Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Staging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Laser velocimeter measurements of the flow downstream of the Space Shuttle Main Engine high pressure oxidizer turbopump first-stage turbine nozzle

A laser two-focus velocimeter was used in an open-loop water test facility in order to map the flowfield downstream of the SSME's high-pressure oxidizer turbopump first-stage turbine nozzle; attention was given to the effects of the upstream strut-downstream nozzle configuration on the flow at the rotor inlet, in order to estimate dynamic loads on the first-stage rotor blades. Velocity and flow angles were plotted as a function of circumferential position, and were found to clearly display the periodic behavior of the wake flow field. The influence of the upstream centerbody-supporting struts on the vane nozzle wake pattern was evident.

Ferguson, T. V.↗
NASA NTRS1988

Design point variation of 3-D loss and deviation for axial compressor middle stages

The available data on middle-stage research compressors operating near design point are used to derive simple empirical models for the spanwise variation of three-dimensional viscous loss coefficients for middle-stage axial compressor blading. The models make it possible to quickly estimate the total loss and deviation across the blade span when the three-dimensional distribution is superimposed on the two-dimensional variation calculated for each blade element. It is noted that extrapolated estimates should be used with caution since the correlations have been derived from a limited data base.

Roberts, William B.↗
NASA NTRS1986

Measurement of airfoil heat transfer coefficients on a turbine stage

The Primary basis for heat transfer analysis of turbine airfoils is experimental data obtained in linear cascades. These data were very valuable in identifying the major heat transfer and fluid flow features of a turbine airfoil. The first program objective is to obtain a detailed set of heat transfer coefficients along the midspan of a stator and a rotor in a rotating turbine stage. The data are to be compared to some standard analysis of blade boundary layer heat transfer which is in use today. A second program objective is to obtain a detailed set of heat transfer coefficients along the midspan of a stator located in the wake of an upstream turbine stage.

Dring, Robert P.↗
NASA NTRS1989

Space Shuttle Main Engine structural analysis and data reduction/evaluation. Volume 7: High pressure fuel turbo-pump third stage impeller analysis

This volume summarizes the analysis used to assess the structural life of the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbo-Pump (HPFTP) Third Stage Impeller. This analysis was performed in three phases, all using the DIAL finite element code. The first phase was a static stress analysis to determine the mean (non-varying) stress and static margin of safety for the part. The loads involved were steady state pressure and centrifugal force due to spinning. The second phase of the analysis was a modal survey to determine the vibrational modes and natural frequencies of the impeller. The third phase was a dynamic response analysis to determine the alternating component of the stress due to time varying pressure impulses at the outlet (diffuser) side of the impeller. The results of the three phases of the analysis show that the Third Stage Impeller operates very near the upper limits of its capability at full power level (FPL) loading. The static loading alone creates stresses in some areas of the shroud which exceed the yield point of the material. Additional cyclic loading due to the dynamic force could lead to a significant reduction in the life of this part. The cyclic stresses determined in the dynamic response phase of this study are based on an assumption regarding the magnitude of the forcing function.

Pool, Kirby V.↗
NASA NTRS1989

Multi-blade Navier-Stokes simulations of rotor-stator interaction in a turbine stage

Turbulent flow fields of multiblade rotor/stator configurations in a turbine stage for the high pressure fuel side turbopump of the space shuttle main engine are obtained using a computer program that can simulate flows in a stage with an unequal number of rotor and stator blades. The calculations are performed on a system of multiple patched and overlaid grids using the unsteady, thin-layer Navier-Stokes equations in two-dimension. Aerodynamic performance of two rotor/stator configurations are studied and compared in the form of pressure contours, Mach number contours, time averaged surface pressure, and unsteady pressure amplitude. Spatial and temporal accuracy of flow calculations along with computation cost are evaluated for the purpose of engineering design applications.

Lin, S. J.↗
NASA NTRS1988

Fatigue crack growth behavior of a single crystal alloy as observed through an in situ fatigue loading stage

An in situ fatigue loading stage inside a scanning electron microscope (SEM) was used to determine the fatigue crack growth behavior of a PWA 1480 single-crystal nickel-based superalloy. The loading stage permits real-time viewing of the fatigue damage processes at high magnification. The PWA 1480 single-crystal, single-edge notch specimens were tested with the load axis parallel to the (100) orientation. Two distinct fatigue failure mechanisms were identified. The crack growth rate differed substantially when the failure occurred on a single slip system in comparison to multislip system failure. Two processes by which crack branching is produced were identified and are discussed. Also discussed are the observed crack closure mechanisms.

Telesman, Jack↗
NASA NTRS1989

Time evolution from linear to nonlinear stages in magnetohydrodynamic parametric instabilities

The nonlinear evolution of the magnetohydrodynamic (MHD) parametric instability of wave fluctuations propagating along an unperturbed magnetic field is investigated. Both a magnetohydrodynamic perturbation-theoretical approach and a nonlinear MHD simulation are used. It is shown that high harmonic waves are rapidly excited by wave-wave coupling, and that the wave spectrum evolves from a state containing a small number of degrees of freedom in k space to one which contains a large number of degrees of freedom. It is found that the spectral evolution prior to nonlinear saturation is well described by the prturbation theory. During this stage, the ratio of the growth rate of the nth harmonic wave to the linear growth rate of the fundamental wave is n. The nonlinear saturation stage is characterized by a frequency shift of the fundamental wave that destroys the wave-wave resonance condition which, in turn, causes the wave amplitude to cease its growth.

Hoshino, M.↗
NASA NTRS1989

Application of a Two-dimensional Unsteady Viscous Analysis Code to a Supersonic Throughflow Fan Stage

The Rai ROTOR1 code for two-dimensional, unsteady viscous flow analysis was applied to a supersonic throughflow fan stage design. The axial Mach number for this fan design increases from 2.0 at the inlet to 2.9 at the outlet. The Rai code uses overlapped O- and H-grids that are appropriately packed. The Rai code was run on a Cray XMP computer; then data postprocessing and graphics were performed to obtain detailed insight into the stage flow. The large rotor wakes uniformly traversed the rotor-stator interface and dispersed as they passed through the stator passage. Only weak blade shock losses were computerd, which supports the design goals. High viscous effects caused large blade wakes and a low fan efficiency. Rai code flow predictions were essentially steady for the rotor, and they compared well with Chima rotor viscous code predictions based on a C-grid of similar density.

Steinke, Ronald J.↗
NASA NTRS1989

Hypervelocity impacts and upper-stage breakups

Preliminary analysis results have been obtained for tests conducted to ascertain whether a distinctive fragmentation 'signature' allows discrimination between launch vehicle upper stage destructions due to hypervelocity particle impacts and internal explosions. An account is presently given of factors controlling the damage pattern created by hypervelocity impacts, and an evaluation is made of the applicability of the simulation results obtained to actual upper stage destruction characterization.

Cour-Palais, B. G.↗
NASA NTRS1989

Current operational practice for the Delta second stage

At the end of operation for the Delta launch vehicle's second-stage propellant tankage, 250 lb of propellants remain. Analyses of on-orbit breakups that may have been caused by fuel tank overpressurization have led to the adoption of a restart operational policy in which the engine is fired for as long as necessary to ensure that as much oxidizer as possible is vented from the tank; tank pressures are thereby reduced to about 75 psi. None of the 12 experimentally restarted stages have broken up since 1981.

Gray, Almon A., Jr.↗
NASA NTRS1990

Solid-liquid staged combustion space boosters

NASA has begun to evaluate solid-liquid hybrid propulsion for launch vehicle booster. A three-phase program was outlined to identify, acquire, and demonstrate technology needed to approximate solid and liquid propulsion state of the art. Aerojet has completed a Phase 1 study and recommends a solid-liquid staged combustion concept in which turbopump fed LO2 is burned with fuel-rich solid propellant effluent in aft-mounted thrust chambers.These reasonably sized thrust chambers are LO2 regeneratively cooled, supplemented with fuel-rich barrier cooling. Turbopumps are driven by the resulting GO2 coolant in an expander-bleed-burnoff cycle. Turbine exhaust pressurizes the LO2 tankage directly, and the excess is bled into supersonic nozzle splitlines, where it combusts with the fuel rich boundary layer. Thrust vector control is enhanced by supersonic nozzle movement on flexseal mounts. Every hybrid solid-liquid concept examined improves booster energy management and launch propellant safety compared to current solid boosters. Solid-liquid staged combustion improves hybrid performance by improving both combustion efficiency and combustion stability, especially important for large boosters. These improvements result from careful fluid management and use of smaller combustors. The study shows NASA safety, reliability, cost, and performance criteria are best met with this concept, wherein simple hardware relies on several separate emerging technologies, all of which have been demonstrated successfully.

Culver, D. W.↗
NASA NTRS1991

Current systems: Upper stages

The United States orbital transfer vehicles are presented: PAM-D (Payload Assist Module); PAM-D2; IUS (Inertial Upper Stage); and TOS (Transfer Orbit Stage). This presentation is represented by viewgraphs.

Gunn, Charles R.↗
NASA NTRS1992

Improved Fluidized-Bed Reactor With Horizontal Staging

Design of fluidized-bed reactor containing multiple, horizontally arrayed stages offers advantages over present multistage fluidized bed reactors with horizontal, vertical, or slanted stacking. In new reactor, solids proceed from one stage to next by flow over weir. Design promotes conservation of energy and optimization of flows and residence times.

Sullivan, Thomas A.↗
NASA NTRS1992

Mission and sizing analysis for the Beta 2 two-stage-to-orbit vehicle

NASA Lewis Research Center studied a horizontal takeoff and landing, fully reusable, two-stage-to-orbit (TSTO) vehicle capable of launching and returning a 10,000 pound payload to low Earth polar orbit using low-risk technology. The vehicle, called Beta 2, was derived from the USAF/Boeing Beta vehicle, a TSTO study vehicle capable of launching a 50,000 pound payload to low Earth polar orbit. Development of the Beta 2 from the USAF/Boeing Beta vehicle occurred in a series of iterations during which the size of the vehicle was decreased to accommodate the smaller payload, the staging Mach number was decreased from 8.0 to 6.5, and the rocket propulsion system was removed from the booster. The final Beta 2 vehicle consisted of a rocket powered orbiter and an all airbreathing booster. The gross takeoff weight of the Beta 2 vehicle was approximately 1.1 million pounds. In addition to its baseline mission, the Beta 2 was capable of delivering approximately 17,500 pounds to the Space Station with the same takeoff gross weight. The mission and sizing analysis performed to arrived at the Beta 2 vehicle is discussed.

Nadell, Shari-Beth↗
NASA NTRS1992

Design, development, and fabrication of extravehicular activity tools for the transfer orbit stage

Seven extravehicular activity (EVA) tools and a tool carrier have been designed and developed by MSFC in order to provide a two fault tolerant system for the transfer orbit stage (TOS) shuttle mission. The TOS is an upper stage booster for delivering payloads to orbits higher than the shuttle can achieve. Payloads are required not to endanger the shuttle even after two failures have occurred. The Airborne Support Equipment (ASE), used in restraining and deploying TOS, does not meet this criteria. The seven EVA tools designed will provide the required redundancy with no impact to the TOS hardware.

Albritton, L. M.↗
NASA NTRS1992

Mission and sizing analysis for the Beta II two-stage-to-orbit vehicle

NASA Lewis Research Center studied a horizontal takeoff and landing, fully reusable, two-stage-to-orbit (TSTO) vehicle capable of launching and returning a 10,000 pound payload to low earth orbit using low-risk technology. The vehicle, called Beta 2, was derived from the USAF/Boeing Beta vehicle, a TSTO study vehicle capable of launching a 50,000 pound payload to low earth orbit. Development of the Beta 2 from the USAF/Boeing Beta vehicle occurred in a series of iterations during which the size of the vehicle was decreased to accommodate the smaller payload, the staging Mach number was decreased from 8.0 to 6.5, and the rocket propulsion system was removed from the booster. The final Beta 2 vehicle consisted of a rocket powered orbiter and an all airbreathing booster. The gross takeoff weight of the Beta 2 vehicle was approximately 1.1 million pounds. In addition to its baseline mission, the Beta 2 was capable of delivering approximately 17,500 pounds to the Space Station with the same takeoff gross weight. The mission and sizing analysis performed to arrive at the Beta 2 vehicle is discussed.

Nadell, Shari-Beth↗
NASA NTRS1992

Activities of the NASA/Marshall Space Flight Center pump stage technology team

In order to advance rocket propulsion technology, the Consortium for Computational Fluid Dynamics (CFD) Application in Propulsion Technology has been formed at Marshall Space Flight Center (MSFC). The Consortium consists of three Teams: the turbine stage team, the pump stage team (PST), and the combustion devices team. The PST has formulated and is implementing a plan for pump technology development whose end product will be validated CFD codes suitable for application to pump components, test data suitable for validating CFD codes, and advanced pump components optimized using CFD codes. The PST's work during the fall of 1991 and the winter and spring of 1992 is discussed in this paper. This work is highlighted by CFD analyses of an advanced impeller design and collection of laser two-focus velocimeter data for the Space Shuttle Main Engine High Pressure Fuel Pump impeller.

Garcia, R.↗
NASA NTRS1992

Acoustic and thermal testing of the Titan/Centaur upper stage

A new version of the Centaur high-energy upper stage is being produced by General Dynamics for the USAF/Martin Marietta Titan launch vehicle. The Titan/Centaur upper stage is subject to consecutive acoustic and thermal testing in General Dynamics' Acoustic and Thermal Test Facility (ATTF). All data is acquired and processed digitally using the high-speed data acquisition system located in the ATTF. Processed data from over 250 sensors measuring acceleration, temperature, and sound pressure level is made available to the test team in minutes for use in making real-time test decisions. These tests represent the first consecutive large-scale environmental tests conducted on a complete, pressure stabilized, cryogenically tanked space launch vehicle. Some of the unique challenges involved in testing the Titan/Centaur and how these challenges were met using the ATTF are described.

Gehringer, Mark↗