Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Uranium from Seawater Marine Testing Program at the University of Miami’s Broad Key Island Research Station

Marine testing at Broad Key Island (BKI), Florida was conducted to validate adsorption capacity and adsorption kinetics results obtained for several formulations of the ORNL amidoxime-based polymeric adsorbents in Sequim Bay, Washington in another location with different oceanographic and water quality conditions (e.g. temperature, dissolved organic carbon, salinity and trace element content). Broad Key is a small island off the southeast coast of Florida at the southern end of Biscayne Bay. Flow-through column and recirculating flume experiments were conducted at BKI using ambient filtered seawater and identical exposure systems as were used at the Pacific Northwest National Laboratory’s (PNNL) Marine Sciences laboratory (MSL). Testing was conducted in two periods in FY 2015 and FY 2016 with five different amidoxime-based adsorbent materials, four produced by ORNL (AF1, AI8, AF8, and AF1-DMSO) and one by LCW technologies (LCW-10). All exposures were conducted at ambient seawater temperatures, with moderate temperature control on the ambient seawater to mitigate large daily swings in the seawater temperature. The ORNL adsorbents AF1, AI8 and AF1-AO-DMSO all had fairly similar adsorption capacities (6.0 to 6.6 g U/ kg adsorbent) after 56 days of exposure at ambient temperature (26 to 31 °C) and salinity (35.7 to 37.4), but the AF8 adsorbent was considerably lower at 4.4 g U/kg adsorbent. All the adsorbents tested at BKI had higher capacities than was observed at PNNL, with the higher temperatures likely a major factor contributing to this difference. In general, the elemental distribution (expressed as a relative percentage) on all the adsorbents agreed well, including good agreement with the elemental distribution pattern for AF1 adsorbent exposed at PNNL. The most notable exception to a uniform elemental distributional pattern across the various adsorbents occurs with vanadium. The relative mass percentage for vanadium retained by the adsorbents ranged from a minimum of 13% for the AF8 formulation to a maximum of 29% for the AI8 formulation. All the V/U mass ratios at BKI are lower than observed for the AF1 adsorbent at PNNL (3.0). Temperature likely plays a significant role in the V/U mass ratio difference between BKI and PNNL. Because uranium has a higher adsorption capacity at higher temperatures, one would expect that warmer exposures would favor a lower V/U mass ratio, which could explain why the V/U mass ratio for the PNNL exposures are higher than observed for the BKI exposures. Marine Testing at BKI offers the opportunity to test adsorbent performance under warmer ambient and more saline conditions than exist at the marine test site on Sequim Bay. This is particularly important since the amidoxime-based adsorbents respond strongly to temperature. In addition, since salinities are about 15% higher at BKI compared to Sequim Bay (36 vs. 31), uranium adsorption capacities are about 15% higher at the BKI site compared to Sequim Bay.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Maximum Radionuclide Groundwater Concentrations for Basement Fill Model. Zion Station Restoration Project

The objectives of this report are; To present a simplified conceptual model for release from the buildings with residual subsurface structures that can be used to provide an upper bound on contaminant concentrations in the fill material; Provide maximum water concentrations and the corresponding amount of mass sorbed to the solid fill material that could occur in each building for use in dose assessment calculations; Estimate the maximum concentration in a well located outside of the fill material; and Perform a sensitivity analysis of key parameters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Basement Fill Model Evaluation of Maximum Radionuclide Concentrations for Initial Suite of Radionuclides. Zion Station Restoration Project

ZionSolutions is in the process of decommissioning the Zion Nuclear Power Plant. The current decommissioning plan involves removing all above-grade structures to a depth of 3 feet below grade. The remaining underground structures will be backfilled with clean material. The final selection of fill material has not been made. The remaining backfilled structures will be the two reactor Containment Buildings, a Spent Fuel Building, an Auxiliary Building, a Turbine Building, a Crib House/Forebay Building and a Waste Water Treatment Facility (WWTF).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Level 1 Electric Vehicle Charging Stations at the Workplace

Level 1 charging (110-120 V) can be a good fit for many workplace charging programs. This document highlights the experiences of a selection of Workplace Charging Challenge partners that use Level 1 charging.

33 ADVANCED PROPULSION SYSTEMS↗

Steam Oxidation, Burst and Critical Heat Flux Testing of FeCrAl Cladding in the Severe Accident Test Station

Since August 2011, Oak Ridge National Laboratory (ORNL) has been evaluating the steam oxidation resistance of a wide range of materials to identify a potential accident tolerant fuel (ATF) cladding [1-14]. The primary goal of an ATF cladding is to enhance safety margins in light water reactors (LWR) during beyond design basis accident scenarios (such as the nuclear accident at Fukushima Daiichi in March 2011) without requiring changes to the reactor design or fuel enrichment, or significantly affecting reactor economics during normal operation.

36 MATERIALS SCIENCE↗

Detection of Upwind Pathogens Using Aircraft and Ground Stations

The first reported investigations of microorganism occurrence in the air can be traced back to early 19th century. Since then the study of bioaerosols have come a long way, however, it remains a poorly understood area(Després et al. 2012). The actual identity, diversity, and abundance of distinct types of bioaerosol particles as well as their temporal and spatial variability are not well characterized. Bioaerosols play a key role in the dispersal of reproductive units from plants and microbes (pollen, spores, etc.), for which the atmosphere enables transport over geographic barriers and long distances(FröhlichNowoisky et al. 2016). The dispersal of plant, animal, and human pathogens and allergens has major implications for agriculture and public health. We hypothesized that airborne microbes can reach the upper atmosphere (i.e., above the boundary layer ~2 km in altitude) and deliver disease into downwind destinations. We utilized a unique set of bioaerosol samples from atmospheric aircraft observatories (NASA) to study the microbial diversity, abundance, and viability of bioaerosols reaching California during the springtime when the jet stream delivers the largest amount of Asian transpacific aerosols to N. America. We collaborated with a NASA Ames with unique access to upper troposphere and lower stratosphere bioaerosol samples on the Pacific Coast of California. We analyzed the aerosol samples using microbiological techniques, shotgun metagenomic sequencing and advanced bioinformatic tools to identify the viable and total microbial species that were detected. A number of bacterial and fungal species were identified. This study provided a deeper understanding of the microbial species that can survive in the upper atmospheric conditions. This study set the foundation for future studies on better understanding of the potential impact of airborne microbes on disease transmission affecting human, animal, or crop health.

59 BASIC BIOLOGICAL SCIENCES↗

PixelStorm: A Remote Display for Remote Sensing Ground Stations

PixelStorm is a software application for displaying native high-performance applications from remote cloud environments. It is tailored for remote sensing missions that require high framerates, high resolutions, and minimal loss of quality. PixelStorm utilizes hardware-accelerated video compression on graphics processing units and a Sandia-developed streaming network protocol. Using our architecture, we can demonstrate interactive native applications running across two 4K monitors at 60 frames per second while maintaining the visual fidelity required by our missions. This technology allows for the migration of mission critical desktop applications to cloud environments.

97 MATHEMATICS AND COMPUTING↗

Integrated Air Activity Derived Response Levels for the Defense Threat Reduction Agency's Air Monitoring Stations

This report was developed to help the U.S. Defense Threat Reduction Agency understand the radionuclide detection requirements necessary to establish air monitoring systems that can detect airborne radionuclide activity at levels that could warrant protective actions.. The report provides representative integrated air activity derived response levels that correspond to the U.S. Environmental Protection Agency's protective action guidelines for the Early Phase (0-96 h) following a release to the environment. Environmental releases from nuclear fallout, nuclear power plants, and radiological dispersal devices are considered.

54 ENVIRONMENTAL SCIENCES↗

Image Station Use Examples from DARHT [Slides]

This presentation covers these topics: the beam envelope equation for tuning, Optical Transition Radiation (OTR), the solenoid scan method for beam identification, the Pepper-pot method for beam identification, and Beam-target studies via gated imaging.

43 PARTICLE ACCELERATORS↗

Co-Development of Oscillating Water Column (OWC) and Offshore Power Station

The project proposed an Oscillating Water Column (OWC) at a low power rating (1-5kW); to build a prototype and perform field testing within 1–3 years and achieving a commercial version of the OWC 3–5 years. We selected the OWC off-the-shelf components to secure the supply-chain sources and to warrant stable and minimum pricing. We want to curtail the capital cost by reducing the weight and volume of the overall system structure at the design level by designing a high-speed turbine generator and optimizing the airspeed amplification. We want to minimize the operational and maintenance (O&M) costs through simplified architecture, minimal parts, modular/plug-and-play, and easy access designs.

16 TIDAL AND WAVE POWER↗

Full-scale FEED Study for Retrofitting the Prairie State Generating Station with an 816 MWe Capture Plant using Mitsubishi Heavy Industries Post-Combustion CO 2 Capture Technology

A full front-end engineering design (FEED) study to for a carbon capture system for Unit #2 (816 MWe) at the Prairie State Generating Company’s (PSGC) Energy Campus in Marissa, IL based on the KM CDR Process CO 2 capture technology from Mitsubishi Heavy Industries (MHI) using their proprietary solvent KS-21TM. If built this carbon capture plant would be the world's largest to date. The cost of capture of 100 percent of the plant emissions was calculated to be $43.42 per metric tonne of CO 2 based on levelized costs for 30 years of operation (85% capacity factor), and includes Interest on Debt and Return on Equity During Operation.

01 COAL, LIGNITE, AND PEAT↗