SEARCH · Engineering Papers

Results for “Pulse generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Ultrafast state-selective tunneling in two-dimensional semiconductors with a phase- and amplitude-controlled THz-scanning tunneling microscope

THz-pulse driven scanning tunneling microscopy (THz-STM) enables access to the ultrafast quantum dynamics of low-dimensional material systems at simultaneous ultrafast temporal and atomic spatial resolution. State-selective tunneling requires precise amplitude and phase control of the THz pulses combined with quantitative near-field waveform characterization. Here, we employ our state-of-the-art THz-STM with multi-MHz repetition rates, efficient THz generation, and precisely tunable THz waveforms to investigate a single sulfur vacancy in monolayer MoS2. We demonstrate that 2D transition metal dichalcogenides (TMDs) are an ideal platform for near-field waveform sampling by THz cross-correlation. Furthermore, we determine the THz voltage via QEV scans, which measure the THz rectified charge Q as a function of THz field amplitude E and dc bias Vdc. Mapping the complex energy landscape of localized states with a resolution down to 0.01 electrons per pulse facilitates state-selective tunneling to the HOMO and LUMO orbitals of a charged sulfur vacancy.

Materials Science↗

DOE OSTI2024

Analysis of fusion fuel conditions and instability development in shocklessly compressed MagLIF implosion simulations

Magnetized liner inertial fusion (MagLIF) implosions on the Z accelerator have almost exclusively been driven by ∼100-ns rise time current pulses. The rise time is selected to be as short as achievable on Z partially to minimize the time during which deleterious implosion instabilities can develop. Modifying the shape of the current pulse could provide benefits for MagLIF, including more efficient compression of the fusion fuel and the magnetic flux inside the liner cavity. Quasi-isentropic compression of the liner prevents formation of shocks in the liner material and reduces the amount of entropy generation within the liner. This allows for more final compression of the liner and fuel assembly. We present results from one-dimensional (1D) radiation-magnetohydrodynamic (rad-MHD) simulations comparing thermonuclear fuel conditions in MagLIF implosions driven with two different current pulses: a ∼100-ns rise time, ∼21.5 MA peak current “short pulse” and a ∼200-ns rise time, ∼21.5 MA peak current “shockless” pulse. We also quantify and compare the instability development in three-dimensional (3D) MHD implosion simulations driven by these two different pulse shapes. Our 1D simulations indicate that the shocklessly compressed MagLIF implosion performs better than the short pulse driven implosion with a >50% higher thermonuclear neutron yield, and 3D simulations indicate comparable implosion instability development, suggesting that pulse shaping could enable improvements to MagLIF performance on Z without compromising implosion stability.

Shipley, G. A. (ORCID:0000000205364001)↗

DOE OSTI2020

High-order harmonic generation in solid C 60

High-order harmonic generation (HHG) has unleashed the power of strong laser physics in solids. Here we investigate HHG from a large system, solid C 60 , with 240 valence electrons engaging harmonic generation at each crystal momentum. We employ the density functional theory and the time-dependent Liouville equation of the density matrix to compute HHG signals. We find that under a moderately strong laser pulse, HHG signals reach 15th order, consistent with the experimental results from C 60 plasma. The helicity dependence in solid C 60 is weak, due to the high symmetry. In contrast to the general belief, HHG is unsuitable for band structure mapping in C 60 . However, we find a window of opportunity using a long wavelength, where harmonics are generated through multiple-photon excitation. In particular, the fifth-order harmonic energies closely follow the transition energy dispersion between the valence and conduction bands. Finally, this finding is expected to motivate future experimental investigations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Light-driven nanoscale vectorial currents

Controlled charge flows are fundamental to many areas of science and technology, serving as carriers of energy and information, as probes of material properties and dynamics and as a means of revealing or even inducing broken symmetries. Emerging methods for light-based current control offer particularly promising routes beyond the speed and adaptability limitations of conventional voltage-driven systems. However, optical generation and manipulation of currents at nanometre spatial scales remains a basic challenge and a crucial step towards scalable optoelectronic systems for microelectronics and information science. Here we introduce vectorial optoelectronic metasurfaces in which ultrafast light pulses induce local directional charge flows around symmetry-broken plasmonic nanostructures, with tunable responses and arbitrary patterning down to subdiffractive nanometre scales. Local symmetries and vectorial currents are revealed by polarization-dependent and wavelength-sensitive electrical readout and terahertz (THz) emission, whereas spatially tailored global currents are demonstrated in the direct generation of elusive broadband THz vector beams 17 . We show that, in graphene, a detailed interplay between electrodynamic, thermodynamic and hydrodynamic degrees of freedom gives rise to rapidly evolving nanoscale driving forces and charge flows under the extremely spatially and temporally localized excitation. These results set the stage for versatile patterning and optical control over nanoscale currents in materials diagnostics, THz spectroscopies, nanomagnetism and ultrafast information processing.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Collateral benefits: River flow normalization for endangered fish enabled riparian rejuvenation

Abstract Like most rivers worldwide, the transboundary North American Kootenay/i River has experienced multiple impacts including watershed developments, river channelization, and floodplain clearing, draining, and diking. Construction of Libby Dam was authorized by the 1964 Columbia River Treaty (CRT) between the United States and Canada, and in 1975 began regulating downstream flows for flood risk management and hydropower generation. Following cumulative impacts, the endemic Kootenai River White Sturgeon population collapsed and was designated as endangered in 1994 (U.S. Endangered Species Act). Subsequent Biological Opinions from the U.S. Fish and Wildlife Service prescribed Libby Dam operations to provide springtime flow pulses for sturgeon spawning. These provided the unanticipated benefit of substantial seedling recruitment of native and introduced riparian cottonwoods and willows. The regulated flow regime was further adaptively managed to provide a more normative (natural) regime, to balance ecological functions with flood risk management and hydropower generation. The broadened ecological considerations would be consistent with the proposed priorities for the modernization of the international CRT. The observed responses revealed that (1) diverse aquatic and riparian organisms are dependent on common river flow characteristics; (2) a normalized flow regime provided substantial ecological benefits; and (3) due to multiple influences, hybrid ecosystems develop along regulated rivers, with a blending of natural and altered processes and communities. For other regulated rivers, we recommend that (1) high springtime flows be allowed, as feasible; (2) followed by the gradual post‐peak recession; and (3) the maintenance of sufficient flows through the warm and dry interval of mid to late summer.

Rood, Stewart B.↗

DOE OSTI2024

Dephasing of ion beams as magnetic vortex acceleration regime transitions into a bubble-like field structure

The interaction of an ultra-intense laser pulse with a near critical density target results in the formation of a plasma channel, a strong azimuthal magnetic field and moving vortices. An application of this is the generation of energetic and collimated ion beams via magnetic vortex acceleration. The optimized regime of magnetic vortex acceleration is becoming experimentally accessible with new high intensity laser beamlines coming online and advances made in near critical density target fabrication. The robustness of the acceleration mechanism with realistic experimental conditions is examined with three-dimensional simulations. Of particular interest is the acceleration performance with different laser temporal contrast conditions, in some cases leading to pre-expanded target profiles prior to the arrival of the main pulse. Preplasma effects on the structure of the accelerating fields are explored, including a detailed analysis of the ion beam properties and the efficiency of the process. Improved scaling laws for the magnetic vortex acceleration mechanism, including the laser focal spot size effects, are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

A high-power, high-repetition-rate THz source for pump–probe experiments at Linac Coherent Light Source II

Experiments using a THz pump and an X-ray probe at an X-ray free-electron laser (XFEL) facility like the Linac Coherent Light Source II (LCLS II) require frequency-tunable (3 to 20 THz), narrow bandwidth (~10%), carrier-envelope-phase-stable THz pulses that produce high fields (>1 MV cm –1 ) at the repetition rate of the X-rays and are well synchronized with them. Herein, a two-bunch scheme to generate THz radiation at LCLS II is studied: the first bunch produces THz radiation in an electromagnet wiggler immediately following the LCLS II undulator that produces X-rays from the second bunch. The initial time delay between the two bunches is optimized to compensate for the path difference in THz transport. The two-bunch beam dynamics, the THz wiggler and radiation are described, as well as the transport system bringing the THz pulses from the wiggler to the experimental hall.

42 ENGINEERING↗

DOE OSTI2024

Atomic-Scale Interface for Pt Nanoparticles on SrTiO 3 (001)

The interfacial structure formed by Pt nanoparticles grown epitaxially on a SrTiO 3 (001) surface by pulsed laser deposition was studied by X-ray standing-wave (XSW) excited core-level photoelectron emission. The XSW-generated 3D atomic map of the Pt and interfacial oxygens for the oxidized Pt/SrTiO 3 interface differs significantly from that of the as-deposited interface. After oxidation, the Pt atoms shifted upward and their atomic occupation at fcc-like sites evolved as the oxidation temperature increased. Interfacial oxygen atoms were differentiated from bulk O atoms by the chemical shift in the binding energy of their 1s electrons. After oxidation, the interfacial oxygen atoms rearranged to form a TiO 2 bilayer at the interface. Furthermore, these results provide a more complete description of the strong metal–support interaction process at the interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Characterization of Temperature Heterogeneity in Utility-Scale Power Plant Boilers by Spatially Distributed Ultrasonic Measurements

In extreme environments, even hardened insertion sensors fail quickly. For such environments, we have developed an ultrasonic (US) method for measuring the spatial distribution of temperatures in solid materials and, specifically, across containments of extreme processes. By deploying US sensors in multiple locations, spatial heterogeneity in temperatures inside harsh environments may be characterized. In this note, we update our progress on testing the developed approach in an industrial setting and its performance in describing the temperature distribution inside a 500 MW (electrical) coalfired utility boiler of an electrical power generation plant. We use waveguides (WG) structured to contain echogenic features that produce a train of echoes in response to an excitation pulse. The time of flight between echoes encodes the information on the temperature distribution in the corresponding segment of the WG, which we reconstruct using its parametrization. Five waveguides were welded to the boiler’s heat exchange surface (waterwall) and different locations at the same boiler elevation and produced reliable US waveforms 18 months after the installation. For several weeks during the latest trial, we performed US measurements in five locations spanning half of the boiler’s 14-meter width. The measurements were acquired during regular operation, including load cycling to adjust for demand and intermittent contributions of renewable power sources, and during boiler shutdown for emergency maintenance and the subsequent restart. The interpretation of US waveforms by signal processing resulted in an accurate estimation of temperature distribution along the waveguides. We captured daily cyclical variations in demand-following load. Measurements performed in multiple locations revealed unexpected temperature variations across the boiler. We conclude that an array of developed sensors can provide responsive and spatial temperature measurements while maintaining functionality despite prolonged exposure to an extreme environment.

Walton, Kenneth↗

DOE OSTI2022

Mitigation of Dielectric Heating of Piezoelectric Actuators at Cryogenic Temperatures

The new generation of low beam intensity superconducting linacs will require high accelerating gradients for new scientific discoveries. The high accelerating gradient cavities in pulsed SRF linacs will experience large (~1000’s of Hz) detuning caused by Lorentz force detuning (LFD). The piezo actuators that will be used to compensate large LFD must operate at a nominal voltage of 120V to 150V to deliver the required stroke to the cavity. In this high voltage range, the piezo is expected to warm up drastically due to its location in an insulating vacuum environment. Overheating of the piezo will significantly decrease the longevity of the actuator. A collaboration between FNAL and Physik Instrumente (PI) developed a novel piezo actuator design that mitigates piezo overheating. The design consists of using a metal foam in contact with the piezoelectric ceramic stack for heat removal. The second solution used lithium niobite as an alternative material. A comparison of the temperature stability will be presented and discussed. This study characterizes the dielectric properties for both materials. The results obtained are in the temperature range of 10 K to 300 K.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Electromagnetic Fireworks: Fast Radio Bursts from Rapid Reconnection in the Compressed Magnetar Wind

One scenario for the generation of fast radio bursts (FRBs) is magnetic reconnection in a current sheet of the magnetar wind. Compressed by a strong magnetic pulse induced by a magnetar flare, the current sheet fragments into a self-similar chain of magnetic islands. Time-dependent plasma currents at their interfaces produce coherent radiation during their hierarchical coalescence. We investigate this scenario using 2D radiative relativistic particle-in-cell simulations to compute the efficiency of the coherent emission and to obtain frequency scalings. Consistent with expectations, a fraction of the reconnected magnetic field energy, f ~ 0.002, is converted to packets of high-frequency fast magnetosonic waves, which can escape from the magnetar wind as radio emission. In agreement with analytical estimates, we find that magnetic pulses of 10 47 erg s –1 can trigger relatively narrowband GHz emission with luminosities of approximately 10 42 erg s –1 , sufficient to explain bright extragalactic FRBs. The mechanism provides a natural explanation for a downward frequency drift of burst signals, as well as the ~100 ns substructure recently detected in FRB 20200120E.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Beam Profile Measurements Utilizing an Amplitude Modulated Pulsed Fiber Laser at PIP2IT

Fermilab is undertaking the development of a new 800 MeV superconducting RF linac to replace its present normal conducting 400 MeV linac. The PIP-II linac consists of a warm front-end generating 2 mA of 2.1 MeV H⁻ followed immediately by a series of superconducting RF cryomodules to 800 MeV. To limit the potential damage to the superconducting RF cavities, PIP-II will utilize laser-based monitors to obtain beam profiles via photoionization. This paper will present the results of transverse and longitudinal beam profile measurements using a prototype profile monitor that was tested with 2.1 MeV H⁻ beam at the PIP-II Injector Test (PIP2IT) accelerator. This prototype profile monitor utilizes a high repetition rate fiber laser and fiber optic transport into the PIP2IT enclosure. In addition, results will be shown of narrow-band electron detection from amplitude modulated laser pulses.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Spatio-temporal electric field distributions in an atmospheric plasma jet impinging on a microchannel array surface

The electric field distribution in the ionization waves (IWs) propagating over a microchannel array dielectric surface, with the channels either empty or filled with distilled water, is measured by ps electric field induced second harmonic generation. The surface IW is initiated by the atmospheric pressure N 2 –Ar plasma jet impinging on the surface vertically and powered by ns pulse discharge bursts. The results show that the electric field inside the microchannels, specifically its horizontal component, is enhanced by up to a factor of 2. The field enhancement region is localized within the channels. The vertical electric field inside the channels lags in time compared to the field measured at the ridges, indicating the transient reversal of the IW propagation direction across the channels (toward the jet). This is consistent with the phase-locked plasma emission images and confirmed by the kinetic modeling predictions, which show that the IW ‘jumps’ over the empty channels and propagates into the channels only after the jump between the adjacent ridges. When the channels are filled with water, the wave speed increases by up to 50%, due to the higher effective dielectric constant of the surface. No evidence of a significant electric field enhancement near the dielectric surface (ceramic or water) has been detected, within the spatial resolution of the present diagnostic, ~100 μ m.

plasmas and liquids↗

DOE OSTI2026

Fiber coupled laser ultrasound system using a single mode hollow core fiber for excitation laser: Theory and demonstration for on-machine thickness gauging

Laser ultrasound (LU) is a technique that uses a pump laser and a probe laser to optically generate and detect elastic waves in a material. Despite its advantages over traditional contact transducer-based ultrasound, industrial adoption has been limited by complex optical setups and the inability of multi-mode fibers to deliver a stable Gaussian profile for the pump laser. Here, we report a fully fiber-coupled thermoelastic LU system that uses an anti-resonant hollow-core single-mode fiber to deliver 1 mJ nanosecond pulses of 1064 nm light, while preserving the fundamental Gaussian mode (pump laser). When combined with a fiber-coupled interferometer (probe laser), a small, flexible, and environmentally robust sensor capable of optically generating and detecting high frequency broadband ultrasound is realized. We demonstrate such an LU system implemented in situ on a four-axis precision lathe. High-resolution thickness gauging is performed, before and after precision cutting, by exciting and measuring a zero-group velocity guided wave mode. The measurements are verified with ex-situ traceable coordinate measuring machine data. Mean absolute deviations of 0.1%, of nominal thickness, before cutting, and 0.2% and 0.3%, after stepped and tapered cuts, respectively, are reported. A theoretical background for thermoelastic ultrasound generation in an elastic waveguide is also presented. Attention is given to the effect of the pump laser profile on wave generation to elucidate the importance of using single-mode laser light. The fiber-coupled system demonstrated is well-suited for use in scientific and engineering sensing applications and facilitates the adoption of LU for industrial non-destructive testing.

Engineering↗

DOE OSTI2026

Diagnostic x-ray source using electrons produced by a 100 J-class picosecond laser

Many laser-based high-energy-density science (HEDS) facilities have one or more short-pulse (sub- to few-picosecond) laser beams for diagnostics. For the past decade, we have been developing a novel x-ray probing capability using such picosecond lasers interacting with an underdense plasma to produce relativistic electrons. The ultimate goal of these experiments is to demonstrate a new type of x-ray backlighter using the short-pulse ARC laser at the National Ignition Facility (NIF). Before this diagnostic is fielded at the NIF, it is critical to demonstrate the viability and reproducibility of the x-ray source on comparable high-power short-pulse laser systems. We present experiments that were carried out with the OMEGA EP laser at the University of Rochester’s laboratory for laser energetics. In these experiments, high-energy electrons are produced through a combination of the self-modulation instability and direct laser acceleration in an underdense gas jet. These electrons generate directional x-rays with characteristic energies up to several tens of keV as they execute betatron motion in the ion channel, and the inverse Compton scattering process generates even harder x-rays, with characteristic photon energies of 60–240 keV. When implemented on the OMEGA EP laser(s), this x-ray source yields results that are comparable to those obtained recently on the short-pulse Titan laser at the Jupiter Laser Facility at Lawrence Livermore National Laboratory, after accounting for differences in laser energy, peak intensity, focusing f/#, and plasma source. Applications of such an x-ray source for HEDS experiments are discussed.

backlighter↗

DOE OSTI2022

Substituent Effects on the Electronic Spectroscopy of Four-Carbon Criegee Intermediates

Atmospheric ozonolysis of biogenic and anthropogenic alkenes generates zwitterionic carbonyl oxide intermediates (R 1 R 2 C=O + O – ), known as Criegee intermediates, with different structural motifs and conformations. This study reports a systematic laboratory study of substituent effects on the electronic spectroscopy of four-carbon Criegee intermediates (CIs) with methyl–ethyl (MECI) and isopropyl (IPCI) groups, which are isomers produced in ozonolysis of asymmetric branched alkenes. The four-carbon CIs are separately generated by an alternative synthetic route, and spectroscopically characterized on the strong π* ← π transition associated with the carbonyl oxide group in a pulsed supersonic expansion with VUV photoionization at 118 nm and UV-induced depletion of the m/z 88 signal. The resultant broad and unstructured UV spectral features for MECI and IPCI are peaked at ca. 320 and 330 nm, respectively, with large absorption cross-sections of ca. 10 –17 cm 2 . Comparisons are made with the four-carbon CIs formed in isoprene ozonolysis, methyl vinyl ketone oxide (MVK-oxide) and methacrolein oxide (MACR-oxide), which have the same backbone connectivity as MECI and IPCI but have extended conjugation across the vinyl and carbonyl groups. A remarkable 50 nm shift of the peak absorption to longer wavelength is observed for MVK-oxide and MACR-oxide compared to MECI and IPCI, respectively. Furthermore, vertical excitation energies computed theoretically agree well with the experimental findings, confirming that the spectral shifts are caused by the extended π conjugation in the isoprene-derived Criegee intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Phase control of spin waves in the van der Waals antiferromagnet NiPS 3

Here we demonstrate phase control of magnons in the van der Waals antiferromagnet NiPS3 using optical excitation by polarized light. The sign of the coherent precession of spin amplitude changes upon (i) reversing the helicity of a circularly polarized pump beam, or (ii) rotating the polarization of a linearly polarized pump by π/2. Because these two excitation pathways have comparable generation efficiency, the phase of spin precession can be continuously tuned from 0 to 2π by controlling the polarization state of the pump pulse. The ability to excite magnons with a desired phase has potential applications in the design of a spin-wave phased array and ultrafast spin information processing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Vulnerability Studies Under EMP: Impedance and PCI Testing of the Grid Control Devices

Control devices such as inverters and generator controllers are critical for the stable operation of the power grid, especially for power stability control and power dispatch. However, the Electromagnetic Pulse (EMP) is a potential threat to electronic devices in modern power grids, therefore decreasing the power grid resilience and bringing unrecoverable damages to the devices. To reveal the impact mechanism of the EMP, impedance and Pulse Current Injection (PCI) testing is established to study the vulnerability of the grid control devices. The impedance of the grid control devices is accurately measured using impedance analyzers with different frequency ranges. Then the voltage and current responses are tested based on the PCI testing. The vulnerability experiments based on two grid control devices are carried out. And the comparison results reveal that most ports would be damaged under EC8, and some ports can survive under EC5 according to the calculated PCI response and cumulative energy. The results can provide a reference for the future design of control devices and the strategic resilience of power grids.

Qiu, Wei↗