Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTNERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Prototype Design, Analysis, and Results for a Liquid Radiological Waste Control Room

Human factors researchers at Idaho National Laboratory are collaborating with a utility partner to address human factors in the modernization of their radiological waste control room. The collaborating utility, Palo Verde, plans to remove all control boards associated with the liquid radiological waste system, which include controls, indicators, and alarm systems, and replace them with modernized digital instrumentation and controls and displays. To be sure the new system either supports current operational performance or enhances it, researchers have carried out three planning and analysis activities: expert operator review, function allocation analysis, and human factor principles and design applications. Researchers utilized access to expert operators to gain information about the system. Operators were asked to detail a procedure exemplifying typical interactions with the liquid radiological waste system and provide it to Idaho National Laboratory with a list of functionalities to incorporate (Section 4.1). Later, operators were asked to provide additional feedback to inform a prototype with adequate realism to support sound analysis of the system design (Section 4.2). Other operators not associated with the utility partner were also involved in experiment design and prototype evaluation (Section 4.2). Due to the extent of the upgrade, care was given to measure the change in the operator’s role (Section 7). As part of the modernization, some plant systems are expected to be equipped with automation or sensors that send information directly to the control where previously operators were required to enter controlled areas to find the information. Such updates made slight changes to operator role requirements, but the impact was negligible. The way the system is operated will remain largely the same, but operator convenience and safety is expected to increase. Additionally, to map operator tasks during the selected procedure, an Operational Sequence Diagram was created (Section 7.1). The diagram helped to account for every interaction and piece of equipment needed to create the prototype design. Alternatively, the diagram can be created following the final design to identify any function reallocations due to redesign. Human factors principles were also applied to the design. An ergonomic assessment was performed on the workspace resulting in various recommendations for placing and designing the new workstation (Section 6). A 3 D mockup of the control room was created to depict the options available with in-depth descriptions of each. Furthermore the prototype design incorporates well known human factors principles. However, to be sure the principles are sound in the control room context, the researches have designed an experiment to measure the impact design decision has on operator performance. The experiment is described in detail in Section 5. Lastly, a tool emerged as this effort began called the NUREG 0711 Crosswalk (Section 8). The tool has multiple uses, but it was primarily intended to communicate how the researcher’s action directly mapped to specific results suggested in the Nuclear Regulatory Commission review guideline. The tool also maps how current results impact future decisions in the modernization process.

47 OTHER INSTRUMENTATION↗

NSUF 2016 Annual Report

The Nuclear Science User Facilities (NSUF) and its partner facilities represent a prototype laboratory that utilizes a distributed partnership, with each facility bringing exceptional capabilities to the relationship including reactors, beamlines, state-of-the-art instruments, hot cells, and equally important, expertise. These capabilities and people together create a nationwide infrastructure that allows the best ideas to be tested using the most advanced capabilities. Through the NSUF, researchers and their collaborators are building on current knowledge to better understand the complex behavior of materials and fuels in a nuclear reactor. The NSUF’s partnership program in 2016 included eight universities, one research and education consortium, three national laboratories, and one industry partner. The avenues opened through these partnerships facilitate cooperative research across the country, matching people with capabilities and students with mentors. The NSUF in 2016 included Idaho National Laboratory (INL) and the following institutions: • Argonne National Laboratory • Center for Advanced Energy Studies (a research and education consortium between Boise State University, INL, Idaho State University, University of Idaho, and University of Wyoming) • Illinois Institute of Technology • Massachusetts Institute of Technology • North Carolina State University • Oak Ridge National Laboratory • Pacific Northwest National Laboratory • Purdue University • University of California, Berkeley • University of Michigan • University of Nevada, Las Vegas • University of Wisconsin • Westinghouse Materials Center of Excellence. This report contains details on new capabilities brought into the NSUF in 2016, the evidence of the increasing research facilitated by the NSUF, and new tools and activities to propel nuclear research and development forward to meet energy reliability and security needs. Learn about the NSUF Nuclear Fuels and Materials Library and the Nuclear Energy Infrastructure Database, and how the robust NSUF website continues to evolve to support new tools. Read about how the NSUF supports Department of Energy (DOE) missions through efforts like the 2016 NSUF Ion Beam Options Workshop, which led to a prioritiza-tion of ion beam facilities according to their ability to support Department of Energy Office of Nuclear Energy (DOE-NE) missions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Materials and Device Architectures for Organic Solar Cell Applications: Cooperative Research and Development Final Report, CRADA Number CRD-09-355

The Centre for Organic Photonics & Electronics (COPE) at UQ has been successful in acquiring funding from the Australian Center for Advanced Photovoltaics (ACAP), which is the Australian partner of the Australia-US Institute for Advanced Photovoltaics (AUSIAPV). NREL is a key partner in AUSIAPV (along with other US research institutions (ASU, Sandia NL, LBNL, Stanford, Georgia Tech and UCSB). NREL will collaborate with COPE to advance the science and technology of organic materials for solar cell applications. COPE has significant programs in the development and understanding of new materials for organic optoelectronic applications and, in particular, for thin film bulk heterojunction (BHJ) solar cells and Organic Photodiodes (OPDs). NREL has significant established research programs in all aspects of organic photovoltaic technology and has well-developed expertise in the area of materials characterization, photocarrier transport measurements as well as device fabrication, scale-up and stability. This collaboration will combine the expertise of the two institutions to work towards demonstrating the scalability of organic materials for BHJ and OPD applications by measuring the fundamental properties of the materials as a function of processing and evaluating their performance and stability in photovoltaic devices under simulated illumination conditions. Currently, both NREL and UQ have individual organic material development and processing efforts and have independently demonstrated several prototype materials and device architectures as promising candidates for organic solar cells and OPDs. This CRADA will align these efforts building upon strengths of the two institutions to further design and demonstrate materials and device architectures to advance organic BHJ solar cells and OPDs. It should also be clearly noted that we foreshadow possible expansion of collaborative research activities between COPE and NREL, which currently lie outside the scope of the current statement of work, which will be amended as required by mutually executed written modifications to this CRADA.

14 SOLAR ENERGY↗

Uncertainty in master-equation-based rate coefficient calculations

Rate coefficients are key quantities in gas phase kinetics and can be determined theoretically via master equation (ME) calculations. Rate coefficients characterize how fast a certain chemical species reacts away due to collisions into a specific product. Some of these collisions are simply transferring energy between the colliding partners, in which case the initial chemical species can undergo a unimolecular reaction: dissociation or isomerization. Other collisions are reactive, and the colliding partners either exchange atoms, these are direct reactions, or form complexes that can themselves react further or get stabilized by deactivating collisions with a bath gas. The input of MEs are molecular parameters: geometries, energies, and frequencies determined from ab initio calculations. While the calculation of these rate coefficients using ab initio data is becoming routine in many cases, the determination of the uncertainties of the rate coefficients are often ignored, sometimes crudely assessed by varying independently just a few of the numerous parameters, and only occasionally studied in detail. In this study, molecular frequencies, barrier heights, well depths, and imaginary frequencies (needed to calculate quantum mechanical tunneling) were automatically perturbed in an uncorrelated fashion. Our Python tool, MEUQ, takes user requests to change all or specified well, barrier, or bimolecular product parameters for a reaction. We propagate the uncertainty in these input parameters and perform global sensitivity analysis in the rate coefficients for the ethyl + O 2 system using state-of-the-art uncertainty quantification (UQ) techniques via Python interface to UQ Toolkit (www . sandia.gov/uqtoolkit). A total of 10,000 sets of rate coefficients were collected after perturbing 240 molecular parameters. With our methodology, sensitive mechanistic steps can be revealed to a modeler in a straightforward manner for identification of significant and negligible influences in bimolecular reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plan to Verify and Validate Multi-Hazard Risk-Informed Margin Management Methods and Tools

This report describes the development plan for verification and validation (V&V) of multihazard risk informed margin management (RIMM) methods and tools. The plan will include using new INL developed tool sets coupled with the new multi-partner External Hazards Experimental Group (EHEG) coordinated by the Idaho National Laboratory (INL) within the Risk-Informed Safety Margin Characterization (RISMC) technical pathway of the Light Water Reactor Sustainability Program. The RISMC pathway is developing a suite of new tools and methods for advanced evaluation of facility risk. The RISMC toolkit, includes tools and methods focused on evaluation of risk from external hazards (e.g, seismic and flooding events), which have been shown to be dominant risk contributors in probabilistic risk assessments performed for operating nuclear power plants (NPPs). The external events activity (EEA) within the RISMC pathway is tasked with developing tools and methods focused on evaluation of multi-hazard external risk (e.g, seismic and flooding events). The EHEG will provide technical expertise and experimental large-scale testing data needed for development and validation of tools and methods in the RISMC toolkit for external hazard safety evaluations. The EEA within RISMC has two key elements: (1) an organizational and research framework provided by INL and (2) a coordinated group of university and national laboratory partners with the complementary expertise and experimental capabilities needed to conduct large-scale external hazard-focused experiments. This cooperative group will allow INL to leverage a range of existing capabilities to meet the unique needs of RISMC tool and method development. In addition, the capabilities of the EHEG could be used to address needs of other national laboratories. Currently, there is limited data available for development and validation of the tools and methods being developed in the RISMC Toolkit. The EHEG is being developed to obtain high quality, large-scale experimental data validation of RISMC tools and methods in a timely and cost-effective way. The group of universities and national laboratories that will eventually form the EHEG (which is ultimately expected to include both the initial participants and other universities and national laboratories that have been identified) have the expertise and experimental capabilities needed to both obtain and compile existing data archives and perform additional seismic and flooding experiments. The data developed by EHEG will be stored in databases within RISMC. These databases will be used to validate the advanced external hazard tools and methods. The numerical tools under development in RISMC are used to evaluate the impacts that external hazards have on nuclear power plants. These analysis tools will be used to advanced current risk calculation processes and reduce uncertainty in these calculations. To have confidence in the predictive capability of these numerical tools it is important to verify and validate them. To verify and validate numerical tools the user must understand what physics is being used to represent the problem (i.e. constitutive models used to represent the soil and structure), the numerical solver approach used (i.e. finite element), what data already exists that could be used to validate the tools, and what data is needed for validation.

31274↗

Planning and Analyses Performed to Install Halden’s Advanced Control Room Concept in the Human Systems Simulation Laboratory

The United States (U.S.) Department of Energy (DOE) sponsors the Light Water Reactor Sustainability (LWRS) Program, which has the goal of sustaining U.S. nuclear assets through conducting high-quality, value-added research and development (R&D) that provides the technical bases to extend the operating life of commercial NPPs. One area in the LWRS program is the Plant Modernization pathway, which includes human factors R&D, human factors engineering (HFE), and ergonomics, conducts targeted R&D to address aging and reliability concerns with the legacy instrumentation and control (I&C) and related information systems in NPPs. LWRS program researchers have been conducting R&D that enables the modernization of the I&C technologies in NPP main control rooms and have authored numerous reports on those research activities. Interestingly, however, virtually all of the control room modernization activities that have been researched in collaboration with various U.S. utility partners has been on upgrades that are the first steps to position these legacy control rooms for further full nuclear plant modernization. So, while many nuclear utility owners and operators have taken the first steps toward the digitalization of the control room I&C, LWRS program researchers are not aware of what any utility’s end-state vision is for full control room modernization. Thus, the purpose of this LWRS R&D activity is to start developing an advanced control room interface concept for legacy NPPs and to demonstrate it in the Human Systems Simulation Laboratory (HSSL) at Idaho National Laboratory (INL) so that utility partners can see what a potential end state is for their control room upgrade activities. The end state shows what a fully modernized control room looks like and how it works, and is the result of HFE and I&C work to transition the existing control room and its concept of operations to a new advanced control room configuration. This report documents the planning and analyses performed to install an advanced control room concept in the HSSL. Future LWRS reports will document the process to set up the HSSL and the gPWR with the HSI developed in Halden, and then document how LWRS program researchers at INL and Halden are supporting the capability to conduct future studies by creating additional HSIs that support control room modernization.

99 GENERAL AND MISCELLANEOUS↗

Connecting AmeriFlux to the Globe, Extending the Partnership with Global Flux Network FLUXNET

We propose a project that will extend and expand the activities and contributions of AmeriFlux, to the global stage by working with our international partners to continue operating and expand the functioning of global FLUXNET database. One goal is to produce the next-generation FLUXNET dataset. This will be an integrated dataset on carbon, water and energy fluxes, on meteorological conditions and on the structure and function of the ecosystems; we have to potential to construct a new database, double the size of the La Thuile dataset, with over 2000 site-years of trace gas flux measurements, and supporting meteorological and site meta-data from over 400 sites world-wide. The production of the next FLUXNET database is critical to the activities of this ROSE’s solicitation because these data will drive many of the carbon cycle synthesis activities and the model parameterization and validation activities. A second goal is to build the next-generation, data-system that will house, distribute and query data and discover new information by the broader biogeoscience user community. The third goal is to use these data in synthesis activities that improve our understanding on how climate, weather, ecological, physiological and soil factors govern the exchange of carbon, water and energy between vegetation and the atmosphere at multiple time and space scales. The fourth goal is to act as a coordinator of the project to recruit data, to organize a workshop/conference and to build a community of data sharing and interaction across vast cultural spectrum of participating scientists. The rationale for proposing this work is based on the fact that the vast databases that are produced by flux networks cannot perpetuate and evolve without continued support of the intellectual activities of scientists who produce data, expert in databases, and scientists who use data for modeling. The actuality of a flux network takes human intervention to recruit data from different countries and cultures, to build trust to share data in open-access format, to support data users, and to collaborate. Specifically, we will develop an updated data portal that is easy to navigate and conducive for distributing, visualization, evaluation and discovery of the multiple types of flux and environmental data and information. We will foster collaboration and interactions with our national and international partners and the recruitment of data by: 1) continuing the periodic publication of the newsletter, FLUXLETTER; 2) by hosting an international conference; 3) by coordinating and launching multi-investigator data synthesis activities; and 4) by developing tools that coordinate the development of research papers resulting from the dataset. Data products include raw and gap-filled data at their native time steps (30 minute averages), data products that are integrated on daily and annual time scales and value added products like ecosystem respiration and canopy photosynthesis. Uncertainty analysis and quality control metrics will be produced in coordination with AmeriFlux and ICOS. We will also work with colleagues to expand the scope of FLUXNET beyond carbon dioxide and water vapor, and start archiving the growing methane flux databases that are being collected, world-wide. The interpretation of the flux data relies on good meta-data. We will work with data providers to populate and expand the meta-data archives. We will also work with collaborators to incorporate data from remote sensing products such as MODIS and Landsat, from corresponding climate and weather stations. Another goal is to incorporate new data on canopy structure, with recent LIDAR acquisitions, to populate the data archive with automated soil respiration and understory flux measurements, where available and local climate records for corresponding sites. And, we will collaborate with the TRY database, by merging flux data with plant trait information.

54 ENVIRONMENTAL SCIENCES↗

PV Systems Reliability and Outreach

The project purpose was to collaborate with the Electric Power Research Institute (EPRI) to reach out to the photovoltaic (PV) industry to cooperate, collaborate and facilitate establishment and access to PV plant data for use in the Photovoltaic Reliability Operations and Maintenance (PVROM) database. Sandia National Laboratories (SNL) and EPRI conducted this outreach to expand and accelerate the implementation of PVROM by gathering more data for analyzing trends, with a goal of accelerating the adoption of PV systems as a primary power generation source in the United States. SNL and EPRI analyzed the data from the PVROM database to assess industry trends in operations and maintenance (O&M) and develop guidelines for the industry. More specifically, this project was intended to leverage SNL’s expertise in PV plant reliability data collection and analysis, with data sharing partners that own or operate PV systems who wanted to learn about rigorous reliabilitybased data collection to track issues over time and improve O&M activities. The partnership also worked to host multiple workshops as part of the SNL/EPRI PV Systems Symposium to gather industry feedback on O&M process improvement and data standards, and share insights learned from the collaboration between SNL and EPRI in the area of PV system reliability. Additional outreach included multiple ‘expert elicitation’ interviews led by EPRI to gather best practices and paths forward for improving/standardizing PV plant O&M and asset management practices. Technical accomplishments included further development of the PVROM database process, sharing best practices for reliability data collection and improving industry understanding of existing O&M practices, important knowledge, and new and novel techniques for benefitting EPRI utility partners and the broader PV industry. Improved reliability at a PV power plant leads to a lower levelized cost of energy (LCOE), which is reflected most directly in its operating expenses. Electric utilities that utilize PV as a larger share of plants they own and operate are interested in having a high degree of availability or ‘uptime’, similar to other power generation sources in their service area. Having low cost, reliable PV generation can lead to fewer costs that need to be recovered by the utility over the lifetime of the power plant, and less regulatory uncertainty when considering bulk transmission and distribution system reliability. The public and taxpayers benefit by the electric utility passing through lower electricity costs.

14 SOLAR ENERGY↗

Integration of Solar Training into Allied Professional Development Platforms - Final Technical Report

The Interstate Renewable Energy Council (IREC) designed the “Integration of Solar Training into Allied Professional Development Platforms” project to surmount barriers to the expansion of solar technology caused by gaps in knowledge impacting on-the-job performance of allied professionals. At project start, questionnaires deployed nationally indicated that only 9% of firefighters felt certain they could shut down a PV system to the extent possible, and only a third of code officials thought they could even discern the difference between a PV and solar thermal system. Therefore, the project objective was to measurably and significantly increase the number of code officials and fire service professionals with solar knowledge directly applicable to their job function. IREC identified specific gaps in current knowledge, and integrated research-proven adult learning principles and technology solutions to enable a cost-effect but impactful reach. The project design ensured that solar training is a continuing component of the targeted sector professional development toolkit. To this end, the key partners recruited and cultivated were existing, trusted training partners in the targeted sectors: International Code Council Solar Rating and Certification Corporation (ICC-SRCC), International Association of Electrical Inspectors (IAEI), International Association of Fire Fighters (IAFF) and National Association of State Fire Marshals (NASFM). During the project, IREC held 79 courses in 25 states that trained 4,156 people, offered a PV in the 2017 National Electric Code webinar attended by 787 people, developed on-line training for code officials with 2,298 on-line learners, and developed an on-line training for firefighters with 4,930 on-line learners. In addition, the project participated in 28 conferences and reached over 537,000 professionals with solar information.

14 SOLAR ENERGY↗

Development of LWR fuels with enhanced accident tolerance. Final report

After a tsunami triggered plant black out at the Fukushima Daiichi site, followed by hydrogen explosions, the US Department of Energy partnered with fuel vendors to study safer alternatives to the current UO2 – zirconium alloy fuel system. This accident tolerant fuel (ATF) alternative should better tolerate a loss of cooling in the core for a considerably longer time while maintaining or improving the fuel performance during normal operation conditions. General Electric, Oak Ridge National Laboratory, and their partners are proposing to replace zirconium alloy cladding in current commercial light water power reactors with an iron-chromium-aluminum (FeCrAl) cladding such as APMT, C26M or FeCrAl ODS, which has been named IronClad by GE. Extensive testing and evaluation has been conducted to determine the suitability of FeCrAl for the entire fuel cycle from rod fabrication to used fuel disposition. Most of the environmental characterization was conducted to evaluate the behavior of IronClad under normal operation conditions and under severe accident conditions. Results show that FeCrAl has excellent corrosion resistance under normal operation conditions and FeCrAl is several orders of magnitude more resistant than zirconium alloys to degradation by superheated steam under accident conditions, generating less heat of oxidation and lower amount of combustible hydrogen gas. Higher parasitic neutron absorption and potential tritium release into the coolant effects can be minimized by design and operational measures. IronClad material can be manufactured using traditional melting and forging (C26M) or powder metallurgy processes (APMT & FeCrAl ODS). Tubes can be made to full length of 5 m with a wall thickness of 0.4 mm by pilgering or drawing. The fuel rods can be readily hermetically sealed in an industrial production setting by welding end caps to the thin wall tubing using either TIG or resistance welding. The implementation of FeCrAl IronClad cladding is a near term solution to enhance the safety of the current fleet of commercial light water power reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Solar Tarining for Design Professionals

The Building Codes Assistance Project (BCAP) at the Trust for Conservation Innovation (TCI – now renamed “Multiplier”) partnered with the Center for Sustainable Energy (CSE) to develop and deliver solar training workshops and reference materials to teach building design professionals (individuals involved professionally in architecture or building engineering) about the benefits and technical requirements of incorporating photovoltaics into their building designs. The goal of the project was to eliminate barriers to widespread solar acceptance and support strong growth in the solar sector. These workshops were delivered to design professionals in twenty-two cities, representing a range of small to large design firms. Participants were given pre- and post-training evaluations to gauge effectiveness of the training, and a three-month follow-up survey was used to study whether these workshops assisted in increasing the probability that a designer would incorporate photovoltaics into their building designs. This project produced a trained, experienced, and enthusiastic network of solar trainers and trained almost 600 design professionals. Project also created multiple long-lasting resources to help architects and engineers add solar expertise to their list of qualifications. This includes a full, online training course available long-term for continuing education credit from AIA University. The program was endorsed by the American Institute of Architects (AIA) and ASHRAE, the project partners. The trainings were accepted for continuing education credits from the International Codes Council, the AIA and the United States Green Building Council (USGBC).

14 SOLAR ENERGY↗

A GENERIC MICROGRID CONTROLLER

The main objective of this project was to develop and test a Generic Microgrid Controller (GMC) that provides (1) seamless islanding and reconnection of the microgrid, (2) efficient, reliable, and resilient operation of the microgrid with the required power quality, whether islanded or grid-connected, (3) existing and future ancillary services to the larger grid, (4) the capability for the microgrid to serve the resiliency needs of participating communities, (5) communication with the electric grid utility as a single controllable entity, and (6) increased reliability, efficiency and reduced emissions. The GMC developed under this project was designed to facilitate the deployment of microgrids, to be easily adapted to various microgrid configurations, and reduce up-front engineering costs associated with the design and development of microgrid controllers. Specifically, the GMC: 1. Provides a control structure amenable to accommodating an array of microgrid configurations and a portfolio of functional requirements; 2. Possesses a high level architecture that can readily be adopted by commercial suppliers; 3. Supports unlimited nesting of conforming microgrid control schemes; 4. Integrates into a full-featured Energy Management System (EMS) as a module. A select set of microgrids, operating a variety of microgrid configurations, served as “collaborating microgrid partners” in the project and assured thereby that the GMC developed under this program can readily be applied to microgrids of different sizes, and equipped with various resources, attributes, and equipment. Collaborating microgrid partners included the UCI Medical Center), the Port of Los Angeles, Port of Long Beach, and the Irvine Ranch Water District. The objectives of the project were achieved in two phases: (Phase I) Research, Development and Design (“Design”), and (Phase II) Testing, Evaluation, and Verification (“TEV”). In Phase I, specifications were developed for the GMC and a detailed test plan was established to test the functional requirements of the GMC. The GMC addresses two core functions, transition and dispatch, as well as several optional higher level functions such as economic dispatch, and renewable and load forecasting.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Manhattan District: A Lab-Embedded Entrepreneur Program

The goals of the Manhattan District are to attract top scientific innovators to New Mexico to start businesses that focus on breakthrough national security technologies, support them with access to scientific leaders, partner networks, and funding to ensure success, build economic prosperity locally and nationally, leverage national networks with UC, TAMU, Battelle and strategic partners in industry and venture capital, and build on proven models from other DOE National Labs to enhance NNSA missions.

36 MATERIALS SCIENCE↗

Sustainable Data Evolution Technology (SDET) for Power Grid Optimization (Final Report)

This project develops an innovative sustainable data evolution technology (SDET) to create open-access power grid datasets and facilitate updates to these datasets by the power grid community. The lack of open-access, realistic large-scale datasets significantly limits the ability of researchers, developers and ultimately end users to develop, benchmark and compare new methods and tools for optimizing the operation and planning of the grid, which leads to slow adoption by end users. Available open datasets include the IEEE sponsored 14-300 bus transmission test cases and distribution test feeders, the Edinburgh Power Systems Test Case Archive (39-2224 buses), and the Polish cases (2383-3375 buses) available with MATPOWER. These datasets serve certain purposes, but for power grid optimization, they are insufficient in one or more of these aspects: 1) they are too small; 2) they are incomplete in both models and scenarios for optimization purposes; and 3) they are static and are not keeping up with grid needs. The SDET technology delivers large-scale realistic datasets and data-creation tools capable of generating new datasets. We work closely with the Category-2 data repository project awarded by the same GRID DATA program. The generated datasets and data creation tools are compatible with and available through the data repository. The objective is to make this a sustained effort within and beyond the ARPA-E GRID DATA program so that the datasets can evolve over time and meet the current and future needs for power grid optimization and potentially other applications in power grid operation and planning. The novel and disruptive features of SDET differentiate itself from prior work in the following aspects: 1) SDET derives features and metrics for both transmission and distribution (T&D) systems by analyzing many public and private datasets provided by our industry partners National Rural Electric Cooperative Association (NRECA) and PJM Interconnection (PJM). 2) SDET develops data-creation tools and use these tools to generate large-scale open-access realistic datasets that comply with the metrics for both T&D systems. 3) SDET validates the created datasets using industry tools provided by our vendor partner GE Energy Solution. The data creation tools, as well as the created datasets, are integrated into the data repository (DR. POWER) funded by ARPA-E GRID DATA program in Category 2. Users can use the datasets and access these data creation tools to create and update datasets, thus datasets can evolve per user requirements and power grid development. The SDET is a novel and disruptive technology compared to current ad hoc and static dataset generation. It is expected the SDET technology will fundamentally enhance the development, assessment, and adoption of new methods and tools for power grid optimization and other applications, which in turn would significantly improve the reliability, resiliency, and efficiency of the power grid – a major ARPA-E mission objective.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Technology Integration 2018 Annual Progress Report

The FY 2018 Technology Integration Annual Progress Report covers 28 multi-year projects funded by the Vehicle Technologies Office. The report includes information on 21 competitively awarded projects, ranging from training on alternative fuels and vehicles for first responders, to safety training and design for maintenance facilities housing gaseous fuel vehicles, to electric vehicle community partner programs. It also includes seven projects conducted by several of VTO’s national laboratory partners, Argonne National Laboratory, Oak Ridge National Laboratory and the National Renewable Energy Laboratory. These projects range from a Technical Assistance project for business, industry, government and individuals, to the EcoCar 3 Student Competition, and the Fuel Economy Information Project.

33 ADVANCED PROPULSION SYSTEMS↗

Building Towards Discovery: Preparing for New Physics at the LHC [Final papers]

Particle physics today is at a crossroads. The Standard Model (SM) has survived four decades of experimental scrutiny and spurred multiple landmark discoveries, culminating with the 2012 discovery of the Higgs boson at the Large Hadron Collider (LHC). Yet we know that this model is incomplete. We live in a universe dominated by matter and energy unaccounted for by the SM– and the Higgs boson itself is improbably light. It falls to the current generation of high-energy physicists to go beyond the model and enter a new era of discovery. Andeen is leading a new research group at the University of Texas at Austin (UT-Austin) that is endeavoring to reveal novel physical phenomena through the discovery of new particles with the ATLAS detector at the LHC. A key element of our experience thus far has been collaborating closely with theorists to identify both interesting new physics models. In addition we work closely with electrical engineers in detector development. Our approach is therefore unique in its integration of theory, analysis and instrumentation, and is encapsulated in a three-pronged strategy. First is the essential task of analyzing our rapidly expanding dataset. I am directing my group in searches for vector-like quarks (VLQs). Should they exist, these hypothetical particles would indicate physics scenarios beyond the SM. Experimental constraints suggest VLQs decay preferentially to a third generation quark and a Higgs, W or Z boson. Today at 13 TeV, both multi-lepton (electron and muon) and jet substructure signatures are sensitive to identifying the VLQ decay products. The large Run 2 dataset (collected through 2018) of up to 150 fb -1 will allow us to simultaneously use multi-lepton signatures with jet-substructure in searches for new physics. UT-Austin is well positioned to be a leader in this area. Prof. P. Onyisi’s postdoctoral researchers and graduate students are searching for ttH signatures in three- and four-lepton channels and we benefit from their experience. We are also aided by the availability of the Texas Advanced Computing Center, which provides us with easy access to several high performance computing (HPC) systems. My previous experience in VLQ searches propels the work today. I have published both the first investigation into the single production of top partners (signatures of composite Higgs Models) of any LHC experiment 1 as well as one of the first analyses utilizing jet-substructure techniques to search for the single production of vector-like quarks. 2 Adding to this is my group’s work with the Liquid Argon (LAr) calorimeter, the primary instrument we use in detecting electrons. Second, my group is contributing to the operations of the LAr calorimeter while preparing to install and commission new electronic hardware (the Phase 1 upgrade) to this crucial component of the ATLAS detector. I have played a leading role in the development of a critical, radiation-hard, high-speed Analog-to-Digital Convertor (ADC) that is essential inselecting data collected by the LAr calorimeter. 3 This upgrade will improve the e!ciency with which we can select events in our detector. Postdoctoral researcher N. Nikiforou (based at CERN May 2016 onward) and graduate students (one based at CERN from the start of 2018 onward, with one additional graduate students from summer 2018) are growing our already deep experience in the operation of the LAr calorimeter to prepare for installation and commissioning of the new trigger readout in 2018-2019. My group will then be positioned to be the first to exploit the potential of the improved triggers in our multi-lepton searches for new physics. Third, a suite of preparations for a major detector upgrade, scheduled to be completed in 2024, are underway. My group is building hardware that will improve the electronic readout of the ATLAS detector. I am partnering with a group in the Electrical and Computer Engineering (ECE) Department at UT-Austin (Prof. N. Sun) to employ his work at the cutting edge of ADC research. We will support an ECE grad student for the layout of this design, and collaborate with engineering groups at Nevis Laboratory and the Electrical Engineering Department (Prof. P. Kinget) at Columbia University to integrate our ADC with gain selection circuits. We will provide this critical component of the ASIC at the challenging boundary of the analog and digital signals in the LAr calorimeter readout chain. Furthermore UT-Austin will lead the testing of this device during development and production (approximately 55,000 four-channel chips). This effort compliments my work as the deliverables manager for the LAr front-end ASICs for the US ATLAS HL-LHC project and strengthens the US commitment to that upgrade.In so doing, my group at the UT-Austin will be at the forefront of efforts to probe the structure of the universe to an unmatched degree both at the current LHC and with its future upgrades. Through both the ongoing analysis of data at the ATLAS detector and improvements to the detector itself, an answer to what lies beyond the SM may come within our grasp. My background in instrumentation and analysis allows my group to establish a singular research effort on the ATLAS experiment. In addition to answering fundamental questions about the subatomic world, the technologies developed could advance the broader scientific community and result in valuable spin-offs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Leveraging Connections 2018 Progress Report

This 2018 progress report contains a list of Los Alamos National Laboratory's top innovations of the time, including: Inventing - Los Alamos National Laboratory has been inventing for the past 75 years to accomplish the difficult, the unexpected and at times, what seems impossible. The Feynman Center is rethinking roadmaps for patent and software strategies to enable Los Alamos to achieve greater impact of its innovations; Innovating - The US technology advantage in national security is dependent on continual innovation. Los Alamos’ immense contributions in leading edge science and technology research and development are directed into solving complex and forthcoming national security challenges. Check out the Technology Snapshot platform at https://techsnapshot.lanl.gov to explore Los Alamos’s technologies ready to be developed into disruptive applications; Disrupting - Known well for developing the first nuclear weapon, big and small science at Los Alamos is behind many other disruptive innovations. This year we are highlighting Los Alamos’s leadership in small modular nuclear reactor design and development, work on international nuclear safeguards electronics instrumentation, and first demonstrated deployment of non-destructive testing to measure corrosion in nuclear material storage containers; Partnering - Los Alamos science has assisted partners big and small with their toughest challenges, this year Los Alamos scientists assisted two New Mexico farm owners—Tim Seaman with Manzanar Los Silvestres apple orchard in Abiquiu and Christopher Bassett of Freshies of New Mexico in El Guique — protect their crops from frost.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Uncertainty in master-equation-based rate coefficient calculations

Rate coefficients are key quantities in gas phase kinetics and can be determined theoretically via master equation (ME) calculations. Rate coefficients characterize how fast a certain chemical species reacts away due to collisions into a specific product. Some of these collisions are simply transferring energy between the colliding partners, in which case the initial chemical species can undergo a unimolecular reaction: dissociation or isomerization. Other collisions are reactive, and the colliding partners either exchange atoms, these are direct reactions, or form complexes that can themselves react further or get stabilized by deactivating collisions with a bath gas. The input of MEs are molecular parameters: geometries, energies, and frequencies determined from ab initio calculations. While the calculation of these rate coefficients using ab initio data is becoming routine in many cases, the determination of the uncertainties of the rate coefficients are often ignored, sometimes crudely assessed by varying independently just a few of the numerous parameters, and only occasionally studied in detail. In this study, molecular frequencies, barrier heights, well depths, and imaginary frequencies (needed to calculate quantum mechanical tunneling) were automatically perturbed in an uncorrelated fashion. Our Python tool, MEUQ, takes user requests to change all or specified well, barrier, or bimolecular product parameters for a reaction. We propagate the uncertainty in these input parameters and perform global sensitivity analysis in the rate coefficients for the ethyl + O 2 system using state-of-the-art uncertainty quantification (UQ) techniques via Python interface to UQ Toolkit (www.sandia.gov/uqtoolkit). A total of 10,000 sets of rate coefficients were collected after perturbing 240 molecular parameters. With our methodology, sensitive mechanistic steps can be revealed to a modeler in a straightforward manner for identification of significant and negligible influences in bimolecular reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗