Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Examination of Through-Thickness/Through-Time Phase Evolution during an MOD-Type REBCO Precursor Conversion Using Raman Microsscopy

Through-thickness/through-time composition analyses were made on REBa{sub 2}Cu{sub 3}O{sub 6+x} (REBCO) films prepared from metal-organic deposited (MOD) precursors on a RABiTS (rolling-assisted biaxially textured substrate) template. Y Dy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 6 + x} films were fabricated either by a single precursor coating or by two separate, equivalent precursor coatings with an intermediate decomposition. Specimens were quenched at selected times along a heat treatment profile that simulated conditions used by American Superconductor, then examined by Raman microscopy along mechanically milled slopes through the REBCO films. Upon reaching the reaction temperature TR, the precursor initially transforms into a (Y, Dy){sub 2}Cu{sub 2}O{sub 5}, CuO, Cu{sub 2}O, and RE-Ba-F-O phase mix, and this is followed shortly by substrate level REBCO formation that propagates upwards through time. Our results indicate that (1) the single layer (SL) and double layer (DL) films (both {approx} 1.2 {mu}m thick) react to completion at about the same rate and arrive at a similar final composition and (2) some residual Ba-Cu-O phases persist near the top of the fully reacted films. The performance of the SL film was moderately better than that of the DL film, seemingly due to better through-thickness REBCO texture as determined using x-ray diffraction.

36 MATERIALS SCIENCE↗

Thermal effect on prebunched two-beam free electron laser

A numerical simulation in one-dimension is conducted to study the two-beam free electron laser. The fundamental resonance of the fast electron beam coincides with the fifth harmonic of the slow electron beam in order to generate extreme ultraviolet radiation. Thermal effect in the form of the longitudinal velocity spread is included in the analysis. In order to reduce the length of the wiggler, prebunched slow electron beam is considered. The evaluation of the radiation power, bunching parameter, distribution function of energy, and the distribution function of the pondermotive phase is studied. Sensitivity of the power of the fifth harmonic to the jitter in the energy difference between the two beams is also studied. A phase space is presented that shows the trapped electrons at the saturation point.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High voltage testing for the Majorana Demonstrator

The Majorana Collaboration is constructing theMajorana Demonstrator, an ultra-low background, 44-kg modular high-purity Ge (HPGe) detector array to search for neutrinoless double-beta decay in 76Ge. The phenomenon of surface micro-discharge induced by high-voltage has been studied in the context of theMajorana Demonstrator. This effect can damage the front-end electronics or mimic detector signals. To ensure the correct performance, every high-voltage cable and feedthrough must be capable of supplying HPGe detector operating voltages as high as 5 kV without exhibiting discharge. R&D measurements were carried out to understand the testing system and determine the optimum design configuration of the high-voltage path, including different improvements of the cable layout and feedthrough flange model selection. Every cable and feedthrough to be used at the Majorana Demonstrator was characterized and the micro-discharge effects during theMajorana Demonstrator commissioning phase were studied. A stable configuration has been achieved, and the cables and connectors can supply HPGe detector operating voltages without exhibiting discharge.

high-voltage↗

Effects of 90 deg. vertical elbows on two-phase flow parameters

This study investigates two-phase flow from vertical-upward to horizontal and horizontal to vertical-downward direction through 90 deg. vertical elbows. Specifically, effects of 90 deg. vertical elbows on two-phase pressure drop, development of bubble distribution, and one-dimensional transport of bubble velocity are studied. Pressure measurements are obtained along the test section over a wide range of flow conditions. The two-phase pressure drops across the elbows are modeled using the modified Lockhart-Martinelli correlation which accounts for the minor loss effect. It is demonstrated that the modified Lockhart-Martinelli correlation can predict the pressure loss across elbows with different orientations and angles by varying the minor loss coefficient. A database is established by measuring two-phase flow parameters across 90 deg. vertical elbows using a four-sensor conductivity probe. It is found that immediately downstream of the 90 deg. vertical-upward elbow, the bubbles have a bimodal distribution along the horizontal radius of the pipe cross-section causing a dual-peak in the profiles of local void fraction and interfacial area concentration. As the flow develops, the bimodal bubble distribution dissipates and develops to a single-peaked bubble distribution near the top of the pipe. Immediately downstream of the 90 deg. vertical-downward elbow, a bimodal bubble distribution is also observed near the inner curvature of the elbow. As the flow develops, the bimodal bubble distribution migrates to the pipe center and finally develops to a characteristic center-peaked bubble distribution. For the area averaged void-weighted bubble velocity, it varies significantly in the elbow regions due to the changes in local velocity profile and bubble distribution caused by the elbow effects. (authors)

42 ENGINEERING↗

Phase diagram of the triangular-lattice Potts antiferromagnet

Here, we study the phase diagram of the triangular-lattice Q-state Potts model in the real $(Q, v)$ -plane, where $v={\rm e}^J-1$ is the temperature variable. Our first goal is to provide an obviously missing feature of this diagram: the position of the antiferromagnetic critical curve. This curve turns out to possess a bifurcation point with two branches emerging from it, entailing important consequences for the global phase diagram. We have obtained accurate numerical estimates for the position of this curve by combining the transfer-matrix approach for strip graphs with toroidal boundary conditions and the recent method of critical polynomials. The second goal of this work is to study the corresponding $A_{p-1}$ RSOS model on the torus, for integer $p=4, 5, \ldots, 8$ . We clarify its relation to the corresponding Potts model, in particular concerning the role of boundary conditions. For certain values of p, we identify several new critical points and regimes for the RSOS model and we initiate the study of the flows between the corresponding field theories.

97 MATHEMATICS AND COMPUTING↗

Microstructural study of transient liquid phase bonded DD98 and K465 superalloys at high temperature

Microstructure of a transient liquid phase (TLP) bonded joint between single crystal DD98 and polycrystalline K465 superalloys was investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. After bonding at 1190 deg. C for 2 h, many phases formed in the centerline of the bonding zone due to an incompletely solidified liquid interlayer. There are script-like, tree-like and blocky compounds besides solid solution {gamma} phase in this region. The script-like phase is CrB boride that is rich in Cr, the tree-like compound rich in Ni is M{sub 23}B{sub 6} with FCC structure, and the blocky phase enriched in Ti, Ta, and Nb, is MC carbide that resulted from the interdiffusion of C atoms between dissimilar base metals. After TLP bonding, many blocky and fine M{sub 6}C particles rich in Cr and W appeared in the diffusion zone of the K465 side. A number of blocky and platelet M{sub 3}B{sub 2} borides rich in W, Cr and Mo precipitated in the diffusion zone of the DD98 side. - Research Highlights: {yields} DD98 and K465 alloy was TLP bonded. {yields} The microstructure changes of different parts were studied. {yields} CrB, M{sub 23}B{sub 6} and MC formed in the bonding zone. {yields} M{sub 6}C appeared in diffusion zone of K465 side and M{sub 3}B{sub 2} existed in diffusion zone of DD98 side.

36 MATERIALS SCIENCE↗

Infrared spectroscopy study of the nodal-line semimetal candidate ZrSiTe under pressure: Hints for pressure-induced phase transitions

We studied the effect of external pressure on the optical response of the nodal-line semimetal candidate ZrSiTe by reflectivity measurements. At pressures of a few GPa, the reflectivity, optical conductivity, and loss function are strongly affected in the whole measured frequency range (200–16 500 cm –1 ), indicating drastic changes in the electronic band structure. The pressure-induced shift of the electronic bands affects both the intraband and interband transitions. Here, we find anomalies in the pressure dependence of several optical parameters at the pressures P c1 ≈ 4.1GPa and P c2 ≈ 6.5GPa, suggesting the occurrence of two phase transitions of either structural or electronic type.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial stabilization and phase instability of VO 2 polymorphs

The VO 2 polymorphs, i.e., VO 2 (A), VO 2 (B), VO 2 (M1) and VO 2 (R), have a wide spectrum of functionalities useful for many potential applications in information and energy technologies. However, synthesis of phase pure materials, especially in thin film forms, has been a challenging task due to the fact that the VO 2 polymorphs are closely related to each other in a thermodynamic framework. Here, we report epitaxial stabilization of the VO 2 polymorphs to synthesize high quality single crystalline thin films and study the phase stability of these metastable materials. We selectively deposit all the phases on various perovskite substrates with different crystallographic orientations. By investigating the phase instability, phonon modes and transport behaviours, not only do we find distinctively contrasting physical properties of the VO 2 polymorphs, but that the polymorphs can be on the verge of phase transitions when heated as low as ~400 °C. In conclusion, our successful epitaxy of both VO 2 (A) and VO 2 (B) phases, which are rarely studied due to the lack of phase pure materials, will open the door to the fundamental studies of VO 2 polymorphs for potential applications in advanced electronic and energy devices.

36 MATERIALS SCIENCE↗

Synthesis, phase transition and photoluminescence studies on Eu{sup 3+}-substituted double perovskites-A novel orange-red phosphor for solid-state lighting

Photoluminescence studies on Eu{sup 3+}-doped double perovskites with the formula A{sub 2}CaWO{sub 6} (A=Sr, Ba) revealed that the forced electric dipole (ED) transition is present when Eu{sup 3+} is substituted at the non-centrosymmetric Sr-site vis-a-vis substitution at the centrosymmetric Ca-site shows both ED and magnetic dipole (MD) transition. A series of novel orange-red-emitting phosphor compositions Sr{sub 1.9-x}Ba{sub x}Eu{sub 0.05}Li{sub 0.05}CaWO{sub 6} (x=0-1.9) have also been synthesized and characterized by powder X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS) and photoluminescence. XRD results reveal a phase transition from monoclinic to pseudo-cubic structure for x{<=}0.2. All the compositions show broad charge transfer band and orange-red (MD and ED) emission. However, the relative intensity of the MD and ED depends on the Ba content present in the host lattice. Select compositions in this system of compounds could find potential application as orange-red phosphors for white light generation using blue/near-UV GaN-based light-emitting diodes (LEDs). - Graphical abstract: A series of orange-red-emitting A{sub 2}CaWO{sub 6} (A=Sr, Ba) and Sr{sub 1.9-x}Ba{sub x}Eu{sub 0.05}Li{sub 0.05}MoO{sub 6} (x=0-1.9) phosphor with double perovskite structure have been synthesized by solid-state reaction. All the compositions show broad charge transfer band and orange-red [magnetic dipole (MD) and electric dipole (ED)] emission. The red emission of Sr{sub 1.5}Eu{sub 0.05}Li{sub 0.05}Ba{sub 0.4}CaWO{sub 6} is found to be {approx}4.5 times higher than that of commercial red phosphor (Nichia) under 465 nm excitation and hence this phosphor could be a potential candidate for white LED based on blue/NUV GaN LED.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transitions of LiAlO{sub 2} at high pressure and high temperature

This work presents a comprehensive study on phase transitions in LiAlO{sub 2} system at high pressures and temperatures (0.5-5.0 GPa and 300-1873 K, respectively), as well as the phase stability for polymeric phases of LiAlO{sub 2} in the studied P-T space by X-ray diffraction (XRD). Besides the previously described polymorphic hexagonal {alpha}-phase, orthorhombic {beta}-phase and tetragonal {delta}-phase, a possible new phase of LiAlO{sub 2} was observed after the tetragonal {gamma}-LiAlO{sub 2} sample was treated at 5.0 GPa and 389 K. The stable regimes of these high-pressure phases were defined through the observation of coexistence points of the polymeric phases. Our results revealed that LiAlO{sub 2} could experience structural phase transitions from {gamma}-LiAlO{sub 2} to its polymorphs at lower pressures and temperatures compared to the reported results. Hexagonal {alpha}-LiAlO{sub 2} with highly (003) preferential orientation was prepared at 5.0 GPa and 1873 K. - Graphical abstract: Constructing the pressure-temperature phase diagram for LiAlO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and theoretical high pressure study of calcium hydroxyaluminate phases

Five calcium hydroxyaluminate phases have been investigated by synchrotron powder diffraction at high-pressure: two hydrogarnets, kuzelite, stratlingite and ettringite. The obtained bulk modulus, K{sub 0}, for kuzelite, stratlingite and ettringite were 23(1), 27(1) and 30(3) GPa, respectively. Kuzelite and stratlingite underwent transformations above 1 GPa likely releasing interlayer water. Kuzelite becoming markedly amorphous and stratlingite remained crystalline, K{sub 0} = 58(6) GPa in the 1.5–5.5 GPa pressure range. The structural behavior for hydrogarnet samples is prone to the use of pressure transmitting media. K{sub 0} for Ca{sub 3}Al{sub 2}(OH){sub 12} was 81(2) and 76(2) GPa for silicone oil and alcohol mixture, respectively. A similar study for Ca{sub 3}Al{sub 1.7}Fe{sub 0.3}(OH){sub 12} yielded 73(1) and 58(1) GPa for silicone oil and alcohol mixture, respectively. Atomistic calculations using periodic Density Functional Theory showed that the softening in iron-doped katoite, when compared to stoichiometric katoite, can be assigned primarily to greater compressibility of Ca−O dodecahedra, which overcompensates strengthening of hydrogen bonding between Al/Fe hydroxide groups.

36 MATERIALS SCIENCE↗

UV/Near-IR Aerosol Absorption Monitor

In this DOE SBIR Phase I study, we have designed and constructed two prototypes demonstrating proof of concept for a new aerosol measurement instrument: a UV/near-IR aerosol absorption monitor. One prototype operates at 360nm and the other at 1064nm. From the laboratory testing and evaluation, we obtained the following technical specifications for the two prototypes: (A) Photoacoustic measurements of aerosol light absorption at 360nm and 1064 nm; (B) Detection limit of 1.0 Mm-1 in 10s-averaging and 0.36 Mm-1 in 100s at 1064nm; (C) Detection limit of 9 Mm-1 in 10s at 360nm; (D) Time response of 4.3 ± 0.6 s, using the 90% criteria; (E) Linear dynamic range from 0.36 Mm to 250 Mm-1 at 1064nm; (F) Sample flow rate of 0.5-2.0 liter per minute; (G) Continuous measurement at 1s sampling rate; (H) An aerosol-based calibration approach; (I) Dimension of 56cm×43cm×25cm and 25kg for the near-IR prototype; while 66cm×43cm×38cm and 30kg for the UV prototype. In this Phase I study, we changed the modulation approach applied to the UV prototype to improve its detection sensitivity. Using an optical chopper to chop the laser beam instead of the electronic modulation on its power supply, we were able to increase the effective laser power and thereby improve the sensitivity by a factor of 2.1. However there is a tradeoff of utilizing a chopper. This approach can only produce a single modulation frequency, presenting an obstacle to combining the UV and near-IR aerosol absorption monitors into a single two-wavelength measurement instrument. Given that the near-IR prototype meets all the desired technical specifications from the DoE SBIR program, this instrument will be ready to be commercialized in the Phase II program. On the other hand, in addition to a different modulation scheme from the near-IR model, the UV aerosol absorption monitor needs some improvements to achieve the desired technical objective in measurement sensitivity. Thus the future Phase II program would primarily focus on improving the UV model and developing both the UV and near-IR aerosol absorption monitors into standalone commercial products.

54 ENVIRONMENTAL SCIENCES↗

Interfacial Area Transport through Vertical-Downward Elbows in Air-water Two-phase Flow

In the study of two-phase flow, models are often developed by the data acquired in a test section with fixed orientation and with no flow restrictions. In view of practical nuclear reactor systems, however, two-phase flow through flow restrictions is important. Flow restrictions and orientations can alter both global and local two-phase flow parameters such as: cause additional pressure loss; alter the flow regime transition; change bubble distributions; affect the bubble velocity and the bubble interaction mechanisms. However, there is insufficient database and predictive models that can account for such effects. In view of above, the objectives of the current study are: (1) to establish database for local and global two-phase flow parameters downstream of a horizontal-to-vertical glass elbow with a non-dimensional radius of curvature, R{sub c}/D, of three, (2) to develop predictive models in the elbow region, and (3) to apply the developed model to the interfacial area transport equation (IATE) and evaluate it in elbow regions. (authors)

42 ENGINEERING↗

Transition-metal substitution in PbAlBO{sub 4}: Synthesis, structural and spectroscopic studies of manganese containing phases

Highlights: ► Synthesis of mullite-type PbAl{sub 1−x}Mn{sub x}BO{sub 4} by solid state and glycerin methods. ► Fundamental parameter approach describes the X-ray powder diffraction profiles. ► Cell parameters anisotropically change with increasing Mn in the structure. ► Bond valence sums of Pb{sup 2+} linearly correlates eccentricity parameter. ► FTIR spectra confirm the trigonal planar BO{sub 3}. -- Abstract: Mullite-type metal borates PbAlBO{sub 4} with planar BO{sub 3} groups are potential candidates for nonlinear optical properties. We successively substituted aluminum with manganese in the composition PbAl{sub 1−x}Mn{sub x}BO{sub 4}, which would help tuning the crystal chemistry and related physical properties. The end member PbAlBO{sub 4} was synthesized by conventional solid state reaction; the other members of the PbAl{sub 1−x}Mn{sub x}BO{sub 4} series were prepared by glycerin method. The fundamental parameter approach was applied in the Rietveld refinements to describe the X-ray powder diffraction profiles. The cell parameters and interatomic bond distances were studied with respect to the chemical composition x. The MO{sub 6} octahedral distortion linearly increased with the averaged M-O bond distance, which is correlated with the increasing amount of manganese atoms in the structure. The change of the average crystal size and microstrain were explained in terms of Al/Mn ratio in the solid solution. While the empirical bond-valence sums (BVS) of one oxygen atom, bridging the edge-sharing MO{sub 6} octahedron, were found to be under-bonded, the other one was over-bonded. The stereoactivity of the 6s{sup 2} lone electron pair of the Pb{sup 2+} cation was characterized in terms of the absolute value of eccentricity parameter (|Φ{sub i}|). Both bond valence parameter (r{sub 0i}) and BVS of Pb showed a linear correlation with |Φ{sub i}|. Deconvolution of the absorption feature of the infrared powder spectra between 1000 cm{sup −1} and 1400 cm{sup −1} required four fitted bands, which were assigned to B-O stretching vibrations of the trigonal planar BO{sub 3} groups. With increasing Al{sup 3+} dilution in PbAl{sub 1−x}Mn{sub x}BO{sub 4} almost all observed modes shifted toward lower wavenumbers confirming the solid solution. The absorptions caused by the vibrations of the heavy atom Pb were observed in the far-IR region.

36 MATERIALS SCIENCE↗

Distribution and occurrence of localized-bursts in two-phase flow through porous media

This study examines the dynamics of two-phase drainage with experiments of air invasion into a translucent water-saturated porous medium, at low injection speeds. Air displaces the water by irregular bursts of motion, suddenly invading small portions of the medium. These periods of activity, followed by dormancy, are similar to descriptions of systems at a self-organized critical point, where a slight disturbance may induce an avalanche of activity. The fractal characteristics of the invading air structure at breakthrough are examined through static (box-counting) calculations of the air mass and through an evaluation of the time-dependent motion of the invading mass; results are compared with prior low-velocity two-phase studies in porous media. Dynamic, power-law scaling for invasion percolation is shown to be well suited to describing the structure of the invading fluid. To examine the applicability of self-organized criticality predictions to the invading fluid movement, a new image analysis procedure was developed to identify the location of individual bursting events during the drainage experiments. The predictions of self-organized criticality, namely the scaling of the occurrence of bursts to the mass of the bursts and a spatio-temporal randomness of different sized bursts, are also examined. Bursts of a wide range of sizes are shown to occur throughout the porous medium, over both time and space. The mass distribution of burst sizes is shown to be well described by self-organized criticality predictions, with an experimentally determined scaling exponent of 1.53.

02 PETROLEUM↗

Influence of copper substitution on the magnetic and magnetocaloric properties of NiMnInB alloys

The structural, magnetocaloric, and thermomagnetic properties of Ni{sub 50.51}Mn{sub 34.34−x}Cu{sub x}In{sub 14.14}B{sub 1.01} with x = (0, 1.26, and 2.02) have been studied using room-temperature x-ray diffraction, differential scanning calorimetry (DSC), and magnetization measurements. The partial substitution of Cu for Mn was found to shift both the martensitic transition temperature (T{sub M}) and the Curie temperature (T{sub C}) to lower temperatures. The values of the latent heat (L = 9.4 J/g) and corresponding magnetic (ΔS{sub M}) and total entropy (ΔS{sub T}) changes (ΔS{sub M} = 22.60 J/kg K for ΔH = 5 T and ΔS{sub T} = 29.7 J/kg K) have been evaluated using magnetic and DSC measurements, respectively, for the sample with x = 1.26. Large negative values of ΔS{sub M} of −7.27 and −5.98 J/kg K for ΔH = 5 T in the vicinity of T{sub C} were observed for x = 1.26 and 2.02, respectively. It has been found that the application of hydrostatic pressure changes the magnetic ground state of the martensitic phase and increases the temperature stability of the martensitic phase. The roles of the magnetic and structural changes on the transition temperatures are discussed.

36 MATERIALS SCIENCE↗

Thermochemical analysis of Mo-C-H system for synthesis of molybdenum carbides

Earth abundant materials such as molybdenum carbide are gaining importance over expensive, precious metals such as ruthenium and platinum as catalysts for heterogeneous and electrochemical reaction systems. Despite its attributes, molybdenum carbide has not been developed as a commercial catalyst due to a lack of knowledge about the material, its structure and composition. As a result, most synthesis processes yield low surface area molybdenum carbide with contaminants such as excess carbon. In this study reported herein, we carried out DFT assisted thermodynamic modeling to better understand molybdenum carbon phase behavior. Our gas phase equilibrium studies led to better comprehension and refinement of synthesis parameters and conditions. With the help of these thermochemical models, we were able to design a decarburization via hydrogen methanization treatment that yielded 2 nm MoC particles free of contaminants with the highest surface areas reported so far i.e. up to 360 m 2 /g.

36 MATERIALS SCIENCE↗