Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spatial data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Spatially-resolved measurements of spin valley polarization in MOCVD-grown monolayer WSe 2

Time-resolved Kerr rotation microscopy is used to generate and measure spin valley polarization in MOCVD-grown monolayer tungsten diselenide (WSe 2 ). The Kerr signal reveals bi-exponential decay with time constants of 100 ps and 3 ns. Measurements are performed on several triangular flakes from the same growth cycle and reveal larger spin valley polarization near the edges of the flakes. This spatial dependence is observed across multiple WSe 2 flakes in the Kerr rotation measurements but not in the spatially resolved reflectivity or microphotoluminescence data. Time-resolved pump-probe overlap measurements further reveal that the Kerr signal’s spatial dependence is not due to spin diffusion on the nanosecond timescale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hiereachical Bayesian Model for Combining Geochemical and Geophysical Data for Environmental Applications Software

Development of a hierarchical Bayesian model to estimate the spatiotemporal distribution of aqueous geochemical parameters associated with in-situ bioremediation using surface spectral induced polarization (SIP) data and borehole geochemical measurements collected during a bioremediation experiment at a uranium-contaminated site near Rifle, Colorado. The SIP data are first inverted for Cole-Cole parameters including chargeability, time constant, resistivity at the DC frequency and dependence factor, at each pixel of two-dimensional grids using a previously developed stochastic method. Correlations between the inverted Cole-Cole parameters and the wellbore-based groundwater chemistry measurements indicative of key metabolic processes within the aquifer (e.g. ferrous iron, sulfate, uranium) were established and used as a basis for petrophysical model development. The developed Bayesian model consists of three levels of statistical sub-models: 1) data model, providing links between geochemical and geophysical attributes, 2) process model, describing the spatial and temporal variability of geochemical properties in the subsurface system, and 3) parameter model, describing prior distributions of various parameters and initial conditions. The unknown parameters are estimated using Markov chain Monte Carlo methods. By combining the temporally distributed geochemical data with the spatially distributed geophysical data, we obtain the spatio-temporal distribution of ferrous iron, sulfate and sulfide, and their associated uncertainity information. The obtained results can be used to assess the efficacy of the bioremediation treatment over space and time and to constrain reactive transport models.

Chen, Jinsong↗

What lies beneath: Vertical temperature heterogeneity in a Mediterranean woodland savanna

As the availability of satellite and airborne thermal infrared remote sensing (TIR-RS) data increases and their spatial, temporal, and spectral resolutions improve, researchers are finding diverse applications for TIR-RS measurements. TIR-RS is now commonly applied in regional- and continental-scale analyses, such as those focused on fire and surface energy balance. However, its application lags in plant physiology and ecology, for which a finer-scale understanding of plant canopy temperatures would be useful to elucidate plant water dynamics, for example. In particular, while methods to disaggregate TIR-RS pixels in horizontal space have advanced, possible vertical stratification of plant canopy temperature and its implications for understanding the correspondence between TIR-RS and finer-scale, field-based thermal measurements (e.g. made with a thermal camera) remain unexplored. Here, we use data from a thermal camera deployed concurrently with the recent ECOSTRESS mission to quantify vertical temperature gradients within tree canopies and temperatures of over- vs. under-story plants in a Mediterranean woodland savanna. We then leverage diverse ancillary data to maximize the geometric comparability of ECOSTRESS and thermal camera measurements, in order to assess the extent to which the two forms of thermal measurements correspond. Specifically, we ask: (1) What are the patterns of intra-canopy and over- vs. under-story vertical temperature in a Mediterranean woodland savanna?, and (2) How can vertically-resolved, but spatially-limited field-based temperature measurements be reconciled with spatially-extensive, but surface-only, temperature measurements of a space-borne remote sensor? Further, we found consistent patterns of vertical thermal heterogeneity both within tree canopies and between ecosystem over- and under-stories. The daytime difference between the top and bottom thirds of blue oak canopies was, on average, 0.48 ° C – and sometimes several times larger. Notably, canopy tops are cooler, likely associated with the under-story grass reaching daytime temperatures often exceeding over-story temperatures by 10° C. Given the consistency of the intra-canopy temperature gradients, we expected the ECOSTRESS sensor would be in better agreement with camera measurements of canopy tops than bulk canopies or canopy bottoms. However, within-canopy gradients were overwhelmed by other sources of disagreement between the measurements, in part associated with upscaling camera measurements across space. Overall, thermal camera and ECOSTRESS measurements were largely in agreement at night (pixel RMSE = 1.1°C), but they were more divergent during times of low (but >0 W/m2) and high incoming solar radiation (daytime pixel RMSE = 3.5°C).

54 ENVIRONMENTAL SCIENCES↗

Understanding the nature of the blazar CGRaBS J0211+1051

The source CGRaBS J0211+1051 (MG1 J021114+1051, z = 0.20) flared up on 2011 January 23 in high-energy γ-rays as reported by the Large Area Telescope (LAT) on board Fermi. This event was followed by increased activity at the UV, optical, and radio frequencies as detected by the observing facilities worldwide. The source also showed a high and variable optical polarization based on which it was proposed to be a low-energy peaked BL Lac object (LBL). The present work reports first comprehensive multi-wavelength study of this source using data in the radio, optical, UV, X- and γ-rays, and optical polarization. Using these multi-wavelength data on the source, we have estimated various parameters and verified its classification vis-a-vis blazar sequence. Multi-waveband light curves are used to discuss the flaring events of 2011 January in an attempt to address the nature of the source and pinpoint the possible physical processes responsible for the emission. The light curves show variations in the high-energy γ-rays to be correlated with X-ray, UV, and optical variations, perhaps indicating their co-spatial origin. Our optical data, quasi-simultaneous with UV (Swift-UVOT) and X-ray (Swift-XRT) data, enabled us to trace the low-energy (synchrotron) component of the spectral energy distribution (SED) for CGRaBS J0211+1051 for the first time. The SED shows the synchrotron peak to lie at ∼1.35 × 10{sup 14} Hz, confirming that CGRaBS J0211+1051 is an LBL. Some other parameters, such as the local magnetic field (∼5.93 G) and black hole mass (∼2.4 × 10{sup 8} M {sub ☉}), are also estimated which are in agreement with their typical values for the blazars. Based on the present study, identification of the Fermi/LAT source, 2FGL J0211.2+1050, with its BL Lac counterpart CGRaBS J0211+1051 is confirmed.

79 ASTRONOMY AND ASTROPHYSICS↗

Clinical accuracy of ExacTrac intracranial frameless stereotactic system

Purpose: In this paper, the authors assess the accuracy of the Brainlab ExacTrac system for frameless intracranial stereotactic treatments in clinical practice. Methods: They recorded couch angle and image fusion results (comprising lateral, longitudinal, and vertical shifts, and rotation corrections about these axes) for 109 stereotactic radiosurgery and 166 stereotactic radiotherapy patient treatments. Frameless stereotactic treatments involve iterative 6D image fusion corrections applied until the results conform to customizable pass criteria, theirs being 0.7 mm and 0.5 deg. for each axis. The planning CT slice thickness was 1.25 mm. It has been reported in the literature that the CT slices' thickness impacts the accuracy of localization to bony anatomy. The principle of invariance with respect to patient orientation was used to determine spatial accuracy. Results: The data for radiosurgery comprised 927 image pairs, of which 532 passed (pass ratio of 57.4%). The data for radiotherapy comprised 15983 image pairs, of which 10 050 passed (pass ratio of 62.9%). For stereotactic radiotherapy, the combined uncertainty of ExacTrac calibration, image fusion, and intrafraction motion was (95% confidence interval) 0.290-0.302 and 0.306-0.319 mm in the longitudinal and lateral axes, respectively. The combined uncertainty of image fusion and intrafraction motion in the anterior-posterior coordinates was 0.174-0.182 mm. For stereotactic radiosurgery, the equivalent ranges are 0.323-0.393, 0.337-0.409, and 0.231-0.281 mm. The overall spatial accuracy was 1.24 mm for stereotactic radiotherapy (SRT) and 1.35 mm for stereotactic radiosurgery (SRS). Conclusions: The ExacTrac intracranial frameless stereotactic system spatial accuracy is adequate for clinical practice, and with the same pass criteria, SRT is more accurate than SRS. They now use frameless stereotaxy exclusively at their center.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhancing Cluster Identification in Atom Probe Tomography Data Using Transfer Learning

Atom Probe Tomography (APT) is a powerful technique for visualizing the atomic-scale distribution of solutes in materials, but quantitative cluster analysis of APT datasets remains a challenge due to the need for subjective parameter selection in clustering algorithms. While distance-based and density-based methods such as HDBSCAN are widely used, their performance is highly sensitive to user-defined parameters, which undermines reproducibility and accuracy. This study proposes an image-based, deep learning-aided workflow for automating parameter selection and cluster detection in APT data analysis. By projecting 3D APT point clouds onto 2D planes, we leverage pretrained convolutional neural networks (ConvNeXt-Tiny and ResNet-50) through transfer learning to predict the number of clusters present in synthetic datasets. The output is used to guide K-means clustering and estimate HDBSCAN parameters, specifically minimum cluster size and minimum sample points. This approach reduces reliance on manual parameter tuning, improving consistency and scalability. The methodology demonstrates the feasibility of using image-based deep learning for interpreting complex spatial patterns in APT data, enabling faster and more objective analysis. The complete workflow and code are made publicly available to support reproducibility and future research.

Density-based clustering↗

Waste Characterization Methods Based on Gamma-ray Imaging Spectrometers - 19454

Characterization of LLW, ILW, U, NORM and TENORM is critical to the nuclear industry's bottom line. Accurate measurements enable the disposal of waste at the lowest possible cost. In the past the most accurate technology available involved using HPGe detectors and extensive system modeling to estimate the total source term given what the user knows about the geometry of the source and any shielding between the source and the detectors. Now there are a variety of imaging detectors that are available commercially, including CZT and HPGe detectors that achieve energy resolution ≤1% FWHM at 662 keV. These devices couple the traditional high resolution spectroscopic analysis with next generation gamma-ray imaging information to more accurately characterize the radiation source term. Uncertainties in the source location will result in significant error in the characterization of an object's radioactivity. It is helpful if the object can be spun, such as a barrel, so that any asymmetry in the source distribution is averaged out from the detector's point of view. Even in the case of a spinning barrel it is important to determine if the radiation is concentrated near the center of the barrel or distributed near the edge. The closer one measures to a barrel, which usually dictates the time required to acquire data, the more these spatial variations in the source distribution will affect the calculated activity of each isotope. This paper will focus on showing the use of CZT imaging spectrometers to characterize complicated radiation source terms. The radiation images are used to determine where the source term should be defined in a radiation transport model that calculates the expected number of photopeak counts for each isotope detected. This is used to calculate the activity of the source. The transport model is used to determine the attenuation of the radiation source term through distance and shielding material, but the detection efficiency is based solely on radiation measurement data. These measurements are taken with a robotic source positioning device that allows for detailed directional efficiency calibration. It is a fully automated system where a detector is loaded into the device and all of the efficiency curves are captured as a function of direction by creating new measurements for each location the robot positions the source. These measurements are tagged with the true source location and the efficiency curve is calculated for each measurement. This is used to create a response function matrix as a function of energy and incident direction which is used to convert the direction dependent flux on the detector head determined from the simulation model to the expected number of counts per unit activity of each isotope of interest. The results of these source term reconstructions in both the spatial and spectral domain will be shown. The impact of improper specification of the source term will be shown for a few standard waste characterization scenarios to demonstrate the importance of proper source location determination. Finally, the underlying calibration method and some sample efficiency curves as a function of direction will be shown to demonstrate the importance of calibrating out directional response functions in imaging devices (which often have a strong forward sensitivity bias). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ultrasonic Model-Based Iterative Reconstruction with Spatially Variant Regularization for One-Sided Non-Destructive Evaluation

One-sided ultrasonic non-destructive evaluation (UNDE) uses ultrasound signals to investigate and inspect structures that are only accessible from one side. A widely used reconstruction technique in UNDE is the synthetic aperture focusing technique (SAFT). SAFT produces fast reconstruction and reasonable images for simple structures. However, for large complex structures, SAFT reconstructions suffer from noise and artifacts. To resolve some of the drawbacks of SAFT, an ultrasonic model-based iterative reconstruction (MBIR) algorithm, a method based on Bayesian estimation, was proposed that showed significant enhancement over SAFT in reducing noise and artifacts. In this paper, we build on previous investigations of the use of MBIR reconstruction on ultrasound data by proposing a spatially varying prior-model to account for artifacts from deeper regions and a 3D regularizer to account for correlations between scans from adjacent regions. We demonstrate that the use of the new prior model in MBIR can significantly improve reconstructions compared to SAFT and the previously proposed MBIR technique.

Almansouri, Hani↗

Gamma-Ray Observations of the Supernova Remnant RX J0852.0-4622 with the Fermi LAT

We report on gamma-ray observations of the supernova remnant (SNR) RX J0852.0-4622 with the Large Area Telescope (LAT) aboard the Fermi Gamma-ray Space Telescope. In the Fermi LAT data, we find a spatially extended source at the location of the SNR. The extension is consistent with the SNR size seen in other wavelengths such as X-rays and TeV gamma rays, leading to the identification of the gamma-ray source with the SNR. The spectrum is well described as a power law with a photon index of {Lambda} = 1.85 {+-} 0.06 (stat){sub -0.19}{sup +0.18} (sys), which smoothly connects to the H.E.S.S. spectrum in the TeV energy band. We discuss the gamma-ray emission mechanism based on multiwavelength data. The broadband data can be fit well by a model in which the gamma rays are of hadronic origin. We also consider a scenario with inverse Compton scattering of electrons as the emission mechanism of the gamma rays. Although the leptonic model predicts a harder spectrum in the Fermi LAT energy range, the model can fit the data considering the statistical and systematic errors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Super-resolution surface slope metrology of x-ray mirrors

We present experimental, analytical, and numerical methods developed for reconstruction (deconvolution) of one-dimensional (1D) surface slope profiles over the spatial frequency range where the raw data are significantly perturbed due to the limited resolution of the measurement instrument. We characterize the spatial resolution properties of a profiler with the instrument's transfer function (ITF). To precisely measure the ITF, we apply a recently developed method utilizing test surfaces with 1D linear chirped height profiles of constant slope amplitude. Based on the results of the ITF calibration, we determine parameters of an analytical model for the ITF that is used in the original reconstruction software. Here, we treat surface slope metrology data obtained with the Optical Surface Measuring System (OSMS), using as a sensor an electronic autocollimator (AC) ELCOMAT-3000. The spatial resolution of the OSMS is limited by the size of the AC light-beam-collimating aperture. For the purposes of this investigation, the OSMS is equipped with a circular aperture with a diameter of 2.5 mm. This is a typical arrangement of most AC-based slope profilers developed for surface slope metrology of state-of-the-art x-ray mirrors. Using the example of surface slope metrology of two state-of-the-art elliptically shaped x-ray focusing mirrors, we demonstrate that the developed data reconstruction procedure allows us to significantly improve the accuracy of surface slope metrology with the OSMS over the spatial wavelength range from ~1.6 mm to 7 mm. Thus, the amplitude of the quasi-periodic error characteristic of the deterministic polishing process used appears to be higher by a factor of~2 than is apparent from the rough metrology data. Underestimation of the surface slope errors in this spatial wavelength range can lead to serious errors in the expected performance of x-ray mirrors in synchrotron beamlines, especially at modern light sources utilizing coherent x rays, where the perturbations can lead to increased speckle-like intensity variation.

47 OTHER INSTRUMENTATION↗

AN STIS ATLAS OF Ca II TRIPLET ABSORPTION LINE KINEMATICS IN GALACTIC NUCLEI

The relations observed between supermassive black holes and their host galaxies suggest a fundamental link in the processes that cause these two objects to evolve. A more comprehensive understanding of these relations could be gained by increasing the number of supermassive black hole mass (M{sub .}) measurements. This can be achieved, in part, by continuing to model the stellar dynamics at the centers of galactic bulges using data of the highest possible spatial resolution. Consequently, we present here an atlas of galaxies in the Space Telescope Imaging Spectrograph (STIS) data archive that may have spectra suitable for new M{sub .} estimates. Archived STIS G750M data for all non-barred galactic bulges are co-aligned and combined, where appropriate, and the radial signal-to-noise ratios calculated. The line-of-sight velocity distributions from the Ca II triplet are then determined using a maximum penalized likelihood method. We find 19 out of 42 galaxies may provide useful new M{sub .} estimates since they are found to have data that is comparable in quality with data that has been used in the past to estimate M{sub .}. However, we find no relation between the signal-to-noise ratio in the previously analyzed spectra and the uncertainties of the black hole masses derived from the spectra. We also find that there is a very limited number of appropriately observed stellar templates in the archive from which to estimate the effects of template mismatching.

79 ASTRONOMY AND ASTROPHYSICS↗

Longitudinal, intermodality registration of quantitative breast PET and MRI data acquired before and during neoadjuvant chemotherapy: Preliminary results

Purpose: The authors propose a method whereby serially acquired DCE-MRI, DW-MRI, and FDG-PET breast data sets can be spatially and temporally coregistered to enable the comparison of changes in parameter maps at the voxel level. Methods: First, the authors aligned the PET and MR images at each time point rigidly and nonrigidly. To register the MR images longitudinally, the authors extended a nonrigid registration algorithm by including a tumor volume-preserving constraint in the cost function. After the PET images were aligned to the MR images at each time point, the authors then used the transformation obtained from the longitudinal registration of the MRI volumes to register the PET images longitudinally. The authors tested this approach on ten breast cancer patients by calculating a modified Dice similarity of tumor size between the PET and MR images as well as the bending energy and changes in the tumor volume after the application of the registration algorithm. Results: The median of the modified Dice in the registered PET and DCE-MRI data was 0.92. For the longitudinal registration, the median tumor volume change was −0.03% for the constrained algorithm, compared to −32.16% for the unconstrained registration algorithms (p = 8 × 10{sup −6}). The medians of the bending energy were 0.0092 and 0.0001 for the unconstrained and constrained algorithms, respectively (p = 2.84 × 10{sup −7}). Conclusions: The results indicate that the proposed method can accurately spatially align DCE-MRI, DW-MRI, and FDG-PET breast images acquired at different time points during therapy while preventing the tumor from being substantially distorted or compressed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Paths Forward for Nuclear Energy: Using a Nationwide Post-Stratified Hierarchical Model to Facilitate Matching of New Nuclear Technologies to Receptive Host Communities

This project was a collaboration between the University of Oklahoma (OU) and the University of Michigan (UMich). The overall objective of the project was to address a critical problem facing the siting of nuclear facilities, where there is no mechanism for incorporating public attitudes at a state and local level into decision-making. Utilizing recent advances in data modeling over local spatial scales, the research team created a state and county level map of public attitudes towards nuclear energy. Current estimates for public acceptance of nuclear technologies primarily exists on a national level, and sub-national estimates of public opinion about reactor siting, research facilities, transport routes, or storage and disposal facilities are very scarce. Model results from this project provide a systematic basis for technology developers to evaluate public acceptance across alternative siting options as a critical component for weighing potential benefit-cost tradeoffs for alternative paths to deploy new nuclear facilities. The project utilized data from the largest database of nuclear attitudes in the US, coupled with Census and elections-related data as well as data on social vulnerability and proximity to current nuclear facilities. In addition to modeling public support, the team also developed an interactive map to showcase results, using an online tool called Public and Local Attitudes about Nuclear Energy Technologies (PLANET). The tool allows technology developers and stakeholders to interact with the model results and better understand variation in support for nuclear facility siting on a state and county level. The interactive nature of the tool also allows users to analyze results in a targeted way, by comparing levels of support across different states and/or counties as desired.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Geospatial Analysis of Built Infrastructure and Modeled Household Driving Patterns

The level of access to opportunities for a location can be quantified in the amount of time it takes to travel from a departure point to the destinations that somebody would want or need to visit. Isochrone maps are geometric representations of the area accessible from a departure point within a set amount of time. Informed in part by the National Household Travel Survey, this report merges location data for amenities and opportunities across six frequent destination categories – employment, education, health, food, community, and transportation – with isochrone maps generated by the TravelTime API, whose departure points are census tract population-weighted centroids. Using a “Points-In-Polygon” analysis, destinations that fall within a census tract’s isochrone are tallied as accessible from the region within one of three time thresholds: 15-, 30-, and 45-minutes by the walking, cycling, public transit, and driving modes of travel. We find that access to a high number of jobs within a typical commute duration is negatively correlated with annual household vehicle miles traveled (VMT). The spatial distribution of our data suggests that the high household VMT frequently seen surrounding the edges of major cities may be related to worker commutes into the city core, and that the high household VMT frequently seen in rural tracts may be related to the longer travel distances required to access a variety of key opportunities from these areas.

99 GENERAL AND MISCELLANEOUS↗

Pressure power spectra beneath a supersonic turbulent boundary layer.

Wind tunnel experiments up to Mach 3 have provided fluctuating wall-pressure spectra beneath a supersonic turbulent boundary layer to frequencies reaching 400 kHz by combining signals from piezoresistive silicon pressure transducers effective at low- and mid-range frequencies and piezoelectric quartz sensors to detect high frequency events. Data were corrected for spatial attenuation at high frequencies and for wind-tunnel noise and vibration at low frequencies. The resulting power spectra revealed the {omega}{sup -1} dependence for fluctuations within the logarithmic region of the boundary layer, but are essentially flat at low frequency and do not exhibit the theorized {omega}{sup 2} dependence. Variations in the Reynolds number or streamwise measurement location collapse to a single curve for each Mach number when normalized by outer flow variables. Normalization by inner flow variables is successful for the {omega}{sup -1} region but less so for lower frequencies. A comparison of the pressure fluctuation intensities with fifty years of historical data shows their reported magnitude chiefly is a function of the frequency response of the sensors. The present corrected data yield results in excess of the bulk of the historical data, but uncorrected data are consistent with lower magnitudes. These trends suggest that much of the historical compressible database may be biased low, leading to the failure of several semi-empirical predictive models to accurately represent the power spectra acquired during the present experiments.

33 ADVANCED PROPULSION SYSTEMS↗

Model Inputs, Outputs, and Scripts associated with: “Spatial microbial respiration variations in the hyporheic zones within the Columbia River Basin”

This data package is associated with the publication “Spatial microbial respiration variations in the hyporheic zones within the Columbia River Basin” published in the Journal of Geophysical Research: Biogeosciences (Son et al. 2022) available at doi: 10.1029/2021JG006654. This data package includes the key model inputs/outputs of the river corridor model for the Columbia River Basin (CRB) and the model source codes, which were used in the manuscript. The model is a carbon-nitrogen-coupled river corridor model (RCM), and the model is used to quantify hyporheic zone (HZ) aerobic and anaerobic respiration at the NHDPLUS stream reach scales. The RCM used in this study combines empirical substrate models derived from observations and three microbially driven reactions to compute respiration of the HZ for each National Hydrography Dataset (NHD) reach within the CRB. The reactions in HZs of each NHD reach include anaerobic respiration and two-step anaerobic respiration via denitrification. Our HZ respiration estimates are limited to the lotic (or flowing) stream/river systems, and do not account for the respiration process in water column. Note that the RCM only simulates the HZ’s contribution to the dissolved carbon dioxide (CO2) concentrations in the streams, and the CO2 emissions to the atmosphere are not modelled. The model computes at hourly timesteps because of the fast reaction rates. The key input data of the model are exchange flux, residence time, and stream solute (dissolved organic carbon (DOC), dissolved oxygen (DO), and nitrate concentrations). These inputs are constant over time and represent long-term averaged values.This modeling framework successfully quantified HZ respiration components over multiple scales. It revealed key mechanisms driving the spatial variation of HZ aerobic and anaerobic respiration in reaches with varying hydrologic and substrate conditions. Thus, this modeling study offers a testing hypothesis in different river system (e.g., climate and biomes) for the HZ respiration processes, and can be used as a sampling design tool for large-scale HZ experimental studies.This dataset contains five folders: (1) model_inputs, (2) model_outputs, (3) Rscripts, (4) figures, and (5) model_codes. It also contains a readme, file level metadata (FLMD), and data dictionary (dd). Please see the FLMD for a list of all the files contained in this data package and descriptions for each. The model_inputs folder contains the model inputs used to drive the model simulations. The model_outputs folder contains key model output files from the river corridor model. The Rscripts folder contains the Rscripts for pre- and post- processing model results. The figures folder contains the raw figures associated with the manuscript. The model_codes folder includes key model source codes/input files. All files are .jpg, .jpeg, .out, .e, .od, .dat, .sub, .F90, .0, .R, .sbx, .cpg, .sbn, .shx, .shp, .dbf, .prj, .tfw, .tif, .xml, .pdf, or .csv.

54 ENVIRONMENTAL SCIENCES↗

Sensor-Equipped Unmanned Surface Vehicle for High-Resolution Mapping of Water Quality in Low- to Mid-Order Streams

Longitudinal profiling of water quality via the deployment of sensors from watercraft has advanced the understanding of spatial patterns in large rivers and lakes; however, a similar approach in low- to mid-order streams is lacking. To fill this gap, we developed an unmanned surface vehicle (USV)-water quality measurement platform (the “AquaBOT”). The components of the AquaBOT included a nitrate sensor, multiparameter sonde (temperature, conductivity, turbidity, dissolved oxygen, chlorophyll), quantum sensor, and global positioning system (GPS) mounted to a small pontoon-style USV. The AquaBOT was tested in four streams and rivers in Iowa and Tennessee. All measured water quality parameters varied longitudinally, and greater ranges were generally observed along the low-order, agriculturally influenced streams in Iowa. Nitrate, in particular, was spatially heterogeneous. For example, during one run in early June, concentrations ranged from 10.5 to 12.5 mg N L –1 along a 2.3 km reach and hotspots were observed directly downstream of some tile drains. The spatial resolution of AquaBOT data collected in June was 10× higher than grab sampling data, and measurements were collected in less time and at a comparable cost. Here, the AquaBOT can complement existing measurement approaches and will lead to advancements in understanding the processes driving water quality along the stream-to-river continuum.

47 OTHER INSTRUMENTATION↗

Radiation Transport in Random Media With Large Fluctuations

Strongly heterogeneous media arise in several applications that include radiation shields, nuclear fuel, BWR moderators, clouds, planetary and stellar atmospheres, turbulent gases and plasmas. Neutral and charged particle transport computations in such media have relied heavily on formulating transport equations with spatially random coefficients (physical data) and developing solution methods to deal with the additional stochastic dimensions. Attempts at developing approximate closures that yield only low order statistical information (e.g., mean and variance of the flux) have proved to be highly restrictive under real physics conditions or rely on techniques that require fluctuation amplitudes to be small for robustness. Recently, stochastic spectral methods such as polynomial chaos and stochastic collocation have been developed for aleatoric uncertainty quantification and sensitivity analysis, and successfully applied in radiation transport work. Advances in UQ techniques have tended to focus on efficiently handling large numbers of uncertain variables but the rigorous stochastic basis of the approach also promotes its use in situations where stochasticity is due to spatial heterogeneity and the associated uncertainty is large. Here we apply these techniques to radiation transport in media with spatially randomly varying cross sections without restriction on fluctuation amplitudes. Specifically, we represent the cross sections as a lognormal spatial random process with specified mean, variance and covariance function and use a Karhunen-Loeve (KL) decomposition to generate cross section realizations that are strictly positive. Woodcock Monte Carlo (WMC) is then used to simulate transport using random sampling of cross sections and deterministic sampling based on a stochastic collocation technique. Numerical results for the mean and variance in the scalar flux and leakage currents are obtained for weak and strong random variations. We focus in this work on demonstrating the approach and defer application to specific problems to a future investigation. We have demonstrated that a combination of stochastic spectral representation and Woodcock Monte Carlo simulation allows efficient computation of radiation transport in strongly random media. The use of a lognormal distribution to represent the fluctuations in medium properties facilitates enforcement of strict positivity of cross section realizations, a condition that has challenged standard approaches that assume Gaussian fluctuations. The fact that the lognormal random process is a memoryless nonlinear transformation of a Gaussian process further enables efficient and accurate reconstruction of the random cross section realizations using a Karhunen-Loeve representation of the cross section. Finally, the robustness of this model enables fluctuations of arbitrarily large amplitude to be studied, using both random sampling Monte Carlo and more efficient stochastic collocation techniques. The present work is being extended to allow reconstruction of probability density functions of output variables using polynomial chaos representation, and to accommodate general cross section covariance functions. Also, techniques are being explored to more judiciously select ceiling cross sections to enhance the efficiency of Woodcock Monte Carlo for transport in random media. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗