SEARCH · Engineering Papers

Results for “Transversity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Concepts for improving the damage tolerance of composite compression panels

The residual strength of specimens with damage and the sensitivity to damage while subjected to an applied inplane compression load were determined for flatplate specimens and blade-stiffened panels. The results suggest that matrix materials that fail by delamination have the lowest damage tolerance capability. Alternate matrix materials or laminates which are transversely reinforced suppress the delamination mode of failure and change the failure mode to transverse shear crippling which occurs at a higher strain value. Several damage-tolerant blade-stiffened panel design concepts are evaluated. Structural efficiency studies conducted show only small mass penalties may result from incorporating these damage-tolerant features in panel design. The implication of test results on the design of aircraft structures was examined with respect to FAR requirements.

Rhodes, M. D.↗

NASA NTRS1984

Geomorphic clues to the Martian volatile inventory: Landslides

Eight landslide locales were selected in Valles Marineris for preliminary geomorphological mapping. Four main suites of morphological features were identified. In four order outward from the head scarp they are: (1) large ridges in head area, transverse to movement direction, probably slump blocks or pieces of wall that fell or toppled, possibly backward rotated; (2) smaller ridges, convex toward distal edge of slides, many with lobate pattern, some possibly step like scarps rather than ridges; (3) thin, sheet like debris cover, forms discrete fan shaped lobe with edge scarps unconfined; and (4) low transverse, continuous ridges (possibly folds) found at distal edge of slides, where debris appears to have encountered obstructions (e.g., opposing canyon walls), but not all confined slides exhibit this feature. Any one landslide can possess all or some of these features. Slides in the western Valles Marineris are more complex and show more variety than those in the eastern part.

Pieri, D.↗

NASA NTRS1984

Dilution jets in accelerated cross flows

Results of flow visualization experiments and measurements of the temperature field produced by a single jet and a row of dilution jets issued into a reverse flow combustor are presented. The flow in such combustors is typified by transverse and longitudinal acceleration during the passage through its bending section. The flow visualization experiments are designed to examine the separate effects of longitudinal and transverse acceleration on the jet trajectory and spreading rate. A model describing a dense single jet in a lighter accelerating cross flow is developed. The model is based on integral conservation equations, including the pressure terms appropriate to accelerating flows. It uses a modified entrainment correlation obtained from previous experiments of a jet in a cross stream. The flow visualization results are compared with the model calculations in terms of trajectories and spreading rates. Each experiment is typified by a set of three parameters: momentum ratio, density ratio and the densimetric Froude number.

Lipshitz, A.↗

NASA NTRS1984

Resistance-foil strain-gage technology as applied to composite materials

A general review of existing strain-gage technologies as applied to orthotropic-composite materials is given. The specific topics addressed are gage-bonding procedures, transverse-sensitivity effects, errors due to gage misalignment, and temperature-compensation methods. The discussion is supplemented by numerical examples where appropriate. It is shown that the orthotropic behavior of composites can result in experimental error which would not be expected based on practical experience with isotropic materials. In certain cases, the transverse sensitivity of strain gages and/or slight gage misalignment can result in strain-measurement errors exceeding 50 percent.

Tuttle, M. E.↗

NASA NTRS1983

Thermal degradation of the tensile properties of undirectionally reinforced FP-Al2O3/EZ 33 magnesium composites

The effects of isothermal and cyclic exposure on the room temperature axial and transverse tensile strength and dynamic flexural modulus of 35 volume percent and 55 volume percent FP-Al203/EZ 33 magnesium composites were studied. The composite specimens were continuously heated in a sand bath maintained at 350 C for up to 150 hours or thermally cycled between 50 and 250 C or 50 and 350 C for up to 3000 cycles. Each thermal cycle lasted for a total of six minutes with a hold time of two minutes at the maximum temperature. Results indicate no significant loss in the room temperature axial tensile strength and dynamic flexural modulus of composites thermally cycled between 50 and 250 C or of composites isothermally heated at 350 C for up to 150 hours from the strength and modulus data for the untreated, as-fabricated composites. In contrast, thermal cycling between 50 and 350 C caused considerable loss in both room temperature strength and modulus. Fractographic analysis and measurement of composite transverse strength and matrix hardness of thermally cycled and isothermally heated composites indicated matrix softening and fiber/matrix debonding due to void growth at the interface and matrix cracking as the likely causes of the strength and modulus loss behavior. Previously announced in STAR as N82-21260

Bhatt, R.T.↗

NASA NTRS1984

High precision active nutation control for a flexible momentum biased spacecraft

The controller design for the Solar Dynamics Observatory (SDO) is presented. SDO is a momentum biased spacecraft with three flexible appendages. Its primary scientific instrument, the solar oscillations imager (SOI), is rigidly attached to the spacecraft bus and has arc-second pointing requirements. Meeting these requirements necessitates the use of an active nutation controller (ANC) which is here mechanized with a small reaction wheel oriented along a bus transverse axis. The ANC does its job by orchestrating the transfer of angular momentum out of the bus transverse axes and into the momentum wheel. A simulation study verifies that the controller provides quick, stable, and accurate response.

Laskin, R. A.↗

NASA NTRS1983

Damping mechanisms in fiber reinforced laminates

Low strain damping in fiber reinforced composite materials is due to material loss factors in both fibers and matrix materials. The high modulus of the fibers makes up for the low damping factor. Strains high enough to cause transverse layer cracking in laminates with organic matrix materials causes a large permanent increase in the damping factor. This increase is not due to the transverse cracks but rather to short microcracks in the high shear strain regions. Other damping mechanisms at high strains are also discussed.

Plunkett, R.↗

NASA NTRS1984

Observation of an oscillating magnetic field shell at three locations

The complex magnetic-pulsation event near magnetic shell L = 4.5 at 1830-1930 UT on July 14, 1982, is characterized on the basis of observations obtained by the DE-1 satellite near the equator and by magnetic stations at Siple, Antarctica, and Roberval, Quebec, Canada, at opposite ends of the L = 4.2 field line. The data are presented graphically and discussed in the light of theoretical models. The main features (in sequence) observed were a brief 120-sec compressional pulsation, a 5-nT 180-sec transverse pulsation, a weak 44-sec transverse pulsation, and a rapidly developing 240-sec azimuthal pulsation. The 180-sec and 240-sec pulsations are found to be large-scale toroidal oscillations on one and two resonant shells, respectively, while the 44-sec pulsation appears to be more localized.

Cahill, L. J.↗

NASA NTRS1984

A tomographic image of mantle structure beneath southern California

The variations in seismic structure beneath southern California were determined by using a tomographic method of inversion on teleseismic P delays recorded with the Southern California Array. The inversion reveals two prominent features beneath the region. The first is a thin, vertical wedge directly beneath the Transverse Ranges that is 2-3 percent faster than the surrounding region. This feature deepens to the east, attaining a maximum depth of about 250 km beneath the San Bernardino Mountains. The second feature is a major zone of low velocity material that is 2-4 percent slow under the Salton Trough rift valley, extending to a depth of about 125 km. Two possible explanations for the spatial association of the Transverse Ranges with the velocity anomaly below are lithospheric subduction or small-scale sublithospheric convection in the region of the Big Bend of the San Andreas Fault. The low velocity anomaly beneath the Salton Trough is consistent with convective upwelling there.

Humphreys, E.↗

NASA NTRS1984

Three-dimensional viscous flows with large secondary velocity

A new system of approximation equations is derived for three-dimensional steady viscous compressible flows in which a primary-flow direction is present, but in which both transverse velocity components can be large. Previous approaches which address simplification of the steady Navier-Stokes equations are discussed, and a new approach is proposed. The transverse velocity vector which corrects a given potential flow has been decomposed into potential and rotational components. It is found that the potential-velocity vector may be assumed small, whereas the rotational-velocity vector may be assumed small, whereas the rotational velocity vector and hence the composite secondary flow can be of order unity. This assumption leads to a system of governing equations whose characteristic polynomial has a non-elliptic form for arbitrary Mach numbers. The resulting non-elliptic approximation equations can be solved as an initial/boundary-value problem. Computed results confirm the small scalar-potential approximation.

Briley, W. R.↗

NASA NTRS1984

Influence of damage on the thermal response of graphite-epoxy laminates

A constrained-displacement finite-element approach for studying the influence of transverse cracks and delaminations on the thermal response of laminated composites is presented. Typical results are given in the form of percent-retention curves for the coefficient of thermal expansion as a function of crack density. Cross-ply and quasi-isotropic T300/5208 graphite-epoxy laminates are considered. It is shown that transverse cracks can have a significant influence on the coefficient of thermal expansion, but delaminations located symmetrically about the laminate midplane have no influence on thermal expansion.

Adams, D. S.↗

NASA NTRS1986

Polarizing Filter for Integrated Optics

Polarizing filter for titanium-doped lithium niobate light waveguide suppresses transverse magnetic (TM) mode of light propagation while allowing transverse electric (TE) mode to continue on its way. Filter - lithium niobate crystal - is expected to find many applications in integrated optical circuits.

Ramer, O. G.↗

NASA NTRS1984

Investigations of flow field perturbations induced on slotted transonic-tunnel walls

The free-stream interference caused by the flow through the slotted walls of the test sections of transonic wind tunnels has continuously a problem in transonic tunnel testing. The adaptive-wall transonic tunnel is designed to actively control the near-wall boundary conditions by sucking or blowing through the wall. In order to make the adaptive-wall concept work, parameters for computational boundary conditions must be known. These parameters must be measured with sufficient accuracy to allow numerical convergence of the flow field computations and must be measured in an inviscid region away from the model that is placed inside the wind tunnel. The near-wall flow field was mapped in detail using a five-port cone probe that was traversed in a plane transverse to the free-stream flow. The initial experiments were made using a single slot and recent measurements used multiple slots, all with the tunnel empty. The projection of the flow field velocity vectors on the transverse plane revealed the presence of a vortex-like flow with vorticity in the free stream. The current research involves the measurement of the flow field above a multislotted system with segmented plenums behind it, in which the flow is controlled through several plenums simultaneously. This system would be used to control a three-dimensional flow field.

Wu, J. M.↗

NASA NTRS1985

Resistance fail strain gage technology as applied to composite materials

Existing strain gage technologies as applied to orthotropic composite materials are reviewed. The bonding procedures, transverse sensitivity effects, errors due to gage misalignment, and temperature compensation methods are addressed. Numerical examples are included where appropriate. It is shown that the orthotropic behavior of composites can result in experimental error which would not be expected based on practical experience with isotropic materials. In certain cases, the transverse sensitivity of strain gages and/or slight gage misalignment can result in strain measurement errors.

Tuttle, M. E.↗

NASA NTRS1985

A Galerkin method for the estimation of parameters in hybrid systems governing the vibration of flexible beams with tip bodies

An approximation scheme is developed for the identification of hybrid systems describing the transverse vibrations of flexible beams with attached tip bodies. In particular, problems involving the estimation of functional parameters are considered. The identification problem is formulated as a least squares fit to data subject to the coupled system of partial and ordinary differential equations describing the transverse displacement of the beam and the motion of the tip bodies respectively. A cubic spline-based Galerkin method applied to the state equations in weak form and the discretization of the admissible parameter space yield a sequence of approximating finite dimensional identification problems. It is shown that each of the approximating problems admits a solution and that from the resulting sequence of optimal solutions a convergent subsequence can be extracted, the limit of which is a solution to the original identification problem. The approximating identification problems can be solved using standard techniques and readily available software.

Banks, H. T.↗

NASA NTRS1984

Connection system

A mechanical connection system comprises a first body defining a receptable and a second body defining a pin matingly receivable in the receptacle by relative movement in a first directional mode. A primary latch is engagable between the two bodies to retain the pin in the receptacle. The primary latch is reciprocable in a second directional mode transverse to the first directional mode. A lock member carried by one of the bodies is operatively associated with the primary latch and movable, transverse to the second directional mode, between a locking position maintaining engagement of the primary latch and a releasing position permitting release of the primary latch. The lock includes an operator portion engagable to move the lock member from its locking position to its releasing position. The operator is located internally of the first body. An actuator is selectivity insertable into and disengagable from the first body. The actuator is movable relative to the first body when it is inserted for engagement with and operation of the operator.

Mccandless, B., II↗

NASA NTRS1985

Graphic displays of vector magnetograph data

Graphic displays that have proved useful in dealing with vector magnetograph data are summarized in three settings: real-time control, analysis, and final presentation. Among the topics discussed are: flexible, implicit data-scaling; geometrical transformations; methods of comparing fields (e.g., transverse vs. longitudinal; observed vs. computed; one time vs. another); displaying the magnitude and direction of the transverse field; minimizing the display time of serial graphics devices; graphic file structure; and graphic interaction with operators and observers.

Rabin, D. M.↗

NASA NTRS1985

Structural characteristics of high temperature composites

A progress report is presented for research carried from March 1984 through February 1985. A tensile test method has been developed which should give tensile and simulated shear (+ or - 45 deg) data for fiber composites up to 1000 C. Longitudinal and some transverse stress-strain data have been obtained for a glass matrix/Nicalon fiber system up to the matrix limiting temperature of 600 C. This demonstrates the functioning of the test method and the high temperature test facility which has been established on this grant. Transverse and longitudinal compression tests have been run, mostly in an end loaded configuration. A more satisfactory compression test is still required, and is under development.

Mandell, J. F.↗