Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Y”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

ORION S-band data acquisition for S-Y calibration

Error sources in the Operational Radio Interferometry Observing Network (ORION) are addressed. Specifically, the performance of the S-band receiver and the optimum allocation of data volume between S- and X-band observations is studied. It is found that the requirements on the S-band receiver are not very stringent. The system temperature of the ORION S-band receiver has a very small effect on baseline determination accuracy. It is unwise to pay a high cost for an S-band receiver with a low system temperature; a system temperature as high as 240 K is tolerable. Only 20 to 40 percent of data volume is to be allocated to S-band observations for minimum baseline error. The error remains low over a rather wide range of data volume ratio. Hence precise allocation of the 14 pairs of the Mark 3 very long base interferometer data channels between S- and X-band observations is not critical.

Wu, S. C.↗
NASA NTRS1983

Proceedings of a Workshop on Assessment of Techniques for Measuring Tropospheric N sub x O sub y

Human impact on the troposphere, particularly on the regional to global scale is assessed. One area of required research is instrumentation development, which is aimed at improving the capability to measure important trace gases and aerosols which are key species in the major atmospheric biogeochemical cycles. To focus on specific needs, the Instrumentation Workshop for NxOy Tropospheric Species was conducted. The workshop discussed measurement needs and instrument capabilities for NxOy species, including NO, NO2, HNO3, HNO2, PAN, and NO3 aerosols. The status and measurement capabilities of various techniques (operational as well as conceptual) were discussed, along with future instrument and technology needs.

Source record↗
NASA NTRS1984

Assessment of Techniques for Measuring Tropospheric H Sub x O Sub Y: Summary

The objectives were: (1) to provide an assessment of the capability of the existing sensors of HxOy species at levels characteristic of the nonurban troposphere; (2) to identify those techniques adaptable to real-time measurement (sampled or continuous) onboard an aircraft platform; (3) to address the concern for intercalibration and intercomparison of techniques for measuring specific species; and (4) to recommend promising technologies for research and development for measuring important species for which a capability does not now exist or is presently of inadequate sensitivity.

Source record↗
NASA NTRS1985

IMF B(y)-dependent plasma flow and Birkeland currents in the dayside magnetosphere. II - A global model for northward and southward IMF

The qualitative convection pattern presented by Burch et al. (1984) is extended here to all interplanetary magnetic field orientations. The model of Burch et al. is based on the antiparallel merging hypothesis of Crooker (1979) with the addition of small but finite cells driven by quasi-viscous processes on the dawn and dusk edges of the polar cap. Although the treatment presented here is only qualitative, interesting predictions are made about newly observed phenomena, such as theta auroras.

Reiff, P. H.↗
NASA NTRS1985

Constraints on short-term mantle rheology from the J2 observation and the dispersion of the 18.6 y tidal Love number

Information derived from data recently acquired from the LAGEOS satellite is used to place some constraints on the rheological parameters of short-term mantle rheology. The validity of Lambeck and Nakiboglu's (1983) rheological model is assessed by formally developing an expression for the transformed shear modulus using a truncated retardation spectrum. This analytical formula is used to show that the parameters of the above mentioned model are not consistent at all with the amount of anelastic dispersion expected in the Chandler wobble and with the attenuation of seismic normal modes. The feasibility of a standard linear solid (SLS) rheology operating over intermediate timescales between 1 and 100 yr is investigated to determine whether the tidal dispersion at 18.6 yr can be explained by this model. An attempt is made to place some constraints on the parameters of the SLS model and the nature of short-term mantle rheology for timescales of less than 100 yr is discussed.

Sabadini, R.↗
NASA NTRS1985

Effect of the interplanetary magnetic field y component on the high-latitude nightside convection

Sondrestrom radar observations reveal that the dawn-dusk (By) component of the interplanetary magnetic field (IMF) strongly influences the nightside polar convection. This effect is quite complex. The convection for one orientation of By is not the mirror image of the other orientation. A positive By (i.e., pointing toward dusk) seems to organize the velocities such that, at all local times, they are predominantly westward within the radar field-of-view (approximately 68 deg-to-82 deg invariant latitude). Between dusk and midnight, on one such occasion, sunward flow is observed within the polar cap. In the midnight and dawn sectors, when By is negative, the plasma velocities often appear shifted toward early hours such that large southward velocities are observed about 3 hours before midnight. These are the only times when the predominant velocity component is southward.

De La Beaujardiere, O.↗
NASA NTRS1986

Distribution of nitrogen and defects in SiO(x)N(y)/Si structures formed by the thermal nitridation of SiO2/Si

Previously reported nitrogen distributions in SiO2 films on Si which have been thermally nitrided at 1000 C have been explained by a kinetic model of the nitridation process which rests upon the effects of interfacial strain. A critical test of this kinetic model is the validity of the predictions regarding nitrogen distributions obtained at other nitridation temperatures. In this work, nitrogen distributions determined via X-ray photoelectron spectroscopy are reported for samples nitrided at 800 and 1150 C, and are shown to be consistent with the kinetic model. In addition, the intensity of a fluorine marker is found to correlate with the nitrogen distribution, and is postulated to be related to kinetically generated defects in the dielectric film, consistent with the strain-dependent energy of formation of defects proposed recently to explain electrical data.

Vasquez, R. P.↗
NASA NTRS1988

Synthesis and characterization of high-T(sub c) screen-printed Y-Ba-Cu-O films on alumina

Thick films of YBa2Cu3O(sub 7-x) have been deposited on highly polished alumina substrates by the screen printing technique. To optimize the post-printing heat treatment, the films were baked at various temperatures for different lengths of time and oxygen-annealed at a lower temperature. The resulting films were characterized by electrical resistivity measurements, x-ray diffraction, and optical and scanning electron microscopy. Properties of the films were found to be highly sensitive to the post-printing thermal treatment. Films baked for 15 min at 1000 C in oxygen were hard, adherent, near single phase, and superconducting with T(sub c)(onset) approx 96 K, T(sub c)(zero) approx 66 K and Delta T sub c (10 to 90 percent) approx 10 K.

Bansal, Narottam P.↗
NASA NTRS1987

Cusp displacement at the magnetopause for large IMF Y component

The magnetic field orientation just earthward of the dayside magnetopause from 95 ISEE and 11 HEOS crossings with /By/ greater than /Bz/ in the adjacent magnetosheath indicate a statistically significant-1-earth-radius shift of the cusps toward dawn (dusk) in the Northern Hemisphere and dusk (dawn) in the Southern Hemisphere for positive (negative) By. This small shift near the magnetopause and the contrasting large shifts of some reported ionospheric cusp signatures are explained in terms of a finite thickness magnetopause model through which the cusps shift gradually from the inner to the outer edge.

Crooker, N. U.↗
NASA NTRS1988

Theoretical studies of the monoxides and monosulfides of Y, Zr, and Nb

Modified-CPF and CASSCF/multireference-CI theoretical calculations are presented for the ground and low-lying states of YO and YS, ZrO and ZS, and NbO and NbS. The techniques employed are explained, and the calculated spectroscopic constants are presented in extensive tables. Good agreement is found with published experimental data on the oxides, and it is inferred that the sulfide results are accurate as well. Particular attention is given to the high-lying quartet manifold of states in YO and the (1) 3Pi-a3Delta transition of ZrS (possibly the source of the IR Keenan bands seen in S-star spectra).

Langhoff, Stephen R.↗
NASA NTRS1990

Effect of shock pressure on the structure and superconducting properties of Y-Ba-Cu-O in explosively fabricated bulk metal-matrix composites

While it is now well established that copper-oxide-based powder, or virtually any other ceramic superconductor powder, can be consolidated and encapsulated within a metal matrix by explosive consolidation, the erratic superconductivity following fabrication has posed a major problem for bulk applications. The nature of this behavior was found to arise from microstructural damage created in the shock wave front, and the residual degradation in superconductivity was demonstrated to be directly related to the peak shock pressure. The explosively fabricated or shock loaded YBa2Cu3Ox examples exhibit drastically altered rho (or R) - T curves. The deterioration in superconductivity is even more noticeable in the measurement of ac magnetic susceptibility and flux exclusion or shielding fraction which is also reduced in proportion to increasing peak shock pressure. The high-frequency surface resistance (in the GHz range) is also correspondingly compromised in explosively fabricated, bulk metal-matrix composites based on YBa2Cu3O7. Transmission electron microscopy (including lattice imaging techniques) is being applied in an effort to elucidate the fundamental (microstructural) nature of the shock-induced degradation of superconductivity and normal state conductivity. One focus of TEM observations has assumed that oxygen displaced from b-chains rather than oxygen-vacancy disorder in the basal plane of oxygen deficient YBa2Cu3Ox may be a prime mechanism. Shock-wave displaced oxygen may also be locked into new positions or interstitial clusters or chemically bound to displaced metal (possibly copper) atoms to form precipitates, or such displacements may cause the equivalent of local lattice cell changes as a result of stoichiometric changes. While the shock-induced suppression of T(sub c) is not desirable in the explosive fabrication of bulk metal-matrix superconductors, it may be turned into an advantage if the atomic-scale distortion can be understood and controlled as local flux pinning sites.

Murr, L. E.↗
NASA NTRS1988

Synthesis and characterization of high-T(c) screen-printed Y-Ba-Cu-O films on alumina

Thick films of YBa2Cu3O(sub 7-x) have been deposited on highly polished alumina substrates by the screen printing technique. To optimize the post-printing heat treatment, the films were baked at various temperatures for different lengths of time and oxygen-annealed at a lower temperature. The resulting films were characterized by electrical resistivity measurements, X-ray diffraction, and optical and scanning electron microscopy. Properties of the films were found to be highly sensitive to the post-printing thermal treatment. Films baked for 15 min at 1000 C in oxygen were hard, adherent, near single phase, and superconducting with T(sub c) (onset) approx 96 KK, T(sub c) (zero) approx 66 K and Delta T sub c (10 to 90 percent) approx 10 K.

Bansal, Narottam P.↗
NASA NTRS1990

Ion beam sputtering of in situ superconducting Y-Ba-Cu-O films

Oriented superconducting YBa2Cu3O7 thin films were deposited on yttria stabilized zirconia and SrTiO3 substrates by ion-beam sputtering of a nonstoichiometric oxide target. The films exhibited zero-resistance critical temperatures as high as 83.5 K without post-deposition anneals. Both the deposition rate and the c-lattice parameter data displayed two distinct regimes of dependence on the beam power of the ion source. Low-power sputtering yielded films with large c-dimensions and low Tc. Higher-power sputtering produced a continuous decrease in the c-lattice parameter and increase in critical temperature. Films having the smaller c-lattice parameters were Cu rich. The Cu content of films deposited at beam voltages of 800 V and above increased with increasing beam power.

Klein, J. D.↗