Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOEMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Low energy electron attenuation lengths in core–shell nanoparticles

Here, a velocity map imaging spectrometer is used to measure photoemission from free core–shell nanoparticles, where a salt core is coated with a liquid hydrocarbon shell (i.e. squalane). By varying the radial thickness of the hydrocarbon shell, electron attenuation lengths (EALs) are determined by measuring the decay in photoemission intensity from the salt core. In squalane, electrons with kinetic energy (KE) above 2 eV are found to have EALs of 3–5 nm, whereas electrons with smaller KE (<2 eV) have significantly larger EALs of >15 nm. These results (in the context of other energy-resolved EAL measurements) suggest that the energy dependent behavior of low energy electrons is similar in dielectrics when KE > 2 eV. At this energy the EALs do not appear to exhibit strong energy dependence. However, at very low KE (<2 eV), the EALs diverge and appear to be extremely material dependent.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Epitaxial growth of (1 1 1)-oriented spinel CoCr 2 O 4 /Al 2 O 3 heterostructures

High quality (1 1 1)-oriented CoCr 2 O 4 /Al 2 O 3 heterostructures were synthesized on the sapphire (0 0 0 1) single crystal substrates by pulsed laser deposition. The structural properties are demonstrated by in-situ reflection high energy electron diffraction, atomic force microscopy, X-ray reflectivity, and X-ray diffraction. X-ray photoemission spectroscopy confirms that the films possess the proper chemical stoichiometry. In conclusion, this work offers a pathway to fabricating spinel type artificial quasi-two-dimensional frustrated lattices by means of geometrical engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of interfacial structures on spin dependent tunneling in epitaxial L1{sub 0}-FePt/MgO/FePt perpendicular magnetic tunnel junctions

Epitaxial FePt(001)/MgO/FePt magnetic tunnel junctions with L1{sub 0}-FePt electrodes showing perpendicular magnetic anisotropy were fabricated by molecular beam epitaxial growth. Tunnel magnetoresistance ratios of 21% and 53% were obtained at 300 K and 10 K, respectively. Our previous work, based on transmission electron microscopy, confirmed a semi-coherent interfacial structure with atomic steps (Kohn et al., APL 102, 062403 (2013)). Here, we show by x-ray photoemission spectroscopy and first-principles calculation that the bottom FePt/MgO interface is either Pt-terminated for regular growth or when an Fe layer is inserted at the interface, it is chemically bonded to O. Both these structures have a dominant role in spin dependent tunneling across the MgO barrier resulting in a decrease of the tunneling magnetoresistance ratio compared with previous predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orbital alignment at the internal interface of arylthiol functionalized CdSe molecular hybrids

Organic-inorganic nanoparticle molecular hybrid materials are interesting candidates for improving exciton separation in organic solar cells. The orbital alignment at the internal interface of cadmium selenide (ArS-CdSe) hybrid materials functionalized with covalently attached arylthiolate moieties was investigated through X-ray photoemission spectroscopy (XPS) and ultraviolet photoemission spectroscopy (UPS). A physisorbed interface between arylthiol (ArSH) ligands and CdSe nanoparticles was also investigated for comparison. This interface was created via a multi-step thin film deposition procedure in-vacuo, where the surface was characterized after each experimental step. This enabled the direct comparison of ArSH/CdSe interfaces produced via physisorption and ArS-CdSe covalently attached hybrid materials, which rely on a chemical reaction for their synthesis. All material depositions were performed using an electrospray deposition, which enabled the direct injection of solution-originating molecular species into the vacuum system. This method allows XPS and UPS measurements to be performed immediately after deposition without exposure to the atmosphere. Transmission electron microscopy was used to determine the morphology and particle size of the deposited materials. Ultraviolet-visible spectroscopy was used to estimate the optical band gap of the CdSe nanoparticles and the HOMO-LUMO gap of the ArSH ligands. These experiments showed that hybridization via covalent bonds results in an orbital realignment at the ArSH/CdSe interface in comparison to the physisorbed interface. The orbital alignment within the hybrid caused a favorable electron injection barrier, which likely facilitates exciton-dissociation while preventing charge-recombination.

36 MATERIALS SCIENCE↗

Interfacial electronic structure at the CH{sub 3}NH{sub 3}PbI{sub 3}/MoO{sub x} interface

Interfacial electronic properties of the CH{sub 3}NH{sub 3}PbI{sub 3} (MAPbI{sub 3})/MoO{sub x} interface are investigated using ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. It is found that the pristine MAPbI{sub 3} film coated onto the substrate of poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate)/indium tin oxide by two-step method behaves as an n-type semiconductor, with a band gap of ∼1.7 eV and a valence band edge of 1.40 eV below the Fermi energy (E{sub F}). With the MoO{sub x} deposition of 64 Å upon MAPbI{sub 3}, the energy levels of MAPbI{sub 3} shift toward higher binding energy by 0.25 eV due to electron transfer from MAPbI{sub 3} to MoO{sub x}. Its conduction band edge is observed to almost pin to the E{sub F}, indicating a significant enhancement of conductivity. Meanwhile, the energy levels of MoO{sub x} shift toward lower binding energy by ∼0.30 eV, and an interface dipole of 2.13 eV is observed at the interface of MAPbI{sub 3}/MoO{sub x}. Most importantly, the chemical reaction taking place at this interface results in unfavorable interface energy level alignment for hole extraction. A potential barrier of ∼1.36 eV observed for hole transport will impede the hole extraction from MAPbI{sub 3} to MoO{sub x}. On the other hand, a potential barrier of ∼0.14 eV for electron extraction is too small to efficiently suppress electrons extracted from MAPbI{sub 3} to MoO{sub x}. Therefore, such an interface is not an ideal choice for hole extraction in organic photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoinduced reduction of surface states in Fe:ZnO

We report on the electronic structure of nano-crystalline Fe:ZnO, which has recently been found to be an efficient photocatalyst. Using resonant photoemission spectroscopy, we determine the binding energy of Fe 3d states corresponding to different valencies and coordination of the Fe atoms. The photo-activity of ZnO reduces Fe from 3+ to 2+ in the surface region of the nano-crystalline material due to the formation of oxygen vacancies. Electronic states corresponding to low-spin Fe{sup 2+} are observed and attributed to crystal field modification at the surface. These states are potentially important for the photocatalytic sensitivity to visible light due to their location deep in the ZnO bandgap. X-ray absorption and x-ray photoemission spectroscopy suggest that Fe is only homogeneously distributed for concentrations up to 3%. Increased concentrations does not result in a higher concentration of Fe ions in the surface region. This is limiting the photocatalytic functionality of ZnO, where the most efficient Fe doping concentration has been shown to be 1%-4%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure evolution in doping of fullerene (C{sub 60}) by ultra-thin layer molybdenum trioxide

Ultra-thin layer molybdenum oxide doping of fullerene has been investigated using ultraviolet photoemission spectroscopy (UPS) and X-ray photoemission spectroscopy (XPS). The highest occupied molecular orbital (HOMO) can be observed directly with UPS. It is observed that the Fermi level position in fullerene is modified by ultra-thin-layer molybdenum oxide doping, and the HOMO onset is shifted to less than 1.3 eV below the Fermi level. The XPS results indicate that charge transfer was observed from the C{sub 60} to MoO{sub x} and Mo{sup 6+} oxides is the basis as hole dopants.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Many-body ab initio diffusion quantum Monte Carlo applied to the strongly correlated oxide NiO

We present a many-body diffusion quantum Monte Carlo (DMC) study of the bulk and defect properties of NiO. We find excellent agreement with experimental values, within 0.3%, 0.6%, and 3.5% for the lattice constant, cohesive energy, and bulk modulus, respectively. The quasiparticle bandgap was also computed, and the DMC result of 4.72 (0.17) eV compares well with the experimental value of 4.3 eV. Furthermore, DMC calculations of excited states at the L, Z, and the gamma point of the Brillouin zone reveal a flat upper valence band for NiO, in good agreement with Angle Resolved Photoemission Spectroscopy results. To study defect properties, we evaluated the formation energies of the neutral and charged vacancies of oxygen and nickel in NiO. A formation energy of 7.2 (0.15) eV was found for the oxygen vacancy under oxygen rich conditions. For the Ni vacancy, we obtained a formation energy of 3.2 (0.15) eV under Ni rich conditions. These results confirm that NiO occurs as a p-type material with the dominant intrinsic vacancy defect being Ni vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of the electronic structure of C{sub 60}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} interface

The evolution of the electronic structure at the interface between fullerene (C{sub 60}) and La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO) has been investigated with ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. There is a 0.61 eV barrier for the electrons to be injected from LSMO to C{sub 60}. The energy bands keep bending upward with increasing C{sub 60} thickness. A total energy bending of 0.72 eV is observed, changing the C{sub 60} film from n-type to p-type. The n-p transition is ascribed to the diffusion of oxygen from LSMO to C{sub 60} which subsequently strips electrons from C{sub 60}, making the latter p-type. Our results suggest a buffer layer be inserted between the LSMO and C{sub 60} to lower the interface electron barrier and prevent deterioration of the C{sub 60} film in related spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Orientation-dependent energy level alignment and film growth of 2,7-diocty[1]benzothieno[3,2-b]benzothiophene (C8-BTBT) on HOPG

Combining ultraviolet photoemission spectroscopy, X-ray photoemission spectroscopy, atomic force microscopy, and X-ray diffraction measurements, we performed a systematic investigation on the correlation of energy level alignment, film growth, and molecular orientation of 2,7-diocty[1]benzothieno[3,2-b]benzothiophene (C8-BTBT) on highly oriented pyrolytic graphite. The molecules lie down in the first layer and then stand up from the second layer. The ionization potential shows a sharp decrease from the lying down region to the standing up region. When C8-BTBT molecules start standing up, unconventional energy level band-bending-like shifts are observed as the film thickness increases. These shifts are ascribed to gradual decreasing of the molecular tilt angle about the substrate normal with the increasing film thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of deuterium density profiles in the H-mode steep gradient region using charge exchange recombination spectroscopy on DIII-D

Recent completion of a thirty two channel main-ion (deuterium) charge exchange recombination spectroscopy (CER) diagnostic on the DIII-D tokamak enables detailed comparisons between impurity and main-ion temperature, density, and toroidal rotation. In a H-mode DIII-D discharge, these new measurement capabilities are used to provide the deuterium density profile, demonstrate the importance of profile alignment between Thomson scattering and CER diagnostics, and aid in determining the electron temperature at the separatrix. Sixteen sightlines cover the core of the plasma and another sixteen are densely packed towards the plasma edge, providing high resolution measurements across the pedestal and steep gradient region in H-mode plasmas. Extracting useful physical quantities such as deuterium density is challenging due to multiple photoemission processes. Finally, these challenges are overcome using a detailed fitting model and by forward modeling the photoemission using the FIDASIM code, which implements a comprehensive collisional radiative model. Published by AIP Publishing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Soft X-ray spectroscopy of nanoparticles by velocity map imaging

Velocity map imaging (VMI), a technique traditionally used to study chemical dynamics in the gas phase, is applied to study X-ray photoemission from aerosol nanoparticles. Soft X-rays from the Advanced Light Source synchrotron, probe a beam of nanoparticles, and the resulting photoelectrons are velocity mapped to obtain their kinetic energy distributions. A new design of the VMI spectrometer is described. The spectrometer is benchmarked by measuring vacuum ultraviolet photoemission from gas phase xenon and squalene nanoparticles followed by measurements using soft X-rays. It is demonstrated that the photoelectron distribution from X-ray irradiated squalene nanoparticles is dominated by secondary electrons. By scanning the photon energies and measuring the intensities of these secondary electrons, a near edge X-ray absorption fine structure (NEXAFS) spectrum is obtained. The NEXAFS technique is used to obtain spectra of aqueous nanoparticles at the oxygen K edge. By varying the position of the aqueous nanoparticle beam relative to the incident X-ray beam, evidence is presented such that the VMI technique allows for NEXAFS spectroscopy of water in different physical states. Finally, we discuss the possibility of applying VMI methods to probe liquids and solids via X-ray spectroscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗

Irreversible metal-insulator transition in thin film VO 2 induced by soft X-ray irradiation

In this study, we show the ability of soft x-ray irradiation to induce room temperature metal-insulator transitions (MITs) in VO 2 thin films grown on R-plane sapphire. The ability of soft x-rays to induce MIT in VO 2 thin films is confirmed by photoemission spectroscopy and soft x-ray spectroscopy measurements. When irradiation was discontinued, the systems do not return to the insulating phase. Analysis of valence band photoemission spectra revealed that the density of states (DOSs) of the V 3d band increased with irradiation time, while the DOS of the O 2p band decreased. We use these results to propose a model in which the MIT is driven by oxygen desorption from thin films during irradiation. As a strongly correlated transition metal oxide, VO 2 is an interesting and valuable material both for expanding our understanding of fundamental physics and for potential applications due to its particular metal-insulator transition (MIT). At 340 K, the resistance of bulk VO 2 exhibits a large jump (up to 5 orders of magnitude), accompanied by first order crystal phase transition from a room temperature monoclinic phase to a high temperature tetragonal phase.1,2 The origin of the MIT has been widely discussed since electron–phonon interaction (Peierls type) or electron–electron interaction (Mott–Hubbard type) could play a key role in inducing the occurrence of the MIT.3–7 Furthermore, these characteristics of the VO 2 .

36 MATERIALS SCIENCE↗

Controlling the surface photovoltage on WSe 2 by surface chemical modification

The surface photovoltage (SPV) effect is key to the development of opto-electronic devices such as solar-cells and photo-detectors. For the prototypical transition metal dichalcogenide WSe 2 , core level and valence band photoemission measurements show that the surface band bending of pristine cleaved surfaces can be readily modified by adsorption with K (an electron donor) or C 60 (an electron acceptor). Time-resolved pump-probe photoemission measurements reveal that the SPV for pristine cleaved surfaces is enhanced by K adsorption, but suppressed by C 60 adsorption, and yet the SPV relaxation time is substantially shortened in both cases. Evidently, adsorbate-induced electronic states act as electron-hole recombination centers that shorten the carrier lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast time-resolved extreme ultraviolet (XUV) photoelectron spectroscopy of hole transfer in a Zn/n-GaP Schottky junction

The addition of a metal overlayer to a semiconductor photocatalyst is a frequently used synthetic route to passivate the surface and, via the formation of a Schottky barrier, to enhance catalytic activity of the photocatalyst material. While it is known that Schottky junctions decrease recombination by charge separation, measurements of the depletion region dynamics have remained elusive. Here, we use ultrafast pump-probe transient photoelectron spectroscopy to measure material-specific dynamics of the Zn/n-GaP(100) system. Through photoemission measurements the Schottky barrier height is determined to be 2.1± 0.1eV at 10 monolayers of total Zn deposition. Transient photoemission measurements utilizing a 400 nm pump pulse show that, after excitation, holes are transferred from n-GaP(100) to the Zn overlayer within a few ps, as evidenced by shifts of the Zn 3d and Ga 3d core levels to higher binding energies. Within the timescale of the experiment (130 ps) no carrier recombination is observed in the junction. Furthermore, a long-lived surface photovoltage signal is observed at times >1 ms after photoexcitation. This work further exemplifies the potential of transient extreme ultraviolet photoelectron spectroscopy as a material-specific technique for the study of heterojunctions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and electronic properties of Fe dopants in cobalt oxide nanoislands on Au(111)

Mixed metal oxides of earth-abundant 3$d$ transition metals are an interesting class of materials that show interesting magnetic properties and a significant synergistic effect as catalysts for electrochemical oxygen evolution compared to simple unary oxides. However, the exact atomic-scale nature of such mixed oxide phases and the link to their interesting physico-chemical properties are poorly understood. Here, a combination of scanning tunneling microscopy and x-ray photoemission spectroscopy reveals that Fe species embed in a facile way into CoO bilayers on Au(111) resulting in an Fe doped oxide. Density functional theory and the spectroscopic fingerprint from x-ray photoemission spectroscopy reveal that the Fe dopants in the cobalt oxide matrix assume a higher oxidation state than in the structurally corresponding unary bilayer oxide. Furthermore, the substituted Fe is structurally displaced further away from the Au than the metal in either of the corresponding pure unary oxides. Both O and to a smaller extent Co in the nearest coordination shell are also structurally and electronically perturbed. The interesting effects observed in the bilayer binary oxides may enable a better fundamental understanding of the nature of doping of metal oxides, in general, and promotion effects in catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transition from electron accumulation to depletion at $β$-Ga 2 O 3 surfaces: The role of hydrogen and the charge neutrality level

The surface electronic properties of bulk-grown $β$-Ga 2 O 3 ($\overline{2}01$) single crystals are investigated. The band gap is found using optical transmission to be 4.68 eV. High-resolution x-ray photoemission coupled with hybrid density functional theory calculation of the valence band density of states provides insights into the surface band bending. Importantly, the standard linear extrapolation method for determining the surface valence band maximum (VBM) binding energy is found to underestimate the separation from the Fermi level by ~0.5 eV. According to our interpretation, most reports of surface electron depletion and upward band bending based on photoemission spectroscopy actually provide evidence of surface electron accumulation. For uncleaned surfaces, the surface VBM to Fermi level separation is found to be 4.95 ± 0.10 eV, corresponding to downward band bending of ~0.24 eV and an electron accumulation layer with a sheet density of ~5 × 10 12 cm –2 . Uncleaned surfaces possess hydrogen termination which acts as surface donors, creating electron accumulation and downward band bending at the surface. In situ cleaning by thermal annealing removes H from the surface, resulting in a ~0.5 eV shift of the surface VBM and formation of a surface electron depletion layer with upward band bending of ~0.26 eV due to native acceptor surface states. These results are discussed in the context of the charge neutrality level, calculated bulk interstitial hydrogen transition levels, and related previous experimental findings.

36 MATERIALS SCIENCE↗