SEARCH · Engineering Papers

Results for “Spring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

NASA NTRS1983

The influence of gyroscopic forces on the dynamic behavior and flutter of rotating blades

The structural dynamics of a cantilever turbomachine blade mounted on a spinning and precessing rotor are investigated. Both stability and forced vibration are considered with a blade model that increases in complexity (and verisimilitude) from a spring-restrained point mass, to a uniform cantilever, to a twisted uniform cantilever turbomachine blade mounted on a spinning and precessing rotor are investigated. Both stability and forced vibration are considered with a blade model that increases in complexity (and verisimilitude) from a spring-restrained point mass, to a uniform cantilever, to a twisted uniform cantilever, to a tapered twisted cantilever of arbitrary cross-section. In every instance the formulation is from first principles using a finite element based on beam theory. Both ramp-type and periodic-type precessional angular displacements are considered. In concluding, forced vibrating and flutter are studied using the final and most sophisticated structural model. The analysis of stability is presented and a number of numerical examples are worked out.

Sisto, F.↗

NASA NTRS1982

Flexible radiator system: Executive summary

A full scale prototype flexible radiator panel was designed, built and tested. The panel, has approximately 173 sq ft of radiating area and is designed to reject 1.33 kW of heat to a 0 F sink with a 100 F fluid inlet. The panel is constructed from a flexible Teflon/silver mesh fin surrounding 1/8 inch Teflon tubes. The prototype panel is stowed on a 10 inch diameter by 4 foot wide drum. (It rolls up to a diameter of 17 inches when fully stowed). Deployment of the soft tube prototype is via two four inch diameter Kevlar/Mylar inflation tubes with flat springs incorporated in each tube. Nitrogen is normally used for the deployment with approximately 1 psi required. The springs retract the panels when the inflation tubes are deflated. Another method of deployment available for the soft tube flexible is a motor driven deployable boom. This eliminates the need for expendables when the panel area is varied during the mission for heat load control. The soft tube panel is designed for a 90% probability of no punctured tube in a 30 day mission. The acceptable working fluids for this soft tube flexible are Coolanol 15, Coolanol 20 and Glycol/water (a eutectic mixture).

Oren, J. R.↗

NASA NTRS1984

Variations in surface current off the coasts of Canada as inferred from infrared satellite imagery

Infrared satellite images of sea surface temperature are used to infer changes in the surface currents off both the east and west coasts of Canada. Off the east coast, summer infrared temperature patterns suggest a close connection between the location of the continental slope and the path of the Labrador Current as marked by a strong change in the shape of the continental slope. In winter both infrared and visible imagery reveal the southward propagation of wavelike features in the ice patterns along the Labrador coast. A large number of images from the Canadian west coast were used to depict the evolution of surface temperature features. In winter and spring 150 km current meanders are fed energy by the baroclinic instability of the uniformly directed current which flows northwest in winter and southeast in spring. In summer the surface current is directed southeastward while below it an undercurrent flows to the northeast. Initiated by an interaction with the irregularities of the local continental slope 75 km current meanders begin to form. Energy is then fed non-linearly by baroclinic instability into longer scale 150 km meander which eventually shed to form separate eddies.

Emery, W. J.↗

NASA NTRS1984

Methods for analysis of cracks in three-dimensional solids

Various analytical and numerical methods used to evaluate the stress intensity factors for cracks in three-dimensional (3-D) solids are reviewed. Classical exact solutions and many of the approximate methods used in 3-D analyses of cracks are reviewed. The exact solutions for embedded elliptic cracks in infinite solids are discussed. The approximate methods reviewed are the finite element methods, the boundary integral equation (BIE) method, the mixed methods (superposition of analytical and finite element method, stress difference method, discretization-error method, alternating method, finite element-alternating method), and the line-spring model. The finite element method with singularity elements is the most widely used method. The BIE method only needs modeling of the surfaces of the solid and so is gaining popularity. The line-spring model appears to be the quickest way to obtain good estimates of the stress intensity factors. The finite element-alternating method appears to yield the most accurate solution at the minimum cost.

Raju, I. S.↗

NASA NTRS1982

Approximating a finite element model of a hybrid deployable truss by a discrete mass model

The NASTRAN finite element model of the MSFC/hybrid deployable truss is approximated by a model consisting of four bodies serially connected by a spring hinge suspension. The truss is decomposed into four serially connected modules determining the total mass and rotational inertias for a rigid body with its mass center on the axis of the truss for each module. A five-body cantilever truss model is developed along with an undamped form of this model. Spring coefficient values are generated to match eigenvalues of the latter model with those of the NASTRAN model. Damping coefficients are then determined that provide n percent of critical damping for the model.

Chichester, F. D.↗

NASA NTRS1985

Screw-Retaining Allen Wrench

Steadying screws with fingers unnecessary. Crimp in uncompressed spring wire slightly protrudes from one facet of Allen wrench. Compressed spring retains Allen screw. Tool used with Allen-head screws in cramped spaces with little or no room for fingers to hold fastener while turned by wrench.

Granett, D.↗

NASA NTRS1984

Self-charging metering and dispensing device for fluids

A self-metering and dispensing device for fluids obtained from a pressurized fluid supply is discussed. Tubing and valving means permit the introduction of fluid into and discharge from a closed cylindrical reservoir. The reservoir contains a slideably disposed piston co-acting with a coil compression spring, with piston travel determining the amount of fluid in the reservoir. Once the determined amount of fluid is introduced into the reservoir, the fluid is discharged by the force of the coil compression spring acting upon the piston.

Hooper, S. L.↗

NASA NTRS1985

Measurements of the surface energy budget in the southern Gobi Desert of China, and in the Rocky Mountains of Colorado

Observations of the land surface energy balance were made in the Gobi desert and at two mountain sites in northern Colorado. The Gobi study included 12 days of observations in spring (April 8 to 20, 1984) and 31 days in summer at the same site (June 17 to July 18, 1984). The Colorado study included 126 days (March 13 to July 17, 1984) at a valley site and 34 days (July 31 to September 3, 1984) at a mountain top location. The data for each study included continuous observations of upward and downward radiative fluxes in three wave bands, soil temperature and moisture at four levels, air temperature and humidity at four levels and UVW wind components at three levels. Analyses of the Gobi data include definition of the impact of variable atmospheric moisture on the surface energy balance between spring and summer. In addition, diurnal wind circulations forced by heating of the northern edge of the Tibetan Plateau were observed during both periods.

Reiter, E. R.↗

NASA NTRS1985

Seasonal and Secular Variation of the Solis Lacus Albedo Feature: Relation to the Martian Dust-transport Cycle

As documented over the course of thirty-six Martian years, dramatic seasonal and secular variations occur in albedo features in the Solis Planum region of Mars. The most striking of these is the classical dark albedo features, Solis Lacus. Solis Lacus is generally most distinct during southern spring and summer. Mariner 9 and Viking Orbiter images reveal that Solis Lacus contains and is surrounded by a conspicuous pattern of bright and dark wind streaks. A seasonal dust-transport cycle is proposed to explain these observations. During later southern spring or early summer, dust is eroded from the surface and transported from the region by local dust storms which may become a global dust storm. Removal of dust over a wide area results in the dark Solis Lacus feature. During the cessation stage of global dust-storm activity (typically mid- to late-southern summer), enhanced deposition in the lee of obstacles forms the prominent patterns of bright streaks observed within and around Solis Lacus. As the year progresses (southern fall and winter), sedimentation from the atmospheric dust load occurs over the entire region, decreasing the contrast of the albedo features to their surroundings. Dust-storm activity the following year renews the cycle by again removing dust from the region.

Lee, S. W.↗

NASA NTRS1985

Paleohydrologic Implications of Valley Networks of Mars

Valley networks in the heavily cratered terrains of Mars represent an ancient epoch of hydrologic conditions greatly different from those of today. Available crater counts on the valley networks indicate formation during the high flux of impacting bodies charaterizing the early heavy bombardment phase of Martian history. Two populations of valleys are recognized in the equatorial regions of Mars: pristine and degraded. The latter probably formed at the very end of the heavy bombardment phase, extending into the post-heavy bombardment by formation in the intercrater plains. Pristine valleys generally form segments of larger networks with degraded components. This suggests that valley formation was a prolonged process coeval with the heavy bombardment period and extending just beyond that period in martian history. The pristine networks and pristine portions of compound networks on Mars show morphological attributes consistent with an origin by headward growth through spring sapping. On Earth spring sapping occurs where groundwater out-streamflow can be generated by insolation changes associated with orbital parameters or with geothermal effects, such as might be associated with impact or with the volcanic emplacement of the intercrater plains. Thus, it is appropriate to specify the most conservation deviation from modern hydrologic conditions on Mars that could account for the ancient epoch of valley formation.

Baker, V. R.↗

NASA NTRS1985

Participation in the Mars Data Analysis Program: Analysis of cloud forms in Viking and Mariner 9 images

The first systematic account of the climate of Mars, based upon observations was produced. Cloud data were used to determine spatially and temporally varying near-surface wind direction, relative wind speed, static stability, and humidity conditions on a global scale. Existing models of meteorological processes were critically reexamined in light of the data, and more stringent constraints were set on global processes. Several discoveries were made, including the large extent and seasonal variability of the Mars equatorial Hadley cell, the failure of high latitude winds to reverse direction in early northern spring, the change in meridional wind component in southern midautum, and the almost constant cloud cover in the northern hemisphere, during spring and summer primarily by condensate clouds and in fall and winter by condensates and dust. The implications of these observations are discussed.

Gierasch, P.↗

NASA NTRS1984

Development of a quantitative basis for selection of spectral features in a vegetation monitoring system

The development of an objective methodology for evaluation of alternative Landsat data preprocessing options, spectral transform features for monitoring vegetation, and feature summarization algorithms is presented. Based on estimates of spectral separability between a target class and its confusion classes, analysis of variance techniques are used to evaluate potential design options for large scale vegetation monitoring systems. Case studies are presented for early season and through the season spring small grains separation and for barley/other spring small grains separation. It is concluded that a basis for efficient, objective selection among alternative feature extraction approaches has been established for the large scale vegetation mapping/inventory problem. Although the approach has been demonstrated for the unitemporal class separability case, extensions to the multitemporal case are under development.

Phinney, D. E.↗

NASA NTRS1985

Estimates of leaf area index from spectral reflectance of wheat under different cultural practices and solar angle

The influence of management practices and solar illumination angle on the leaf area index (LAI) was estimated from measurements of wheat canopy reflectance evaluated by two methods, a regression formula and an indirect technique. The date of planting and the time of irrigation in relation to the stage of plant growth were found to have significant effects on the development of leaves in spring wheat. A reduction in soil moisture adversely affected both the duration and magnitude of the maximum LAI for late planting dates. In general, water stress during vegetative stages resulted in a reduction in maximum LAI, while water stress during the reproductive period shortened the duration of green LAI in spring wheat. Canopy geometry and solar angle also affected the spectral properties of the canopies, and hence the estimated LAI. Increase in solar zenith angles resulted in a general increase in estimated LAI obtained from both methods.

Asrar, G.↗

NASA NTRS1984

A mirror mount for cryogenic environments

The finite element method was used to study the effect of mount-induced aberrations on the optical surface of a lightweight double arch mirror subjected to cryogenic temperatures. The mount design was controlled by the requirements imposed on the optical surface quality and stress levels. The finite element analysis was used to define the feasible range of mount parameters and the selection of a design within the feasible region. The final design consisted of three spring-loaded Invar T-clamps that uniquely define the location of the mirror, three radially compliant parallel spring guides that remove the effect of radial contraction of structure in cryogenic temperatures, and a flexible baseplate that was used to reduce the effect of temperature-induced baseplate tilt errors. The experimental results from the application of this system to an existing 20-inch fused silica double arch mirror are shown, and possible improvements in system performance are discussed.

Iraninejad, B.↗

NASA NTRS1984

Signatures of troposphere-stratosphere momentum coupling Implications for global atmospheric angular momentum and earth rotation budgets

During January-August 1978, the global atmospheric angular momentum (M) exhibits distinct patterns of short term momentum interchange across latitudes. In the Northern Hemisphere winter-spring season, 30-50 day modulations of M are present in which momentum enhancements at mid-latitudes (20-30 deg) are closely matched by momentum depressions at high latitudes (50-60 deg). During the same interval there are no corresponding variations in M evident in the Southern Hemisphere. Conversely, during Southern Hemisphere fall-winter, similar anti-correlations in monthly scale momentum excursions are evident between mid and high latitudes. In the Northern Hemisphere, the winter-spring momentum signatures are detected throughout the atmosphere, from the lower troposphere to the stratosphere. During the Southern Hemisphere fall-winter, the modulation patterns are not evident at the higher altitudes. Structural details of the momentum signatures indicate that the coupling is sometimes effective on very short time scales, e.g., 1-2 days, or less. The evidence of distinct anti-correlation between large regions has interesting implications for studies of global atmospheric circulation, and also for studies of the excitation of variations in earth rotation in response to short term modulations of M.

Taylor, H. A.↗

NASA NTRS1985

The gamma-ray spectrum of the Galactic center region

The Galactic center region was observed with the HEAO 3 High Resolution Gamma-Ray Spectrometer during the fall of 1979 and the spring of 1980. Between these epochs there was observed (1) a statistically significant decrease in the high-energy (511 keV to about 3 MeV) luminosity, (2) a decrease in the positron annihilation line intensity, reported previousy, and (3) a low positronium annihilation fraction f = 0.38 + or 0.19 during the fall of 1979. If positrons are generated by photon-photon collisions of high-energy photons, then the absence of a detected flux above 511 keV in the spring of 1980 may indicate a time delay between positron production and annihilation.

Riegler, G. R.↗

NASA NTRS1985

Spatial and temporal patterns in pigment biomass in Gulf Stream warm-core ring 82B and its environs

A chronology of the horizontal and vertical distribution of phytoplankton pigment biomass provides a biological life history of Gulf Stream warm-core ring 82B. Development of ring 82B is followed through three distinct periods: a winter/early spring period of deep convective overturn with uniform and relatively high pigment concentrations to depths of 400 m, a late spring stratification period with subsurface (20-30 m) pigment maxima and relatively high ring center values compared to surrounding waters, and a Gulf Stream interaction period when ring characteristics are dominated by intrusions of low pigment concentration waters. While the ring maintains a unique identity throughout these periods of its life, prolonged deep vertical mixing as well as episodic interactions with its surrounding have a significant influence on pigment distributions within the ring. These interactions generally enhance pigment biomass compared to the water mass from which it is derived. A consistent feature of pigment distribution is the remarkable coherence between this measure of phytoplankton biomass and the corresponding physical hydrodynamic structure of the upper water column.

Smith, R. C.↗

NASA NTRS1986

Self-Alining Electrical Connector

Mating pair of insulators forces initial alinement of plug and socket. Male pins recessed behind one of alining insulators so they cannot touch female contacts alined. Contacts mate when coupling nut draws alined plug and socket together, depressing one of alining insulators against spring. Compressed spring provides tension on mated threads of assembly helping connector to resist loosening under vibration or shock. Arrangement prevents breakage or bending of male pins on conventional connectors when misalined contacts carelessly pressed together.

Swanic, A.↗