Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Titanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

New M{sub (2 + δ1)}X{sub (2 + δ2)} Superstructure of Ordered Nanocrystalline Titanium Monoxide and the Problem of Transition States

The results of experiments on the vacancy ordering in nanocrystalline nonstoichiometric titanium monoxide TiO{sub y} (space group Fm 3-bar m), which is accompanied by the formation of the orthorhombic Ti{sub 9}O{sub 10} phase (space group Immm), are considered. The vacancy distribution in the ordered phase is described by a two-sublattice-ordering M{sub (2 + δ1)}X{sub (2 + δ2)} superstructure. The disorder–order (TiO{sub y}–Ti{sub (2 + δ1)}O{sub (2 + δ2)}) phase transition is accompanied by symmetry distortions along non-Lifshitz star {k_4}. When ordering, vacancies concentrate in every third (110) plane of the basic B1-type structure. The deviation of stoichiometry is caused by different vacancy concentrations in the defect planes in the metallic and nonmetallic sublattices (parameters δ{sub 1} and δ{sub 2}, respectively). The new class of M{sub (n + δ1)}X{sub (n + δ2)} superstructures is shown to generate numerous order–disorder transition state models, which cannot be described in terms of the mean-field approximation. At δ{sub 1} = δ{sub 2} = 0.5, the orthorhombic M{sub (2 + δ1)}X{sub (2 + δ2)} structure is a particular case of the partly disordered monoclinic M{sub 5}X{sub 5} superstructure (space group C2/m(A2/m)), which is characteristic of a coarse-grained state.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nucleosynthesis at Strong Magnetization and the Titanium Problem

Ultramagnetized atomic nuclei created in supernova explosions, neutron star mergers, magnetar crusts and heavy ion collisions are considered. It is shown that for field strengths of 0.1–10 teratesla, the linear magnetic response dominates and the Zeeman effect leads to an increase in the binding energy of atomic nuclei with open shells. Considerable increase in a yield of corresponding products of explosive nucleosynthesis is consistent with results of observations. For iron-group nuclei, such a magnetic enhancement of {sup 44}Ti yield also implies a significant increase in the fraction of the main titanium isotope {sup 48}Ti in the chemical composition of galaxies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photoactivation of the processes of formation of nanostructures by local anodic oxidation of a titanium film

Experimental results on the conditions of activation of probe nanolithography of a thin titanium film by means of local anodic oxidation are reported. It is established that ultraviolet stimulation reduces the geometric dimensions of nanometric oxide structures. The stimulation is accompanied by an increase in the amplitude and duration of the threshold voltage pulse, correspondingly, from 6 to 7 V and from 50 to 100 ms at the relative humidity 50%. The experimental data on the effect of the cantilever coating material and substrate temperature on the geometric dimensions of nanometric oxide structures are reported.

36 MATERIALS SCIENCE↗

Conduction in titanium dioxide films and metal–TiO{sub 2}–Si structures

The effect of the annealing of titanium oxide films on the electrical properties of metal–TiO{sub 2}–n-Si structures is investigated. It is shown that, regardless of the annealing temperature, the conductivity of the structures at positive gate potentials is determined by the space-charge-limited current in the insulator with traps exponentially distributed in terms of energy. At negative gate potentials, the main contribution to the current is provided by the generation of electron–hole pairs in the space-charge region in silicon. The properties of the TiO{sub 2}/n-Si interface depend on the structure and phase state of the oxide film, which are determined by the annealing temperature.

36 MATERIALS SCIENCE↗

Dynamic Strength of a Titanium Alloy with an Electron-Beam-Modified Surface

Data are presented of plane-wave experiments aimed at determining the dynamic strength of 3M titanium alloy with a surface processed by a microsecond electron beam. It has been found that the dynamic strength of processed specimens is higher than that of unprocessed specimens. Metallographic examination of test specimens has revealed spallation macrofracture inside the unprocessed specimens and spallation microfracture at the interface between the hardened layer and the substrate in the beam-processed specimens.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Cobalt and Molybdenum Additives on the Structure and Shape Memory Parameters of Reaction-Sintered Porous Nickel Titanium Alloys

We have studied the structure and properties of porous nickel titanium (TiNi) alloys obtained upon reaction sintering of Ti and Ni powders with Co and Mo additives. It is established that Co and Mo doping additives retain the compaction of Ni powder achieved at the initial stage of sintering. The maximum deformation of porous samples loaded in the austenite state was observed upon adding Co, while the addition of Mo resulted in minimum deformation. The addition of Co leads to single-stage martensitic transformation in TiNi phase, while the addition of Mo leads to the two-stage transformation that is more homogeneous over the volume. Both Co and Mo additives lead to increase in the maximum accumulated strain due to the formation of favorably oriented stress-induced martensite and reoriented quench-induced martensite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the Temperature of Straining in a Bridgman Chamber on Peculiarities of the Defect Structure Formation in Commercial-Grade Titanium

Transmission electron microscopy data showed evidence of the formation of structural regions corresponding to deformation (dislocated) fragments and dynamically recrystallized grains in α-phase titanium upon torsion at high hydrostatic pressure at room and cryogenic temperatures. It is shown that the previously proposed “two-phase mixture” model is applicable to description of these defect structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Formation of Oxide Layers on a Titanium Surface by Irradiation with Femtosecond Laser Pulses

By subjecting technical grade titanium to irradiation with femtosecond laser pulses with high energy density, we create a microporous nanocrystalline oxide layer with a thickness of ∼50 μm on its surface. The structure and phase composition of the modified surface layers are studied using X-ray diffraction and high-resolution scanning and transmission electron microscopies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoporous aluminum oxide membranes coated with atomic layer deposition-grown titanium dioxide for biomedical applications: An in vitro evaluation

The surface topographies of nanoporous anodic aluminum oxide (AAO) and titanium dioxide (TiO 2 ) membranes have been shown to modulate cell response in orthopedic and skin wound repair applications. In this study, we: (1) demonstrate an improved atomic layer deposition (ALD) method for coating the porous structures of 20, 100, and 200 nm pore diameter AAO with nanometer-thick layers of TiO 2 and (2) evaluate the effects of uncoated AAO and TiO 2 -coated AAO on cellular responses. The TiO 2 coatings were deposited on the AAO membranes without compromising the openings of the nanoscale pores. The 20 nm TiO 2 -coated membranes showed the highest amount of initial protein adsorption via the micro bicinchoninic acid (micro-BOA) assay; all of the TiO 2 -coated membranes showed slightly higher protein adsorption than the uncoated control materials. Cell viability, proliferation, and inflammatory responses on the TiO 2 -coated AAO membranes showed no adverse outcomes. For all of the tested surfaces, normal increases in proliferation (DNA content) of L929 fibroblasts were observed over from 4 hours to 72 hours. No increases in TNF-alpha production were seen in RAW 264.7 macrophages grown on TiO 2 -coated AAO membranes compared to uncoated AAO membranes and tissue culture polystyrene (TOPS) surfaces. Both uncoated AAO membranes and TiO 2 -coated AAO membranes showed no significant effects on cell growth and inflammatory responses. In conclusion, the results suggest that TiO 2 -coated AAO may serve as a reasonable prototype material for the development of nanostructured wound repair devices and orthopedic implants.

36 MATERIALS SCIENCE↗

INVESTIGATION OF TITANIUM BONDED GRAPHITE FOAM COMPOSITES FOR MICRO ELECTRONIC MECHANICAL SYSTEMS (MEMS) APPLICATIONS

PiMEMS Inc. (Santa Barbara, CA) in collaboration with ORNL investigated the use of Titanium Bonded Graphite Foam Composites (TBGC) for thermal mitigation in Micro Electronic Mechanical Systems (MEMS) applications. Also considered were potentially new additive manufacturing routes to producing novel high surface area micro features and diverse shaped heat transfer components for numerous lightweight MEMs applications.

36 MATERIALS SCIENCE↗

Study of Thermocurrents in ILC cavities via measurements of the Seebeck Effect in niobium, titanium, and stainless steel thermocouples

The goals of Fermilab’s Superconductivity and Radio Frequency Development Department are to engineer, fabricate, and improve superconducting radio frequency (SCRF) cavities in the interest of advancing accelerator technology. Improvement includes exploring possible limitations on cavity performance and mitigating such impediments. This report focuses on investigating and measuring the Seebeck Effect observed in cavity constituents titanium, niobium, and stainless steel arranged in thermocouples. These junctions exist between cavities, helium jackets, and bellows, and their connection can produce a loop of electrical current and magnetic flux spontaneously during cooling. The experimental procedure and results are described and analyzed. Implications relating the results to cavity performance are discussed.

43 PARTICLE ACCELERATORS↗

Electroplating Titanium from Ionic Mixtures

Titanium & Zirconium metal films have been electroplated by a near-ambient scalable process for high value-add/lower volume applications. The films have been commercially tested as bonding layers

36 MATERIALS SCIENCE↗

Defining the Shape Density of Cerium Oxide and Titanium Dioxide Aerosol

The “shape density” of CeO 2 (cerium oxide) powder (American Elements, Los Angeles CA) is estimated to be 0.82 ± 0.02 g cm -3 and the shape density for TiO 2 (titanium dioxide) powder (American Elements, Los Angeles CA) is estimated as 0.54 ± 0.01 g cm -3 . The “shape density” is defined as the measured loose density (ASTM 2018 and ASTM 2021) of a powder divided by the ICRP (International Commission on Radiological Protection) default aerosol shape factor (Valetin 2002). This information is used for experimental measurements of the RRF (respirable release factor) and other respirable source term parameter (US DOE 1994) experiments at the Los Alamos National Laboratory (LANL). The shape density is the input parameter to the TSI Inc (Shoreview MN) AIM (Aerosol Instrument Manager) software for the TSI model 3321 APS (Aerodynamic Particle Sizer) (Figure 1).

61 RADIATION PROTECTION AND DOSIMETRY↗

Robotic Enrichment Processing of Roche 454 Titanium Emlusion PCR at the DOE Joint Genome Institute

Enrichment of emulsion PCR product is the most laborious and pipette-intensive step in the 454 Titanium process, posing the biggest obstacle for production-oriented scale up. The Joint Genome Institute has developed a pair of custom-made robots based on the Microlab Star liquid handling deck manufactured by Hamilton to mediate the complexity and ergonomic demands of the 454 enrichment process. The robot includes a custom built centrifuge, magnetic deck positions, as well as heating and cooling elements. At present processing eight emulsion cup samples in a single 2.5 hour run, these robots are capable of processing up to 24 emulsion cup samples. Sample emulsions are broken using the standard 454 breaking process and transferred from a pair of 50ml conical tubes to a single 2ml tube and loaded on the robot. The robot performs the enrichment protocol and produces beads in 2ml tubes ready for counting. The robot follows the Roche 454 enrichment protocol with slight exceptions to the manner in which it resuspends beads via pipette mixing rather than vortexing and a set number of null bead removal washes. The robotic process is broken down in similar discrete steps: First Melt and Neutralization, Enrichment Primer Annealing, Enrichment Bead Incubation, Null Bead Removal, Second Melt and Neutralization and Sequencing Primer Annealing. Data indicating our improvements in enrichment efficiency and total number of bases per run will also be shown.

59 BASIC BIOLOGICAL SCIENCES↗

Electromechanical Hardening of VT22 Titanium Alloy in Screw-Cutting Lathes

The influence of electromechanical treatment on the hardening of VT22 titanium alloy is determined. The microstructure of the hardened surfaces is investigated, and the hardness is measured at different depths. Recommendations are made regarding the selection of electromechanical treatment methods.

36 MATERIALS SCIENCE↗

Cutting Methods for Thick Titanium-Alloy Slabs

Methods of cutting thick titanium-alloy plates and slabs are considered. The surface quality of the cut and the productivity are estimated. Abrasive cutting by means of water jets is the most universal method and yields satisfactory surface quality at moderate cost.

42 ENGINEERING↗