Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Conduction mechanism of sputtered BaTiO{sub 3} film on Ni substrate

BaTiO{sub 3} (BTO) thin film capacitors were deposited on Ni substrate using rf magnetron sputtering. Microstructural studies by x-ray diffraction and transmission electron microscopy reveal that the as-grown BTO films have the columnar structure and the good interface structure. Postdeposition anneal results in the recrystallization of BTO films. The electrical measurements exhibit that the BTO films have high capacitance densities and low leakage currents.

36 MATERIALS SCIENCE↗

Giant tunneling magnetoresistance up to 330% at room temperature in sputter deposited Co{sub 2}FeAl/MgO/CoFe magnetic tunnel junctions

Magnetoresistance ratio up to 330% at room temperature (700% at 10 K) has been obtained in a spin-valve-type magnetic tunnel junction (MTJ) consisting of a full-Heusler alloy Co{sub 2}FeAl electrode and a MgO tunnel barrier fabricated on a single crystal MgO (001) substrate by sputtering method. The output voltage of the MTJ at one-half of the zero-bias value was found to be as high as 425 mV, which is the largest reported to date in MTJs using Heusler alloy electrodes. The present finding suggests that Co{sub 2}FeAl may be one of the most promising candidates for future spintronics devices applications.

36 MATERIALS SCIENCE↗

Negative ion surface production through sputtering in hydrogen plasma

A graphite sample is negatively biased in a hydrogen plasma. H{sup -} ions created on the surface are accelerated by the sheath toward a mass spectrometer where they are detected according to their energy. The ion distribution function shows two contributions: a main peak followed by an energetic tail. It was previously proven backscattering of positive ions as negative ions is responsible for the high energy tail. In this paper we demonstrate 75% of negative ion surface production is coming from sputtering of adsorbed hydrogen atoms as negative ions. The positive ion energy threshold for this mechanism is around 20 eV and its maximum around 70 eV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transparent photostable ZnO nonvolatile memory transistor with ferroelectric polymer and sputter-deposited oxide gate

We report on the fabrication of transparent top-gate ZnO nonvolatile memory thin-film transistors (NVM-TFTs) with 200 nm thick poly(vinylidene fluoride/trifluoroethylene) ferroelectric layer; semitransparent 10 nm thin AgO{sub x} and transparent 130 nm thick indium-zinc oxide (IZO) were deposited on the ferroelectric polymer as gate electrode by rf sputtering. Our semitransparent NVM-TFT with AgO{sub x} gate operates under low voltage write-erase (WR-ER) pulse of {+-}20 V, but shows some degradation in retention property. In contrast, our transparent IZO-gated device displays very good retention properties but requires anomalously higher pulse of {+-}70 V for WR and ER states. Both devices stably operated under visible illuminations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and tribological properties of Ti-contained amorphous carbon film deposited by DC magnetron sputtering

Pure amorphous carbon (a-C) film and that with a small amount of Ti were deposited on high speed steel (W18Cr4V) substrates by means of dc closed field unbalanced magnetron sputtering. The chemical composition and microstructure of the a-C films were performed using x-ray photoelectron spectroscopy, x-ray diffraction, Raman spectra, and transmission electron microscopy. The mechanical and tribological properties were evaluated using a nanoindentor, Rockwell and scratch tests, and a conventional ball-on-disk tribometer, respectively. The pure a-C film showed the high hardness (53 GPa), elastic modulus (289 GPa), but the poor adhesive strength. When adding a small amount of Ti to the a-C film, both the adhesive strength and the tribological properties were improved. The Ti contained a-C film had the low wear rate (1.9x10{sup -17} m{sup 3} N{sup -1} m{sup -1}) and friction coefficient in humid air.

36 MATERIALS SCIENCE↗

Reactive dc magnetron sputtering of (GeO{sub x}-SiO{sub 2}) superlattices for Ge nanocrystal formation

The motivation of this work is the tailored growth of Ge nanocrystals for photovoltaic applications. The use of superlattices provides a reliable method to control the Ge nanocrystal size after phase separation. In this paper, we report on the deposition of (GeO{sub x}-SiO{sub 2}) superlattices via reactive dc magnetron sputtering and the self-ordered Ge nanocrystal formation during subsequent annealing. Attention is directed mainly to define proper deposition conditions for tuning the GeO{sub x} composition between elemental Ge (x=0) and GeO{sub 2} (x=2) by the variation in the deposition temperature and the oxygen partial pressure. A convenient process window has been found which allows sequential GeO{sub x}-SiO{sub 2} deposition without changing the oxygen partial pressure during deposition. The phase separation and Ge nanocrystal formation after subsequent annealing were investigated with in situ x-ray scattering, Raman spectroscopy, and electron microscopy. By these methods the existence of 2-5 nm Ge nanocrystals at annealing temperatures of 600-750 deg. C has been confirmed which is within the superlattice stability range. The technique used allows the fabrication of superlattice stacks with very smooth interfaces (roughness<1 nm); thus the Ge nanocrystal layers could be separated by very thin SiO{sub 2} films (d<3 nm) which offers interesting possibilities for charge transport via direct tunneling.

36 MATERIALS SCIENCE↗

High-frequency magnetic properties of Zn ferrite films deposited by magnetron sputtering

The effect of thermal annealing on structural and magnetic properties has been investigated for Zn ferrite films deposited on Si (111) substrates using radio frequency magnetron sputtering. The saturation magnetization at room temperature was enhanced upto 303 emu/cm{sup 3} by annealing at relatively low temperature of 200 deg. C and decreased at higher temperatures. The complex permeability {mu}={mu}{sup '}-i{mu}{sup ''} values of the ferrite films as-deposited and annealed at 200 and 400 deg. C were measured at frequency upto 5 GHz. These films exhibited better high-frequency properties, especially, the film annealed at 200 deg. C had a large {mu}{sup '} of 19.5 and high resonance frequency f{sub r} of 1.61 GHz. And the reason was investigated preliminarily based on the bianisotropy model.

36 MATERIALS SCIENCE↗

Modeling metallic nanoparticle synthesis in a magnetron-based nanocluster source by gas condensation of a sputtered vapor

Copper nanoparticles (NPs) were synthesized by inert-gas condensation of a sputtered metallic vapor using a dedicated commercial reactor. By controlling the time of residence of NPs in the carrier gas phase via the tuning of the collision path length, Cu NPs were produced. They exhibit various and well controlled diameters (3-10 nm) and a relatively narrow size dispersion. On the basis of these experimental results, a detailed modeling of NP nucleation and growth based on the classical nucleation theory was developed. It takes into account the peculiar geometry and thermal profile of the NP reactor. The simulated curves, calculated by a MATLAB program developed for that purpose, exhibit a good qualitative agreement with experiment. Moreover, they highlight the role of process parameters and the strong influence of the reactor temperature profile on the NP size distribution. In the future, such calculations could be used for the optimization of the NP source design in order to increase its efficiency and reproducibility.

36 MATERIALS SCIENCE↗

Size dependent strengthening mechanisms in sputtered Fe/W multilayers

We investigate size dependent strengthening mechanisms in sputtered Fe/W multilayers with individual layer thickness, h, varying from 1 to 200 nm. Microstructure analyses reveal that Fe/W has incoherent bcc/bcc interface when h is greater than 5 nm. When h decreases to 1-2.5 nm, the interface becomes semicoherent, and Fe and W show significant lattice distortions comparing to their bulk counterpart due to interface constraint. The layer thickness dependent drastic variations in x-ray diffraction profiles are simulated well by using an analytical model. Film hardness increases with decreasing h, and approaches a maximum value of 12.5 GPa when h is 1 nm. The layer thickness dependent film hardnesses are compared with analytical models. Koehler's image force plays a major role in determining the maximum strength of composites at smaller h.

36 MATERIALS SCIENCE↗

Confinement in PbSe wires grown by rf magnetron sputtering

Lead selenide (PbSe) nanowires were grown by magnetron sputtering on silicon with silicon dioxide (SiO{sub 2}/Si) substrates, and characterized by scanning electron microscopy, x-ray diffraction, Fourier transform infrared spectroscopy, photoluminescence, and x-ray photoelectron spectroscopy. Closely packed PbSe nanowires of approximately 100 nm diameter grew in the <111> rock-salt cubic structure orientation. These large wires showed a large blueshift in the luminescence and absorption compared to the bulk crystal, demonstrating quantum confinement. This is attributed to a strong built-in field due to surface states, band bending, and a depletion layer which confines the carrier states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sputtering-induced Co{sup 0} formation in x-ray photoelectron spectroscopy of nanocrystalline Zn{sub 1-x}Co{sub x}O spinodal enrichment models

Nanoscale enrichments resulting from spinodal decomposition have been proposed to contribute to the interesting magnetic properties of diluted magnetic oxides such as cobalt-doped ZnO (Zn{sub 1-x}Co{sub x}O), but little is known experimentally about the electronic structures or physical properties of such enrichments. Here, x-ray photoelectron spectroscopy (XPS) is used to examine wurtzite Zn{sub 1-x}Co{sub x}O crystallites over the full composition range (0.0{<=}x{<=}1.0) that serve as models of the proposed spinodal decomposition nanostructures within Zn{sub 1-x}Co{sub x}O bulk materials. With increasing x, the valence band edge shifts to smaller binding energies and the cobalt 2p peaks shift to greater binding energies, providing spectroscopic signatures that may allow identification of spinodal decomposition in bulk Zn{sub 1-x}Co{sub x}O. Reduction of Co{sup 2+} to Co{sup 0} by argon ion (Ar{sup +}) sputtering was also found to become markedly more facile with increasing x, suggesting that locally-enriched Zn{sub 1-x}Co{sub x}O is at greater risk of yielding false-positive Co{sup 0} XPS signals than uniformly dilute Zn{sub 1-x}Co{sub x}O with the same overall composition.

36 MATERIALS SCIENCE↗

Influence of the substrate stiffness on the crystallization process of sputtered TbFe{sub 2} thin films

Despite the giant magnetostriction of TbFe{sub 2}, this material has a very limited popularity in real applications, due to the difficulties for obtaining the Laves phase on thin films. Here we report on the properties of annealed TbFe{sub 2} films deposited by sputtering on different substrates and with different buffer materials. We find that the presence of the highly magnetostrictive Laves phase is not necessarily related to crystallinity of the substrate. Strikingly we find a correlation between the degree of TbFe{sub 2} crystallization and the rigidity of the substrate or the buffer layer underneath the TbFe{sub 2}. This opens the possibility of easy manufacturing of devices based on TbFe{sub 2} layers.

36 MATERIALS SCIENCE↗

Atomic force microscopy study of the growth mechanisms of nanostructured sputtered Au film on Si(111): Evolution with film thickness and annealing time

Nanostructured Au films were deposited on Si(111) by room-temperature sputtering. By the atomic force microscopy technique we studied the evolution of the Au film morphology as a function of the film thickness h and annealing time t at 873 K. By the study of the evolution of the mean vertical and horizontal sizes of the islands forming the film and of their fraction of covered area as a function of h from 1.7x10{sup 17} to 1.0x10{sup 18} Au/cm{sup 2} we identified four different growth stages such as: (1) 1.7x10{sup 17{<=}}h{<=}3.0x10{sup 17} Au/cm{sup 2}, nucleation of nanometric three-dimensional (3D) hemispherical Au clusters; (2) 3.0x10{sup 17}<h{<=}5.2x10{sup 17} Au/cm{sup 2}, lateral growth of the Au clusters; (3) 5.2x10{sup 17}<h{<=}7.7x10{sup 17} Au/cm{sup 2}, coalescence of the Au clusters; (4) 7.7x10{sup 17}<h{<=}1.0x10{sup 18} Au/cm{sup 2}, vertical growth of the coalesced Au clusters. The application of the dynamic scaling theory of growing interfaces allowed us to calculate the dynamic scaling exponent z=3.8{+-}0.3, the dynamic growth exponent {beta}=0.38{+-}0.03, the roughness exponent {alpha}=1.4{+-}0.1 and the Avrami exponent m=0.79{+-}0.02. Finally, the study of the evolution of the mean Au clusters size as a function of annealing time at 873 K allowed us to identify the thermal-induced self-organization mechanism in a surface diffusion limited ripening of 3D structures and also the surface diffusion coefficient of Au on Si(111) at 873 K was estimated in (8.2x10{sup -16}){+-}(3x10{sup -17}) m{sup 2}/s.

36 MATERIALS SCIENCE↗

p-type conduction in sputtered indium oxide films

We report p-type conductivity in intrinsic indium oxide (IO) films deposited by magnetron sputtering on fused quartz substrates under oxygen-rich ambient. Highly oriented (111) films were studied by x-ray diffraction, optical absorption, and Hall effect measurements. We fabricated p-n homojunctions on these films.

36 MATERIALS SCIENCE↗

Wurtzite structure Sc{sub 1-x}Al{sub x}N solid solution films grown by reactive magnetron sputter epitaxy: Structural characterization and first-principles calculations

AlN(0001) was alloyed with ScN with molar fractions up to {approx}22%, while retaining a single-crystal wurtzite (w-) structure and with lattice parameters matching calculated values. Material synthesis was realized by magnetron sputter epitaxy of thin films starting from optimal conditions for the formation of w-AlN onto lattice-matched w-AlN seed layers on Al{sub 2}O{sub 3}(0001) and MgO(111) substrates. Films with ScN contents between 23% and {approx}50% exhibit phase separation into nanocrystalline ScN and AlN, while ScN-rich growth conditions yield a transformation to rocksalt structure Sc{sub 1-x}Al{sub x}N(111) films. The experimental results are analyzed with ion beam analysis, x-ray diffraction, and transmission electron microscopy, together with ab initio calculations of mixing enthalpies and lattice parameters of solid solutions in wurtzite, rocksalt, and layered hexagonal phases.

36 MATERIALS SCIENCE↗

Role of oxygen atoms in the growth of magnetron sputter-deposited ZnO films

The role of oxygen atoms in the growth of magnetron sputter-deposited ZnO films was studied by alternating the deposition of a several-nanometer-thick ZnO layer and the O{sub 2}/Ar mixture plasma exposure, i.e., layer-by-layer technique. The film crystallization promoted with suppressing the oxygen vacancy and interstitial defects by adjusting the exposure condition of O{sub 2}/Ar plasma. These findings suggest that the chemical potential of oxygen atom determine the film crystallization as well as the electronic state. The diffusion and effusion of oxygen atoms at the growing surface play a role of thermal annealing, promoted the film crystallization as well as the creation and the annihilation of oxygen and zinc related defects. The role of oxygen atoms reaching at the film-growing surface is discussed in term of chemical annealing. The possible oxygen diffusion mechanism is proposed.

36 MATERIALS SCIENCE↗

Two dimensional electron gases in polycrystalline MgZnO/ZnO heterostructures grown by rf-sputtering process

This paper reports the formation of two-dimensional electron gas (2DEG) in rf-sputtered defective polycrystalline MgZnO/ZnO heterostructure via the screening of grain boundary potential by polarization-induced charges. As the MgZnO thickness increases, the sheet resistance reduces rapidly and then saturates. The enhancement of the interfacial polarization effect becomes stronger, corresponding to a larger amount of resistance reduction, when the Mg content in the cap layer increases. Monte Carlo method by including grain boundary scattering effect as well as 2D finite-element-method Poisson and drift-diffusion solver is applied to analyze the polycrystalline heterostructure. The experimental and Monte Carlo simulation results show good agreement. From low temperature Hall measurement, the carrier density and mobility are both independent of temperature, indicating the formation of 2DEG with roughness scattering at the MgZnO/ZnO interface.

36 MATERIALS SCIENCE↗

Growth and photoresponse study of PdO nanoflakes reactive-sputter deposited on SiO{sub 2}

This study prepares PdO nanostructures on a SiO{sub 2} substrate by reactive-sputter deposition and examines photoresponse characteristics of the thin films. PdO thin films deposited at 25 deg. C is composed of bowed nanoflakes standing on the SiO{sub 2} substrate, which have a single-crystalline structure after thermal anneal at 400 deg. C. The 400 deg. C-annealed nanoflake thin film has a band gap energy in the red-light range ({approx}2.06 eV), and exhibits a very sensitive photoresponse upon the UV (365 nm) illumination. The high photoresponse sensitivity of the 400 deg. C-annealed nanoflake thin film is ascribed to a lower density of recombination centers and traps due to an excellent crystallinity and a high carrier extraction efficiency due to a low electrical resistivity. A slight decrease in the photocurrent density during the initial stage of the UV illumination is attributed to adsorption of O{sub 2}{sup -} anions on the 400 deg. C-annealed nanoflakes.

36 MATERIALS SCIENCE↗