Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aerodynamic modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A methodology for using nonlinear aerodynamics in aeroservoelastic analysis and design

A methodology is presented for using the Volterra-Wiener theory of nonlinear systems in aeroservoelastic (ASE) analyses and design. The theory is applied to the development of nonlinear aerodynamic response models that can be defined in state-space form and are, therefore, appropriate for use in modern control theory. The theory relies on the identification of nonlinear kernels that can be used to predict the response of a nonlinear system due to an arbitrary input. A numerical kernel identification technique, based on unit impulse responses, is presented and applied to a simple bilinear, single-input-single-output system. The linear kernel (unit impulse response) and the nonlinear second-order kernel of the system are numerically-identified and compared with the exact, analytically-defined linear and second-order kernels. This kernel identification technique is then applied to the CAP-TSD code for identification of the linear and second-order kernels of a NACA64A010 rectangular wing undergoing pitch at M = 0.5, M = 0.85 (transonic), and M = 0.93 (transonic). Results presented demonstrate the feasibility of this approach for use with nonlinear, unsteady aerodynamic responses.

Silva, Walter A.↗
NASA NTRS1991

A methodology for using nonlinear aerodynamics in aeroservoelastic analysis and design

A methodology is presented for using the Volterra-Wiener theory of nonlinear systems in aeroservoelastic (ASE) analyses and design. The theory is applied to the development of nonlinear aerodynamic response models that can be defined in state-space form and are, therefore, appropriate for use in modern control theory. The theory relies on the identification of nonlinear kernels that can be used to predict the response of a nonlinear system due to an arbitrary input. A numerical kernel identification technique, based on unit impulse responses, is presented and applied to a simple bilinear, single-input single-output (SISO) system. The linear kernel (unit impulse response) and the nonlinear second-order kernel of the system are numerically-identified and compared with the exact, analytically-defined and linear and second-order kernels. This kernel identification technique is then applied to the CAP-TSD (Computational Aeroelasticity Program-Transonic Small Disturbance) code for identification of the linear and second-order kernels of a NACA64A010 rectangular wing undergoing pitch at M = 0.5, M = 8.5 (transonic), and M = 0.93 (transonic). Results presented demonstrate the feasibility of this approach for use with nonlinear, unsteady aerodynamic responses.

Silva, Walter A.↗
NASA NTRS1973

Longitudinal aerodynamic and propulsion characteristics of a propulsive-wing V/STOL model at high subsonic speeds

The aerodynamic and propulsion characteristics of a 1/6-scale propulsive-wing V/STOL air-powered model was investigated over the Mach number range from 0.40 to 0.96 and at angles of attack from -5 deg to 15 deg for several fan rotational speeds. Three fanduct-exit configurations were tested, including two exit areas. The model with 25-percent-thick wing had a drag-rise Mach number of 0.85, which is typical of aircraft with thinner, conventional, unswept wings.

Salters, L. B., Jr.↗
NASA NTRS2017

Effect of Ice Shape Fidelity on Swept-Wing Aerodynamic Performance

Low-Reynolds number testing was conducted at the 7 ft. x 10 ft. Walter H. Beech Memorial Wind Tunnel at Wichita State University to study the aerodynamic effects of ice shapes on a swept wing. A total of 17 ice shape configurations of varying geometric detail were tested. Simplified versions of an ice shape may help improve current ice accretion simulation methods and therefore aircraft design, certification, and testing. For each configuration, surface pressure, force balance, and fluorescent mini-tuft data were collected and for a selected subset of configurations oil-flow visualization and wake survey data were collected. A comparison of two ice shape geometries and two configurations with simplified geometric detail for each ice shape geometry is presented in this paper.

Scale models↗
NASA NTRS1958

Transonic-Wind-Tunnel Tests of the Aerodynamic Characteristics of a 0.15-Scale Model of the North American Aviation 255-Inch Fin-Stabilized External Store, Coord No. AF-AM-4

An investigation has been made in the Langley 8-foot transonic tunnels on the aerodynamic characteristics of a 0.15-scale model of the North American Aviation 255-inch fin-stabilized external store over a maximum Mach number range of 0.60 to 1.2 and on the effects of mounting lugs, of fin orientation, of fin aspect ratio, and of fixed-transition. The Reynolds number (based on a body length of 37.50 inches) varied from 9.8 x 10(exp 6) to 13.1 x 10(exp 6). The results indicate that the static margin of the finned store at low lift coefficients was only 9 percent of body length at subsonic Mach numbers and was reduced to zero at a Mach number of 1.0, Increasing the fin aspect ratio from 1.82 to 2.41 increased the subsonic static margin to 18 percent and provided a minimum margin of 9 percent near a Mach number of l.O. Store mounting lugs or fin orientation had only small effects on the aerodynamic characteristics of the basic store.

Fischetti, Thomas L.↗
NASA NTRS1935

The Aerodynamic Forces and Moments on a Spinning Model of the F4B-2 Airplane as Measured by the Spinning Balance

The aerodynamic forces and moments on a 1/12-scale model of the F4B-2 airplane were measured with the spinning balance in nine spinning attitudes with three sets of tail surfaces, namely, F4B-2 surfaces; F4B-4 fin and rudder with rectangular stabilizer; and with all tail surfaces removed. In one of these attitudes measurements were made to determine the effect upon the forces and moments of independent and of simultaneous displacement of the rudder and elevator for two of the sets of tail surfaces. Additional measurements were made for a comparison of model and full-scale data for six attitudes that were determined from flight tests with various control settings. The characteristics were found to vary in the usual manner with angle of attack and sideslip. The F4B-2 surfaces were quite ineffective as a source of yawing moments. The F4B-4 fin and F4B-2 stabilizer gave a greater damping yawing moment when controls were against the spin than did the F4B-2 surfaces but otherwise there was little difference. Substitution of a rectangular stabilizer for the F4B-2 stabilizer made no appreciable difference in the coefficient. Further comparisons with other airplane types are necessary before final conclusions can be drawn as to the relations between model and full-scale spin measurements.

SPINNING↗
NASA NTRSDate not supplied

Aerodynamic Assessment of Surface-Normal Active Flow Control for Lift Enhancement on the High-Lift Common Research Model

This study explores aerodynamic feasibility of small surface-normal pneumatic jets (micro-jets) for lift enhancement on the high-lift Common Research Model. To date, lift enhancement studies using microjets have been conducted at wind tunnel Reynolds numbers less than three and half million. This paper computationally investigates microjet effects at a flight Reynolds number of24.6million. Prior to microjet activation, it is shown that flow features such as trailing edge (TE) flow separation on both inboard and outboard flaps have noticeable sensitivity to Reynolds number. At the flight Reynolds number, the onset of TE flow separation shifts downstream resulting in less flow separation compared to at the wind tunnel Reynolds numberof3.26million. The effects are insignificant for lift enhancement due to microjet on the inboard flap. However, the effects are significant for lift enhancement on the outboard flap. Microjets are shown to be more effective in circulation control on the outboard flap at the higher Reynolds number. For a microjet with velocity ratio of one, lift enhancement is increased by17%at the flight Reynolds number. This highlights the sensitivity of microjet performance to the flow features of the configuration it is implemented on. Microjet lift enhancement trends at both Reynolds numbers are found to be consistent in their ability to move the lift curve upwards in the linear regime, with the lift enhancement related to microjet momentum coefficient throughΔ𝐶𝐿=𝐾√︁𝐶𝜇. Analysis of the impact microjets have on drag shows that microjets improve the configuration’s Oswald efficiency by5.4%and2.5%at the wind tunnel and flight Reynolds numbers respectively, while providing lift enhancement. Microjet effects on the trim drag are found to be less than one percent of the total drag. The results of this study highlight the potential of small surface-normal pneumatic jets for improved performance at high-lift conditions.

ARMD↗
DOE OSTI2023

Generalized filtered lifting line theory for arbitrary chord lengths and application to wind turbine blades

Abstract The filtered lifting line theory is an analytical approach used to solve the equations of flow subjected to body forces with a Gaussian distribution, such as used in the actuator line model. In the original formulation, the changes in chord length along the blade were assumed to be small. This assumption can lead to errors in the induced velocities predicted by the theory compared to full solutions of the equations. In this work, we revisit the original derivation and provide a more general formulation that can account for significant changes in chord along the blade. The revised formulation can be applied to wings with significant changes in chord along the span, such as wind turbine blades.

17 WIND ENERGY↗
NASA NTRS1971

Feasibility study for automatic reduction of phase change imagery

The feasibility of automatically reducing a form of pictorial aerodynamic heating data is discussed. The imagery, depicting the melting history of a thin coat of fusible temperature indicator painted on an aerodynamically heated model, was previously reduced by manual methods. Careful examination of various lighting theories and approaches led to an experimentally verified illumination concept capable of yielding high-quality imagery. Both digital and video image processing techniques were applied to reduction of the data, and it was demonstrated that either method can be used to develop superimposed contours. Mathematical techniques were developed to find the model-to-image and the inverse image-to-model transformation using six conjugate points, and methods were developed using these transformations to determine heating rates on the model surface. A video system was designed which is able to reduce the imagery rapidly, economically and accurately. Costs for this system were estimated. A study plan was outlined whereby the mathematical transformation techniques developed to produce model coordinate heating data could be applied to operational software, and methods were discussed and costs estimated for obtaining the digital information necessary for this software.

Nossaman, G. O.↗
NASA NTRS1973

Low-Speed Aerodynamic Characteristics of a Fuselage Model with Various Arrangements of Elongated Lift Jets

Data were obtained for a round jet located on the center of the bottom of a fuselage and for elongated slots separated spanwise by distances of 0.8 and 1.2 of the fuselage width. The effect of yawing the slots, inclining the jets laterally, and combining slot yaw with jet inclination was determined. Data were obtained in and out of ground effect through a range of effective velocity ratios and through a range of sideslip angles.

Vogler, R. D.↗
NASA NTRS1975

Low speed aerodynamic characteristics of a transport model having 42.33 deg swept low wing with supercritical airfoil, double-slotted flaps, and T-tail or low tail

A low-speed investigation was conducted in the Langley V/STOL tunnel over an angle-of-attack range of approximately 4 deg to 24 deg to determine the static longitudinal stability characteristics and high lift performance of a general research model which represented an advanced subsonic transport configuration. The model had a 42.33 deg swept, aspect ratio 7.05 wing with a supercritical airfoil and high lift system consisting of a leading edge device (slat or Kruger flap) and a double-slotted flap. The flaps were deflected for take off and landing configurations and were not deflected for tests of the clean configuration. The model was tested with the horizontal tail in either a T tail or low tail position. The effects of various arrangements of flowthrough nacelles which represent a three engine configuration (two large wing-mounted nacelles and a vertical tail mounted nacelle) and a four engine configuration (four smaller wing-mounted nacelles) were determined.

Fournier, P. G.↗