Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Accelerated growth of calcium silicate hydrates: Experiments and simulations

Despite the usefulness of isothermal calorimetry in cement analytics, without any further computations this brings only little information on the nucleation and growth of hydrates. A model originally developed by Garrault et al. is used in this study in order to simulate hydration curves of cement obtained by calorimetry with different known hardening accelerators. The limited basis set of parameters used in this model, having a physical or chemical significance, is valuable for a better understanding of mechanisms underlying in the acceleration of C-S-H precipitation. Alite hydration in presence of four different types of hardening accelerators was investigated. It is evidenced that each accelerator type plays a specific role on one or several growth parameters and that the model may support the development of new accelerators. Those simulations supported by experimental observations enable us to follow the formation of the C-S-H layer around grains and to extract interesting information on its apparent permeability.

36 MATERIALS SCIENCE↗

Insight into elastic behavior of calcium silicate hydrated oxide (C-S-H) under pressure and composition effect

The present work relates to the study of structural and elastic properties of Tobermorite 11 A as a function of external pressure and composition in terms of calcium to silicon ratio. Basing on the lattice dynamics method, the main aim of this work is precisely to shed light, for the first time, on the high pressure structural phase transition in Tobermorite 11 A and the possible correlation with some elastic quantities. In order to check the transferability of the potentials used we have, additionally, performed a single calculation based on the density functional theory (DFT) for a pressure of 15 GPa in the case of Ca/Si = 1. The variation of the unit cell parameters with pressure indicates that Tobermorite 11 A undergoes a structural instability around 15 GPa along b-axis and around 20 GPa along a-axis which is confirmed from our calculations of X-Rays diffraction patterns at various pressure values. We have also observed the anisotropic character of the Tobermorite structure for both cases (Ca/Si = 1 and Ca/Si = 0.83). Our results show that around 20 GPa an important change appears in the elastic behaviour of Tobermorite. As pressure increases the calculated elastic quantities for Ca/Si = 1 became closer to those evaluated for Ca/Si = 0.83, which may stimulate further experimental and theoretical research on the matter.

36 MATERIALS SCIENCE↗

Preferential growth orientation of laser-patterned LiNbO{sub 3} crystals in lithium niobium silicate glass

Dots and lines consisting of LiNbO{sub 3} crystals are patterned on the surface of 1CuO-40Li{sub 2}O-32Nb{sub 2}O{sub 5}-28SiO{sub 2} (mole ratio) glass by irradiations of continuous-wave Nd:YAG laser (wavelength: {lambda}=1064 nm), diode laser ({lambda}=795 nm), and Yb:YVO{sub 4} fiber laser ({lambda}=1080 nm), and the feature of laser-patterned LiNbO{sub 3} crystal growth is examined from linearly polarized micro-Raman scattering spectrum measurements. LiNbO{sub 3} crystals with the c-axis orientation are formed at the edge parts of the surface and cross-section of dots. The growth direction of an LiNbO{sub 3} along the laser scanning direction is the c-axis. It is proposed that the profile of the temperature distribution in the laser-irradiated region and its change along laser scanning would be one of the most important conditions for the patterning of crystals with a preferential growth orientation. Laser irradiation giving a narrow width is also proposed to be one of the important factors for the patterning of LiNbO{sub 3} crystal lines with homogeneous surface morphologies. -- Graphical abstract: Polarized optical microscope observations for the surface and cross-section of the dot obtained by LD laser ({lambda}=795 nm) irradiations of P=1.4 W and t=20 s in Cu-LNS glass. Schematic model for the orientation of LiNbO{sub 3} crystals at the edge parts of the surface and cross-section of the dot is also shown. Display Omitted Research highlights: > Dots and lines with LiNbO{sub 3} crystals are patterned on the glass surface by laser irradiations. > LiNbO{sub 3} crystals with the c-axis orientation are formed at the edge parts of the surface and cross-section of dots. > The profile of the temperature distribution in the laser-irradiated region is one of the most important conditions for the patterning of highly oriented crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The solubility of titanite in silicate melt determined from growth and dissolution experiments

The solubility of titanite (CaTiSiO 5 ) in Si-rich melts was measured experimentally through growth experiments at 800–1000 °C, 0.5–1.0 GPa, log fO 2 ~ CCO–0.8, t = 72–168 h, and H 2 O = 0 to 4 wt.%, and in dissolution experiments at 925–1300 °C, 0.8 GPa, t = 18–118 h, and H 2 O = 1–10 wt.% in a piston-cylinder apparatus. Run product glasses in growth experiments were homogeneous, and iron loss suppressed ilmenite crystallization. Saturation concentrations in dissolution experiments were estimated by fitting measured diffusion profiles. Titanite solubility increases with increasing temperature and melt composition parameter \(M = {\text{ molar }}\left( {{\text{Na }} + {\text{ K }} + {\text{ 2Ca}}} \right)/\left( {{\text{Al }} \times {\text{ Si}}} \right)\) . Multiple linear regression of glass composition data from growth and dissolution experiments ( n = 29) plus 39 experiments from the LEPR database (Hirschmann et al. 2008 ) yielded the titanite solubility equation (adj. r 2 = 0.95): \(\left( {TiO_{2} } \right)^{melt} \left( {wt.\% } \right) = 0.978 \times M + 0.0048 \times T\left( K \right){-}5.90\) . This model correctly predicted undersaturation in 95% of 2344 experiments from the LEPR database that did not have titanite or rutile. Application to natural rocks yields saturation temperatures that are similar to independent temperature estimates. Finally, this equation should be useful for constraining the temperatures of titanite-saturated melts, for determining whether titanite saturation in magmatic source regions is likely, and for determining when titanite can crystallize and begin to exert an influence on melt geochemistry.

58 GEOSCIENCES↗

Transition of Blast Furnace Slag from Silicate Based to Aluminate Based: Density and Surface Tension

The effects of the Al{sub 2}O{sub 3} concentration and Al{sub 2}O{sub 3}/SiO{sub 2} ratio on the density and surface tension of molten aluminosilicate CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-9 mass pct MgO-1 mass pct TiO{sub 2} slag were investigated at temperatures from 1723 K to 1823 K (1450 °C to 1550 °C) using the Archimedean method and the maximum bubble pressure (MBP) technique, respectively. The mechanism of the changes in density and surface tension with composition was analyzed from the viewpoint of the degree of polymerization in the structure and the types of oxygen species in the melts. At a fixed CaO/SiO{sub 2} ratio of 1.20, the density decreased with increasing Al{sub 2}O{sub 3} content up to 25 mass pct, subsequently increasing. Increasing the Al{sub 2}O{sub 3}/SiO{sub 2} ratio from 0.47 to 0.92 caused an increase in the density at a fixed CaO content, and the density decreased slightly when the Al{sub 2}O{sub 3}/SiO{sub 2} ratio was greater than 0.92. Based on the structural information, the density decreased when the Al{sub 2}O{sub 3} content enhanced the network structure and increased when the (Q{sub 2} + Q{sub 3})/(Q{sub 0} + Q{sub 1}) ratio and structural complexity decreased. The surface tension increased with increasing Al{sub 2}O{sub 3} content and Al{sub 2}O{sub 3}/SiO{sub 2} ratio. On the one hand, the surface-active component of SiO{sub 2} decreased; on the other hand, the concentration of [AlO{sub 4}]{sup 5−} tetrahedra and metal cations that act as charge compensators increased at the melt surface. A model based on the anionic and cationic radii and the Butler equation was employed to predict the surface tension, and an iso-surface tension diagram was obtained at 1773 K (1500 °C).

36 MATERIALS SCIENCE↗

Fundamentals of Hydrogen Solubility in Calcium-Alumino-Silicate Molten Fluxes Containing NaF

The effect of the NaF and CaO/SiO{sub 2} ratio (mass percentage ratio) on hydrogen solubility in a CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-NaF system was studied and correlated to the structural units of the molten flux. Fourier transformed infrared, Raman, and X-ray photoelectron spectroscopy analyses were used to evaluate the structural units with NaF additions and various CaO/SiO{sub 2} ratios. At a CaO/SiO{sub 2} ratio of 0.8, the incorporated-hydroxyl dissolution mechanism is dominant, whereas the free-hydroxyl mechanism is pronounced at higher CaO/SiO{sub 2} ratio. At low NaF contents, the hydrogen solubility as a function of the CaO/SiO{sub 2} ratio showed a parabolic trend with a minimum typical of a change from incorporated- to a free-hydroxyl dissolution mechanism. The addition of network-modifying NaF depolymerizes the structural units of the flux, reducing the available sites for incorporated-hydroxyl groups. The hydrogen solubility behavior in the flux system correlates well with the structural analysis, where a high NaF content and CaO/SiO{sub 2} ratio are shown to depolymerize the complex structural units of the molten flux.

36 MATERIALS SCIENCE↗

Mapping high pH levels in hydrated calcium silicates

Data on the variability of pH levels in cement-based materials is essential for a better understanding of the early aging of materials and the long-term performance of concrete structures. Current approaches for measuring pH levels in concrete are inadequate with respect to radiometric range and resolution and spatial granularity. We report on a methodology for mapping pH levels in concrete utilizing a halochromic porphyrin sensor molecule that allows a simple measurement of surface values of pH level using a commercial digital camera setup. As proof of concept, cement paste, mortar, and concrete samples were subject to accelerated carbonation and then evaluated for pH profiles at different ages of degradation. Comparative tests on the same specimens were also conducted using phenolphthalein as the pH indicator. Spatial distribution of pH level from pH 11.0 to 13.5 was mapped at various levels of carbonation.

36 MATERIALS SCIENCE↗

Assessment of mechanical, thermal properties and crystal shapes of monoclinic tricalcium silicate from atomistic simulations

The two most common polymorphs in industrial alite, M1 and M3, were characterized at the molecular scale. Different methods were employed and discussed to assess mechanical properties and specific heat of both polymorphs. The calculated homogenized elastic moduli and specific heat were found in good agreement with experimental measurements. A comparative analysis of spacial Youngs modulus reveal isotropic and anisotropic spacial distribution for M{sub 1} and M{sub 3} respectively. A more isotropic compressive strength is also reported for M{sub 1} when compared to M{sub 3} polymorph. Cleavage energies computation allowed to proposed equilibrium shapes for both polymorph, with significant differences. While the lowest cleavage energies were found along (100) and (001) for both polymorphs, the constructed M1 crystal possesses 3 independent facets, against seven for the M3 polymorph.

36 MATERIALS SCIENCE↗

Local structure and Ca/Si ratio in C-S-H gels from hydration of blends of tricalcium silicate and silica fume

At the microscale, C-S-H gels from alite, or neat Portland cements, has a Ca/Si ratio close to 1.80. At the nanoscale, C-S-H is described by a defective tobermorite structure which allows a maximum Ca/Si ratio close to 1.40. There is no agreement in the location of the extra 0.40 mol of Ca(OH){sub 2} at the nanoscale. Atomistic modelling studies reported Ca(OH){sub 2} species within the tobermorite interlayer space. Other works point toward a fine intermixing of defective tobermorite and nanoportlandite. Here, we have prepared a series of alite blended with silica fume and studied the pastes by several techniques including synchrotron pair distribution function (PDF). In the employed conditions, the C-S-H gel formed by the pozzolanic reaction has nearly the same local structure than the primary C-S-H gel. Furthermore, differential PDF points toward Ca(OH){sub 2} excess having a local structure compatible with few-layer thick nanoparticles stretched along the c-axis.

36 MATERIALS SCIENCE↗

Nitrogen diffusion in silicate minerals, with implications for nitrogen transport and cycling in the lithosphere

Diffusion laws for nitrogen in orthoclase, quartz, olivine and clinopyroxene were determined using a combination of experimental strategies that included: in-diffusion from C-H-O-N vapor; in-diffusion from molten NH 4 Cl; and ion implantation followed by heating to mobilize N. Most experiments were conducted at pressures near 1 bar, but seven experiments were also run in a piston-cylinder device at P total = 1 GPa. The C-H-O-N-source experiments were “wet” (H 2 O present); those on ion-implanted samples were dry. All N sources were highly enriched in 15 N to avoid spurious 14 N signals resulting from surface contamination. Use of 15 N also enabled depth profiling by nuclear reaction analysis (NRA) using the 15 N(p,αγ) 12 C reaction, which has a detection limit of ~10 ppm. Nitrogen profiles in three samples were characterized by both NRA and SIMS, with similar results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual-shell silicate and alumina coating for long lasting and high capacity lithium ion batteries

In this work we demonstrate a theory-driven, novel dual-shell coating system of Li 2 SrSiO 4 and Al 2 O 3 , achieved via a facile and scalable sol-gel technique on LiCoO 2 electrode particles. The optimal thickness of each coating can lead to increased specific capacity (~185 mAh/g at 0.5 C-rate) at a cut-off potential of 4.5 V, and greater cycling stability at very high C rates (up to 10 C) in half-cells with lithium metal. The mechanism of this superior performance was investigated using a combination of X-ray and electron characterization methods. It shows that the results of this investigation can inform future studies to identify still better dual-shell coating schemes, achieved by such industrially feasible techniques, for application on similar, nickel-rich cathode materials.

25 ENERGY STORAGE↗

Densification of non-radioactive porous siliceous particles loaded with cesium potassium copper hexacyanoferrate by spark plasma sintering

In the development of a conditioning process for cesium-bearing sorbents from the decontamination of aqueous waste streams, the treatment of a granular material composed of (Cs,K) 2 CuFe(CN) 6 loaded onto mesoporous silica particles has been investigated in an additive-free two-step conditioning process involving (i) calcination at 1000 °C to remove volatile species and (ii) densification by spark plasma sintering. A 92.0 % dense pellet was obtained after 10 min sintering at 850 °C under 100 MPa. Density and microstructural measurements indicate that densification is first driven by the viscous flow of a vitreous phase containing Cs, formed during calcination. Additionally, the density of the sample then increases further during sintering by grain boundary diffusion. However, a limited but non negligible part of cesium is lost during densification.

36 MATERIALS SCIENCE↗

Crystal structure of Na{sub 2}MMgP{sub 2}O{sub 8} (M: Ba, Sr, Ca) orthophosphates and their luminescence properties activated by Eu{sup 2+}; analogous structural behaviors of glaserite-type phosphates and silicates

Rietveld refinements of X-ray powder diffraction data and vibrational spectroscopy have confirmed the crystal structure of Na{sub 2}MMgP{sub 2}O{sub 8} (M: Ba, Sr, Ca) prepared by a standard solid state reaction. They have glaserite-type layered structure. Na{sub 2}MMgP{sub 2}O{sub 8} has a trigonal P3-bar form for M=Ba, and monoclinic P2{sub 1}/c forms for M=Sr and Ca. The observed structural transition is analogous to the corresponding layered orthosilicate M{sub 3}MgSi{sub 2}O{sub 8}. Eu{sup 2+}-doped Na{sub 2}MMgP{sub 2}O{sub 8} exhibits an intense blue to violet emission under ultraviolet excitation, based on 5d-4f electron transition of Eu{sup 2+} ions. The emission character is very sensitive to the structural transition induced by M{sup 2+} and the subsequent site symmetry changes. - Graphical abstract: Emission properties of Na{sub 2}MMgP{sub 2}O{sub 8} (M: Ba, Sr, Ca) are discussed from the viewpoint of the crystal structure solved by X-ray powder diffraction technique. Highlights: Black-Right-Pointing-Pointer Glaserite-type Na{sub 2}MMgP{sub 2}O{sub 8} (M: Ba, Sr, Ca) has been prepared by a solid state reaction. Black-Right-Pointing-Pointer Crystal system of Na{sub 2}MMgP{sub 2}O{sub 8} changes, depending on M{sup 2+} size. Black-Right-Pointing-Pointer Eu{sup 2+}-doped Na{sub 2}MMgP{sub 2}O{sub 8} exhibits blue to violet emission under ultraviolet irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal expansion of lanthanum silicate oxyapatite (La{sub 9.33+2x}(SiO{sub 4}){sub 6}O{sub 2+3x}), lanthanum oxyorthosilicate (La{sub 2}SiO{sub 5}) and lanthanum sorosilicate (La{sub 2}Si{sub 2}O{sub 7})

Four types of powder specimens of La{sub 9.33}(SiO{sub 4}){sub 6}O{sub 2} (space group P6{sub 3}/m and Z=1), La{sub 9.33+2x}(SiO{sub 4}){sub 6}O{sub 2+3x} with 0.06{<=}x{<=}0.13 (P6{sub 3}/m and Z=1), La{sub 2}SiO{sub 5} (P2{sub 1}/c and Z=4) and La{sub 2}Si{sub 2}O{sub 7} (P2{sub 1}/c and Z=4) were examined by high-temperature X-ray powder diffractometry to determine the changes in unit-cell dimensions up to 1473 K. The anisotropy of thermal expansion was demonstrated for the former two crystals to clarify the thermal behaviors of the highly c-axis-oriented polycrystals. With La{sub 9.33}(SiO{sub 4}){sub 6}O{sub 2}, the linear expansion coefficient of the a-axis ({alpha}{sub a}) was 4.8 Multiplication-Sign 10{sup -6} K{sup -1} and that of the c-axis ({alpha}{sub c}) was 1.8 Multiplication-Sign 10{sup -6} K{sup -1} in the temperature range from 298 to 1473 K. The {alpha}{sub a}- and {alpha}{sub c}-values of La{sub 9.33+2x}(SiO{sub 4}){sub 6}O{sub 2+3x} (0.06{<=}x{<=}0.13) were, respectively, 5.9 Multiplication-Sign 10{sup -6} K{sup -1} and 2.3 Multiplication-Sign 10{sup -6} K{sup -1}. The coefficients of mean linear thermal expansion were 4.9 Multiplication-Sign 10{sup -6} K{sup -1} for La{sub 2}SiO{sub 5} and 6.0 Multiplication-Sign 10{sup -6} K{sup -1} for La{sub 2}Si{sub 2}O{sub 7}, which describe the thermal expansion behaviors of the randomly grain-oriented polycrystalline materials. - Graphical abstarct: Temperature dependence of the coefficients of thermal expansion (CTE). The linear CTE along the a-axes for La{sub 9.33}(SiO{sub 4}){sub 6}O{sub 2} and La{sub 9.33+2x}(SiO{sub 4}){sub 6}O{sub 2+3x} with 0.06{<=}x{<=}0.13. The mean linear CTE for La{sub 2}SiO{sub 5} and La{sub 2}Si{sub 2}O{sub 7}. Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of La{sub 9.33+2x}(SiO{sub 4}){sub 6}O{sub 2+3x} (x=0 and 0.06{<=}x{<=}0.13), La{sub 2}SiO{sub 5} and La{sub 2}Si{sub 2}O{sub 7} Black-Right-Pointing-Pointer Unit-cell dimensions were determined up to 1473 K by high-temperature X-ray diffraction Black-Right-Pointing-Pointer Anisotropic expansion was clarified for La{sub 9.33+2x}(SiO{sub 4}){sub 6}O{sub 2+3x} (x=0 and 0.06{<=}x{<=}0.13) Black-Right-Pointing-Pointer Mean linear thermal expansion was determined for La{sub 2}SiO{sub 5} and La{sub 2}Si{sub 2}O{sub 7.}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of retrapping on the persistent luminescence in strontium silicate orange–yellow phosphor

The orange–yellow long persistent luminescence in Sr{sub 3}SiO{sub 5}:Eu{sup 2+}, Er{sup 3+} with the chromaticity coordination of (0.48, 0.49) can persist for over 20 h above the recognizable intensity level (≥0.32 mcd/m{sup 2}) because of retrapping carriers by the deep traps. The incorporation of Er{sup 3+} into Sr{sub 3}SiO{sub 5}:Eu{sup 2+} generates a large number of shallow traps responsible for the fast decay component as well as deep traps responsible for the decay tail of the LPL. It demonstrates that the retrapping of the carrier released from a trap plays an important role in the persistent luminescence process. - Graphical abstract: LPL decay curves of Sr{sub 3−x−y}SiO{sub 5}:xEu{sup 2+}, yEr{sup 3+} (x=0.0025, y=0, 0.0025). Inset: Orange–yellow emission images recorded using a classic Reflex digital camera with exposure times varying with the persistent luminescence times. Display Omitted - Highlights: • The persistence time of Sr{sub 3}SiO{sub 5}:Eu{sup 2+}, Er{sup 3+} lasts over 20 h above the recognizable intensity level. • The incorporation of Er{sup 3+} into Sr{sub 3}SiO{sub 5}:Eu{sup 2+} generates a large number of shallow traps. • The experimental results provide an evidence for the retrapping process in LPL processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗