Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Control the polarization state of light with symmetry-broken metallic metastructures

Controlling the polarization state, the transmission direction, the amplitude and the phase of light in a very limited space is essential for the development of on-chip photonics. Over the past decades, numerous sub-wavelength metallic microstructures have been proposed and fabricated to fulfill these demands. In this article, we review our efforts in achieving negative refractive index, controlling the polarization state, and tuning the amplitude of light with two-dimensional (2D) and three-dimensional (3D) microstructures. We designed an assembly of stacked metallic U-shaped resonators that allow achieving negative refraction for pure magnetic and electric responses respectively at the same frequency by selecting the polarization of incident light. Based on this, we tune the permittivity and permeability of the structure, and achieve negative refractive index. Further, by control the excitation and radiation of surface electric current on a number of 2D and 3D asymmetric metallic metastructures, we are able to control the polarization state of light. It is also demonstrated that with a stereostructured metal film, the whole metal surfaces can be used to construct either polarization-sensitive or polarization-insensitive prefect absorbers, with the advantage of efficient heat dissipation and electric conductivity. Our practice shows that metamaterials, including metasurface, indeed help to master light in nanoscale, and are promising in the development of new generation of photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaginary admittance and charge transfer resistance correlate to the physiological status of Shewanella oneidensis cultures in real time

Monitoring microbial activity is essential for industrial and environmental applications to proceed efficiently. To minimize time and labor-intensive monitoring, a new paradigm is required for in-situ, real time analysis. Since bioconversion of organics is accomplished by microorganisms through the oxidation of feedstocks linked to the reduction of electron acceptors, microorganisms can be viewed as electrochemical catalysts. In this respect, cell membranes have an electrical potential, which is analogous to a conventional capacitor and linked dynamically to cellular activity. Here, in this study, we demonstrate the use of electrochemical impedance spectrometry (EIS) and cyclic voltammetry (CV) for monitoring microbial metabolic activity in real time, in-situ. The effect of organic electron donors as a function of concentration to the physiological status of strains of Shewanella oneidensis was determined. In this study, the pyomelanin overproducer (S. oneidensis ΔhmgA) and the pyomelanin deficient mutant (S. oneidensis ΔmelA) were chosen due to different surface electrochemical characteristics along with differences in oxygen utilization efficiency. CV, relative admittance, phase shift and permittivity changed with growth status and correlated with electron flow from organic carbon sources and terminal electron acceptor availability. This work offers a novel and inexpensive approach to real time monitoring with the advantage of abundant data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Achieving superior electromagnetic wave absorbers through the novel metal-organic frameworks derived magnetic porous carbon nanorods

High absorption capacity and broad absorption bandwidth electromagnetic wave (EMW) absorption materials (namely, EMW absorbers) are highly desirable due to the interference with electronics and harms on human beings’ health. In search for rational design on nanostructured absorbers, we have synthesized and demonstrated the rod-shape composites with Fe-containing magnetic nanoparticles (Fe 3 O 4 , Fe 3 C and Fe NPs) embedded into nano-porous carbon (NPC) through pyrolysis of Fe-based metal-organic frameworks (MOFs). The morphologies, compositions, and graphitization degree of the Fe-MOFs derived magnetic NPC nanorods can be effectively controlled via adjusting the pyrolysis temperatures. The graphitization level has a significant influence on the permittivity of the composites upon variation of pyrolysis temperatures, thereby a tunable electromagnetic wave (EMW) absorption is observed. Consequently, the resulting magnetic NPC nanorods obtained at pyrolysis temperature of 600 and 700 °C exhibit the most remarkable EMW absorption performance with a strong reflection loss of -52.9 dB and broad effective bandwidth (f e ) of 4.64 GHz at 3.07 mm. With a thickness of 3.5 mm, the f e for the magnetic NPC nanorods at 600 °C covers the whole X-band from 7.92 to 12.48 GHz. Finally, the noticeable EMW absorption performances have been greatly enhanced compared to those reported Fe 3 O 4 based absorbers, owing to the synergy of multiple components and the porous structures inherited from MOFs.

36 MATERIALS SCIENCE↗

Multiscale modeling of microwave-heated multiphase systems

Modeling of microwave heating of multiphase systems requires resolving the electromagnetic field from the single particle to the entire cavity. We introduce a multiscale methodology for computationally affordable simulations of microwave heating of multiphase systems consisting of one phase dispersed in a continuum phase. The methodology homogenizes the original multiphase system, by taking advantage of the large separation of length scales, to calculate the effective permittivity, effective thermal conductivity, and volumetric power absorbed in each phase. The methodology is rigorously assessed against particle-resolved detailed numerical simulations of model systems. We demonstrate a significant reduction in computational cost while retaining the accuracy of detailed simulations. Lastly, the present methodology enables high throughput exploration of novel multiphase system designs utilizing microwave heating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical capacitance tomography to monitor unsaturated moisture ingress in cement-based materials

This paper reports the investigation of the feasibility of electrical capacitance tomography (ECT) for monitoring unsaturated moisture flow in cement-based materials. ECT is an imaging modality in which the electrical permittivity distribution within an object is reconstructed based on measured capacitances between electrodes attached on the object's surface. In a series of experiments, mortar specimens with different water-cement mass ratios (w/c) (0.25, 0.45 & 0.60) were monitored with ECT during the moisture ingress. The results demonstrate that ECT is able to image the moisture ingress within the specimens, and further, to distinguish between different moisture flow rates in mortars with different porosities resulting from differing w/c ratios. These findings suggest that ECT could provide a tool for monitoring, visualizing and quantifying the rate of moisture ingress in cement-based materials non-destructively.

36 MATERIALS SCIENCE↗

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗

Modelling nanofiltration of electrolyte solutions

This review critically examines current models for nanofiltration (NF) of electrolyte solutions. We start from linear irreversible thermodynamics, we derive a basic equation set for ion transfer in terms of gradients of ion electrochemical potentials and transmembrane volume flux. These equations are extended to the case of significant differences of thermodynamic forces across the membrane (continuous version of irreversible thermodynamics) and solved in quadratures for single salts and trace ions added to single salts in the case of macroscopically-homogeneous membranes. These solutions reduce to (quasi)analytical expressions in the popular Spiegler-Kedem approximation (composition independent phenomenological coefficients), which we extend to the case of trace ions. This enables us to identify membrane properties (e.g. ion permeances, ion reflection coefficients, electrokinetic charge density) that control its performance in NF of multi-ion solutions. Further, we specify the phenomenological coefficients of irreversible thermodynamics in terms of ion partitioning, hindrance and diffusion coefficients for the model of straight cylindrical capillaries. The corresponding expressions enable assessment of the applicability of the popular nanopore model of NF. This model (based on the use of macroscopic approaches at nanoscale) leads to a number of trends that have never been observed experimentally. We also show that the use of the Born formula (frequently employed for the description of dielectric exclusion) hardly leads to meaningful values of solvent dielectric constant in membrane pores because this formula disregards the very solvent structure whose changes are supposed to bring about the reduction of dielectric permittivity in nanopores. We conclude that the effect should better be quantified in terms of ion excess solvation energies in the membrane phase. As an alternative to the nanopore description of NF, we review recent work on the development of an advanced engineering model for NF of multi ion solutions in terms of a solution-diffusionelectromigration mechanism. This model (taking into account spontaneously arising transmembrane electric fields) captures several trends observed experimentally, and the use of trace ions can provide model parameters (ion permeances in the membrane) from experiment. We also consider a recent model (ultrathin barrier layers with deviations from local electroneutrality) that may reproduce observed feed-salt concentration dependences of membrane performance in terms of concentration independent properties like excess ion solvation energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Slip ratio in dispersed viscous oil-water pipe flow

In this article, dispersed flow of viscous oil and water is investigated. The experimental work was performed in a 26.2-mm-i.d. 12-m-long horizontal glass pipe using water and oil (viscosity of 100 mPa s and density of 860 kg/m{sup 3}) as test fluids. High-speed video recording and a new wire-mesh sensor based on capacitance (permittivity) measurements were used to characterize the flow. Furthermore, holdup data were obtained using quick-closing-valves technique (QCV). An interesting finding was the oil-water slip ratio greater than one for dispersed flow at high Reynolds number. Chordal phase fraction distribution diagrams and images of the holdup distribution over the pipe cross-section obtained via wire-mesh sensor indicated a significant amount of water near to the pipe wall for the three different dispersed flow patterns identified in this study: oil-in-water homogeneous dispersion (o/w H), oil-in-water non-homogeneous dispersion (o/w NH) and Dual continuous (Do/w and Dw/o). The phase slip might be explained by the existence of a water film surrounding the homogeneous mixture of oil-in-water in a hidrofilic-oilfobic pipe. (author)

42 ENGINEERING↗

Influence of frequency, grade, moisture and temperature on Green River oil shale dielectric properties and electromagnetic heating processes

Development of in situ electromagnetic (EM) retorting technologies and design of specific EM well logging tools requires an understanding of various process parameters (applied frequency, mineral phases present, water content, organic content and temperature) on oil shale dielectric properties. In this literature review on oil shale dielectric properties, we found that at low temperatures (<200° C) and constant oil shale grade, both the relative dielectric constant (ε') and imaginary permittivity (ε'') decrease with increased frequency and remain constant at higher frequencies. At low temperature and constant frequency, ε' decreases or remains constant with oil shale grade, while ε'' increases or shows no trend with oil shale grade. At higher temperatures (>200º C) and constant frequency, epsilon' generally increases with temperature regardless of grade while ε'' fluctuates. At these temperatures, maximum values for both ε' and ε'' differ based upon oil shale grade. Formation fluids, mineral-bound water, and oil shale varve geometry also affect measured dielectric properties. This review presents and synthesizes prior work on the influence of applied frequency, oil shale grade, water, and temperature on the dielectric properties of oil shales that can aid in the future development of frequency- and temperature-specific in situ retorting technologies and oil shale grade assay tools.

04 OIL SHALES AND TAR SANDS↗

Hydrated goethite ([alpha]-FeOOH) (1 0 0 ) interface structure: Ordered water and surface functional groups

Goethite({alpha}-FeOOH), an abundant and highly reactive iron oxyhydroxide mineral, has been the subject of numerous studies of environmental interface reactivity. However, such studies have been hampered by the lack of experimental constraints on aqueous interface structure, and especially of the surface water molecular arrangements. Structural information of this type is crucial because reactivity is dictated by the nature of the surface functional groups and the structure or distribution of water and electrolyte at the solid-solution interface. In this study we have investigated the goethite (1 0 0) surface using surface diffraction techniques, and have determined the relaxed surface structure, the surface functional groups, and the three dimensional nature of two distinct sorbed water layers. The crystal truncation rod (CTR) results show that the interface structure consists of a double hydroxyl, double water terminated interface with significant atom relaxations. Further, the double hydroxyl terminated surface dominates with an 89% contribution having a chiral subdomain structure on the (1 0 0) cleavage faces. The proposed interface stoichiometry is ((H{sub 2}O)-(H{sub 2}O)-OH{sub 2}-OH-Fe-O-O-Fe-R) with two types of terminal hydroxyls; a bidentate (B-type) hydroxo group and a monodentate (A-type) aquo group. Using the bond-valence approach the protonation states of the terminal hydroxyls are predicted to be OH type (bidentate hydroxyl with oxygen coupled to two Fe{sup 3+} ions) and OH{sub 2} type (monodentate hydroxyl with oxygen tied to only one Fe{sup 3+}). A double layer three dimensional ordered water structure at the interface was determined from refinement of fits to the experimental data. Application of bond-valence constraints to the terminal hydroxyls with appropriate rotation of the water dipole moments allowed a plausible dipole orientation model as predicted. The structural results are discussed in terms of protonation and H-bonding at the interface, and the results provide an ideal basis for testing theoretical predictions of characteristic surface properties such as pK{sub a}, sorption equilibria, and surface water permittivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoscale modeling of electric double layer capacitors with three-dimensional ordered structures

This paper presents general mathematical formulations for simulating electric double layer capacitors (EDLCs) with three-dimensional ordered structures. For the first time, a general set of boundary conditions was derived in order to account for the Stern layer without simulating it in the computational domain. These boundary conditions were valid for planar, cylindrical, and spherical electrode particles or pores. They made possible the simulations of EDLCs with complex geometries while rigorously accounting for both the Stern and diffuse layers. The model also simultaneously accounted not only for 3D electrode morphology but also for finite ion size and field-dependent electrolyte dielectric permittivity. It was used to faithfully simulate the complex structure of an EDLC electrode consisting of ordered bimodal mesoporous carbon featuring both macropores and mesopores. Areal and gravimetric capacitances were predicted based on non-solvated and solvated ion diameters. These two cases set the upper and lower bounds for the predicted capacitances. The capacitances predicted using non-solvated ion diameter were found to be in good agreement with experimental data reported in the literature. All surfaces contributed to the overall capacitance of EDLCs. The gravimetric capacitance of different bimodal carbons increased linearly with increasing specific surface area corresponding to constant areal capacitance.

30 DIRECT ENERGY CONVERSION↗

Synthesis, growth, structural and optical studies of a new organic three dimensional framework: 4-(aminocarbonyl)pyridine 4-(aminocarbonyl)pyridinium hydrogen L-malate

4-(aminocarbonyl)pyridine 4-(aminocarbonyl)pyridinium hydrogen L-malate [(4ACP)(4ACP).(LM)] a new organic nonlinear optical (NLO) crystal was grown by the slow evaporation method. Single crystal X-ray diffraction analysis revealed that the [(4ACP)(4ACP).(LM)] crystal belongs to monoclinic crystal system, space group P2{sub 1}/n, with a three dimensional network. Thermogravimetry (TG) and differential thermal (DT) analyses showed that [(4ACP)(4ACP).(LM)] is thermally stable up to 165 °C. The optical transmittance window and the lower cut-off wavelength of [(4ACP)(4ACP).(LM)] were found out by UV–vis–NIR spectral study. The molecular structure of [(4ACP)(4ACP).(LM)] was further confirmed by FTIR spectral studies. The relative dielectric permittivity and dielectric loss were determined as function of frequency and temperature. The third order nonlinear optical property of [(4ACP)(4ACP).(LM)] was studied by the Z-scan technique using a 532 nm diode pumped CW Nd:YAG laser. Nonlinear refractive index, nonlinear absorption coefficient and third order nonlinear susceptibility of the grown crystal were found to be 7.38×10{sup −8} cm{sup 2}/W, 0.08×10{sup −4} cm/W and 5.36×10{sup −6} esu, respectively. The laser damage threshold value is found to be 1.75 GW/cm{sup 2} - Graphical abstract: In the crystal structure of the title complex, the asymmetric unit contains one hydrogen L-malate anion, 4-(aminocarbonyl)pyridinium cation and a neutral isonicotinamide molecule. It is stabilized by intermolecular N-H…O, C-H…O and O-H…O hydrogen bonds which generate a three dimensional network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous dielectric behaviour in centrosymmetric organic–inorganic hybrid chlorobismuthate(III) containing functional N,N-dimethylethylammonium ligand. Crystal structure and properties

Graphical abstract: Display Omitted Highlights: ► Novel organic–inorganic hybrid chlorobismuthate(III). ► Unprecedented dielectric response in non-polar material. ► Dielectric relaxation characterized by an exceptionally large dielectric increment. ► The NMR measurements confirmed dynamic disorder of cations. -- Abstract: The structure of [C{sub 2}H{sub 5}NH(CH{sub 3}){sub 2}{sup +}]{sub 3}[BiCl{sub 6}{sup −}] (abbreviated as DCB) was determined by a single-crystal X-ray diffraction at 115 K. The compound adopts tetragonal symmetry with the space group I4{sub 1}/acd; a = 23.35 Å, c = 17.60 Å, V = 9598 Å{sup 3} and Z = 16. The crystal structure of DCB is built up of isolated [BiCl{sub 6}]{sup 3−} units and N,N-dimethylethylammonium counterions that are accommodated in the large voids. At ambient temperature two-thirds of the counterions appear to be dynamically disordered. Dynamics of this type of cations contributes to the enhanced dielectric permittivity of DCB. A low frequency dielectric relaxation process that takes place between 200 and 300 K is characterized by an exceptionally large dielectric increment, Δε > 100, which is unprecedented in nonferroelectric materials. The molecular motions of the N,N-dimethylethylammonium cations were studied by means of {sup 1}H NMR spin-lattice relaxation time measurements.

36 MATERIALS SCIENCE↗

Structural and electrical properties of K{sub 3}Li{sub 2}Nb{sub 5}O{sub 15} thin film grown by pulsed laser deposition

Highlights: • (001)KLN tetragonal tungsten bronze thin film has been successfully deposited on MgO substrate using PLD. • Smooth and droplets-free surface has been obtained as evidenced by RHEED and AFM. • Impedance spectroscopy shows Debye type dielectric relaxation. • The ferroelectric character of the obtained (001)KLN film has been evidenced using capacitance voltage measurement. - Abstract: Potassium lithium niobate K{sub 3}Li{sub 2}Nb{sub 5}O{sub 15} (KLN) with tetragonal tungsten bronze-type structure (TTB) thin film was successfully deposited on MgO substrate by pulsed laser ablation method. The substrate was coated by a perovskite conductive layer of La{sub 0.5}Sr{sub 0.5}CoO{sub 3}. X-ray diffraction revealed (001) orientation with low mosaicity. The oriented film had smooth and droplets-free surface as evidenced by reflection high electron energy diffraction and atomic force microscopy. Using Pt top electrode, dielectric measurements indicated stable dielectric permittivity of about 400 up to 10{sup 5} Hz. A dielectric relaxation was also observed. Moreover, the capacitance voltage measurements of the obtained (001)KLN film show ferroelectric behavior. Our results provide useful insights into the growth of tetragonal tungsten and other complex materials. These results will be useful for the growth and integration of epitaxial TTB thin films on perovskite and Si substrates.

36 MATERIALS SCIENCE↗

Semiclassical model for calculating exciton and polaron pair energetics at interfaces

Exciton and polaron pair dissociation is a key functional aspect of photovoltaic devices. To improve upon the current state of interfacial transport models, we augment the existing classical models of dielectric interfaces by incorporating results from ab initio calculations, allowing us to calculate exciton and polaron binding energies more accurately. We demonstrate the predictive capabilities of this new model using two interfaces: (i) the boron subphthalocyanine chloride (SubPc) and C60 interface, which is an archetype for many organic photovoltaic devices; and (ii) pentacene and silicon (1 0 0), which represents a hybrid between organic and inorganic semiconductors. Overall, our calculations predict that the insertion of molecular dipoles at interfaces can be used for improving polaron pair dissociation and that sharp transitions in dielectric permittivity can have a stronger effect on the polaron pair dissociation than even the electron-hole Coulomb interaction.

36 MATERIALS SCIENCE↗

Influence of thermal treatment time on structural and physical properties of polyimide films at beginning of carbonization

Poly(4,4'-oxydiphenylene-oxydiphthalimide) (POO) was thermally treated at 773 K for 1, 15 and 60 min under argon atmosphere resulting in free-standing films with intermingled characteristics between polymer and carbon-rich derivatives. Degradative thermal analysis performed by pyrolysis-gas chromatography/mass spectroscopy (Py-GC/MS) revealed CO 2 among the major products of thermal decomposition which according to electron paramagnetic resonance (EPR) passed through a radical process. X-ray diffraction (XRD) revealed thermal treated samples with semicrystalline organization that was attributed to the development of lamellae structure. Moreover, Atomic force microscopy (AFM) showed an increase in the roughness of the samples that acquired pronounced roughcast-like surface. Hence, there was an enhancement of mechanical strength and dielectric permittivity. From the data collected a mechanism of thermal decomposition was proposed.

36 MATERIALS SCIENCE↗

An air-spaced terahertz metamaterial perfect absorber

Metamaterial absorbers are typically comprised of a layer of split-ring resonators and a ground plane with a dielectric spacer layer that provides structural support and in which absorbed energy is deposited. For this work, we address the question “What happens to the absorption if the spacer layer is removed?” through the design, fabrication, and characterization of a terahertz metamaterial absorber with air as the spacer layer. Reflection based terahertz time-domain spectroscopy was employed to measure the absorption and interference theory was used to interpret the results. The surface current in the gold ground plane and split-ring resonator layer is solely responsible for the absorption in the form of joule heating. In comparison to dielectric spacer layer absorbers, the quality factor is increased by a factor of ~3. The electric field is highly concentrated in the volume between split-ring resonator layer and the ground plane offering the potential for novel sensing application if materials can be incorporated into this region (e.g. with microfluidics). In the spirit of this possibility, simulations of the absorption have been performed. The variation of the real part of the permittivity of the spacer material results in an absorption peak frequency shift, while a change in the imaginary part affects the quality factor and amplitude. Ultimately, the high quality factor and the absence of the spacer material provide the air-spacer metamaterial absorber with unique advantages for sensing applications.

42 ENGINEERING↗

Diffraction of radio frequency waves by spatially modulated interfaces in the plasma edge in tokamaks

We report the use of radio frequency (RF) waves in fusion plasmas for heating, for non-inductive current generation, for profile control and for diagnostics has been well established. The RF waves, excited by antenna structures placed near the wall of a fusion device, have to propagate through density fluctuations at the plasma edge. These fluctuations can modify the properties of the RF waves that propagate towards the core of the plasma. A full-wave electromagnetic computational code ScaRF based on the finite difference frequency domain (FDFD) method has been developed to study the effect of density turbulence on RF waves. The anisotropic plasma permittivity used in the scattering studies is that for a magnetized, cold plasma. The code is used to study the propagation of an RF plane wave through a modulated, spatially periodic density interface. Such an interface could arise in the edge region due to magnetohydrodynamic instability or drift waves. The frequency of the plane wave is taken to be in the range of the electron cyclotron frequency. The scattering analysis is applicable to ITER-like plasmas, as well as to plasmas in medium sized tokamaks such as TCV, ASDEX-U and DIII-D. The effect of different density contrasts across the interface and of different spatial modulations are discussed. While ScaRF is used to study a periodic density fluctuation, the code is general enough to include different varieties of density fluctuations in the edge region – such as blobs and filaments, and spatially random fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗