Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au–Vo–Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $\text{g}^{-1}_{\text{Au}} \text{h}^{–1}$) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Finally, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surface Density Dependent Catalytic Activity of Single Palladium Atoms Supported on Ceria

The analogy between single-atom catalysts (SACs) and molecular catalysts predicts that the specific catalytic activity of these systems is constant. Here we provide evidence that this prediction is not necessarily true. As a case in point, we show that the specific activity over ceria-supported single Pd atoms linearly increases with metal atom density, originating from the cumulative enhancement of CeO 2 reducibility. The long-range electrostatic footprints (≈1.5 nm) around each Pd site overlap with each other as surface Pd density increases, resulting in an observed deviation from constant specific activity. These cooperative effects exhaust previously active O atoms above a certain Pd density, leading to their permanent removal and a consequent drop in reaction rate. The findings of our combined experimental and computational study show that the specific catalytic activity of reducible oxide-supported single-atom catalysts can be tuned by varying the surface density of single metal atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Superior Metal‐Organic Framework Activation with Dimethyl Ether

Abstract Metal–organic frameworks (MOFs) are demonstrated to be readily activated by treatment with the low surface tension, low boiling point solvent dimethyl ether (DME). The mildness of the method enables access to high surface areas by avoiding structural changes in the framework that often plague thermal activation methods. A distinction from previous methods is that DME activation succeeds for materials with coordinatively unsaturated sites (CUS) and non‐CUS MOFs as well. DME displaces solvent molecules occupying the pores of the MOF as well as those coordinated to metal centers; reducing evacuation temperature by using a coordinating, yet highly volatile guest enables low temperature activation with structural retention as demonstrated surface area measurements that match or exceed existing activation protocols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Active Sites of Cobalt Phthalocyanine in Electrocatalytic CO 2 Reduction to Methanol

Many metal coordination compounds catalyze CO 2 electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure–reactivity correlation and reaction mechanism desperately demand elucidation. Here, in this study, we report the first in situ X-ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc-catalyzed CO 2 reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi-electron CO 2 reduction. CO, the key intermediate in the CO 2 -to-methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO 2 for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza-N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X-ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non-centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co−CO adduct during the catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au-Vo-Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $g^{-1}_{Au}$ h -1 ) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. In conclusion, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Propane Activation on Pt Electrodes at Room Temperature: Quantification of Adsorbate Identity and Coverage

Abstract C−H bond activation is the first step in manufacturing chemical products from readily available light alkane feedstock and typically proceeds via carbon‐intensive thermal processes. The ongoing emphasis on decarbonization via electrification motivates low‐temperature electrochemical alternatives that could lead to sustainable chemicals production. Platinum (Pt) electrocatalysts have shown activity towards reacting alkanes; however, little is known about propane electrocatalytic activation and conditions suitable for enabling selective oxidation to valuable products. Herein, we utilize a combination of electrochemical mass spectrometry (ECMS) and density functional theory (DFT) calculations to elucidate the potential dependence of propane activation on Pt electrocatalysts. Results show a strong dependence of adsorption on the applied potential in room‐temperature aqueous acidic electrolyte, with a maximum coverage of propane‐derived adsorbates at 0.30 V vs RHE. Using charge deconvolution and deuterated experiments, the mechanism of adsorption was elucidated, and C 3 H 2 * was determined as the average dehydrogenated propane‐derived adsorbate species. DFT calculations further corroborate these results, showing that the formation of deeply dehydrogenated species is energetically accessible at room temperature. The combined theoretical and experimental findings yield insights for selective activation of paraffinic C−H bonds at room temperature, aqueous conditions—a critical step towards decarbonized chemical manufacturing.

Chemistry↗
DOE OSTI2021

Effect of Carbon Doping on CO 2 –Reduction Activity of Single Cobalt Sites in Graphitic Carbon Nitride

Single atom catalysts have demonstrated interesting activity in a variety of applications. In this study, we prepared single C o2+ sites on graphitic carbon nitride (C 3 N 4 ), which was doped with carbon for enhanced activity in visible-light CO 2 reduction. The synthesized materials were characterized with a variety of techniques, including microscopy, X-ray powder diffraction, UV-vis spectroscopy, infrared spectroscopy, photoluminescence spectroscopy, and X-ray absorption spectroscopy. Here, doping C 3 N 4 with carbon was found to have profound effect on the photocatalytic activity of the single Co 2+ sites. At relatively low levels, carbon doping enhanced the photoresponse of C 3 N 4 in the visible region and improved charge separation upon photoactivation, thereby enhancing the photocatalytic activity. Furthermore, high levels of carbon doping were found to be detrimental to the photocatalytic activity of the single Co 2+ sites by altering the structure of C 3 N 4 and generating defect sites responsible for charge recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Structural and biochemical analysis of the metallo-β-lactamase L1 from emerging pathogen Stenotrophomonas maltophilia revealed the subtle but distinct di-metal scaffold for catalytic activity

Emergence of Enterobacteriaceae harboring metallo-beta-lactamases (MBL) has raised global threats due to their broad antibiotic resistance profiles and the lack of effective inhibitors against them. We have been studied one of the emerging environmental MBL, the L1 from Stenotrophomonas maltophilia K279a . We determined several crystal structures of L1 complexes with three different classes of beta-lactam antibiotics (penicillin G, moxalactam, meropenem, and imipenem), with the inhibitor captopril and different metal ions (Zn +2 , Cd +2 , and Cu +2 ). All hydrolyzed antibiotics and the inhibitor were found binding to two Zn +2 ions mainly through the opened lactam ring and some hydrophobic interactions with the binding pocket atoms. Without a metal ion, the active site is very similarly maintained as that of the native form with two Zn +2 ions, however, the protein does not bind the substrate moxalactam. When two Zn +2 ions were replaced with other metal ions, the same di-metal scaffold was maintained and the added moxalactam was found hydrolyzed in the active site. Differential scanning fluorimetry and isothermal titration calorimetry were used to study thermodynamic properties of L1 MBL compared with New Deli Metallo-beta-lactamase-1 (NDM-1). Both enzymes are significantly stabilized by Zn +2 and other divalent metals but showed different dependency. These studies also suggest that moxalactam and its hydrolyzed form may bind and dissociate with different kinetic modes with or without Zn +2 for each of L1 and NDM-1. Our analysis implicates metal ions, in forming a distinct di-metal scaffold, which is central to the enzyme stability, promiscuous substrate binding and versatile catalytic activity. Statement: The L1 metallo-beta-lactamase from an environmental multidrug-resistant opportunistic pathogen Stenotrophomonas maltophilia K279a has been studied by determining 3D structures of L1 enzyme in the complexes with several beta-lactam antibiotics and different divalent metals and characterizing its biochemical and ligand binding properties. We found that the two-metal center in the active site is critical in the enzymatic process including antibiotics recognition and binding, which explains the enzyme's activity toward diverse antibiotic substrates. This study provides the critical information for understanding the ligand recognition and for advanced drug development.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Unlocking plant-microbial interactions in deep Mollisols in the Midwestern US: Linking depth gradients in roots, microbial activity, and soil carbon in agroecosystems

Deep-rooted plants may build soil carbon (C) stocks, but most research has focused on shallow soils, leaving gaps in our understanding of how shifts in the balance between decomposition and C inputs drive soil C accumulation with depth. Thus, our objectives were to: (1) link depth gradients in root biomass with microbial activity and soil C stocks down to 1 m, and (2) examine the potential of simple C inputs to prime soil C across depths. To this end, we dug 5 quantitative soil pits in Argiudolls under mature perennial miscanthus plots in the SoyFACE Farm (Champaign-Urbana, IL). We added 13 C labeled glucose to our soils to determine the fate of simple C inputs with depth. We found that fine root biomass, total soil C, mineral-associated organic C (MAOC), particulate organic C (POC), and microbial activity (as measured by potential enzyme activity) declined with depth. POC declined more rapidly than MAOC, resulting in an increase in the ratio of MAOC-to-POC. Root biomass, enzyme activity (either acid phosphatase or n-acetyl-glucosaminadase) activity, and microbial respiration explained 74% and 38% of the variability in soil total C and MAOC, respectively, while POC was dependent on root biomass and microbial respiration (47%). Although the incorporation of simple 13 C inputs into MAOC was similar across depths, these inputs led to greater net MAOC losses in shallow soils than in deeper soils between 50 and 100 cm. The divergent impact of simple C inputs across depths may suggest that MAOC in shallow soils is more susceptible to priming losses, while C inputs into deep soils may instead be more persistent. Collectively, our results suggest that depth gradients in soil C stocks represents a balance between inputs, decomposition, and microbial necromass production and that increases in root C inputs by deep-rooted plants may have the potential to build stable MAOC.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

A computational study of how surfaces affect slip family activity

Plastic deformation behavior is most conveniently assessed by characterization on a surface, but whether such observations are representative of bulk properties is uncertain. Motivated by reported inconsistencies in slip resistance probed at different depths, we investigated (i) whether the average slip family activity is affected by the presence of a surface and (ii) how the kinematic nature of available slip families influences a potential surface effect. The slip family activity as a function of distance from the surface was extracted from full-field crystal plasticity simulations of random polycrystalline hexagonal close-packed (HCP) and body-centered cubic (BCC) metals as examples of mixed in contrast to universally-high numbers of slip systems per family. Under certain conditions, a deviation from bulk slip activity is observed up to about two grains from the surface. For the easiest (least slip-resistant) family, a surface effect of decreasing activity with depth emerges if the number of slip systems falls below about six. For harder families, slip activity always increases with depth. Furthermore, these phenomena are explained on the basis of varying constraints with depth in connection with the kinematic properties of slip families in the material.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The importance of delayed neutron precursors in gamma dose calculations for activated primary heat exchanger components in the Molten Salt Breeder Reactor

The Molten Salt Reactor (MSR) Multiphysics Applications technical area in the Nuclear Energy Advanced Modeling and Simulation program has supported the development of 3D Monte Carlo models of the Molten Salt Breeder Reactor (MSBR) over the last couple of years. This MSBR model was previously run with the Shift Monte Carlo code to perform radiation shielding calculations in the reactor cell area. The MSBR is a 2250 MWth (1000 MWe) liquid-fueled molten salt reactor design developed at Oak Ridge National Laboratory in the 1970s. Determining the source terms from activated primary heat exchanger (HX) components is important because delayed and prompt neutron fluxes incident on these components affect the dose rate in the primary HX maintenance areas. This information can be used in the development of remote handling procedures required during shutdown for maintenance. A methodology has been developed and is proposed in this paper to quantify the activated source term from the primary HX components as a result of the movement of the delayed neutron precursors in flowing primary fuel salt through the primary HXs in the MSBR. The goal of this research is to evaluate the gamma dose rates in the maintenance hatches above the primary HX using the activated HX source terms. The study showed that the gamma dose rates are approximately two orders of magnitudes higher when accounting for the neutron activation from the movement of delayed neutron precursors through the HXs than when flowing fuel is not considered. Thus, the movement of delayed neutron precursors must be taken into account for accurately predicting the neutron activation of primary loop components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Catalytic Activity and Water Stability of the MgO(111) Surface for 2-Pentanone Condensation

Nanomaterials derived from earth-abundant metal oxides have gained tremendous interest as catalysts; although, water stability remains a challenge. This study examines MgO(111) surfaces for 2-pentanone condensation and their evolution during D2O hydration. Catalyst screening confirmed the high activity of fresh MgO(111) for 2-pentanone condensation relative to conventionally prepared MgO(100). Computational modeling suggests that the (111) surface is readily hydroxylated, and that surface hydroxyls help stabilize the surface and reduce the barrier for 2-pentanone condensation. Vapor-phase D2O hydration after 3 min increased MgO(111) hydroxyls and retained surface area and activity; however, after 1 h, deuteroxide formation reduced the surface area and activity by >30 %. After 24 h, deuteroxide growth slowed down, and surface area and activity remained stable. This suggests MgO(111)-derived hydroxide may be the dominant surface responsible for 2-pentanone condensation following water exposure. Thermal regeneration of the 24-h sample restored 86 % of the surface area and 94 % of the activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Visualization of the surface distribution of photocatalytic activity at the anatase/rutile TiO2 interface using X-ray photoelectron emission microscopy

We applied X-ray photoelectron emission microscopy (XPEEM) to visualize the surface distribution of photocatalytic activity at the anatase/rutile (A/R) interface of titanium dioxide. Acetic acid was adsorbed on the surface, and its decomposition and desorption reactions under ultraviolet light irradiation were monitored by observing C 1s spectra, enabling direct observation of the spatial distribution of photocatalytic activity. Complementary crystal structure information was obtained using spatially resolved low-energy electron diffraction, low-energy electron microscopy, X-ray absorption spectroscopy, and micro-focused Raman spectroscopy. Comparison with these structural data allowed for the evaluation of the photocatalytic activity as a function of the distance from the A/R interface. The activity is enhanced in the vicinity of the interface and gradually decreases toward both the anatase and rutile regions. These results demonstrate that XPEEM is an effective technique for spatially resolved mapping of photocatalytic activity, which has\\r\\npreviously been inaccessible using conventional characterization techniques.

25 ENERGY STORAGE↗
DOE OSTI2023

Data-driven prediction of α IIb β 3 integrin activation paths using manifold learning and deep generative modeling

The integrin heterodimer is a transmembrane protein critical for driving cellular process and is a therapeutic target in the treatment of multiple diseases linked to its malfunction. Activation of integrin involves conformational transitions between bent and extended states. Some of the conformations that are intermediate between bent and extended states of the heterodimer have been experimentally characterized, but the full activation pathways remain unresolved both experimentally due to their transient nature and computationally due to the challenges in simulating rare barrier crossing events in these large molecular systems. An understanding of the activation pathways can provide new fundamental understanding of the biophysical processes associated with the dynamic interconversions between bent and extended states and unveil new putative therapeutic targets. In this work, we apply nonlinear manifold learning to coarse-grained molecular dynamics simulations of bent, extended, and two intermediate states of αI I b β3 integrin to learn a low-dimensional embedding of the configurational phase space. We then train deep generative models to learn an inverse mapping between the low-dimensional embedding and high-dimensional molecular space and use these models to interpolate the molecular configurations constituting the activation pathways between the experimentally characterized states. Furthermore, this work furnishes plausible predictions of integrin activation pathways and reports a generic and transferable multi-scale technique to predict transition pathways for biomolecular systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Chemical changes from N-doped graphene and Metal-Organic Frameworks to N-G/MOF composites for improved electrocatalytic activity

Integrating N doped graphene (N G) with Metal Organic Frameworks (MOFs) enhances catalytic activity for oxygen reduction reaction (ORR), often exceeding both the performances of their precursors and, in some cases, even PGM based catalysts. However, the factors driving this improved catalytic activity in N G/MOF composites remain unexplored, particularly from the perspective of the chemical changes. To investigate the chemical changes in N G and MOF upon their integration and the implications of these changes on ORR catalytic activity, an N G/MOF was synthesized from N G with a MOF (ZIF 8) following a mechanochemical wet ball milling process. The N G, ZIF 8, and N G/MOF samples were examined for changes in elemental composition, chemical state of carbon, different nitrogen and carbon bonds, and other chemical interactions. In the N G/MOF catalyst, compared to its N G and ZIF 8 precursors, the relative oxygen content increased, indicating the formation of additional oxygen containing groups. The C 1s peak shifted to a lower binding energy in N G/MOF, suggesting changes in the overall chemical or oxidation state of the carbon atoms. Besides, the increase in pyridinic N functional groups in N G/MOF points to the formation of additional active sites. Furthermore, the formation of C Zn bonds in N G/MOF suggests the probable emergence of single atom Zn sites, while the increase in C=O bonds points to the formation of carboxyl or carbonyl groups. These chemical changes could be linked to the enhanced electrocatalytic activity of the N G/MOF composite for ORR. In conclusion, this study may also be beneficial for other research focused on developing composite catalysts involving various N G and MOF materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Coupling AFEX and steam-exploded sugarcane residue pellets with a room temperature CIIII-activation step lowered enzyme dosage requirements for sugar conversion

In this study, the potential integration of steam explosion (StEx) and ammonia fiber expansion (AFEX) with existing sugar/ethanol mills to form decentralized pre-processing depots was explored. Both StEx and AFEX pretreatment facilitated the production of sugarcane bagasse (SCB) and cane leaf matter (CLM) pellets with significantly higher bulk density, mechanical durability, and hydrophobicity relative to their untreated biomass pellet controls. However, ethanol production from standalone StEx and AFEX-treated SCB and CLM pellets required enzyme dosages greater than 21 mg/g glucan to achieve enzymatic hydrolysis sugar yields of 75% and ethanol titres greater than 40 g.L -1 . Coupling AFEX-treated SCB or CLM pellets with a room temperature CIII I -activation step using liquid ammonia lowered enzyme dosage requirements by more than 50% without affecting ethanol titers and production yields (greater than300 L per Mg residual dry matter raw dry biomass (RDM)). In contrast, treating StEx-treated pellets with CIIII-activation using liquid ammonia did not result in similar enzyme dosage reductions, due to pseudo-lignin formation, leading to enzyme deactivation and/or lignin blockage that retarded enzymatic hydrolysis at low enzyme dosages. A gross energy conversion assessment revealed that low enzyme dosage (3-4 mg enzyme/g RDM) ethanol and electricity co-production from AFEX and CIII I -activated SCB and CLM can recover up to 73% of the energy in the untreated biomass, compared to 54% recovered by StEx and CIII I -activation. The results from this work suggest that StEx or AFEX based pre-processing depots can produce dense and mechanically durable biomass pellets. The AFEX-treated pellets can be easily upgraded using a room temperature CIII I -activation step at the biorefinery to significantly reduce bioconversion enzymes.

42 ENGINEERING↗