Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Focused wave interactions with floating structures: a blind comparative study

The paper presents results from the Collaborative Computational Project in Wave Structure Interaction (CCP-WSI) Blind Test Series 2. Without prior access to the physical data, participants, with numerical methods ranging from low-fidelity linear models to fully non-linear Navier-Stokes (NS) solvers, simulate the interaction between focused wave events and two separate, taut-moored, floating structures: a hemispherical-bottomed cylinder and a cylinder with a moonpool. The ‘blind’ numerical predictions for heave, surge, pitch and mooring load, are compared against physical measurements. Dynamic time warping is used to quantify the predictive capability of participating methods. In general, NS solvers and hybrid methods give more accurate predictions; however, heave amplitude is predicted reasonably well by all methods; and a WEC-Sim implementation, with CFD-informed viscous terms, demonstrates comparable predictive capability to even the stronger NS solvers. Large variations in the solutions are observed (even among similar methods), highlighting a need for standardisation in the numerical modelling of WSI problems.

42 ENGINEERING↗

AmeriFlux US-A37 ARM-SGP-Waukomis

This is the AmeriFlux version of the carbon flux data for the site US-A37 ARM-SGP-Waukomis. Site Description - The E37 site is located in the middle of a grassy field with a cultivated field to the South, near Waukomis, Oklahoma.

Sullivan, Ryan [Argonne National Laboratory]↗

AmeriFlux US-CU1 UIC Plant Research Laboratory Chicago

This is the AmeriFlux version of the carbon flux data for the site US-CU1 UIC Plant Research Laboratory Chicago. Site Description - The UIC Science and Engineering South building is located in Chicago, Illinois. It is situated near the UIC Plant Research Laboratory, a facility with a greenhouse, outdoor garden space, and open lawn areas and is close to a major highway, with several nearby structures and parking areas.

Raut, Bhupendra [Argonne National Laboratory]↗

AmeriFlux US-A39 ARM-SGP-Morrison

This is the AmeriFlux version of the carbon flux data for the site US-A39 ARM-SGP-Morrison. Site Description - This site is located at ARM SGP Extended Facility 39 near Morrison, OK

Sullivan, Ryan [Argonne National Laboratory]↗

AmeriFlux FLUXNET-1F US-A39 ARM-SGP-Morrison

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-A39 ARM-SGP-Morrison. This is the FLUXNET version of the carbon flux data for the site US-A39 ARM-SGP-Morrison produced by applying the standard ONEFlux (1F) software. Site Description - This site is located at ARM SGP Extended Facility 39 near Morrison, OK

Sullivan, Ryan [Argonne National Laboratory]↗

AmeriFlux FLUXNET-1F US-A37 ARM-SGP-Waukomis

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-A37 ARM-SGP-Waukomis. This is the FLUXNET version of the carbon flux data for the site US-A37 ARM-SGP-Waukomis produced by applying the standard ONEFlux (1F) software. Site Description - The E37 site is located in the middle of a grassy field with a cultivated field to the South, near Waukomis, Oklahoma.

Sullivan, Ryan [Argonne National Laboratory]↗

Hydrodynamics of suspensions of passive and active rigid particles: a rigid multiblob approach

We develop a rigid multiblob method for numerically solving the mobility problem for suspensions of passive and active rigid particles of complex shape in Stokes flow in unconfined, partially confined, and fully confined geometries. As in a number of existing methods, we discretize rigid bodies using a collection of minimally resolved spherical blobs constrained to move as a rigid body, to arrive at a potentially large linear system of equations for the unknown Lagrange multipliers and rigid-body motions. Here we develop a block-diagonal preconditioner for this linear system and show that a standard Krylov solver converges in a modest number of iterations that is essentially independent of the number of particles. Key to the efficiency of the method is a technique for fast computation of the product of the blob-blob mobility matrix and a vector. For unbounded suspensions, we rely on existing analytical expressions for the Rotne-Prager-Yamakawa tensor combined with a fast multipole method (FMM) to obtain linear scaling in the number of particles. For suspensions sedimented against a single no-slip boundary, we use a direct summation on a graphical processing unit (GPU), which gives quadratic asymptotic scaling with the number of particles. For fully confined domains, such as periodic suspensions or suspensions confined in slit and square channels, we extend a recently developed rigid-body immersed boundary method by B. Kallemov, A. P. S. Bhalla, B. E. Griffith, and A. Donev (Commun. Appl. Math. Comput. Sci. 11 (2016), no. 1, 79-141) to suspensions of freely moving passive or active rigid particles at zero Reynolds number. We demonstrate that the iterative solver for the coupled fluid and rigid-body equations converges in a bounded number of iterations regardless of the system size. In our approach, each iteration only requires a few cycles of a geometric multigrid solver for the Poisson equation, and an application of the block-diagonal preconditioner, leading to linear scaling with the number of particles. We optimize a number of parameters in the iterative solvers and apply our method to a variety of benchmark problems to carefully assess the accuracy of the rigid multiblob approach as a function of the resolution. We also model the dynamics of colloidal particles studied in recent experiments, such as passive boomerangs in a slit channel, as well as a pair of non-Brownian active nanorods sedimented against a wall.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

EFT asymptotics: the growth of operator degeneracy

We establish formulae for the asymptotic growth (with respect to the scaling dimension) of the number of operators in effective field theory, or equivalently the number of S-matrix elements, in arbitrary spacetime dimensions and with generic field content. This we achieve by generalising a theorem due to Meinardus and applying it to Hilbert series---partition functions for the degeneracy of (subsets of) operators. Although our formulae are asymptotic, numerical experiments reveal remarkable agreement with exact results at very low orders in the EFT expansion, including for complicated phenomenological theories such as the standard model EFT. Our methods also reveal phase transition-like behaviour in Hilbert series. We discuss prospects for tightening the bounds and providing rigorous errors to the growth of operator degeneracy, and of extending the analytic study and utility of Hilbert series to EFT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Holographic Weyl anomaly in string theory

We compute the worldsheet sphere partition function of string theory on global AdS 3 with pure NS-NS flux. Because of an unfixed Möbius symmetry on the worldsheet, there is a cancellation of infinities and only a part of the answer is unambiguous. We show that it precisely reproduces the holographic Weyl anomaly and the ambiguous terms correspond to the possible counterterms of the boundary CFT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beurling-Selberg extremization and modular bootstrap at high energies

We consider previously derived upper and lower bounds on the number of operators in a window of scaling dimensions [\Delta - \delta,\Delta + \delta] [ Δ − δ , Δ + δ ] at asymptotically large \Delta Δ in 2d unitary modular invariant CFTs. These bounds depend on a choice of functions that majorize and minorize the characteristic function of the interval [\Delta - \delta,\Delta + \delta] [ Δ − δ , Δ + δ ] and have Fourier transforms of finite support. The optimization of the bounds over this choice turns out to be exactly the Beurling-Selberg extremization problem, widely known in analytic number theory. We review solutions of this problem and present the corresponding bounds on the number of operators for any \delta \geq 0 δ ≥ 0 . When 2\delta \in \mathbb Z_{\geq 0} 2 δ ∈ ℤ ≥ 0 the bounds are saturated by known partition functions with integer-spaced spectra. Similar results apply to operators of fixed spin and Virasoro primaries in c>1 c > 1 theories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Gaseous Impurities on Long-Term Thermal Cycling and Aging Properties of Complex Hydrides for Hydrogen Storage

This program was dedicated to understanding the effect of impurities on Long-Term Thermal Cycling and aging properties of Complex Hydrides for Hydrogen Storage. At the start of the program we found reversibility between Li2NH+LiH LiH+LiNH2 (yielding ~5.8 wt.%H capacity). Then we tested the effect of impurity in H2 gas by pressure cycling at 255°C; first with industrial gas containing ppm levels of O2 and H2O as major impurities. Both these impurities had a significant impact on the reversibility and decreased the capacity by 2.65 wt.%H. Further increase in number of cycles from 500 to 1100 showed only a 0.2 wt%H more weight loss, showing some capacity is still maintained after a significant number of cycles. The loss of capacity is attributed to the formation of ~55 wt% LiH and ~30% Li2O, as major contaminant phases, along with the hydride Li2NH phase; suggesting loss of nitrogen during cycling. The effect of 100 ppm H2O in H2 also showed a decrease of ~2.5 wt.%H (after 560 cycles), and 100ppm O2 in H2; a loss of ~4.1 wt.%. Methane impurity (100 ppm, 100cycles), showed a very small capacity loss of 0.9 wt.%H under similar conditions. However, when Li3N was pressure cycled with 100ppmN2-H2 there were beneficial effects were observed (255oC); the reversible capacity increased to 8.4wt.%H after 853 cycles. Furthermore, with 20 mol.%N2-H2 capacity increased to ~10 wt.%H after 516 cycles. We attribute this enhancement to the reaction of nitrogen with liquid lithium during cycling as the Gibbs free energy of formation of Li3N (Go = -98.7 kJ/mol) is more negative than that of LiH (Go = -50.3 kJ/mol). We propose that the mitigation of hydrogen capacity losses is due to the destabilization of the LiH phase that tends to accumulate during cycling. Also more Li2NH phase was found in the cycled product. Mixed Alanates (3LiNH2:Li3AlH6) showed that 7 wt% hydrogen desorbed under dynamic vacuum. Equilibrium experiments (maximum 12 bar H2) showed up to 4wt% hydrogen reversibly stored in the material after the first desorption. The activation energy was found to be 51 kJ/mol, as compared to 81 kJ/mol for pure lithium alanate. It is proposed that based on the data obtained and CALPHAD modeling that the improvement in cycling is due to the formation of pure lithium (liquid at 255°C), which is able to react with nitrogen specifically forming Li3N. The presence of nitrogen in the 80/20 molar mixtures in a hydride bed along with hydrogen causes Li to form Li3N rather than LiH, and subsequently regenerates the Li2NH phase and yields a ~10 wt.%H reversibly.

08 HYDROGEN↗

Preliminary Assessment of Post-Combustion Capture of Carbon Dioxide at the San Juan Generating Station [Draft]

This is a preliminary technical assessment of a proposal to retrofit the San Juan Generating Station in New Mexico, capturing the carbon dioxide (CO 2 ) generated by the power plant and transporting it via pipeline to the Permian Basin in Texas for use in CO 2 enhanced oil recovery (CO 2 -EOR). The assessment was conducted for the U.S. Department of Energy and relies on publicly available information, including a pre-feasibility study developed by Enchant Energy in partnership with Sargent & Lundy. It is focused on technical aspects of the project as related to the proposed capture of CO 2 , the proposed use/storage of CO2, and potential future options for use/storage of CO 2 in the Four Corners region.

02 PETROLEUM↗

MS-SPEAK: Final Report and Implementation Roadmap

This report describes the scope and results of a project undertaken to help consumer-owned electric utilities improve the cybersecurity of their system interfaces. The team developed a cybersecurity reference architecture for the MultiSpeak interoperability standard, which is used by many of these consumer-owned utilities and their supporting vendors. The analysis and use cases focused on the Remote Connect/Disconnect (RCD) interface, and its vulnerabilities. An open-source toolkit has also been developed to facilitate customized intrusion detection systems (IDS) for MultiSpeak applications. This report includes a roadmap for others to use and customize this IDS toolkit for additional MultiSpeak versions and interfaces.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Improved Time-Stepping Methods in Global to Regional Ocean Modeling (Annual Status Report 2020)

Time stepping algorithms are an important part of ocean models, and strongly influence both the accuracy of solution and performance. There have been a number of projects investigating various improvements for ocean time-stepping schemes in the Model for Prediction Across Scales-Ocean (MPAS-Ocean), a component of the DOE Energy Exascale Earth System Model. Ocean dynamics include fast surface gravity waves, which are two-dimensional, and slower internal waves, which are three-dimensional, so ocean models use a split time-stepping scheme that separates these barotropic and baroclinic modes for efficiency. MPAS-Ocean runs on variable-resolution horizontal meshes, and must scale to tens of thousands of cores and millions of horizontal gridcells. Ocean models require time stepping algorithms that are customized to these needs, and which are tuned for performance on various resolutions and architectures.

58 GEOSCIENCES↗

Processing of SOFC Anodes for Enhanced Intermediate Temperature Catalytic Activity at High Fuel Utilization (Final Report)

The overall objective was to infiltrate anodes with nanoparticle catalysts so that anode catalytic performance can be improved as anode operation temperature is reduced from 800°C to intermediate temperatures of 700°C and 600°C and as anode fuel utilization is increased. The addition of nickel nanoparticle catalysts into the anode improves performance by providing additional triple phase boundaries (TPBs), increasing the density of electrochemical reaction sites. To achieve this goal, both liquid phase and vapor phase methods for depositing nickel nanoparticles in the anode active layer, the region of the anode near the electrolyte where the electrochemical reaction occurs. It is imperative that nanoparticles are stable against coarsening during long-term operation, so the mechanisms and kinetics of nanoparticle stability during cell operation will be investigated. Finally, priority is given to processes that are scalable and easily transferable to industry, leveraging existing Ni-YSZ cermet anode technology. Utilizing nickel nanoparticles at different temperatures has different considerations that will be addressed. At the upper end of the intermediate temperature range (800°C), it is important that performance improvement is maintained over long periods by mitigating the instability of nanoparticles. At the middle of the temperature range (700°C), it is important that performance improvement is maintained at high fuel utilizations. At the lower end of the temperature range (600°C), where the performance of cells is poor due to increased resistances, it is important to improve anode performance by significantly increasing the electrochemical reaction site density, while nanoparticle durability is less of an issue. Finally, the objective was to explore mixed ionic and electronic (MIEC) nanoparticle catalysts like GDC to see if 2-phase boundaries can be created to increase the electrochemical reactions at the anode.

20 FOSSIL-FUELED POWER PLANTS↗

Self-Cleaning Cathodes for Endurance to Chromium Poisoning

Chromium (Cr) poisoning remains a significant issue in long-term solid oxide fuel cell (SOFC) operation. While the addition of Cr in the interconnect and balance-of-plant (BOP) materials is effective in improving their resistance to oxidation, it also causes the deposition of resistive phases in the air electrode and thus cell performance loss. Previous work has investigated the mitigation of chromium deposition using getters, Cr diffusion resistant coatings, and more chromium-tolerant air electrode materials. However, these mitigation strategies merely postpone the degradation of performance due to Cr poisoning. Additionally, some strategies require the replacement of components, e.g., use of getters. Here we investigated a new, in-situ Cr poisoning mitigation strategy.

30 DIRECT ENERGY CONVERSION↗