Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Preparation and dielectric properties of B-doped SiC powders by combustion synthesis

The SiC(B) solid solution powders were synthesized via combustion reaction of Si/C system in Ar atmosphere, using boron powder as the dopant and polytetrafluoroethylene as the chemical activator, which were investigated by X-ray diffraction (XRD), scanning electronic microscope (SEM) and Raman spectra. Results show that the prepared powders are C-enriched SiC with C antisites and sp{sup 2} carbon defects in which the sp{sup 2} carbon is transformed to the sp{sup 3} carbon due to boron doping. The electric permittivities of the prepared powders were determined in the frequency range of 8.2-12.4 GHz. The dielectric real part {epsilon}' and dielectric loss tan {delta} of undoped powder have maximum values ({epsilon}' = 5.5-5.3, tan {delta} = 0.23-0.20), and decrease with increasing boron content. The mechanism of dielectric loss by doping has been discussed.

36 MATERIALS SCIENCE↗

Analysis of dislocation configurations in SiC crystals through X-ray topography aided by ray tracing simulations

Silicon carbide as a wide bandgap semiconductor is of great research interest for its widespread deployment in a range of electronic and optoelectronic devices, particularly in power electronics. However, defects in silicon carbide crystals are still major concerns that is hampering the development of high-performance devices. X-ray topography, particularly using the synchrotron beam has been instrumental in characterizing and analyzing defect configurations in silicon carbide crystals to optimize crystal growth as well as understand the effect of defects on device performance. Here, in recent years, the use of ray-tracing simulation technique based on the orientation contrast mechanism to simulate contrast of defects observed on actual X-ray topographs has proven to be an effective approach to investigate the nature of crystallographic defects in various semiconductors. This review discusses the principle of ray-tracing simulation and its application and modifications to incorporate the effects of surface relaxation and photoelectric absorption to better simulate different dislocations observed in 4H–SiC as well as 6H–SiC crystals of various orientations. The adaptation to weak beam topography and plane wave topography is also discussed. The application of ray-tracing simulation in dislocation characterization of silicon carbide of different polytypes is systematically reviewed including different types of dislocations observed in both off-axis wafers and axial-sliced samples through synchrotron X-ray topography under various beam conditions, recording geometries and reflections. The result of ray-tracing simulation is further utilized in other studies including the investigation of effective penetration depth of all types of dislocations lying on the basal plane on grazing-incidence X-ray topography.

Engineering↗

Microstructural evolution of neutron irradiated 3C-SiC

The microstructural response of neutron irradiated 3C-SiC have been investigated over a wide irradiation temperature and fluence range via qualitative and quantitative synchrotron-based X-ray diffraction characterization. Here, we identify several neutron fluence- and irradiation temperature-dependent changes in the microstructure, and directly highlight the specific defects introduced through the course of irradiation. By quantifying the microstructure, we aim to develop a more detailed understanding of the radiation response of SiC. Such studies are important to build mechanistic models of material performance and to understand the susceptibility of various microstructures to radiation damage for advanced energy applications.

36 MATERIALS SCIENCE↗

Reprint of: Microstructural evolution of neutron irradiated 3C-SiC

The microstructural response of neutron irradiated 3C-SiC have been investigated over a wide irradiation temperature and fluence range via qualitative and quantitative synchrotron-based X-ray diffraction characterization. Additionally, we identify several neutron fluence- and irradiation temperature-dependent changes in the microstructure, and directly highlight the specific defects introduced through the course of irradiation. By quantifying the microstructure, we aim to develop a more detailed understanding of the radiation response of SiC. Such studies are important to build mechanistic models of material performance and to understand the susceptibility of various microstructures to radiation damage for advanced energy applications.

36 MATERIALS SCIENCE↗

Leveraging computational thermodynamics to guide SiC-ZrC chemical vapor deposition process development

Here using the CALPHAD approach to understand zirconium carbide deposition, a series of phase equilibria were calculated from a custom thermodynamic database based on a literature source, and the equilibria were used to explore the potential chemical vapor deposition (CVD) processing space in the ZrCl 4 -CH 3 SiCl 3 -CH 4 -H 2 system as a function of pressure, temperature, and gas composition. Several gas ratios were considered. At a given ZrCl 4 :CH 3 SiCl 3 ratio within the range studied, the most important factor was found to be the ratios of CH 4 :ZrCl 4 , wherein the nature of the composition – carbide vs. silicide – could be controlled. A pure binary composition of ZrC and SiC is expected to form by increasing the initial amount of methane and decreasing the amount of hydrogen from values predicted purely based on thermodynamic equilibrium. Rietveld analysis of the x-ray diffractograms from corresponding experimental depositions confirmed that increasing the CH 4 :ZrCl 4 ratio increased the fraction of carbon-containing species (SiC, ZrC) and decreased the fraction of non-carbides (ZrSi, ZrSi 2 , etc.), as predicted from the CALPHAD results.

36 MATERIALS SCIENCE↗

Suppression of Rotational Twins in Epitaxial B 12 P 2 on 4H-SiC

B 12 P2 was grown epitaxially on (0001) 4H-SiC using two different substrate miscuts: a standard 4° miscut toward the [$11\bar{20}$] and a custom miscut 4° toward the [$1\bar{10}0$]. Epitaxy on substrates miscut to the [$11\bar{20}$] resulted in highly twinned B 12 P 2 films with a rotational twin density of approximately 70% twin orientation I and 30% twin orientation II. In contrast, epitaxy on substrates tilted toward the [$1\bar{10}0$] produced films of >99% twin orientation I. A H 2 etch model is used to explain the 4H-SiC surface morphology for each miscut prior to epitaxy and demonstrate how the surface steps influence the nucleation of B 12 P 2 twin orientations. Surface steps on substrates miscut to the [$11\bar{20}$] tend to be zig-zagged with steps rotated 60° from one another producing B 12 P 2 crystals that nucleate in orientations rotated by 60°, hence forming rotationally twinned films. In conclusion, steps on substrates tilted to the [$1\bar{10}0$] tend to be parallel resulting in crystallographically aligned B 12 P 2 nucleation.

36 MATERIALS SCIENCE↗

d -Electron Heavy Fermion Behavior in a Near-Room-Temperature Polar Metallic Ferrimagnet: A Case of Mn 5 SiC

Polycrystalline Mn 5 SiC was synthesized by using a high-temperature solid-state method. Mn 5 SiC adopts a polar space group (Cmc2 1 ) with six crystallographic Mn sites confirmed by X-ray and neutron diffraction, transmission electron microscopy, and second harmonic generation experiments. The complex crystal structure features edge-sharing trigonal prisms and icosahedra, as well as face/edge-sharing pentagonal prisms. Magnetic measurements indicate ferrimagnetic ordering with a transition temperature of 284 K. The ferrimagnetic structure (magnetic space group Cm’c’2 1 ) was further identified by powder neutron diffraction, where collinear Mn spins align along the crystallographic c-axis. The refined magnetic moment for each crystallographic Mn site at 4 K is 1.8(2), −2.42(9), −1.72(8), 0.51(6), 0.50(4), and 1.7(2) μ B . Density functional theory calculations confirm both the metallic behavior and the ferrimagnetic structure observed experimentally and further provide insight into the observed Mn moment dependence across crystallographic sites. The resistivity and specific heat measurements and density functional theory calculations reveal a substantially large Kadowaki–Woods ratio of 5 × 10 –5 μΩ·cm/(mJ/mol) 2 and a many-body renormalization factor of 5.5, indicating the unusual heavy Fermion behavior in such an itinerant magnetic metal.

Messegee, Zachary T. [George Mason University, Fai↗

Arrays of Si vacancies in 4 H -SiC produced by focused Li ion beam implantation

Point defects in SiC are an attractive platform for quantum information and sensing applications because they provide relatively long spin coherence times, optical spin initialization, and spin-dependent fluorescence readout in a fabrication-friendly semiconductor. The ability to precisely place these defects at the optimal location in a host material with nano-scale accuracy is desirable for integration of these quantum systems with traditional electronic and photonic structures. Here, we demonstrate the precise spatial patterning of arrays of silicon vacancy (${V}_{Si}$) emitters in an epitaxial 4H -SiC (0001) layer through mask-less focused ion beam implantation of Li + . We characterize these arrays with high-resolution scanning confocal fluorescence microscopy on the Si-face, observing sharp emission lines primarily coming from the ${V1}^{{\prime}}$ zero-phonon line (ZPL). The implantation dose is varied over 3 orders of magnitude, leading to ${V}_{Si}$ densities from a few per implantation spot to thousands per spot, with a linear dependence between ZPL emission and implantation dose. Optically-detected magnetic resonance (ODMR) is also performed, confirming the presence of V2 ${V}_{Si}$. Our investigation reveals scalable and reproducible defect generation.

36 MATERIALS SCIENCE↗

Controllable growth of vertically aligned graphene on C-face SiC

We investigated how to control the growth of vertically aligned graphene on C-face SiC by varying the processing conditions. It is found that, the growth rate scales with the annealing temperature and the graphene height is proportional to the annealing time. Temperature gradient and crystalline quality of the SiC substrates influence their vaporization. The partial vapor pressure is crucial as it can interfere with further vaporization. A growth mechanism is proposed in terms of physical vapor transport. The monolayer character of vertically aligned graphene is verified by Raman and X-ray absorption spectroscopy. With the processed samples, d 0 magnetism is realized and negative magnetoresistance is observed after Cu implantation. We also prove that multiple carriers exist in vertically aligned graphene.

36 MATERIALS SCIENCE↗

Plant-based CO 2 drawdown and storage as SiC

Since the 1950's the Earth's natural carbon cycle has not sufficiently sequestrated excess atmospheric CO 2 contributed by human activities. CO 2 levels rose above 400 ppm in 2013 and are forecasted to exceed 500 ppm by 2070, a level last experienced during the Paleogene period 25–65 MYA. While humanity benefits from the extraction and combustion of carbon from Earth's crust, we have overlooked the impact on global climate change. Here, we present a strategy to mine atmospheric carbon to mitigate CO 2 emissions and create economically lucrative green products. We employ an artificial carbon cycle where agricultural plants capture CO 2 and the carbon is transformed into silicon carbide (SiC), a valuable commercial material. By carefully quantifying the process we show that 14% of plant-sequestered carbon is stored as SiC and estimate the scale needed for this process to have a global impact.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduction of Effective Carrier Density and Charge Collection Efficiency in SiC Devices Due to Radiations

6H-Silicon Carbide (SiC) diodes were fabricated and irradiated with Co-60 gamma-rays, 1 MeV electrons, and 65 MeV protons. After the radiation damage was introduced in devices, the Charge Collection Efficiency (CCE) was evaluated by using the Transient Ion Beam Induced Current (TIBIC) system. The effective carrier density was also estimated from Capacitance-Voltage (C-V) characteristics. It was found that both the CCE and the effective carrier density decrease with increase in the fluence. We discuss whether Non-Ionizing Energy Loss (NIEL) analysis can estimate the degradation in these parameters. Results from this study suggest that the damage factors of these parameters in SiC can be scaled by the NIEL.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The 3C-6H polytypic transition in SiC as revealed by diffuse x-ray scattering

The 3C-6H polytypic transition in SiC single crystals is studied by means of diffuse x-ray scattering. Based on numerical simulations of the diffuse scattering intensity distribution we unambiguously prove that the 3C-6H transition in SiC occurs through the glide of partial dislocations and not by the ''layer displacement'' mechanism (i.e., local diffusional rearrangement of the Si and C atoms). The technique is extremely sensitive and can be used as a nondestructive mean to obtain statistically relevant values of the transition level down to {approx}0.05%.

36 MATERIALS SCIENCE↗

Substrate doping effects on Raman spectrum of epitaxial graphene on SiC

In this paper, we reported a Raman scattering study of epitaxial graphene on different doped 6H-SiC (0001) substrates and investigated the substrate induced charge-transfer doping to the epitaxial graphene. We found that the charge carrier type and concentration of epitaxial graphene can be altered by SiC substrates with different doping level and doping type. This effect is comparable to that obtained by electrochemical doping. As Raman scattering is very sensitive to the doping level, the charge carrier concentration of epitaxial graphene can be estimated by the Raman G-peak shift. Our results are fundamental and may have implications for future epitaxial-graphene-based micro/nanoelectronic devices.

36 MATERIALS SCIENCE↗

Growth kinetics and electronic properties of unintentionally doped semi-insulating GaN on SiC and high-resistivity GaN on sapphire grown by ammonia molecular-beam epitaxy

Growth of unintentionally doped (UID) semi-insulating GaN on SiC and highly resistive GaN on sapphire using the ammonia molecular-beam epitaxy technique is reported. The semi-insulating UID GaN on SiC shows room temperature (RT) resistivity of 10{sup 11} {Omega} cm and well defined activation energy of 1.0 eV. The balance of compensation of unintentional donors and acceptors is such that the Fermi level is lowered to midgap, and controlled by a 1.0 eV deep level defect, which is thought to be related to the nitrogen antisite N{sub Ga}, similar to the ''EL2'' center (arsenic antisite) in unintentionally doped semi-insulating GaAs. The highly resistive GaN on sapphire shows RT resistivity in range of 10{sup 6}-10{sup 9} {Omega} cm and activation energy varying from 0.25 to 0.9 eV. In this case, the compensation of shallow donors is incomplete, and the Fermi level is controlled by levels shallower than the 1.0 eV deep centers. The growth mechanisms for the resistive UID GaN materials were investigated by experimental studies of the surface kinetics during growth. The required growth regime involves a moderate growth temperature range of 740-780 deg. C, and a high ammonia flux (beam equivalent pressure of 1x10{sup -4} Torr), which ensures supersaturated coverage of surface adsorption sites with NH{sub x} radicals. Such highly nitrogen rich growth conditions lead to two-dimensional layer by layer growth and reduced oxygen incorporation.

36 MATERIALS SCIENCE↗

Deep levels induced by reactive ion etching in n- and p-type 4H-SiC

In this study, the authors investigate deep levels, which are induced by reactive ion etching (RIE) of n-type/p-type 4H-SiC, by deep level transient spectroscopy (DLTS). The capacitance of a Schottky contact fabricated on as-etched p-type SiC is abnormally small due to compensation or deactivation of acceptors extending to a depth of {approx}14 {mu}m, which is nearly equal to the epilayer thickness. The value of the capacitance can recover to that of a Schottky contact on as-grown samples after annealing at 1000 deg. C. However, various kinds of defects, IN2 (E{sub C}-0.30 eV), EN (E{sub C}-1.6 eV), IP1 (E{sub V}+0.30 eV), IP2 (E{sub V}+0.39 eV), IP4 (HK0: E{sub V}+0.72 eV), IP5 (E{sub V}+0.85 eV), IP7 (E{sub V}+1.3 eV), and EP (E{sub V}+1.4 eV), remain at a high concentration (average of total defect concentration in the region ranging from 0.3 {mu}m to 1.0 {mu}m:{approx}5x10{sup 14} cm{sup -3}) even after annealing at 1000 deg. C. The concentration of all these defects generated by RIE, except for the IP4 (HK0) center, remarkably decreases by thermal oxidation. In addition, the HK0 center can also be reduced significantly by a subsequent annealing at 1400 deg. C in Ar.

36 MATERIALS SCIENCE↗

AlN thin films grown on epitaxial 3C-SiC (100) for piezoelectric resonant devices

Highly c-axis oriented heteroepitaxial aluminum nitride (AlN) films were grown on epitaxial cubic silicon carbide (3C-SiC) layers on Si (100) substrates using alternating current reactive magnetron sputtering at temperatures between approximately 300-450 deg. C. The AlN films were characterized by x-ray diffraction, scanning electron microscope, and transmission electron microscopy. A two-port surface acoustic wave device was fabricated on the AlN/3C-SiC/Si composite structure, and an expected Rayleigh mode exhibited a high acoustic velocity of 5200 m/s. The results demonstrate the potential of utilizing AlN films on epitaxial 3C-SiC layers to create piezoelectric resonant devices.

36 MATERIALS SCIENCE↗

Reversible ultraviolet light-manipulated superhydrophobic-to-superhydrophilic transition on a tubular SiC nanostructure film

We demonstrate the ultraviolet (UV) light-induced, reversible wettability behavior for tubular SiC nanostructure film. The as-synthesized tubular SiC nanostructure film shows the superhydrophilic nature with the water contact angle 152.4 deg. and low sliding angle. Moreover, the surface transition between superhydrophobicity and superhydrophilicity can be easily achieved by the alternation of UV irradiation and closed thermal heating. A possible mechanism is also proposed to explain the reversible wettability behavior.

36 MATERIALS SCIENCE↗

Detailed study of the influence of surface misorientation on the density of Anti-Phase Boundaries in 3C-SiC layers grown on (001) silicon

In this work we investigated the influence of the Si substrate misorientation and 3C-SiC film thickness on the density of Anti-Phase Boundaries, in order to better understand the mechanism of antiphase domain annihilation. The two highlights in our work are the utilization of [001] orientated Si on-axis wafer with spherical dimples, which gave us access to a continuum of off-cut angles (0 deg. to {approx}11 deg.) and directions, and the deposition of elongated silicon islands on the surface of 3C-SiC epilayers, which improved the detection of APDs by analysis of Scanning Electron Microscopy images. We found that for a given layer thickness the relative surface occupation of one domain increases with the off-cut angle value, leading to single domain film up to a certain angle. This critical value is reduced as the film is thickened.

36 MATERIALS SCIENCE↗