Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Uranus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Communications constraints on a Jupiter probe mission

The use of the Saturn Uranus telemetry design for Jupiter entry requires the following qualifications in space probe data handling: A single dump substitute for the dual damp, a reduction in the neutral mass spectrometer rate, and providing that a second burn is made, a delta V correction.

Hinrichs, C.↗

Data link relay design

The data link for the Ames baseline probe as applied to the MJU spacecraft specifically with an entry at Uranus is analyzed. A frequency analysis, a trajectory analysis, and a discussion of the effects on the spacecraft design by the data link are presented. The possibilities of a two-way link are considered.

Parsons, P.↗

Digital receiver simulation

Digital simulation of the data link for the Saturn-Uranus spacecraft design is summarized. The data link is a 40 watt, 400 MegaHertz, 44 bit-a-second link, a power starved link, and uses convolution coding. Aspects of the link of particular interest are atmospheric scintillation and the Doppler to data rate ratio. The major characteristics of the scintillation are modeled in terms of tapped delay lines. A candidate system design and receiver design is developed. A computer flow diagram depicting a routine for the error rate and one for acquisition is presented. Various coding algorithms are analyzed since the convolution code is sensitive to the distribution of error and the actual pattern of the error.

Hinrichs, C.↗

Planetary quarantine impacts on probe design

The design of space probes for Saturn and Uranus and the effects of imposing planetary quarantine constraints on that design are discussed. Special attention was given to probability of contamination and procedures for eliminating contamination including dry heat.

Defrees, R. E.↗

Approach guidance for outer planet pioneer missions

Onboard optical approach guidance measurements for spin-stabilized Pioneer-type spacecraft are discussed. Approach guidance measurement accuracy requirements are outlined. The application concept and operation principle of the V-slit star tracker are discussed within the context of approach guidance measurements and measurables. It is shown that the accuracy of onboard optical approach guidance measurements is inherently coupled to the stability characteristics of the spacecraft spin axis. Geometrical and physical measurement parameters are presented for Pioneer entry probe missions to Uranus via Jupiter or Saturn flyby. The impact of these parameters on both sensor instrumentation and measurement system design is discussed. The need for sensing extended objects is shown. The feasibility of implementing an onboard approach guidance measurement system for Pioneer-type spacecraft is indicated. Two Pioneer 10 onboard measurement experiments performed in May-June 1974 are described.

Bejczy, A. K.↗

Feasibility study of low angle planetary entry

The feasibility of a Jovian entry by a probe originally designed for Saturn and Uranus entries is examined. An entry probe is described which is capable of release near an outer planet's sphere of influence and descent to a predetermined target entry point in the planet's atmosphere. The probe is designed so as to survive the trapped particle radiation belts and an entry heating pulse. Data is gathered and relayed to an overflying spacecraft bus during descent. Probe variations for two similar missions are described. In the first flyby of Jupiter by a Pioneer spacecraft launched during the 1979 opportunity is examined parametrically. In the second mission an orbiter based on Pioneer and launched in 1980 is defined in specific terms. The differences rest in the science payloads and directly affected wiring and electronics packages.

Defrees, R. E.↗

Radiative heating about outer planet entry probes

A study has been conducted to define the radiative, heating-rate distributions about spherically capped, 60 deg half-angle conical entry probes to the outer planets Jupiter, Saturn, and Uranus. The radiative heating rates are calculated by a direct method for the solution of the inviscid flow equations with coupled, nongray radiative transport. Results are presented for a range of entry conditions using the atmospheric models denoted as nominal, warm, and cool for each planet which show that both the magnitude and distribution of radiative heating rate are strongly dependent on the atmospheric model and the free-stream conditions.

Sutton, K.↗

Neptune - Observations of the H2 quadrupole lines in the /4-0/ band

The first measurement of Neptune's quadrupole H2 lines is reported. The equivalent widths of the S(0) and S(1) lines of the (4-0) band are given along with the corresponding widths measured from comparison spectra of Uranus taken on the same nights. These are interpreted in terms of both an inhomogeneous atmosphere overlying a reflecting layer and a homogeneous, semi-infinite, scattering atmosphere. Only the scattering model proves to be consistent with Neptune's spectrum in this wavelength region. The H2 abundance along the scattering mean free path is found to be less than the value for Rayleigh scattering in pure H2. This result is interpreted in terms of the presence of H2, CH4, and at least one other gas, instead of the more conventional interpretation in terms of the presence of an aerosol mixed with H2. Weak features in the continuum were observed. Their widths and the strength of the H2 features indicate that H2 is more abundant than the sum of the remaining gases in these atmospheres.

Trafton, L.↗

Commensurabilities of satellites' apsidal precession periods

The orientation of the major axis of Saturn's satellite Rhea librates about alignment with Titan's major axis. This behavior is a result of Titan's gravitational influence on Rhea. Similar effects may be important in the Uranian satellite system if they are enhanced by commensurabilities of apsidal precession periods. Extensive observations will be required if this possibility is to be confirmed. The effects of possible stable alignments have not been included in past analyses of the motions of Uranus' satellites, so the results of those studies should be accepted only tentatively.

Greenberg, R.↗

Simulation of planetary entry radiative heating with a CO2 gasdynamic laser

Heating encountered during entry into the atmospheres of Jupiter, Saturn, and Uranus is described, followed by a discussion of the use of a CO2 gasdynamic laser to simulate the radiative component of the heating. Operation and performance of the laser is briefly described. Finally, results of laser tests of some candidate heat-shield materials are presented.

Lundell, J. H.↗

Planetary geodesy

Work related to planetary geodesy conducted during the period from 1971 to 1975 is reviewed, taking into account the traditional subjects of geometrical and physical geodesy. Particular attention is given to the size and shape of the planets and to their masses and gravity fields. Improvements in the principal geodetic parameters of Mercury, Venus, and Mars are considered. Studies of the planets Jupiter, Saturn, Uranus, and Neptune are also discussed.

Anderson, J. D.↗

Planetary magnetospheres

Space-probe observations of planetary magnetospheres are discussed. Three different categories of planetary magnetospheres are identified (intrinsic slowly rotating, intrinsic rapidly rotating, and induced), and the characteristics of each type are outlined. The structure and physical processes of the magnetospheres of Mercury, Mars, and Jupiter are described, and possible configurations are presented for the Martian and Jovian ones. Expected magnetic moments are derived for Saturn, Uranus, and Neptune. Models are constructed for possible induced magnetospheres of the moon, Mercury, Venus, Mars, and Io.

Hill, T. W.↗

Outer planet entry probes aerothermal environment - Status of prediction methodology

A description is given of the computational codes that are to be used in studies of the heating and aerodynamic performance of entry probes for the scientific exploration of the planets Jupiter, Saturn, and Uranus. These codes include a time-asymptotic numerical method which takes into account radiative transport and equilibrium chemistry for the direct solution of the radiative, inviscid flow over an axisymmetric or two-dimensional body. The method considers both supersonic and subsonic flow in the downstream region. Another code represents a laminar, viscous-shock-layer solution.

Sutton, K.↗

Test evaluation of potential heat shield contamination of an Outer Planet Probe's atmospheric sampling system

An Outer Planets Probe which retains the charred heatshield during atmospheric descent must deploy a sampling tube through the heatshield to extract atmospheric samples for analysis. Once the sampling tube is deployed, the atmospheric samples ingested must be free of contaminant gases generated by the heatshield. Outgassing products such as methane and water vapor are present in planetary atmospheres and hence, ingestion of such species would result in gas analyzer measurement uncertainties. This paper evaluates the potential for, and design impact of, the extracted atmospheric samples being contaminated by heatshield outgassing products. Flight trajectory data for Jupiter, Saturn and Uranus entries are analyzed to define the conditions resulting in the greatest potential for outgassing products being ingested into the probe's sampling system. An experimental program is defined and described which simulates the key flow field features for a planetary flight in a ground-based test facility. The primary parameters varied in the test include: sampling tube length, injectant mass flow rate and angle of attack. Measured contaminant levels predict the critical sampling tube length for contamination avoidance. Thus, the study demonstrates the compatibility of a retained heatshield concept and high quality atmospheric trace species measurements.

Kessler, W. C.↗

Improved planetary orbit mission capabilities in the Shuttle era by use of space-storable propulsion systems

Planetary-orbit mission capabilities will be greatly improved by the advent of space-storable retropropulsion systems with liquid fluorine and hydrazine as bipropellants even when the Shuttle/Tug is used as launch vehicle. Having a specific impulse as large as 375 sec, a multimission propulsion module using space-storable propellants with Pioneer or Mariner spacecraft as payload can perform Mercury, Saturn, and Uranus orbiter missions, and even some comet rendezvous missions, more cost effectively and flexibly than one using earth-storable propellants. It also can reduce trip time to the outer planets significantly. This paper presents mission requirements, technology status, system design and performance, development schedules, and costs based on data derived in a recent design and feasibility study.

Meissinger, H. F.↗