SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Oxidation tests on TD Ni-20Cr in static, flowing, and dissociated oxygen at 1100 C and 1 torr, for space shuttle TPS material
Technical problems of design and flight qualification of the proposed classes of surface insulation materials and leading edge materials were reviewed. A screening test plan, a preliminary design data test plan and a design data test plan were outlined. This program defined the apparent critical differences between the surface insulators and the leading edge materials, structuring specialized screening test plans for each of these two classes of materials. Unique testing techniques were shown to be important in evaluating the structural interaction aspects of the surface insulators and a separate task was defined to validate the test plan. In addition, a compilation was made of available information on proposed material (including metallic TPS), previous shuttle programs, pertinent test procedures, and other national programs of merit. This material was collected and summarized in an informally structured workbook.
Space shuttle trajectory-shaping optimization considering the vehicle's thermal environment and the resulting requirements of the thermal protection system (TPS) are discussed. Optimization studies have been conducted yielding results which are generally applicable to shuttle orbiters and are independent of evolution and redirection of the space shuttle program. Two investigations of optimal trajectory shaping, with different methods of considering the thermal environment are presented.
Holography is a lensless imaging technique which can be applied to measure static or dynamic displacements of structures. Conventional holography cannot be readily applied to measure vibration modes of high-temperature structures, due to difficulties caused by thermal convection currents. The present report discusses the use of pulsed differential holography, which is a technique for recording structural motions in the presence of random fluctuations such as turbulence. An analysis of the differential method is presented, and demonstration experiments were conducted using heated stainless steel plates. Vibration modes were successfully recorded for the heated plates at temperatures of 1000, 1600, and 2000 F. The technique appears promising for such future measurments as vibrations of the space shuttle TPS panels or recording flutter of aeroelastic models in a wind-tunnel.
The metallic thermal protection system technology program for the space shuttle is reviewed for the areas of environmental uncertainties, materials data base, TPS design concepts and heat-shield panel configurations, testing and evaluation of materials, panels, and complete systems.
The development of three low-density rigidized insulation materials for the shuttle TPS application is reported. These materials consist of one high purity silica system and two systems based on mullite, an aluminum silicate. Both systems consist of fibers joined together with appropriate binders to obtain a rigidized insulation composite. Both material systems require the application of a glassy coating to provide a wear resistant, high emittance surface and to prevent the absorption of water by the fiber matrix. The technology program has addressed the development of water impervious coatings, methods of assembling the materials in design concepts while minimizing the thermal stress in the insulation, achieving compatibility between the RSI material and the structural system, and test evaluations to demonstrate the feasibility of the surface insulation concept.
The goal of the ablation technology program is to bring ablation research and development to a high state of readiness for application to space shuttle vehicles. Some recent results and current work in the areas of materials, designs, and refurbishment for ablative TPS are reported. Future research and development needs are also presented.
A study was conducted to determine methodology for combining thermal structural loads and assessing the effects of the combined loads on the design of a thermal protection system and a hot structure of a high cross range delta wing space shuttle orbiter vehicle. The study presents guidelines for establishing a basis for predicting thermal and pressure environments and for determining limit and ultimate design loads on the vehicle during reentry. Limit trajectories were determined by using dispersions on a representative nominal mission and system parameters expected during the life of the vehicle. Nine chosen locations on the vehicle surface having TPS or hot structures were examined, and weight sensitivity analyses were performed for each location.
Results are presented of a two year program to evaluate packaged thermal insulations for use under a metallic radiative TPS of a shuttle orbiter vehicle. Evaluations demonstrated their survival for up to 100 mission reuse cycles under shuttle acoustic and thermal loads with peak temperatures of 1000 F, 1800 F, 2000 F, 2200 F and 2500 F. The specimens were composed of low density refractory fiber felts, packaged in thin gage metal foils. In addition, studies were conducted on the venting requirements of the packages, salt spray resistance of the metal foils, and the thermal conductivity of many of the insulations as a function of temperature and ambient air pressure. Data is also presented on the radiant energy transport through insulations, and back-scattering coefficients were experimentally determined as a function of source temperature.
The uncertainty in heating predictions derived from ground test data correlations has been used to define the corresponding uncertainties in TPS weight for the Space Shuttle. A completely reusable Shuttle system consisting of an aluminum heat sink booster and orbiter with reusable surface insulation for thermal protection was evaluated. The largest contribution to the uncertainty in the weight of the thermal protection system for the orbiter occurred on lower surface areas due to heating and boundary layer transition uncertainties. Extension of this work to the current Shuttle system concept showed reduced weight uncertainty for the external tank compared to the reusable booster.
Materials and design technology of the all-silica LI-900 rigid surface insulation (RSI) thermal protection system (TPS) concept for the shuttle spacecraft is presented. All results of contract development efforts are documented. Engineering design and analysis of RSI strain arrestor plate material selections, sizing, and weight studies are reported. A shuttle prototype test panel was designed, analyzed, fabricated, and delivered. Thermophysical and mechanical properties of LI-900 were experimentally established and reported. Environmental tests, including simulations of shuttle loads represented by thermal response, turbulent duct, convective cycling, and chemical tolerance tests are described and results reported. Descriptions of material test samples and panels fabricated for testing are included. Descriptions of analytical sizing and design procedures are presented in a manner formulated to allow competent engineering organizations to perform rational design studies. Results of parametric studies involving material and system variables are reported. Material performance and design data are also delineated.
Wind tunnel tests were conducted to determine the aerodynamic heating created by gaps in the reusable surface insulation (RSI) thermal protection system (TPS) for the space shuttle. The effects of various parameters of the RSI on convective heating characteristics are described. The wind tunnel tests provided a data base for accurate assessment of gap heating. Analysis and correlation of the data provide methods for predicting heating in the RSI gaps on the space shuttle.
This study establishes that configurations satisfying the aeromaneuvering orbit-to-orbit shuttle (AMOOS) requirements can be designed with performance capabilities in excess of the purely propulsive space tug. In view of this improved potential of the AMOOS vehicle over the propulsive space tug concept it is recommended that the AMOOS studies be advanced to a stage comparable to those performed for the space tug. This advancement is needed in particular in areas that are either peculiar to AMOOS or not addressed in sufficient detail in these studies to date. These areas include the thermodynamics problems, navigation and guidance, operations and economics analyses, subsystems and interfaces. The aeromaneuvering orbit-to-orbit shuttle (AMOOS) is evaluated as a candidate reusable third stage to the two-stage earth-to-orbit shuttle (EOS). AMOOS has the potential for increased payload capability over the purely propulsive space tug by trading a savings in consumables for an increase in structural and thermal protection system (TPS) mass.
The in-situ vacuum chamber designed around the IRE was tested under vacuum. The contamination analyzer system was tested using two liquid contaminant materials. The analysis of the contaminants on the SL-4 rendezvous window shows that the material has methyl silicone, hydroxyl, and carbonyl radicals. The analysis of the outgassing material from Shuttle TPS shows silicone as the primary product.
The integrity and reusability of three flight-weight metallic and RSI thermal protection systems, designed for the Shuttle entry environment, have been demonstrated. Each model successfully survived over 23 entry thermal cycles without serious degradation. The metallic systems were more tolerant of the hostile environment and provided a higher degree of reusability than did the RSI. Thermal expansion slip joints of the metallic TPS successfully prevented hot gas ingress to the substructure. The RSI demonstrated high damage tolerance and field repairs increased its reusability. Heat-transfer tests to further assess RSI gap heating indicate that stacked tile orientations may impose a penalty on tile thickness. Parameters influencing RSI impingement heating were determined, and the heating data were correlated.
A space shuttle high temperature reusable surface insulation (HRSI) tile array with a single missing or lost tile was exposed to a hot gas simulated reentry environment to investigate the heating conditions in and around the vicinity of the missing HRSI tile. Heat flux and pressure data for the lost tile condition were obtained by the use of a water cooled lost tile calibration model. The maximum aluminum substrate temperature obtained during the simulated reentry was 128 C (263 F). The lost tile calibration data indicated a maximum heat flux in the lost tile cavity region of 63 percent of the upstream reference value. This test was conducted at the Ames Research Center in the 20 MW semielliptical thermal protection system (TPS) pilot plasma arc test facility.
An experimental program was conducted to identify the outgassing rate for a shuttle baseline thermal protective surface (TPS) which utilizes room temperature volcanizing (RTV) 560 adhesive. Results are discussed.
Efforts made to determine the vulnerability of Orbiter and ET materials located at various positions within exhaust plumes from test SSRM's using four different propellant formulations are discussed. Data also cover the effect on TPS materials from a single SSRM plume and dual SSRM plumes, and definitions of test SSRM plume environment at material specimen locations.