Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Analysis of Moessbauer Data from Mars: A Database and Artificial Neural Network for Identification of Iron-bearing Phases

The exploration of the planet Mars is one of the major goals within the Solar system exploration programs of the US-American space agency NASA and the European Space Agency ESA. In particular the search for water and life and understanding of the history of the surface and atmosphere will be the major tasks of the upcoming space missions to Mars. The miniaturized Moessbauer spectrometer MIMOS II has been selected for the NASA Mars-Exploration-Rover twin-mission to Mars in 2003 and the ESA 2003 Mars-Express Beagle 2 mission. Reduced in size and weight, in comparison to ordinary laboratory setup, the sensor head just weights approximately 400 g, with a volume of (50x50x90) cu mm, and holds two gamma-ray sources: the stronger for experiments and the weaker for calibrations. The collimator (in sample direction) also shields the primary radiation off the detectors. Around the drive four detectors are mounted. The detectors are made of Si-PIN-photodiodes in chip form (100 sq mm, thickness of 0.5 mm). The control unit is located in a separate electronics board. This board is responsible for the power supply, generation of the drive's velocity reference signal, read of the detector pulses to record the spectrum, data storage and communication with the host computer. After more than four decades from the discovery of the Moessbauer effect, more than 400 minerals were studied at different temperatures. Their Moessbauer parameters were reported in the literature, and have been recently collected in a data bank. Previous Mars-missions, namely Viking and Mars Pathfinder, revealed Si, Al, Fe, Mg, Ca, K, Ti, S and Cl to be the major constituents in soil and rock elemental composition of the red planet. More than 200 minerals already studied by Moessbauer spectroscopy contain significant amounts of these elements. A considerable number of Moessbauer studies were also carried out on meteorites and on Moon samples. Looking backward in the studies of the whole Moessbauer community, we have built a specific library containing Moessbauer parameters of those possible Mars minerals. The selected minerals, their Moessbauer parameter values (min. max. s.d and number of available data), main site substitution, behavior as a function of temperature and a ranking as expected to be found on Mars were organized. Mars-analogue Fe-bearing minerals not studied by Moessbauer spectroscopy are being collected and investigated. In addition, it an identification system based on Artificial Neural Networks (ANN) was implemented which enables fast and precise mineral identification from the experimental Moessbauer parameters at a given temperature.

P A de Souza Jr.↗
NASA NTRS1998

Estimation of Aircraft Nonlinear Unsteady Parameters From Wind Tunnel Data

Aerodynamic equations were formulated for an aircraft in one-degree-of-freedom large amplitude motion about each of its body axes. The model formulation based on indicial functions separated the resulting aerodynamic forces and moments into static terms, purely rotary terms and unsteady terms. Model identification from experimental data combined stepwise regression and maximum likelihood estimation in a two-stage optimization algorithm that can identify the unsteady term and rotary term if necessary. The identification scheme was applied to oscillatory data in two examples. The model identified from experimental data fit the data well, however, some parameters were estimated with limited accuracy. The resulting model was a good predictor for oscillatory and ramp input data.

Klein, Vladislav↗
NASA NTRS1989

An algorithm for attitude identification for SCOLE using two infrared cameras

This report presents an algorithm that incorporates real-time data from two infrared cameras and computes the attitude parameters of the Spacecraft Control Laboratory Experiment (SCOLE), a laboratory apparatus representing an offset-feed antenna attached to the Space Shuttle by a flexible mast. The algorithm utilizes camera position information of three miniature LEDs, mounted on the SCOLE platform, permitting arbitrary camera placement and an on-line attitude extraction. The continuous nature of the algorithm allows identification of the placement of the two cameras with respect to some initial position of the three reference LEDs, followed by on-line six degrees of freedom attitude tracking, regardless of the attitude time history. The report provides a description of the algorithm in the camera identification mode as well as the mode of target tracking. Experimental data from a reduced-size SCOLE-like laboratory model, reflecting the performance of the camera identification and tracking processes, are presented.

Shenhar, J.↗
NASA NTRS1988

Experimental studies in system identification of helicopter rotor dynamics

Recent experiments investigating the system identification of helicopter rotor dynamics are described. The identification makes use of a two-pass procedure that estimates the rotor dynamic states prior to estimation of the dynamic equation parameters. Estimation of the rotor states is made possible through use of the predictive information contained in blade-mounted accelerometers combined with a specialized processing scheme utilizing these signals. Descriptions of the experimental hardware and the system identification technique are given, as well as implementation issues for using the procedure on other similarly instrumented rotor blades. Finally, comparisons with other identification techniques using the same data are presented. It is demonstrated that the approach is an attractive one for measurement of a helicopter rotor's dynamic behavior.

Mckillip, Robert, Jr.↗
DOE OSTI2026

ECLEIRS: Exact conservation law embedded identification of reduced states for parameterized nonlinear conservation laws from sparse and noisy data

Multi-query applications such as parameter estimation, uncertainty quantification and design optimization for parameterized partial differential equation (PDE) systems are expensive. While reduced/latent state dynamics approaches for parameterized PDEs offer a viable alternative, these approaches rely on high-quality data and struggle with highly sparse spatiotemporal noisy measurements typically obtained from experiments. Furthermore, there is no guarantee that these models satisfy governing physical conservation laws. In this article, we propose a reduced state dynamics approach, referred to as ECLEIRS, that embeds exact conservation in the solution and flux representation by utilizing a space-time divergence-free neural network formulation. We compare ECLEIRS with other reduced state dynamics approaches, those that do not enforce any physical constraints and those with physics-informed loss functions, for three shock-propagation problems: 1-D advection, 1-D Burgers and 2-D Euler equations. In conclusion, the numerical experiments conducted in this study demonstrate that ECLEIRS provides the most accurate prediction of dynamics for unseen parameters even in the presence of highly sparse and noisy data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Search for Dark Matter Produced in Association with a Dark Higgs Boson in the b b ¯ Final State Using p p Collisions at s = 13 TeV with the ATLAS Detector

A search is performed for dark matter particles produced in association with a resonantly produced pair of b -quarks with 30 < m b b < 150 GeV using 140 fb − 1 of proton-proton collisions at a center-of-mass energy of 13 TeV recorded by the ATLAS detector at the LHC. This signature is expected in extensions of the standard model predicting the production of dark matter particles, in particular those containing a dark Higgs boson s that decays into b b ¯ . The highly boosted s → b b ¯ topology is reconstructed using jet reclustering and a new identification algorithm. This search places stringent constraints across regions of the dark Higgs model parameter space that satisfy the observed relic density, excluding dark Higgs bosons with masses between 30 and 150 GeV in benchmark scenarios with Z ′ mediator masses up to 4.8 TeV at 95% confidence level. © 2025 CERN, for the ATLAS Collaboration 2025 CERN

Aad, G. (ORCID:0000000266654934)↗
DOE OSTI2023

A bacterial sensor taxonomy across earth ecosystems for machine learning applications

Microbial communities have evolved to colonize all ecosystems of the planet, from the deep sea to the human gut. Microbes survive by sensing, responding, and adapting to immediate environmental cues. This process is driven by signal transduction proteins such as histidine kinases, which use their sensing domains to bind or otherwise detect environmental cues and “transduce” signals to adjust internal processes. We hypothesized that an ecosystem’s unique stimuli leave a sensor “fingerprint,” able to identify and shed insight on ecosystem conditions. To test this, we collected 20,712 publicly available metagenomes from Host-associated, Environmental, and Engineered ecosystems across the globe. We extracted and clustered the collection’s nearly 18M unique sensory domains into 113,712 similar groupings with MMseqs2. We built gradient-boosted decision tree machine learning models and found we could classify the ecosystem type (accuracy: 87%) and predict the levels of different physical parameters (R2 score: 83%) using the sensor cluster abundance as features. Feature importance enables identification of the most predictive sensors to differentiate between ecosystems which can lead to mechanistic interpretations if the sensor domains are well annotated. To demonstrate this, a machine learning model was trained to predict patient’s disease state and used to identify domains related to oxygen sensing present in a healthy gut but missing in patients with abnormal conditions. Moreover, since 98.7% of identified sensor domains are uncharacterized, importance ranking can be used to prioritize sensors to determine what ecosystem function they may be sensing. Furthermore, these new predictive sensors can function as targets for novel sensor engineering with applications in biotechnology, ecosystem maintenance, and medicine.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1974

Attitude control concepts for precision-pointing nonrigid spacecraft

Literal criteria are developed for the controllability and observability of general models of flexible spacecraft. Results are interpreted in special cases and in physical terms, permitting in some cases the identification of uncontrollable and unobservable states simply by examination of scalars composed of modal parameters and location matrices for sensors and actuators. A procedure is established for isolation of uncontrollable states, whereby sensor and actuator configurations assure that uncontrollable flexible mode states are also unobservable; in many applications such states can then be removed by coordinate truncation.

Likins, P. W.↗
NASA NTRS1974

The influence of spacecraft flexibility on system controllability and observability

Literal criteria are developed for the controllability and observability of general models of flexible spacecraft. Results are interpreted in special cases and in physical terms, permitting in some cases the identification of uncontrollable and unobservable states simply by examination of scalars composed of modal parameters and location matrices for sensors and actuators. A procedure is established for isolation of uncontrollable states, whereby sensor and actuator configuration assure that uncontrollable flexible mode states are also unobservable; in many applications such states can then be removed by coordinate truncation.

Ohkami, Y.↗
NASA NTRS1976

Chemical vapor deposition growth

The chemical vapor deposition (CVD) method for the growth of Si sheet on inexpensive substrate materials is investigated. The objective is to develop CVD techniques for producing large areas of Si sheet on inexpensive substrate materials, with sheet properties suitable for fabricating solar cells meeting the technical goals of the Low Cost Silicon Solar Array Project. Specific areas covered include: (1) modification and test of existing CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using standard and near-standard processing techniques.

Ruth, R. P.↗
NASA NTRS1977

F-8C adaptive flight control laws

Three candidate digital adaptive control laws were designed for NASA's F-8C digital flyby wire aircraft. Each design used the same control laws but adjusted the gains with a different adaptative algorithm. The three adaptive concepts were: high-gain limit cycle, Liapunov-stable model tracking, and maximum likelihood estimation. Sensors were restricted to conventional inertial instruments (rate gyros and accelerometers) without use of air-data measurements. Performance, growth potential, and computer requirements were used as criteria for selecting the most promising of these candidates for further refinement. The maximum likelihood concept was selected primarily because it offers the greatest potential for identifying several aircraft parameters and hence for improved control performance in future aircraft application. In terms of identification and gain adjustment accuracy, the MLE design is slightly superior to the other two, but this has no significant effects on the control performance achievable with the F-8C aircraft. The maximum likelihood design is recommended for flight test, and several refinements to that design are proposed.

Hartmann, G. L.↗
NASA NTRS1978

Chemical vapor deposition growth

The objective was to investigate and develop chemical vapor deposition (CVD) techniques for the growth of large areas of Si sheet on inexpensive substrate materials, with resulting sheet properties suitable for fabricating solar cells that would meet the technical goals of the Low Cost Silicon Solar Array Project. The program involved six main technical tasks: (1) modification and test of an existing vertical-chamber CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using impurity diffusion and other standard and near-standard processing techniques supplemented late in the program by the in situ CVD growth of n(+)/p/p(+) sheet structures subsequently processed into experimental cells.

Ruth, R. P.↗
NASA NTRS1982

An identification algorithm for linear stochastic systems with time delays

Linear discrete stochastic control systems containing unknown multiple time delays, plant parameters and noise variances are considered. An algorithm is established which uses the maximum-likelihood technique to identify the unknown parameters. An estimated likelihood function is evaluated based on the previous parameter estimates, which in turn generates a new descent direction vector to update the unknown parameters. The delays and plant parameters are identified in their respective parameter spaces. An example of a second-order stochastic system has been implemented by digital simulation to demonstrate the applicability of the algorithm.

Leondes, C. T.↗
NASA NTRS1984

Interdisciplinary research in global biogeochemical cycling Nitrous oxide in terrestrial ecosystems

NASA has begun an interdisciplinary research program to investigate various aspects of Global Biology and Global Habitability. An important element selected for the study of global phenomena is related to biogeochemical cycling. The studies involve a collaboration with recognized scientists in the areas of plant physiology, microbiology, nutrient cycling theory, and related areas. Selected subjects of study include nitrogen cycling dynamics in terrestrial ecosystems with special attention to biosphere/atmosphere interactions, and an identification of sensitive response variables which can be used in ecosystem models based on parameters derived from remotely sensed variables. A description is provided of the progress and findings over the past two years. Attention is given to the characteristics of nitrous oxide emissions, the approach followed in the investigations, the selection of study sites, radiometric measurements, and research in Sequoia.

Norman, S. D.↗
NASA NTRS1988

A brief review on the identification of nonlinear mechanical systems

This paper presents a brief review of the disciplines used in the identification of nonlinear mechanical systems, including the detection of nonlinearities and their quantification, and parameter estimation. Techniques for determining the parameters of nonlinear system models with assumed model form are described and briefly discussed. Recent developments in identifying system models which may contain the actual model forms as well as incorrect forms is also briefly described. A list of representative references from structures and control disciplines is given.

Natke, H. G.↗
NASA NTRS1990

Software reliability through fault-avoidance and fault-tolerance

The use of back-to-back, or comparison, testing for regression test or porting is examined. The efficiency and the cost of the strategy is compared with manual and table-driven single version testing. Some of the key parameters that influence the efficiency and the cost of the approach are the failure identification effort during single version program testing, the extent of implemented changes, the nature of the regression test data (e.g., random), and the nature of the inter-version failure correlation and fault-masking. The advantages and disadvantages of the technique are discussed, together with some suggestions concerning its practical use.

Vouk, Mladen A.↗
NASA NTRS1992

Multivariable frequency domain identification via 2-norm minimization

The author develops a computational approach to multivariable frequency domain identification, based on 2-norm minimization. In particular, a Gauss-Newton (GN) iteration is developed to minimize the 2-norm of the error between frequency domain data and a matrix fraction transfer function estimate. To improve the global performance of the optimization algorithm, the GN iteration is initialized using the solution to a particular sequentially reweighted least squares problem, denoted as the SK iteration. The least squares problems which arise from both the SK and GN iterations are shown to involve sparse matrices with identical block structure. A sparse matrix QR factorization method is developed to exploit the special block structure, and to efficiently compute the least squares solution. A numerical example involving the identification of a multiple-input multiple-output (MIMO) plant having 286 unknown parameters is given to illustrate the effectiveness of the algorithm.

Bayard, David S.↗
NASA NTRS1993

Investigation for improving Global Positioning System (GPS) orbits using a discrete sequential estimator and stochastic models of selected physical processes

GEODYNII is a conventional batch least-squares differential corrector computer program with deterministic models of the physical environment. Conventional algorithms were used to process differenced phase and pseudorange data to determine eight-day Global Positioning system (GPS) orbits with several meter accuracy. However, random physical processes drive the errors whose magnitudes prevent improving the GPS orbit accuracy. To improve the orbit accuracy, these random processes should be modeled stochastically. The conventional batch least-squares algorithm cannot accommodate stochastic models, only a stochastic estimation algorithm is suitable, such as a sequential filter/smoother. Also, GEODYNII cannot currently model the correlation among data values. Differenced pseudorange, and especially differenced phase, are precise data types that can be used to improve the GPS orbit precision. To overcome these limitations and improve the accuracy of GPS orbits computed using GEODYNII, we proposed to develop a sequential stochastic filter/smoother processor by using GEODYNII as a type of trajectory preprocessor. Our proposed processor is now completed. It contains a correlated double difference range processing capability, first order Gauss Markov models for the solar radiation pressure scale coefficient and y-bias acceleration, and a random walk model for the tropospheric refraction correction. The development approach was to interface the standard GEODYNII output files (measurement partials and variationals) with software modules containing the stochastic estimator, the stochastic models, and a double differenced phase range processing routine. Thus, no modifications to the original GEODYNII software were required. A schematic of the development is shown. The observational data are edited in the preprocessor and the data are passed to GEODYNII as one of its standard data types. A reference orbit is determined using GEODYNII as a batch least-squares processor and the GEODYNII measurement partial (FTN90) and variational (FTN80, V-matrix) files are generated. These two files along with a control statement file and a satellite identification and mass file are passed to the filter/smoother to estimate time-varying parameter states at each epoch, improved satellite initial elements, and improved estimates of constant parameters.

Goad, Clyde C.↗