Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Platform materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Noncollinear phases in moiré magnets

Significance Moiré patterns, which result when two or more two-dimensional materials with incommensurate or rotated lattices are layered together, create controllable electronic bands that have recently been shown to induce a tremendous wealth of physical phenomena. Here we initiate the theoretical study of moiré patterns’ influence on magnetic states of localized spins. We construct a general formalism using continuum field theory and present thorough analyses in twisted bilayers of antiferromagnets and also ferromagnets, which are within the experimental reach of Van der Waals materials. Two-dimensional magnets, well known for their strong intrinsic spin fluctuations, may serve as a new platform for moiré effects and open the door to a large class of novel phenomena that were once unimaginable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Robust Millisecond Coherence Times of Erbium Electron Spins

Erbium doped solids are prime candidates for quantum memories in optical quantum networks given their telecom-compatible photon emission. An electron spin of erbium with millisecond coherence time is desirable for generating remote entanglement between adjacent quantum network nodes. Here, in this study, we report GHz-range electron spin transitions of 167 Er 3+ in yttrium oxide (Y 2 O 3 ) matrix with coherence times that are consistently longer than a millisecond. By polarizing para magnetic impurity spins we achieve a spin T 2 up to 1.46 ms, and up to 7.1 ms after dynamical decoupling. These coherence lifetimes are among the longest found for erbium in crystalline matrices despite the presence of host nuclear spins. We further enhance the coherence time beyond conventional dynamical decoupling, using customized sequences to simultaneously mitigate spectral diffusion and dipolar interactions. Our study not only establishes 167 Er 3+ : Y 2 O 3 as a significant quantum memory platform but also provides a guideline for engineering long-lived erbium spins in a variety of host materials for quantum technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Proximity-induced equilibrium supercurrent and perfect superconducting diode effect due to band asymmetry

Herein we theoretically investigate the consequences of proximity-induced conventional superconductivity in metals that break time-reversal and inversion symmetries through their energy dispersion. We discover behaviors impossible in an isolated superconductor such as an equilibrium supercurrent that apparently violates a no-go theorem and, at suitable topological defects, nonconservation of electric charge reminiscent of the chiral anomaly. The equilibrium supercurrent is expected to be trainable by a helical electromagnetic field in the normal state. Remarkably, if the band asymmetry exceeds the critical current of the parent superconductor in appropriate units, we predict a perfect superconducting diode effect with diode coefficient unity. We propose toroidal metals such as UNi 4 ⁢B and metals with directional scalar spin chiral order as potential platforms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quantum materials for nanosensing and fault-tolerant quantum computing

New concepts of symmetry related to topological order emerged from the discovery of the fractional quantum Hall effect and high-temperature superconductivity in strongly correlated electron systems. This led to the study of quantum materials-- materials exhibiting emergent quantum phenomena with no classical analogues. While these materials have engendered exciting basic materials science and physics, realizing novel devices is a key challenge in the field. The goal of this proposal is to harness the unique properties of topological materials for quantum computing and quantum sensing applications. In this project, we investigated a variety of topological superconducting platforms and identified three technologies that can benefit from their quantum properties: quantum memory, single-photon detection, and non reciprocal electronics. The platforms developed in this work will be broadly useful to National Security and Basic Science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Liquid Chromatography Coupled to Refractive Index or Mass Spectrometric Detection for Metabolite Profiling in Lysate-based Cell-free Systems

Engineering cellular metabolism for targeted biosynthesis can require extensive design-build-test-learn (DBTL) cycles as the engineer works around the cell's survival requirements. Alternatively, carrying out DBTL cycles in cell-free environments can accelerate this process and alleviate concerns with host compatibility. A promising approach to cell-free metabolic engineering (CFME) leverages metabolically active crude cell extracts as platforms for biomanufacturing and for rapidly discovering and prototyping modified proteins and pathways. Realizing these capabilities and optimizing CFME performance requires methods to characterize the metabolome of lysate-based cell-free platforms. That is, analytical tools are necessary for monitoring improvements in targeted metabolite conversions and in elucidating alterations to metabolite flux when manipulating lysate metabolism. In this work, metabolite analyses using high-performance liquid chromatography (HPLC) coupled with either optical or mass spectrometric detection were applied to characterize metabolite production and flux in E. coli S30 lysates. Specifically, this report describes the preparation of samples from CFME lysates for HPLC analyses using refractive index detection (RID) to quantify the generation of central metabolic intermediates and by-products in the conversion of low-cost substrates (i.e., glucose) to various high-value products. The analysis of metabolite conversion in CFME reactions fed with 13 C-labeled glucose through reversed-phase liquid chromatography coupled to tandem mass spectrometry (MS/MS), a powerful tool for characterizing specific metabolite yields and lysate metabolic flux from starting materials, is also presented. Altogether, applying these analytical methods to CFME lysate metabolism enables the advancement of these systems as alternative platforms for executing faster or novel metabolic engineering tasks.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Evaluation of a novel mid-infrared pyrometer for dynamic material experiments

Dynamic experiments create high-pressure shock waves on the microsecond time scale (or smaller), compressing materials to high pressures and temperatures and enabling the study of material properties at these conditions. Other dynamic studies use quasi-isentropic compression to produce similar high pressures at much lower temperatures. High pressure experiments performed on dynamic platforms such as gas-guns, laser, and pinch machines generate up to several hundred GPa in the sample pressure conditions12. Related static studies include diamond anvil cells, which obtain high pressures and have extremely high precision, but are most often conducted at room temperature or modest temperature increases (often <2000K). By combining these methods, material properties across a wide range of thermodynamic conditions can be probed, and a high quality equation of state (EOS) constructed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two-step conversion of polyethylene into recombinant proteins using a microbial platform

Background: The increasing prevalence of plastic waste combined with the inefficiencies of mechanical recycling has inspired interest in processes that can convert these waste streams into value-added biomaterials. To date, the microbial conversion of plastic substrates into biomaterials has been predominantly limited to polyhydroxyalkanoates production. Expanding the capabilities of these microbial conversion platforms to include a greater diversity of products generated from plastic waste streams can serve to promote the adoption of these technologies at a larger scale and encourage a more sustainable materials economy. Results: Herein, we report the development of a new strain of Pseudomonas bacteria capable of converting depolymerized polyethylene into high value bespoke recombinant protein products. Using hexadecane, a proxy for depolymerized polyethylene, as a sole carbon nutrient source, we optimized media compositions that facilitate robust biomass growth above 1 × 10 9 cfu/ml, with results suggesting the benefits of lower hydrocarbon concentrations and the use of NH 4 Cl as a nitrogen source. We genomically integrated recombinant genes for green fluorescent protein and spider dragline-inspired silk protein, and we showed their expression in Pseudomonas aeruginosa, reaching titers of approximately 10 mg/L when hexadecane was used as the sole carbon source. Lastly, we demonstrated that chemically depolymerized polyethylene, comprised of a mixture of branched and unbranched alkanes, could be converted into silk protein by Pseudomonas aeruginosa at titers of 11.3 ± 1.1 mg/L. Conclusion: This work demonstrates a microbial platform for the conversion of a both alkanes and plastic-derived substrates to recombinant, protein-based materials. The findings in this work can serve as a basis for future endeavors seeking to upcycle recalcitrant plastic wastes into value-added recombinant proteins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Bipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation

A soft lithographic method is developed for making bipolar membranes (BPMs) with catalytic junctions formed from arrays of vertically oriented microscale cylinders. The membranes are cast from reusable polydimethylsiloxane (PDMS) molds made from silicon masters, which are fabricated on 2" to 4" wafer scales by nanosphere lithography. High-aspect-ratio junctions are made on a length scale similar to the thickness of optimized catalyst layers for water dissociation, creating a platform for probing the dual effects of catalysis and local electric field at the microscale BPM junction. Optimized polymer materials and nanoscale metal oxide catalysts are used in this study. 3D BPMs are tested under reverse and forward bias conditions, exhibiting superior performance relative to their 2D counterparts. Under forward bias in H 2- O 2 fuel cells, 3D BPMs achieve a current density of 1500 mA cm –2 , ≈7 times higher than 2D membranes made from the same materials.

25 ENERGY STORAGE↗
DOE OSTI2021

PRISMS-Fatigue computational framework for fatigue analysis in polycrystalline metals and alloys

Abstract The PRISMS-Fatigue open-source framework for simulation-based analysis of microstructural influences on fatigue resistance for polycrystalline metals and alloys is presented here. The framework uses the crystal plasticity finite element method as its microstructure analysis tool and provides a highly efficient, scalable, flexible, and easy-to-use ICME community platform. The PRISMS-Fatigue framework is linked to different open-source software to instantiate microstructures, compute the material response, and assess fatigue indicator parameters. The performance of PRISMS-Fatigue is benchmarked against a similar framework implemented using ABAQUS. Results indicate that the multilevel parallelism scheme of PRISMS-Fatigue is more efficient and scalable than ABAQUS for large-scale fatigue simulations. The performance and flexibility of this framework is demonstrated with various examples that assess the driving force for fatigue crack formation of microstructures with different crystallographic textures, grain morphologies, and grain numbers, and under different multiaxial strain states, strain magnitudes, and boundary conditions.

Chemistry↗
DOE OSTI2022

Low power implementation of high frequency SiPM readout for Cherenkov and scintillation detectors in TOF-PET

State-of-the-art (SoA) electronic readout for silicon photomultiplier (SiPM)-based scintillation detectors that demonstrate experimental limits in achievable coincidence time resolution (CTR) leverage low noise, high frequency signal processing to facilitate a single photon time response that is near the limit of the SiPMs architecture. This readout strategy can optimally exploit fast luminescence and prompt photon populations, and promising measurements show detector concepts employing this readout can greatly advance PET detector CTR, relative to SoA in clinical systems. However, the technique employs power hungry components which make the electronics chain impractical for channel-dense time-of-flight (TOF)-PET detectors. We have developed and tested a low noise and high frequency readout circuit which is performant at low power and consists of discrete elements with small footprints, making it feasible for integration into TOF-PET detector prototypes. A 3 × 3 mm 2 Broadcom SiPM with this readout chain exhibited sub-100 ps single photon time resolution at 10 mW of power consumption, with a relatively minor performance degradation to 120 ± 2 ps FWHM at 5 mW. CTR measurements with 3 × 3 × 20 mm 3 LYSO and fast LGSO scintillators demonstrated 127 ± 3 ps and 113 ± 2 ps FWHM at optimal power operation and 133 ± 2 ps and 121 ± 3 ps CTR at 5 mW. BGO crystals 3 × 3 × 20 mm 3 in size show 271 ± 5 ps FWHM CTR (1174 ± 14 ps full-width-at-tenth-maximum (FWTM)) at optimal power dissipation and 289 ± 8 ps (1296 ± 33 ps FWTM) at 5 mW. The compact and low power readout topology that achieves this performance thereby offers a platform to greatly advance PET system CTR and also opportunities to provide high performance TOF-PET at reduced material cost.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Niobium coaxial cavities with internal quality factors exceeding 1.4 × 10 9 for circuit quantum electrodynamics

Group-V materials such as niobium and tantalum have become popular choices for extending the performance of circuit quantum electrodynamics (cQED) platforms, allowing for quantum processors and memories with reduced error rates and more modes. The complex surface chemistry of niobium, however, makes identifying the main modes of decoherence difficult at millikelvin temperatures and single-photon powers. We use niobium coaxial quarter-wave cavities to study the impact of etch chemistry, prolonged atmospheric exposure, and the significance of cavity conditions prior to and during cooldown—in particular, niobium hydride evolution—on single-photon coherence. We demonstrate cavities with quality factors Q int ≳ 1.4 × 10 9 in the single-photon regime, a 15-fold improvement over aluminum cavities of the same geometry. We rigorously quantify the sensitivity of our fabrication process to various loss mechanisms and demonstrate a two- to fourfold reduction in the two-level system loss tangent and a three- to fivefold improvement in the residual resistance over traditional buffered chemical polishing etching techniques. Finally, we demonstrate transmon integration and coherent cavity control while maintaining a cavity coherence of 11.3 ms. The accessibility of our method, which can be easily replicated in academic laboratory settings, together with the demonstration of its performance, mark an advancement in three-dimensional cQED.

Oriani, Andrew E. [Chicago U., EFI; Chicago U.] (O↗
DOE OSTI2025

Evolution of surface morphology from Stranski–Krastanov growth mode to step-flow growth mode in InSbBi thin films

The incorporation of dilute concentrations of bismuth (Bi) into traditional III–V alloys leads to a significant reduction in bandgap energy, making InSbBi a promising candidate for long-wavelength (<0.17 eV) infrared photosensors. InSbBi offers potential as a platform for exploring spin dynamics and quantum phenomena due to its strong spin–orbit coupling. Despite this promise, the material quality of InSbBi alloys remains inferior to that of conventional III–V semiconductors, primarily due to the substantial challenges associated with incorporating Bi into InSb and producing high-quality InSbBi with varying Bi compositions. In this study, we address these issues by developing a molecular beam epitaxy approach to grow smooth InSbBi thin films with tunable Bi incorporation up to 1.8% of the group V sublattice, through dynamic adjustment of Sb flux and careful control of the interplay between growth temperature and the Bi flux. In conclusion, this work paves way for the development of high-quality InSbBi thin films for applications in photodetection, spintronics, and related quantum technologies.

Edirisinghe, Chandima Kasun [Univ. of Tennessee, K↗
DOE OSTI2019

A Model for Lean Corporate/ Startup Interfaces: Unlocking Resources of Midcap Corporations Providing a Pathway to Advanced Energy Technologies

Commercializing energy technologies through traditional market pathways is challenging for early-stage energy innovators. Development cycles in energy are long and expensive, and adoption is difficult, making energy technologies of limited interest to venture capital relative to industries with faster growth and shorter product life cycles such as life sciences and software. As such, partnerships with established corporations are one of the most promising, and in some cases only, go-to-market pathways for energy technologies. Startups often seek to work with, large well-known Fortune 500 (and similar) companies. However, the size and risk aversion of those firms often makes partnering challenging. It can take well over 12 months for a large corporation to agree to commercial terms and get internal board / management approval to move forward with a binding agreement with a startup for even a simple starting partnership. This timeline is prohibitive for most early-stage companies who are both time and money constrained, and often working in highly competitive commodity sectors. Mid-cap corporations ($\$ $100M to $\$ $10B) are a promising but untapped resource for partnering with technology developers because they are often nimbler, tend to be fiercely competitive, and are looking for new revenue or cost-saving opportunities. These factors make them both more receptive to disruptive technologies, and more capable of integrating them. However, while Fortune 500 companies often have venturing groups that facilitate the initial connection process, most midcap incumbents do not have the resources to create standalone corporate venture groups. As a result, although they could help each other significantly (startup technologies make midcaps more competitive; midcaps offer a faster commercialization pathway to startups), midcap companies and startups rarely work together. In 2017, ADL Ventures (ADL) received Award #DE-EE0008111 from DOE EERE’s Innovative Pathways program to unlock the domain expertise and material resources of midcap companies. The goal of the award was to support energy technology commercialization via an innovation platform for startups to interface with midcap corporations. During the grant period, we have developed a novel open innovation platform that allows financially conservative incumbents to efficiently engage with energy innovators and startups, thereby unlocking the incumbents’ domain expertise, strategic capital, R&D facilities, supply chain, and pathways to market. We have executed full-scale open innovation challenges for three clients, exceeding the initial proposed goal of two. We also built a diversified opportunity pipeline which resulted in four projects contracted for 2020, meeting the goals of the proposal, with others pending.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Data Archive and Portal (DAP) Platform for Solid Phase Processing Technologies

The scale and speed of data generated by modern scientific experiments have constantly challenged the research community to store, curate, manage and optimally use it to drive scientific discoveries. In this work, we have developed a data archive and portal (DAP) platform including analytics capabilities to collect, curate, and manage data and metadata stream for solid phase processing (SPP) techniques. We successfully hosted around ~347K files of data related to processing parameters, microscopic images, and spectroscopic data related to solid phase processing. The DAP platform for SPP will establish an enduring capability to support machine learning and grow collaboration at the intersection of materials science and data science.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Optimizing Perovskite Thin‐Film Parameter Spaces with Machine Learning‐Guided Robotic Platform for High‐Performance Perovskite Solar Cells

Abstract Simultaneously optimizing the processing parameters of functional thin films remains a challenge. The design and utilization of a fully automated platform called SPINBOT is presented for the engineering of solution‐processed functional thin films. The SPINBOT is capable of performing experiments with high sampling variability through the unsupervised processing of hundreds of substrates with exceptional experimental control. Through the iterative optimization process enabled by the Bayesian optimization (BO) algorithm, the SPINBOT explores an intricate parameter space, continuously improving the quality and reproducibility of the produced thin films. This machine learning (ML)‐guided reliable SPINBOT platform enables the acceleration of the optimization process of perovskite solar cells via a simple photoluminescence characterization of films. As a result, this study arrives at an optimal film that, when processed into a solar cell in an ambient atmosphere, immediately yields a champion power conversion efficiency (PCE) of 21.6% with satisfactory performance reproducibility. The unsealed devices retain 90% of their initial efficiency after 1100 h of continuous operation at 60–65 °C under metal‐halide lamps. It is anticipated that the integration of robotic platforms with the intelligent algorithm will facilitate the widespread adoption of effective autonomous experimentation to address the evolving needs and constraints within the materials science research community.

14 SOLAR ENERGY↗
DOE OSTI2023

Porosity as a Design Element for Developing Catalytic Molecular Materials for Electrochemical and Photochemical Carbon Dioxide Reduction

The catalytic reduction of carbon dioxide (CO 2 ) using sustainable energy inputs is a promising strategy for upcycling of atmospheric carbon into value-added chemical products. This goal has inspired the development of catalysts for selective and efficient CO 2 conversion using electrochemical and photochemical methods. Among the diverse array of catalyst systems designed for this purpose, two- and three-dimensional platforms that feature porosity offer the potential to combine carbon capture and conversion. Included are covalent organic frameworks (COFs), metal-organic frameworks (MOFs), porous molecular cages, and other hybrid molecular materials developed to increase active site exposure, stability, and water compatibility while maintaining precise molecular tunability. This mini-review showcases catalysts for the CO 2 reduction reaction (CO 2 RR) that incorporate well-defined molecular elements integrated into porous materials structures. Selected examples provide insights into how different approaches to this overall design strategy can augment their electrocatalytic and/or photocatalytic CO 2 reduction activity. This article is protected by copyright. All rights reserved.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Final Report

This project focused on investigating the prospects of two-dimensional (2D) materials, transition metal dichalcogenides (TMDs) and graphene, for developing nanostructures that are potentially useful for quantum science. These materials class exhibit a range of fascinating electronic and optical properties and, due to their sub-nanometer thickness, are particularly well suited for confining electronic quantum states in atomic-size structures. The project involved developing first-principles calculations that can predict coherent lifetimes of defects; theoretical schemes for identifying new platforms suitable for studying the dynamics of driven quantum systems; and optical and electronic spectroscopy characterization of novel defects and heterostructures with the aim of creating the next generation of materials for quantum science. This report provides a brief background into the project, highlights some of the major achievements accomplished within the projects and lists the supported publications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗