number coordinated to Nd 3+ was found to increase from 1.0 to 1.6 at 25 °C and from 1.2 to 2.8 at 75 °C over a pH range from 6.3 to 9.0. The measured speciation shows an increased predominance of Nd(OH) 3 0 over the Nd(OH) 2 + and Nd(OH) 2+ species with increased temperature and pH. The increasing cumulative formation constants (log*β° n , n = 1 to 3) retrieved from 25 to 75 °C differ by 0.1 to 1.9 logarithmic units in comparison to existing thermodynamic databases. These updated thermodynamic data have important implications for geochemical modeling of the speciation of Nd hydroxyl complexes and the solubility of monazite as a function of pH.

58 GEOSCIENCES↗
DOE OSTI2025

Radical Treatment of Haloacetonitriles in Aqueous Systems: A Kinetic Study

Haloacetonitriles (HANs) are important drinking water disinfection byproducts formed through the chlorination and chloramination of amino acids. Although HAN concentrations in treated water are usually lower than trihalomethanes, they are still of major concern due to their higher cyto- and genotoxicity. HANs undergo chemical transformations by hydrolysis on the hour to week time scales; however, for possible direct water reuse situations, their active removal using advanced oxidation/reduction processes (AO/RPs) may be required. We report here our systematic kinetic study of the four major AO/RP radiolysis species, oxidizing hydroxyl (·OH) and sulfate (SO 4 −· ) radicals and reducing hydrated electron (e aq − ) and hydrogen atoms (H · ) with five HANs (mono-, di-, and trichloroacetonitriles and mono- and dibromoacetonitriles) in water measured using electron pulse radiolysis techniques. At ambient temperatures and pH 1−7, significant reactivity was found for e aq − ( k = (1−5) × 10 10 M −1 s −1 ) and H · atoms ( k = (1 − 40 × 10 7 M −1 s −1 ), but only minimal oxidation by ·OH ( k = (0.6−10) × 10 7 M −1 s −1 ) and SO 4 −· ( k = (0.2−4) × 10 6 M −1 s −1 ) occurred. These data suggest that the large-scale AO/RP treatment of these contaminants will be effective for deaerated reducing systems, where the reductive electron-induced degradation of HANs will occur.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Processing Effects on the Self-Assembly of Brush Block Polymer Photonic Crystals

Here,the self-assembly of poly(dimethylsiloxane)-b-poly(trimethylene carbonate) (PDMS-b-PTMC) bottlebrush block polymers was investigated under different processing conditions. Small-angle X-ray scattering (SAXS) and UV/Visible spectroscopy provided insight into the self-assembly and structure in response to heating and applied pressure. In the absence of applied pressure (i.e., before annealing), the PDMS-b-PTMC bottlebrush block polymers are white solids and adopt small, randomly oriented lamellar grains. Heating the materials to 140 °C in the absence of applied pressure appears to “lock in” the isotropic, short-range-ordered state, preventing the formation of the long-range-ordered lamellar structure responsible for photonic properties. Applying modest anisotropic pressure (3 psi) between parallel plates at ambient temperature orients the short-range lamellar grains; however, applied pressure alone does not produce long-range order. Only when the bottlebrush block polymers were heated (>100 °C) under modest pressure (3 psi) were long-range-ordered photonic crystals formed. Analysis of the SAXS data motivated analogies to liquid crystals and revealed the potential self-assembly pathway. These results provide insight into the structure and self-assembly of bottlebrush block polymers with low glass transition temperature side chains in response to different processing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Effects of Morphology and Hydration on Anion Transport in Self-Assembled Nanoporous Membranes

Ordered nanoporous polymer membranes offer opportunities for systematically probing the mechanisms of ion transport under confinement and for realizing useful materials for electrochemical devices. Here, we examine the impact of morphology and ion hydration on the transport of hydroxide and bromide anions in nanostructured polymer membranes with 1 nm scale pores. We use aqueous lyotropic self-assembly of an amphiphilic monomer, with a polymerizable surfactant to create direct hexagonal (H I ) and gyroid mesophases. UV-induced cross-linking leads to the formation of nanoporous polymers with water continuous channels. The membranes are mechanically robust and chemically durable, resisting degradation during extended exposure to 1 M NaOH solutions. We use a combination of electrochemical impedance spectroscopy, pulsed-field gradient NMR spectroscopy, and molecular simulations to elucidate anion and water transport. The as-prepared hexagonal systems display higher conductivity and lower activation energies for both anions relative to the gyroid system. When compared at equivalent hydration, however, gyroid and hexagonal membranes show similar activation energies, with nearly identical conductivities at ambient temperatures. Both ionic conductivity and water diffusivity increase with increasing hydration. Here, the water uptake as a function of relative humidity for the hexagonal and gyroid mesophases ultimately dictates the water diffusion and magnitude of the ionic conductivity, with the hexagonal system showing overall higher capacity for hydration and thus faster ion transport. The durability of these materials under aggressive alkaline conditions and their relatively high hydroxide ion conductivity suggest that these nanostructured polymers could be of interest as membranes for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗