Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Internally-heated thermal and externally-cool photovoltaic cascade solar energy system for full solar spectrum utilization

A single-stack, solar power receiver comprising both a thermal absorber layer and a photovoltaic cell layer. The stack includes an aerogel layer, that is optically transparent and thermally insulating ("OTTI"); a spectrally selective high thermal conductivity ("SSTC") thermal absorber layer; a bottom OTTI layer; and a PV cell layer. The SSTC layer includes a set of fins that substantially blocks solar radiation absorption in the band where PV cells are most sensitive. Photons with energies above or below this band block range are absorbed by the fins and the absorbed heat is conducted to pipes in the fin structure carrying a heated thermal working fluid to heat storage. Photons with energy in the band block range are reflected by the SSTC fins to the PV cell layer. The bottom OTTI aerogel layer keeps the PV cell operating near ambient temperature. The PV cell converts incident solar radiation to electrical energy.

14 SOLAR ENERGY↗

Bladed solar thermal receivers for concentrating solar power

A bladed solar thermal receiver for absorbing concentrated sunlight is disclosed. The receiver includes a plurality of panels arranged in a bladed configuration for absorbing sunlight. The bladed configurations can be radial or planar. The receiver design increases the effective solar absorptance and efficiency by providing a light trap for the incident solar radiation while reducing heat losses from radiation and convection.

14 SOLAR ENERGY↗

Solar mirrors and methods of making solar mirrors having improved properties

An article for reflecting solar energy includes a coating stack having solar reflecting films and metal oxide films, the coating stack applied on a major surface of a glass substrate, and a protective overcoat comprising a first and a second surface, wherein the first surface of the protective overcoat is disposed toward the solar reflective films and metal oxide films; and a polymer encapsulant over outer wall surfaces of the coating stack, the second surface of the protective overcoat and over peripheral edges of the coated article, the encapsulant having a base layer, a top layer and metallic corrosion-inhibitive material in the base layer.

14 SOLAR ENERGY↗

Antisolvent‐Mediated Air Quench for High‐Efficiency Air‐Processed Carbon‐Based Planar Perovskite Solar Cells

Perovskite solar cells (PSCs) have becoma a leading low‐cost photovoltaic technology, achieving power conversion efficiencies (PCEs) of up to 26.1%. However, their commercialization is hindered by stability issues and the need for controlled processing environments. Carbon‐electrode‐based PSCs (C‐PSCs) offer enhanced stability and cost‐effectiveness compared to traditional metal‐electrode PSCs, i.e., Au and Ag. However, processing challenges persist, particularly in air conditions where moisture sensitivity poses a significant hurdle. Herein, a novel air processing technique is presented for planar C‐PSCs that incorporates antisolvent vapors, such as chlorobenzene, into a controlled air‐quenching process. This method effectively mitigates moisture‐induced instability, resulting in champion PCEs exceeding 20% and robust stability under ambient conditions. The approach retains 80% of initial efficiency after 30 h of operation at maximum power point without encapsulation. This antisolvent‐mediated air‐quenching technique represents a significant advancement in the scalable production of C‐PSCs, paving the way for future large‐scale deployment.

14 SOLAR ENERGY↗

Characteristics of low-priced solar PV systems in the U.S.

Despite impressive declines in average prices, there is wide dispersion in the prices of U.S. solar photovoltaic (PV) systems; prices span more than a factor of four. What are the characteristics of the systems with low-prices? Using detailed characteristics of 42,611 small-scale (<15 kW) PV systems installed in 15 U.S. states during 2013, we identify the most important factors that make a system likely to be low-priced (LP). Comparing LP and non-LP systems, we find statistically significant differences in nearly all characteristics for which we have data. Logit and probit model results robustly indicate that LP systems are associated with: markets with few active installers; experienced installers; customer ownership; large systems; retrofits; and thin-film, low-efficiency, and Chinese modules. We also find significant differences across states, with LP systems much more likely to occur in some states, such as Arizona, New Jersey, and New Mexico, and less likely in others, such as California. Our focus on the left tail of the price distribution provides implications for policy that are distinct from recent studies of mean prices. While those studies find that PV subsidies increase mean prices, we find that subsidies also generate LP systems. PV subsidies appear to simultaneously shift and broaden the price distribution. Much of this broadening occurs in a particular location, northern California.

14 SOLAR ENERGY↗

Double Perovskite Interlayer Stabilized Highly Efficient Perovskite Solar Cells

Metal halide perovskite solar cell (PSC) technology has an impressive power conversion efficiency (PCE) exceeding 26.1% and demonstrates cost-effective manufacturing. However, the stability of these PSCs poses a significant challenge, hindering their widespread manufacturing and commercialization. To tackle the degradation issue inherent in PSCs, surface passivation techniques, particularly employing a thin layer of two-dimensional (2D) perovskites, create a 2D/3D heterostructure. Beyond this, the exploration of metal halide double perovskites adds a new dimension to the chemical and band gap phase space of materials for optoelectronic applications. In this study, we leverage a wide band gap double perovskite interlayer to enhance the stability of 3D metal halide perovskite. Specifically, the double perovskite nanoparticle Cs 2 AgBiBr 6 , with its substantial band gap of 2.2 eV and exceptional air stability, is utilized. Through optimization, a Cs 2 AgBiBr 6 -treated PSC achieves an open-circuit voltage of 1.12 V and an impressive PCE of 19.52%. Additionally, the Cs 2 AgBiBr 6 passivation layer proves to be effective in bolstering the stability of PSCs. This work demonstrates an additional strategy and design motif to simultaneously increase the PCE of PSCs along with achieving improved stability.

14 SOLAR ENERGY↗

Comparing Capacity Value Estimation Techniques for Photovoltaic Solar Power

In this paper, we estimate the capacity value of photovoltaic (PV) solar plants in the western U.S. Our results show that PV plants have capacity values that range between 52% and 93%, depending on location and sun-tracking capability. We further compare more robust but data- and computationally-intense reliability-based estimation techniques with simpler approximation methods. We show that if implemented properly, these techniques provide accurate approximations of reliability-based methods. Overall, methods that are based on the weighted capacity factor of the plant provide the most accurate estimate. We also examine the sensitivity of PV capacity value to the inclusion of sun-tracking systems.

14 SOLAR ENERGY↗

Impact of Interface Recombination on Time Resolved Photoluminescence (TRPL) Decays in CdTe Solar Cells (Numerical Simulation Analysis): Preprint

Using Sentaurus Device Software, we analyze how bulk and interface recombination affect time-resolved photoluminescence (TRPL) decays in CdTe solar cells. This modeling analysis could improve the interpretation of TRPL data and increase the possibility of rapid defect characterization in thin-film solar cells. By illuminating the samples with photons of two different wavelengths, we try to deducethe spatial origin of the dominant recombination loss. Shorter-wavelength photons will be more affected by the interface recombination and drift compared to the longer ones. Using the two-wavelength TRPL characterization method, it may be possible to determine whether a specific change in deposition process has affected the properties of interface or the bulk of the absorber.

14 SOLAR ENERGY↗

Investigation of Some Transparent Metal Oxides as Damp Heat Protective Coating for CIGS Solar Cells: Preprint

We investigated the protective effectiveness of some transparent metal oxides (TMO) on CIGS solar cell coupons against damp heat (DH) exposure at 85oC and 85% relative humidity (RH). Sputter-deposited bilayer ZnO (BZO) with up to 0.5-um Al-doped ZnO (AZO) layer and 0.2-um bilayer InZnO were used as 'inherent' part of device structure on CdS/CIGS/Mo/SLG. Sputter-deposited 0.2-um ZnSnO and atomiclayer deposited (ALD) 0.1-um Al2O3 were used as overcoat on typical BZO/CdS/CIGS/Mo/SLG solar cells. The results were all negative -- all TMO-coated CIGS cells exhibited substantial degradation in DH. Combining the optical photographs, PL and EL imaging, SEM surface micro-morphology, coupled with XRD, I-V and QE measurements, the causes of the device degradations are attributed to hydrolyticcorrosion, flaking, micro-cracking, and delamination induced by the DH moisture. Mechanical stress and decrease in crystallinity (grain size effect) could be additional degrading factors for thicker AZO grown on CdS/CIGS.

14 SOLAR ENERGY↗

Solar@Scale: A Local Government Guidebook for Improving Large-Scale Solar Development Outcomes (Third Edition)

The purpose of the Solar@Scale guidebook is to help local government practitioners—including planners, economic development professionals, local government managers, and elected and appointed officials—make decisions that improve large-scale solar development outcomes. Given the variation between state and regional contexts and priorities in the United States, the guidebook avoids a “one-size-fits-all” approach. Rather, users will need to apply the guidebook’s key points to the social, political, environmental, and economic situations in their community or the communities they serve. This guidebook contains eight related, but semi-independent, modules and each concludes with key takeaways and a list of references and links to supplemental resources.

14 SOLAR ENERGY↗

Cycle Evaluations of Reversible Chemical Reactions for Solar Thermochemical Energy Storage in Support of Concentrating Solar Power Generation Systems

The production and storage of thermochemical energy is a possible route to increase capacity factors and reduce the Levelized Cost of Electricity from concentrated solar power generation systems. In this paper, we present the results of cycle evaluations for various thermochemical cycles, including a well-documented ammonia closed-cycle along with open- and closed-cycle versions of hydrocarbon chemical reactions. Among the available reversible hydrocarbon chemical reactions, catalytic reforming-methanation cycles are considered; specifically, various methane-steam reforming cycles are compared to the ammonia cycle. In some cases, the production of an intermediate chemical, methanol, is also included with some benefit being realized. The best case, based on overall power generation efficiency and overall plant capacity factor, was found to be an open cycle including methane-steam reforming, using concentrated solar energy to increase the chemical energy content of the reacting stream, followed by combustion to generate heat for the heat engine.

10 SYNTHETIC FUELS↗

Toward a High-Efficient Utilization of Solar Radiation by Quad-Band Solar Spectral Splitting

The promising quad-band solar spectral splitter incorporates the properties of the optical filter and the spectrally selective solar thermal absorber can direct PV band to PV modules and absorb thermal band energy for thermal process with low thermal losses. Finally, it provides a new strategy for spectral splitting and offers potential ways for hybrid PVT system design.

14 SOLAR ENERGY↗

Understanding Film Formation Morphology and Orientation in High Member 2D Ruddlesden-Popper Perovskites for High-Efficiency Solar Cells

We report that 2D Ruddlesden–Popper (RP) perovskites have recently emerged as promising candidates for hybrid perovskite photovoltaic cells, realizing power-conversion efficiencies (PCEs) of over 10% with technologically relevant stability. To achieve solar cell performance comparable to the state-of-the-art 3D perovskite cells, it is highly desirable to increase the conductivity and lower the optical bandgap for enhanced near-IR region absorption by increasing the perovskite slab thickness. Here, the use of the 2D higher member (n = 5) RP perovskite (n-butyl-NH 3 ) 2 (MeNH 3 ) 4 Pb 5 I 16 in depositing highly oriented thin films from dimethylformamide/dimethylsulfoxide mixtures using the hot-casting method is reported. In addition, they exhibit superior environmental stability over thin films of their 3D counterpart. These films are assembled into high-efficiency solar cells with an open-circuit voltage of ≈1 V and PCE of up to 10%. This is achieved by fine-tuning the solvent ratio, crystal growth orientation, and grain size in the thin films. Finally, the enhanced performance of the optimized devices is ascribed to the growth of micrometer-sized grains as opposed to more typically obtained nanometer grain size and highly crystalline, densely packed microstructures with the majority of the inorganic slabs preferentially aligned out of plane to the substrate, as confirmed by X-ray diffraction and grazing-incidence wide-angle X-ray scattering mapping.

14 SOLAR ENERGY↗

Too Much of a Good Thing? Global Trends in the Curtailment of Solar PV

Solar photovoltaic (PV) systems generate electricity with no marginal costs or emissions. As a result, PV output is almost always prioritized over other fuel sources and delivered to the electric grid. However, PV curtailment is increasing as PV composes greater shares of grid capacity. In this paper, we present a novel synthesis of curtailment in four key countries: Chile, China, Germany, and the United States. We find that about 6.5 million MWh of PV output was curtailed in these countries in 2018. We find that: Policy and grid planning practices influence where, when, and how much PV is curtailed; Some PV curtailment is attributable to limited transmission capacity connecting remote solar resources to load centers; PV curtailment peaks in the spring and fall, when PV output is relatively high but electricity demand is relatively low. We discuss available measures to reduce PV curtailment as well as increasing PV curtailment in the contexts of evolving grids and energy technologies.

41 EE - Solar Energy Technologies Office (EE-4S)↗