Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REGENERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Evaluating the energy performance of a hybrid membrane-solvent process for flue gas carbon dioxide capture

In this study, a particularly energy intensive step in the conventional amine absorption process to remove carbon dioxide is solvent regeneration using a steam stripping column. An attractive alternative to reduce the energy requirement is gas pressurized stripping, in which a high pressure noncondensable gas is used to strip CO 2 off the rich solvent stream. The gas pressurized stripping column product, having CO 2 at high concentration and high partial pressure, can then be regenerated readily using membrane separation. In this study, we performed an energetic analysis in the form of total equivalent work and found that, for capturing CO 2 from flue gas, this hybrid stripping process consumes 49% less energy compared to the base case conventional MEA absorption/steam stripping process. We also found the amount of membrane required in this process is much less than required for direct CO 2 capture from the flue gas: approximately 100-fold less than a previously published two-stage cross-flow scheme, mostly due to the more favorable pressure ratio and CO 2 concentration. There does exist a trade-off between energy consumption and required membrane area that is most strongly affected by the gas pressurized stripper operating pressure. While initial analysis looks promising from both an energy requirement and membrane unit capital cost, the viability of this hybrid process depends on the availability of advanced, next generation gas separation membranes to perform the stripping gas regeneration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of Fluoroethylene Carbonate Additives on the Initial Formation of the Solid Electrolyte Interphase on an Oxygen-Functionalized Graphitic Anode in Lithium-Ion Batteries

The formation of a solid electrolyte interphase (SEI) at the electrode/electrolyte interface substantially affects the stability and lifetime of lithium-ion batteries (LIBs). One of the methods to improve the lifetime of LIBs is by the inclusion of additive molecules to stabilize the SEI. To understand the effect of additive molecules on the initial stage of SEI formation, in this work we compare the decomposition and oligomerization reactions of a fluoroethylene carbonate (FEC) additive on a range of oxygen-functionalized graphitic anodes to those of an ethylene carbonate (EC) organic electrolyte. A series of density functional theory (DFT) calculations augmented by ab initio molecular dynamics (AIMD) simulations reveal that EC decomposition on an oxygen-functionalized graphitic ($11\bar{2}0$) edge facet through a nucleophilic attack on an ethylene carbon site (C E ) of an EC molecule (S2 mechanism) is spontaneous during the initial charging process of LIBs. However, decomposition of EC through a nucleophilic attack on a carbonyl carbon (C C ) site (S1 mechanism) results in alkoxide species regeneration that is responsible for continual oligomerization along the graphitic surface. In contrast, FEC prefers to decompose through an S1 pathway, which does not promote alkoxide regeneration. Including FEC as an additive is thus able to suppress alkoxide regeneration and results in a smaller and thinner SEI layer that is more flexible toward lithium intercalation during the charging/discharging process. In addition, we find that the presence of different oxygen functional groups at the surface of graphite dictates the oligomerization products and the LiF formation mechanism in the SEI.

25 ENERGY STORAGE↗

Dynamic Tracking of NiFe Smart Catalysts using In Situ X-Ray Absorption Spectroscopy for the Dry Methane Reforming Reaction

The exsolution of nanoparticles from perovskite precursors has been explored as a route to synthesize catalysts with sinter or coke resistance. The characteristics of these exsolved nanoparticles are highly dynamic depending on the redox nature of the environment to which they are subjected. To develop their properties for thermo- and electrocatalytic applications, it is necessary to track the states and behavior of exsolved catalysts with in situ and ex situ characterization. In this study, we conduct in situ X-ray absorption spectroscopy (XAS) along with ex situ scanning transmission electron microscopy high-angle annular dark-field (STEM-HAADF) and energy-dispersive X-ray spectroscopy analysis of the parent perovskite oxide precursor, LaFe 0.8 Ni 0.2 O 3 , as its structure forms bimetallic NiFe nanoparticles and evolves in oxidative, reductive, and dry methane reforming environments. We develop a theory that NiFe exsolution is a function of the reduction potential where LaFe 0.8 Ni 0.2 O 3 transforms to NiFe alloy supported on LaO x -LaFeO x . The Ni starts to exsolve at 268 °C, while most Fe exsolves at 700 °C. During dry methane reforming conditions, most of the Fe is oxidized by CO 2 during the reaction and re-enters the perovskite as LaFeO 3 , while Ni remains on the surface as nanoparticles in the metallic state. During the oxidative regeneration phase, most of the Fe re-enters the bulk perovskite phase, while Ni is partially regenerated with a small percentage oxidized to large NiO nanoparticles. Finally, this study sheds light on the exsolution and regeneration of bimetallic alloy nanoparticles and the influence of the reaction conditions on their catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advantages of MgAlOx over gamma-Al2O3 as a support material for potassium-based high temperature lean NOx traps

MgAlOx mixed oxides were employed as supports for potassium-based lean NOx traps (LNTs) targeted for high temperature applications. Effects of support compositions, K/Pt loadings, thermal aging and catalyst regeneration on NOx storage capacity were systematically investigated. The catalysts were characterized by XRD, NOx-TPD, TEM, STEM-HAADF and in-situ XAFS. The results indicate that MgAlOx mixed oxides have significant advantages over conventional gamma-Al2O3-supports for LNT catalysts, in terms of high temperature NOx trapping capacity and thermal stability. First, as a basic support, MgAlOx stabilizes stored nitrates (in the form of KNO3) to much higher temperatures than mildly acidic gamma-Al2O3. Second, MgAlOx minimizes Pt sintering during thermal aging, which is not possible for gamma-Al2O3 supports. Notably, combined XRD, in-situ XAFS and STEM-HAADF results indicate that Pt species in the thermally aged Pt/MgAlOx samples are finely dispersed in the oxide matrix as isolated atoms. This strong metal-support interaction stabilizes Pt and minimizes the extent of sintering. However, such strong interactions result in Pt oxidation via coordination with the support so that NO oxidation activity can be adversely affected after aging which, in turn, decreases NOx trapping ability for these catalysts. Interestingly, a high-temperature reduction treatment regenerates essentially full NOx trapping performance. In fact, regenerated Pt/K/MgAlOx catalyst exhibits much better NOx trapping performance than fresh Pt/K/Al2O3 LNTs over the entire temperature range investigated here. In addition to thermal aging, Pt/K loading effects were systemically studied over the fresh samples. The results indicate that NOx trapping is kinetically limited at low temperatures, while thermodynamically limited at high temperatures. A simple conceptual model was developed to explain the Pt and K loading effects on NOx storage. An optimized K loading, which allows balancing between the stability of nitrates and exposed Pt surface, gives the best NOx trapping capability.

Environmental Molecular Sciences Laboratory↗

Co(salen)-Catalyzed Oxidation of Lignin Models to Form Benzoquinones and Benzaldehydes: A Computational and Experimental Study

Lignin is a highly abundant polyphenolic polymer that imparts mechanical strength to plant biomass. Transition-metal complexes can catalyze lignin oxidation to produce value-added products, but low catalytic efficiency has hampered their use in industry. Identifying the chemical and structural factors that govern catalytic activity is a prerequisite to rational design of catalysts with improved activity. In this study, we combine computational and experimental approaches to investigate the mechanism of Co(salen)-catalyzed oxidation of the monomeric lignin models syringyl (S), vanillyl (G), and 4-hydroxybenzyl alcohol (H) to produce benzoquinone and benzaldehyde products. Experimentally, S oxidation to form dimethoxybenzoquinone proceeded efficiently with a Co(salen) catalyst coordinated by a pyridine ligand, but G and H did not undergo oxidation. Density functional theory calculations reveal that catalyst regeneration is energetically unfavorable in the presence of H, which prevents oxidation. In contrast, S readily facilitates catalyst regeneration. Formation of methoxybenzoquinone from G was achieved experimentally by adding bulky, noncoordinating bases. These findings provide a fundamental baseline for enhancing the activity of Co-Schiff base catalysts toward lignin-like molecules by adding sterically hindered nitrogenous bases or potentially by including a cocatalyst that promotes catalyst regeneration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress toward Biomass and Coal-Derived Syngas Warm Cleanup: Proof-of-Concept Process Demonstration of Multicontaminant Removal for Biomass Application

Systems comprising of multiple sorbent and catalytic beds have been developed for the warm syngas cleanup of coal- and biomass-derived syngas. Tailored specifically for biomass application the process described here consists of six primary unit operations: 1) Na2CO3 bed for HCl removal, 2) two regenerable ZnO beds for bulk H2S removal, 3) ZnO bed for H2S polishing, 4) NiCu/SBA-16 sorbent for trace metal (e.g. AsH3) removal, 5) steam reforming catalyst bed for tars and light hydrocarbons reformation and NH3 decomposition, and a 6) Cu-based LT-WGS catalyst bed. Simulated biomass-derived syngas containing a multitude of inorganic contaminants (H2S, AsH3, HCl, and NH3) and hydrocarbon additives (methane, ethylene, benzene, and naphthalene) was used to demonstrate process effectiveness. The efficiency of the process was demonstrated for a period of 175 hours, during which no signs of deactivation were observed. Post-run analysis revealed small levels of sulfur slipped through the sorbent bed train to the two downstream catalytic beds. Future improvements could be made to the trace metal polishing sorbent to ensure complete inorganic contaminant removal (to low ppb level) prior to the catalytic steps. However, dual, regenerating ZnO beds were effective for continuous removal for the vast majority of the sulfur present in the feed gas. The process was effective for complete AsH3 and HCl removal. The steam reforming catalyst completely reformed all the hydrocarbons present in the feed (methane, ethylene, benzene, and naphthalene) to additional syngas. However, post-run evaluation, under kinetically-controlled conditions, indicates deactivation of the steam reforming catalyst. Spent material characterization suggests this is attributed, in part, to coke formation, likely due to the presence of benzene and/or naphthalene in the feed. Future adaptation of this technology may require dual, regenerable steam reformers. The process and materials described in this report hold promise for a warm cleanup of a variety of contaminant species within warm syngas.

Environmental Molecular Sciences Laboratory↗

Sorbent Mediated Electrocatalytic Reduction of Dilute CO 2 to Methane

Efficient CO 2 utilization is a critical component of closing the anthropogenic carbon cycle. Most studies have focused on the use of pure streams of CO 2 . However, CO 2 is generally available only in dilute streams, which requires capture by sorbents followed by energy-intensive regeneration to release concentrated CO 2 . Direct utilization of sorbed-CO 2 avoids the costly regeneration step, and the sorbent-CO 2 interaction can kinetically activate CO 2 to tune its reactivity toward products that could otherwise be inaccessible with direct CO 2 reduction. We demonstrate that an N-heterocyclic carbene, 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (DPIy), quantitatively reacts with CO 2 from dilute streams (0.04 and 10%) to form the sorbent-CO 2 substrate 1,3-bis(2,6-diisopropylphenyl)imidazolium-2-carboxylate (DPICx). Electrocatalyst iron tetraphenylporphyrin chloride (Fe(TPP)Cl) typically reduces CO 2 to CO; however, with DPICx as the substrate, the eight-electron reduced product methane (CH 4 ) is produced with a high Faradaic efficiency (>85%) and regeneration of the sorbent DPIy. In addition to the overall energy and capital advantages of integrated CO 2 capture and conversion, this result illustrates how sorbents can serve a dual purpose for both CO 2 capture and chemical auxiliary purposes to access unique products. CO 2 has a spectrum of reactivity with different types of sorbents; thus, these studies demonstrate how sorbent-CO 2 interactions can be leveraged for integrated capture and utilization platforms to access a wider range of CO 2 -derived products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ electrochemical recomposition of decomposed redox-active species in aqueous organic flow batteries

Aqueous organic redox flow batteries (AORFBs) offer a safe and potentially inexpensive solution to the problem of storing massive amounts of electricity produced from intermittent renewables. However, molecular decomposition is the major barrier preventing AORFBs from being commercialized. Structural modifications can improve molecular stability at the expense of increased synthetic cost and molecular weight. Utilizing 2,6-dihydroxy-anthraquinone (DHAQ), without further structural modification, we demonstrate that electrochemical regeneration could be a viable route to achieve low-cost, long-lifetime AORFBs. In situ (online) NMR and EPR and complementary electrochemical analyses reveal that decomposition compounds i.e., 2,6-dihydroxy-anthrone (DHA) and its tautomer, 2,6-dihydroxy-anthranol (DHAL), can be converted back to DHAQ in two steps: first DHA(L) 2- are oxidized to the dimer (DHA) 2 4- at - 0.32 V vs. SHE by one-electron transfer; subsequently, the (DHA) 2 4- is oxidized to DHAQ 2- at +0.57 V vs. SHE by three-electron transfer. Electrochemical regeneration rejuvenates not only DHAQ 2- , but also the positive electrolyte – rebalancing the states of charge of both electrolytes without introducing extra ions. We demonstrate the repeated capacity recovery with DHAQ | potassium ferro-/ferricyanide flow battery in basic conditions, and show the approach is also effective for anthraquinone-2,7-disulfonate in acid. Electrochemical regeneration strategies may extend the useful lifetime of many water-soluble organic molecules with anthraquinone core structures in electrochemical cells.

25 ENERGY STORAGE↗

Capturing carbon dioxide from air with charged-sorbents

Emissions reduction and greenhouse gas removal from the atmosphere are both necessary to achieve net-zero emissions and limit climate change. There is thus a need for improved sorbents for the capture of carbon dioxide from the atmosphere, a process known as direct air capture. In particular, low-cost materials that can be regenerated at low temperatures would overcome the limitations of current technologies. In this work, we introduce a new class of designer sorbent materials known as ‘charged-sorbents’. These materials are prepared through a battery-like charging process that accumulates ions in the pores of low-cost activated carbons, with the inserted ions then serving as sites for carbon dioxide adsorption. We use our charging process to accumulate reactive hydroxide ions in the pores of a carbon electrode, and find that the resulting sorbent material can rapidly capture carbon dioxide from ambient air by means of (bi)carbonate formation. Unlike traditional bulk carbonates, charged-sorbent regeneration can be achieved at low temperatures (90–100 °C) and the sorbent’s conductive nature permits direct Joule heating regeneration using renewable electricity. Given their highly tailorable pore environments and low cost, we anticipate that charged-sorbents will find numerous potential applications in chemical separations, catalysis and beyond.

54 ENVIRONMENTAL SCIENCES↗

Analysis of bipolar membranes for electrochemical CO 2 capture from air and oceanwater

Carbon dioxide (CO 2 ) must be removed from the atmosphere to mitigate the negative effects of climate change. However, the most scalable methods for removing CO 2 from the air require heat from fossil-fuel combustion to produce pure CO 2 and continuously regenerate the sorbent. Bipolar-membrane electrodialysis (BPM-ED) is a promising technology that uses renewable electricity to dissociate water into acid and base to regenerate bicarbonate-based CO 2 capture solutions, such as those used in chemical loops of direct-air-capture (DAC) processes, and in direct-ocean capture (DOC) to promote atmospheric CO 2 drawdown via decarbonization of the shallow ocean. In this study, we develop an experimentally validated 1D model for the electrochemical regeneration of CO 2 from bicarbonate-based carbon capture solutions and seawater using BPM-ED. For DAC, our experimental and computational results demonstrate that pH swings induced by BPM water dissociation drive the formation of CO 2 at the cation-exchange layer|catholyte interface with energy-intensities of less than 150 kJ mol -1 . However, high rates of bubble formation increase energy intensity at current densities >100 mA cm -2 . Correspondingly, accelerating water dissociation catalysis and enacting bubble removal could enable CO 2 recovery at energy intensities <100 kJ mol -1 and current densities >100 mA cm -2 . For DOC, mass transport limitations associated with low carbon concentrations in oceanwater suggest that DOC is best suited for clean production of acid and base usable in downstream processes. Further, these results provide design principles for industrial-scale CO 2 recovery using BPM-ED.

54 ENVIRONMENTAL SCIENCES↗

Sustainable forest management for carbon, wood and biodiversity must consider natural disturbance regimes

Abstract Forests provide multiple benefits that include sequestering carbon, supporting biodiversity, and providing wood products. Managing temperate forests to achieve these benefits sustainably is challenging given the legacy of past human impacts, the complexity of forest development, and increasing but unpredictable disturbances. These intricacies prompted debate about the most effective management of temperate forests to achieve climate mitigation while sustaining forest productivity, regeneration, and diversity. Most research focused on management impacts under relatively stable environmental conditions, whereas forests are facing increasingly frequent and more severe climatic and biotic disturbances. Here, we used a regionally calibrated forest growth model to simulate the effects of forest management on carbon, biodiversity, and wood production under prevalent natural disturbances in the northeastern US. We developed scenarios combining forest management and disturbance regimes based on assumptions of species-specific tree regeneration and mortality rates. We compared passive management with no cutting that prioritizes maintaining existing forest trees with two common regional harvest practices: exploitative timber harvest that prioritizes short-term wood production and regenerative timber harvest that prioritizes regenerating biodiverse native forest tree seedlings. In the absence of natural disturbance, no cutting provides 41% higher forest carbon storage and 50% higher tree structural diversity after 100 years than exploitative or regenerative practices. The presence of drought, windstorm, pest, and disease disturbances altered these outcomes. Regenerative forest management provides 25% higher forest carbon storage and 26% higher tree structural diversity after 100 years than no cutting. Our results demonstrate that wood products and their carbon storage and fossil emission avoidance are important for determining the total climate benefits of forest management under natural disturbances. Our findings highlight that natural disturbance regimes should be considered when selecting management to promote multiple forest benefits, suggesting the need for tailored as opposed to one-size-fits-all policies to sustainably manage temperate forests worldwide.

Liu, Weier (ORCID:0000000265914239)↗

The Effects of Development Constraints on Forest Management at the Urban‐Forest Interface

Abstract This article develops a model of a forest owner operating in a small, open‐city environment where the rent for developed land is increasing concave in nearby preserved open space and is rising over time, reflecting an upward trend in households’ income. Within this framework we examine how changes in nearby preserved open space and alternative development constraints affect an individual private landowner's decisions regarding both regeneration harvests and conversion dates. We also examine how such policies affect development density once conversion from forestry to residential use occurs. We show that when residential rents change over time, the nature of the timber problem at the urban‐forest interface changes because it forces us to allow for the possibility of changes in land use from timber to residential use. As a result, the traditional Faustmann setup is not suitable to study forest management decisions at this interface. We also find that in the presence of rising income, increases in permanently preserved open space hasten regeneration and conversion cuts of a neighboring parcel currently under forest use and leads to lower density development once conversion takes place compared to the case where income is constant. We also find that both a binding development moratorium and a binding minimum‐lot‐size policy can postpone regeneration and conversion cut dates and thus help to protect open space, even if only temporarily. However, the policies do not have the same effects on development density of converted forestland. While the former leads to high‐density development, the latter encourages low‐density development.

Cunha‐e‐Sá, Maria A.↗

Soil microbiome feedbacks during disturbance-driven forest ecosystem conversion

Abstract Disturbances cause rapid changes to forests, with different disturbance types and severities creating unique ecosystem trajectories that can impact the underlying soil microbiome. Pile burning—the combustion of logging residue on the forest floor—is a common fuel reduction practice that can have impacts on forest soils analogous to those following high-severity wildfire. Further, pile burning following clear-cut harvesting can create persistent openings dominated by nonwoody plants surrounded by dense regenerating conifer forest. A paired 60-year chronosequence of burn scar openings and surrounding regenerating forest after clear-cut harvesting provides a unique opportunity to assess whether belowground microbial processes mirror aboveground vegetation during disturbance-induced ecosystem shifts. Soil ectomycorrhizal fungal diversity was reduced the first decade after pile burning, which could explain poor tree seedling establishment and subsequent persistence of herbaceous species within the openings. Fine-scale changes in the soil microbiome mirrored aboveground shifts in vegetation, with short-term changes to microbial carbon cycling functions resembling a postfire microbiome (e.g. enrichment of aromatic degradation genes) and respiration in burn scars decoupled from substrate quantity and quality. Broadly, however, soil microbiome composition and function within burn scar soils converged with that of the surrounding regenerating forest six decades after the disturbances, indicating potential microbial resilience that was disconnected from aboveground vegetation shifts. This work begins to unravel the belowground microbial processes that underlie disturbance-induced ecosystem changes, which are increasing in frequency tied to climate change.

Nelson, Amelia R.↗

J/{psi} production and elliptic flow in relativistic heavy-ion collisions

Using the two-component model for charmonium production, which includes contributions from both initial hard nucleon-nucleon scattering and from regeneration in the quark-gluon plasma, we study the nuclear modification factor R{sub AA} and elliptic flow v{sub 2} of J/{psi} in relativistic heavy-ion collisions. For the expansion dynamics of produced hot, dense matter, we introduce a schematic fireball model with its transverse acceleration determined from the pressure gradient inside the fireball and azimuthally anisotropic expansion parametrized to reproduce measured v{sub 2} of light hadrons. We assume that light hadrons freeze out at the temperature of 120 MeV while charmonia freeze out at 160 MeV, similar to the kinetic and chemical freeze-out temperatures in the statistical model, respectively. For the properties of charmonia in the quark-gluon plasma, we use the screening mass between their charm and anticharm quarks and their dissociation cross sections given by the perturbative quantum chromodynamical (pQCD) calculations in the leading order and up to the next-to-leading order, respectively. For the relaxation time of charm and anticharm quarks in the quark-gluon plasma, we also use the one calculated in the leading-order pQCD. Modeling the effect of higher-order corrections in pQCD by introducing multiplicative factors to the dissociation cross sections of charmonia and the elastic scattering cross sections of charm and anticharm quarks, we find that this effect is small for the R{sub AA} of J/{psi} as they suppress the number of initially produced J/{psi} but enhance the number of regenerated ones. The higher-order corrections increase, however, the v{sub 2} of J/{psi}. Our results suggest that the v{sub 2} of J/{psi} can play an important role in discriminating between J/{psi} production from initial hard collisions and from regeneration in the quark-gluon plasma.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A High-Speed High-Power-Density Non-Heavy Rare-Earth Permanent Magnet Traction Motor

There has been a global push for higher torque density and lower cost traction motors. The use of non-heavy rare-earth (non-HRE) permanent magnet materials in traction motors are being investigated for the sustainability, profitability and affordability of electric vehicles and to broaden their adoption. A 20,000-rpm permanent magnet traction motor using non-HRE magnet materials is proposed. A dual three-phase winding configuration driven by a segmented dual three-phase drive is proposed to reduce the current ripple, and as a result, the DC Link capacitor, as well as to ease the voltage constraint at high speed and eliminate any risk of uncontrolled regeneration. Furthermore, the dual winding configuration enables a fault tolerant design which is useful for reliability. The paper presents comprehensive electromagnetic, thermal and mechanical designs and analyses using an integrated approach. The results have shown that the design is robust against demagnetization and confirmed its thermal and mechanical viability.

47 OTHER INSTRUMENTATION↗

Inhibition of PTEN activity promotes IB4‐positive sensory neuronal axon growth

Abstract Traumatic nerve injuries have become a common clinical problem, and axon regeneration is a critical process in the successful functional recovery of the injured nervous system. In this study, we found that peripheral axotomy reduces PTEN expression in adult sensory neurons; however, it did not alter the expression level of PTEN in IB4‐positive sensory neurons. Additionally, our results indicate that the artificial inhibition of PTEN markedly promotes adult sensory axon regeneration, including IB4‐positive neuronal axon growth. Thus, our results provide strong evidence that PTEN is a prominent repressor of adult sensory axon regeneration, especially in IB4‐positive neurons.

Zhou, Li‐Yu↗

Uranium Adsorption on Ion-Exchange Resins - Batch Testing

The uranium adsorption performance of five resins (Dowex 1, Dowex 21K 16-30 [fresh], Dowex 21K 16-30 [regenerated], Purofine PFA600/4740, and ResinTech SIR-1200) were tested using unspiked, nitrate-spiked, and nitrate-spiked/pH adjusted source water from well 299-W19-36. These batch tests were conducted in support of a resin selection process in which the best resin to use for uranium treatment in the 200-West Area groundwater pump-and-treat system will be identified. The results from these tests are as follows: • The data from the high-nitrate (1331 mg/L) tests indicated that Dowex 1, Dowex 21K 16-30 (fresh), Purofine PFA600/4740, and ResinTech SIR-1200 all adsorbed uranium similarly well with Kd values ranging from ~15,000 to 95,000 ml/g. All four resins would be considered suitable for use in the treatment system based on uranium adsorption characteristics. • Lowering the pH of the high nitrate test conditions from 8.2 to 7.5 did not significantly change the uranium adsorption isotherms for the four tested resins. The Kd values for these four resins under high nitrate (1338 mg/L), lower pH (7.5) ranged from ~15,000 to 80,000 ml/g. • Higher nitrate concentrations greatly reduced the uranium adsorption on all four resins. Tests conducted with unspiked (no amendments; nitrate at 337 mg/L and pH at 8.2) source water yielded Kd values for Dowex 1, Dowex 21K 16-30 (fresh), Purofine PFA600/4740, and ResinTech SIR-1200 resins ranging from ~800,000 to >3,000,000 ml/g. These values are about two orders of magnitude higher than the Kd values noted from tests conducted using amended source water. • Compared to the fresh resin, the regenerated Dowex 21K 16-30 resin exhibited significantly lower uranium-adsorption performance under all test conditions. The calculated Kd values for the regenerated resin were typically an order of magnitude lower than the values calculated for the fresh resin. • Additional testing using laboratory columns is recommended to better resolve differences between the adsorption abilities of the resins and to develop estimates of uranium loading on the resins. By determining the quantity of uranium that each resin can adsorb and the time required to reach various levels of loading, resin lifetime in the treatment system can be estimated.

36 MATERIALS SCIENCE↗

Identification of Cell Wall Synthesis Regulatory Genes Controlling Biomass Characteristics and Yield in Rice (Oryza Sativa)

This project aims to identify the regulatory genes of rice cell wall synthesis pathways using a cell wall removal and regeneration system. We completed the gene expression profiling studies following the time course from cell wall removal to cell wall regeneration in rice suspension cells. We also completed, total proteome, nuclear subproteome and histone modification studies following the course from cell wall removal and cell wall regeneration process. A large number of differentially expressed regulatory genes and proteins were identified. Meanwhile, we generated RNAi and over-expression transgenic rice for 45 genes with at least 10 independent transgenic lines for each gene. In addition, we ordered T-DNA and transposon insertion mutants for 60 genes from Korea, Japan, and France and characterized the mutants. Overall, we have mutants and transgenic lines for over 90 genes, exceeded our proposed goal of generating mutants for 50 genes.

09 BIOMASS FUELS↗