Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Return”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Advanced propulsion for the Mars Rover Sample Return Mission

The present evaluation of highly detailed advanced propulsion system design concepts for the Mars Rover Sample Return Mission proceeded by comparing a baseline chemical propulsion option with both storable and cryogenic advanced chemical propulsion alternatives and solar- and nuclear-based electric propulsion OTVs. Substantial launch mass reductions and commensurate payload mass increases were obtainable with both advanced chemical and electric propulsion cycles.

Palaszewski, Bryan↗
NASA NTRS1988

Trajectory design for a Mars Rover/Sample Return mission

This paper discusses two of the orbit design problems faced in the design of a Mars Rover/Sample Return mission, which is currently being studied at the Jet Propulsion Laboratory. The first is the problem of interplanetary transfer - what is the best trajectory for getting equipment to Mars and a sample back. Several kinds of trajectories are examined before the conclusion is made that straightforward direct transfers are best. The second orbit design problem is what kind of orbit around Mars is best for making high-resolution maps of sites where the rover could land and gather samples, and how can the same orbiter be used as a relay between a rover on Mars and ground stations on Earth. This question is examined in the context of alternate mission options being considered, and the answer depends on the requirements of the particular mission option.

Sweetser, Theodore H.↗
NASA NTRS1988

Orbit/deorbit analysis for the Mars rover sample return mission

Four astrodynamic problems involved in a combined Mars rover and surface sample return mission projected for the early 1990s are explored. Two of the problems are associated with the satisfaction of the specific mission requirements at Mars, calling for the initial orbit entered into at Mars to be highly eccentric and to have a very low periapsis altitude (about 250 km). The problem of placing an areosynchronous communications satellite in orbit around Mars is then discussed. Finally, the problem of deorbiting to a specified landing site from a highly eccentric orbit is considered.

Penzo, Paul A.↗
NASA NTRS1988

Spray characteristics of a spill-return airblast atomizer

The spray characteristics of a spill-return airblast atomizer are examined using water as the working fluid. Measurements of mean drop size, drop size distribution, spray cone angle, and circumferential liquid distinction, are carried out over wide ranges of liquid injection pressures and atomizing air velocities. Generally, it is found that an increase in nozzle bypass ratio worsens the atomization quality and widens the spray cone angle. Increase in airblast air velocity may improve or impair atomization quality depending on whether it increases or decreases the relative velocity between the liquid and the surrounding air. Airblast air can also be used to modify the change in spray cone angle that normally accompanies a change in bypass ratio.

Dai, X. F.↗
NASA NTRS1988

STS-26: The return to flight

The major activities leading up to the return to flight of the Space Shuttles are summarized. Major orbiter modifications and solid rocket motor redesign are described. Shuttle payloads are discussed briefly. Also provided are the biographies of the crew.

Source record↗
NASA NTRS1988

Mars sample return mission: What level of complexity

The complexity of the U.S. Sample Return Mission is ultimately dependent on current mission funding and the projected direction of the U.S. space program. Despite these uncertainties, it is important to examine mission scenarios to address desired scientific objectives that can be summarized in the following list: (1) determine existence of climatic records in geologic records; (2) does Mars have a subpermafrost groundwater system; (3) fundamental questions on the existence of Mars biology; (4) what is the internal structure of Mars; (5) determine the systems for regolith formation; and (6) what is the contribution of meteorites to Martian geology and climate are presented. To address these objectives, the sample size, quantity and location must be established and whether this should be the only data searched for on the Martian surface. With this in mind, three mission scenarios are briefly discussed, in order of increasing complexity.

Ciesla, Thomas M.↗
NASA NTRS1988

Chemical interactions between the present-day Martian atmosphere and surface minerals: Implications for sample return

Thermochemical and photochemical reactions between surface minerals and present-day atmospheric constituents are predicted to produce microscopic effects on the surface of mineral grains. Relevant reactions hypothesized in the literature include conversions of silicates and volcanic glasses to clay minerals, conversion of ferrous to ferric compounds, and formation of carbonates, nitrates, and sulfates. These types of surface-atmosphere weathering of minerals, biological potential of the surface environment, and atmospheric stability in both present and past Martian epochs. It is emphasized that the product of these reactions will be observable and interpretable on the microscopic surface layers of Martian surface rocks using modern techniques with obvious implications for sample return from Mars. Macroscopic products of chemical weathering reactions in past Martian epochs are also expected in Martian surface materials. These products are expected not only as a result of reactions similar to those proceeding today but also due to aqueous reactions in past epochs in which liquid water was putatively present. It may prove very difficult or impossible, however, to determine definitively from the relic macroscopic product alone either the exact weathering process which led to its formation of the identity of its weathering parent mineral. The enormous advantages of studying the Martian chemical weathering by investigating the microscopic products of present-day chemical reactions on sample surfaces are very apparent.

Prinn, Ronald↗
NASA NTRS1988

The role of impact cratering for Mars sample return

The preserved cratering record of Mars indicates that impacts play an important role in deciphering Martian geologic history, whether as a mechanism to modify the lithosphere and atmosphere or as a tool to sample the planet. The various roles of impact cratering in adding a broader understanding of Mars through returned samples are examined. Five broad roles include impact craters as: (1) a process in response to a different planetary localizer environment; (2) a probe for excavating crustal/mantle materials; (3) a possible localizer of magmatic and hydrothermal processes; (4) a chronicle of changes in the volcanic, sedimentary, atmospheric, and cosmic flux history; and (5) a chronometer for extending the geologic time scale to unsampled regions. The evidence for Earth-like processes and very nonlunar styles of volcanism and tectonism may shift the emphasis of a sampling strategy away from equally fundamental issues including crustal composition, unit ages, and climate history. Impact cratering not only played an important active role in the early Martian geologic history, it also provides an important tool for addressing such issues.

Schultz, P. H.↗
NASA NTRS1988

Mars sample return: Recommended sites

Site selection priorities for a Mars sample return are constrained by the risks due to terrain that affect the successful descent and mobility of the sampling vehicle. At this time, evaluations of terrain roughness can be made only in a very general way. For this reason, the two candidate sites discussed are provisionally recommended primarily on the basis of their scientific value; however, no adverse surface conditions are discernable at these locations at the resolution of Viking images. The rationale is given for the selection of the sites.

Scott, D. H.↗
NASA NTRS1988

Sample selection and preservation techniques for the Mars sample return mission

It is proposed that a miniaturized electron spin resonance (ESR) spectrometer be developed as an effective, nondestructivew sample selection and characterization instrument for the Mars Rover Sample Return mission. The ESR instrument can meet rover science payload requirements and yet has the capability and versatility to perform the following in situ Martian sample analyses: (1) detection of active oxygen species, and characterization of Martian surface chemistry and photocatalytic oxidation processes; (2) determination of paramagnetic Fe(3+) in clay silicate minerals, Mn(2+) in carbonates, and ferromagnetic centers of magnetite, maghemite and hematite; (3) search for organic compounds in the form of free radicals in subsoil, and detection of Martian fossil organic matter likely to be associated with carbonate and other sedimentary deposits. The proposed instrument is further detailed.

Tsay, Fun-Dow↗
NASA NTRS1988

In situ XRF and gamma ray spectrometer for Mars sample return mission

A combined in situ X-ray fluorescence (XRF) and passive gamma ray spectrometer instrument is proposed for the chemical elemental analysis of various Martian surfaces and samples. The combined instrument can be carried on board a rover. The passive gamma ray or the neutron excited gamma ray system would be used to determine the elemental composition of the Martian surface while the rover is in motion. The XRF system would be used to perform analysis either on the Martian surface or on collected samples when the rover is stationary. The latter function is important both in cataloging the collected samples and in the selection of samples to be returned to earth. For both systems, data accumulation time would be on the order of 30 minutes. No sample preparation would be necessary.

Lo, I. Yin↗
NASA NTRS1989

Preliminary assessment of rover power systems for the Mars Rover Sample Return Mission

Four isotope power system concepts were presented and compared on a common basis for application to on-board electrical prime power for an autonomous planetary rover vehicle. A representative design point corresponding to the Mars Rover Sample Return (MRSR) preliminary mission requirements (500 W) was selected for comparison purposes. All systems concepts utilize the General Purpose Heat Source (GPHS) isotope heat source developed by DOE. Two of the concepts employ thermoelectric (TE) conversion: one using the GPHS Radioisotope Thermoelectric Generator (RTG) used as a reference case, the other using an advanced RTG with improved thermoelectric materials. The other two concepts employed are dynamic isotope power systems (DIPS): one using a closed Brayton cycle (CBC) turboalternator, and the other using a free piston Stirling cycle engine/linear alternator (FPSE) with integrated heat source/heater head. Near term technology levels have been assumed for concept characterization using component technology figure-of-merit values taken from the published literature. For example, the CBC characterization draws from the historical test database accumulated from space Brayton cycle subsystems and components from the NASA B engine through the mini-Brayton rotating unit. TE system performance is estimated from Voyager/multihundred Watt (MHW)-RTG flight experience through Mod-RTG performance estimates considering recent advances in TE materials under the DOD/DOE/NASA SP-100 and NASA Committee on Scientific and Technological Information programs. The Stirling DIPS system is characterized from scaled-down Space Power Demonstrator Engine (SPDE) data using the GPHS directly incorporated into the heater head. The characterization/comparison results presented here differ from previous comparison of isotope power (made for Low Earth Orbit (LEO) applications) because of the elevated background temperature on the Martian surface compared to LEO, and the higher sensitivity of dynamic systems to elevated sink temperature. The mass advantage of dynamic systems is significantly reduced for this application due to Mars' elevated background temperature.

Bents, David J.↗
NASA NTRS1988

Mars Rover/Sample Return landing strategy

This paper describes the analysis and results of an investigation of the Mars Rover/Sample Return mission's landing strategy, together with the trade-offs of different landing strategies. The percentile points and the descriptive statistics of the probability distribution of traverse distances are calculated using a simple model formulated on the basis of landing error characteristics. The results show that variations in the landing stratgegy can significantly affect the traverse distance requirements, which range from 20 to 200 km.

Friedlander, Alan L.↗
NASA NTRS1988

Mars sample return - Science

The possible scientific goals of a Mars sample return mission are reviewed, including the value of samples and the selection of sampling sites. The fundamental questions about Mars which could be studied using samples are examined, including planetary formation, differentiation, volcanism and petrogenesis, weathering, and erosion. Scenarios are presented for sample acquisition and analysis. Possible sampling methods and tools are discussed, including drilling techniques, types of rovers, and processing instruments. In addition, the possibility of aerocapture out of elliptical or circular orbit is considered.

Blanchard, Douglas P.↗
NASA NTRS1988

Mars rover sample return missions

An important intermediate step in the path to human exploration of Mars is the accomplishment of a mission which lands an unmanned rover on the Martian surface, selects and collects various samples of the terrain and atmosphere, and returns them to earth for analysis. Such a mission is being developed under the management of NASA's JPL and the Johnson Space Center. The concepts for a wide range of rover capabilities are studied and an assessment of the driving technological developments required to implement these capabilities is made.

Cunningham, Glenn E.↗
NASA NTRS1989

Mars Rover Sample Return Orbiter design concepts

The observational orbiter of the Mars Rover Sample Return mission will observe the (10x10 km) landing sites and provide data that will be used in the decision to commit the landing vehicles to a landing at a chosen site. To provide observational data from orbit at a surface resolution consistent with the hazard tolerance of the landing vehicles, the orbiter imaging subsystem must be capable of 0.25 meters resolution per picture element (pixel). The design of the imaging, pointing, and data subsystems capable of providing this capability has been completed in this study. The rationale for these requirements and the more detailed derived requirements affecting the spacecraft design are discussed.

Randolph, J. E.↗