SEARCH · Engineering Papers
Results for “OXIDATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Enhanced delivery of engineered Fe-Mn binary oxides in heterogeneous porous media for efficient arsenic stabilization
Heterogeneity in sediment and aquifer is universal, resulting in preferential flows of injected materials in the high permeability regions and forming flow by-passed zones in the low permeability regions during in-situ subsurface remediation. This adverse effect can considerably delay the completion of remedial operations and significantly increase the cost. Column experiments were designed and conducted to study the transport of starch- and starch-xanthan gum modified Fe-Mn binary oxide particles (SFM and SXFM) in saturated heterogeneous porous media and to reveal the particles’ arsenic (As) stabilization performance. Fine-in-Coarse (FIC) and Coarse-in-Fine (CIF) patterns of heterogeneous packings were set up in the columns. Testing results demonstrated that starch-xanthan gum dual treatment on Fe-Mn binary oxides successfully improved the particles’ migration capability in heterogeneous porous media and their distribution uniformity attributed to the profound shear thinning behavior of xanthan gum solution. The addition of xanthan gum to the system increased the viscosity and shear thinning property of SXFM suspension, making it a better candidate for delivery. Both SFM and SXFM stabilized As in heterogeneously packed sediment collected from a contaminated site, with SXFM showing better stabilization performance than SFM. The stabilization effects of SXFM were 90.7-97.0%, compared to 82.0-95.2% of SFM.
Anion exchange membranes composed of a poly(2,6-dimethyl-1,4-phenylene oxide) random copolymer functionalized with a bulky phosphonium cation
A random copolymer, tris(2,4,6-trimethoxyphenyl) phosphonium functionalized poly(2,6-dimethyl-1,4-phenylene oxide) (PPO-TPQP) was cast from three different solvents: dimethyl sulfoxide (DMSO), ethyl lactate, or a 41:59 vol% mixture of DMSO and ethyl lactate. Solvents were selected via analysis of the Hansen solubility parameters to vary the phase separation of the polymer in the films. An optimized mixture of DMSO and ethyl lactate chosen for film fabrication and this film was contrasted with films cast from the neat constituent solvents. Atomic force microscopy identified domains from nanometer to tens of nanometer sizes, while the light microscopy showed features on the order of micron. SAXS revealed a cation scattering peak with a d-spacing from 7 to 15 A. Trends in conductivity and water diffusion for the membranes vary depending on the solvent from which they are cast. The mixed solvent cast membrane shows a linear Arrhenius behavior indicating fully dissociated cationic/anionic groups, and has the highest bromide conductivity of 3 mS/cm at 95% RH, 90 degrees C. The ethyl lactate cast membrane shows a linear Arrhenius relation in conductivity, but a Vogel-Tamman-Fulcher behavior in its water self-diffusion. While water increases bromide dissociation, water and bromide transport in these films seems to be decoupled. This is particularly true for the film cast from ethyl lactate.
Dynamic imaging of metastable reaction pathways in lithiated cobalt oxide electrodes
Understanding how lithium-ion batteries function down to the atomic level during charge and discharge cycling can provide valuable guidance to optimize structure-property relationships and to design and understand new electrode materials. Lithium insertion and reactions with the electrodes during charge and discharge cycling can occur via metastable structures with complex ordering and related non-equilibrium phenomena. Remarkably, these processes remain still poorly understood despite their significance in the operation of lithium battery systems in critical technologies. In this communication, we present the dynamics of lithium insertion into Co3O4 and the evolution of metastable phases as probed by in-situ transmission electron microscopy, in concert with first principles density functional theory calculations. We show that the initial lithium intercalation reaction occurs with the formation of several metastable and intermediate phases, followed by a sequence of conversion reactions that perturb and expand the cubic-close-packed oxygen array, ultimately generating an end-product of finely dispersed cobalt metal clusters within a Li2O matrix. The calculated non-equilibrium lithiation pathways corroborate with the experimental lithiation voltages, and explain the significant hysteresis that occurs during electrochemical cycling. The data provide new insights into the complexity of solid state lithium electrochemistry in metal oxides that are relevant to advancing lithium battery technology.
The roles of oxygen non-stoichiometry on the electrochemical properties of oxide-based cathode materials
Not Available
Processable conductive graphene/polyethylene nanocomposites: Effects of graphene dispersion and polyethylene blending with oxidized polyethylene on rheology and microstructure
Poor dispersion of graphene in non-polar polymer matrices creates composites with limited applications. A method to improve the dispersion of graphene in polyethylene (PE) via blending PE with oxidized PE (OPE) is examined. Graphene was produced by simultaneous thermal exfoliation and reduction of graphite oxide. Nanocomposites of graphene with PE as well as graphene with PE/OPE-blends were prepared by solvent blending. Improved dispersion of graphene in PE/OPE blends substantially decreases percolation from both rheological (0.3 vol%) and electrical (0.13 vol%) measurements compared to neat PE nanocomposites (1 and 0.29 vol%), respectively. A universal Brownian dispersion of graphene in polymers was concluded similar to that of nanotubes, following the Doi-Edwards theory. Micromechanical models, such as Mori-Tanaka and Halpin-Tsai models, modeled the mechanical properties of the nanocomposites. The nanocomposites microstructure, studied by small angle x-ray scattering, confirmed better dispersion of graphene at lower loadings and the formation of surface fractals in the blend/graphene nanocomposites; whereas only mass fractals were observed in neat PE/graphene nanocomposites.
A fast grain-growth mechanism revealed in nanocrystalline ceramic oxides
Grain growth issues in nanocrystalline ceramic oxides render their highly attractive properties practically unusable due to limited understanding of the underlying grain-growth mechanisms. Two conventional “slow” grain-growth mechanisms, i.e. curvature driven and grain-rotation driven, are shown to be thermally active, and the discovery of a “fast” disorder-driven mechanism is revealed using molecular dynamics simulation on nanocrystalline ceria, in conjunction with experimental observations. We show that this disorder mechanism drives the unexpected fast grain growth observed experimentally during synthesis and irradiation conditions.
Influence of nanovoids on α–α′ phase separation in FeCrAl oxide dispersion strengthened alloy
Not Available
Targeting Oxide Concentration in Tantalum Oxide-Fluoride Anions
The design of both molecular and non-molecular solid materials with specific properties fundamentally relies on the controlled synthesis of crystals with desired functional groups, bonding motifs, polarity, chirality, and more. To this end, fluoride and oxide-fluoride anions have been utilized as basic building units (BBUs) in the synthesis of noncentrosymmetric racemic materials for their ability to create polar axes that facilitate the breaking of an inversion center as demonstrated in a series of compounds with [MF6]2- anions (M = Ti, Zr, Hf). Targeting an analog with a [TaOF5]2- anion, the phase space of (CuO, Ta2O5)/bpy/HF(aq)/H2O (bpy = 2,2′-bipyridine) was investigated and three new compounds with Cu-bpy cations and Ta-fluoride or Ta-oxyfluoride anions were synthesized: [Cu(bpy)2][TaF6], [Cu(bpy)2][Ta2OF10], and [Cu(bpy)F(H2O)2]2[TaF7]∙H2O with the anions [TaF6]-, [Ta2OF10]2-, and [TaF7]2-, respectively. The formation of these anions was found to be a product of both the concentration of hydrofluoric acid in solution and the ratio of metal-oxide starting materials to ligand. This work contributes to the understanding of mixed anion formation in the solid state.
Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells
The carrier transport through the silicon-oxide (SiO x ) layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells has been studied experimentally and by simulation. The current intensity versus voltage (J-V) characteristics of GaIn/n-c-Si/SiO x /n + -poly-Si/Al structures shows a linear Ohmic characteristic, while a non-Ohmic behavior is observed in the samples without the n + -poly-Si contact layer. Conductive Atomic Force Microscopy (c-AFM) images reveal some current spikes on the surface of the samples, which could be related to the transport through pinholes. The simulation results show that 1) a rectification characteristic is obtained when only the tunneling mechanism is included, 2) both the reverse saturation current and the forward current increase when a small amount of transport through pinholes is introduced, and 3) finally a linear Ohmic behavior is observed when the pinhole transport component reaches a certain level. Furthermore, the simulation for whole TOPCon solar cells provides some useful results. For very thin SiO x (< 1.2 nm), the tunneling provides sufficient high tunneling probability and high efficiency TOPCon solar cells can be obtained without transport through pinholes if the passivation is ensured; while for a relatively thick SiO x (> 1.2 nm) without the transport through pinholes, the TOPCon solar cell shows a poor fill factor (FF) with a high series resistance (Rs) because the tunneling does not provide a sufficient high transport channel for carrier transport, and the introduction of a small number of transports through pinholes improves the FF and reduces the Rs, hence improves the PCE. However, a high possibility for carrier going through pinholes reduces all of the performance parameters and degrades PCE for all the cases simulated. Therefore, an optimized pinhole density and size distribution is critical engineering for solar cell performance optimization. However, the establishment of an optimized method to precisely control the pinhole formation and characterization is still on the way.
Work function reduction by BaO: Growth of crystalline barium oxide on Ag(001) and Ag(111) surfaces
Not Available
Arsenic augments the uptake of oxidized LDL by upregulating the expression of lectin-like oxidized LDL receptor in mouse aortic endothelial cells
Although chronic arsenic exposure is a well-known risk factor for cardiovascular diseases, including atherosclerosis, the molecular mechanism underlying arsenic-induced atherosclerosis remains obscure. Therefore, this study aimed to elucidate this molecular mechanism. We examined changes in the mRNA level of the lectin-like oxidized LDL (oxLDL) receptor (LOX-1) in a mouse aortic endothelial cell line, END-D, after sodium arsenite (SA) treatment. SA treatment significantly upregulated LOX-1 mRNA expression; this finding was also verified at the protein expression level. Flow cytometry and fluorescence microscopy analyses showed that the cellular uptake of fluorescence (Dil)-labeled oxLDL was significantly augmented with SA treatment. In addition, an anti-LOX-1 antibody completely abrogated the augmented uptake of Dil-oxLDL. We observed that SA increased the levels of the phosphorylated forms of nuclear factor of kappa light polypeptide gene enhancer in B cells (NF-κB)/p65. SA-induced upregulation of LOX-1 protein expression was clearly prevented by treatment with an antioxidant, N-acetylcysteine (NAC), or an NF-κB inhibitor, caffeic acid phenethylester (CAPE). Furthermore, SA-augmented uptake of Dil-oxLDL was also prevented by treatment with NAC or CAPE. Taken together, our results indicate that arsenic upregulates LOX-1 expression through the reactive oxygen species-mediated NF-κB signaling pathway, followed by augmented cellular oxLDL uptake, thus highlighting a critical role of the aberrant LOX-1 signaling pathway in the pathogenesis of arsenic-induced atherosclerosis. - Highlights: • Sodium arsenite (SA) increases LOX-1 expression in mouse aortic endothelial cells. • SA enhances cellular uptake of oxidized LDL in dose-dependent manner. • SA-induced ROS generation enhances phosphorylation of NF-κB. • SA upregulates LOX-1 expression through ROS-activated NF-κB signaling pathway.
Reveal of Magnetic Domains and Tunable Supercell Structures in Two-dimensional Layered Oxide Thin Film via Differential Phase Contrast Imaging and Atomic-resolution STEM
Explore the source record for details and available documents.
Facet-Dependent Rock-Salt Reconstruction on the Surface of Layered Oxide Cathodes
The surface configuration of pristine layered oxide cathode particles for Li-ion batteries significantly affects the electrochemical behavior, which is generally considered to be a thin rock-salt layer in the surface. Unfortunately, aside from its thin nature and spatial location on the surface, the true structural nature of this surface rock-salt layer remains largely unknown, creating the need to understand its configuration and the underlying mechanisms of formation. Using scanning transmission electron microscopy, we have found a correlation between the surface rock-salt formation and the crystal facets on pristine LiNi0.80Co0.15Al0.05O2 primary particles. It is found that the originally (01 $ \overline{4}\ $) and (003) surfaces of the layered phase result in two kinds of rock-salt reconstructions: the (002) and (111) rock-salt surfaces, respectively. Stepped surface configurations are generated for both reconstructions. The (002) configuration is relatively flat with monoatomic steps while the (111) configuration shows significant surface roughening. Both reconstructions reduce the ionic and electronic conductivity of the cathode, leading to a reduced electrochemical performance.
YCrWO 6 : Polar and Magnetic Oxide with CaTa 2 O 6 -Related Structure
Explore the source record for details and available documents.
LaNi x Fe 1– x O 3–δ as a Robust Redox Catalyst for CO 2 Splitting and Methane Partial Oxidation
The current study reports LaNi 0.5 Fe 0.5 O 3–δ as a robust redox catalyst for CO 2 splitting and methane partial oxidation at relatively low temperatures (~700 °C) in the context of a hybrid redox process. Specifically, perovskite-structured LaNi x Fe 1–x O 3–δ (LNFs) with nine different compositions (x = 0.05–0.5) were prepared and investigated. Among the samples evaluated, LaNi 0.4 Fe 0.6 O 3–δ and LaNi 0.5 Fe 0.5 O 3–δ showed superior redox performance, with ~90% CO 2 and methane conversions and >90% syngas selectivity. The standalone LNFs also demonstrated performance comparable to that of LNF promoted by mixed conductive Ce 0.85 Gd 0.1 Cu 0.05 O 2–δ (CGCO). Long-term testing of LaNi 0.5 Fe 0.5 O 3–δ indicated that the redox catalyst gradually loses its activity over repeated redox cycles, amounting to approximately 0.02% activity loss each cycle, averaged over 500 cycles. This gradual deactivation was found to be reversible by deep oxidation with air. Further characterizations indicated that the loss of activity resulted from a slow accumulation of iron carbide (Fe 3 C and Fe 5 C 2 ) phases, which cannot be effectively removed during the CO 2 splitting step. Reoxidation with air removed the carbide phases, increased the availability of Fe for the redox reactions via solid-state reactions with La 2 O 3 , and decreased the average crystallite size of La 2 O 3 . As a result, reactivating the redox catalyst periodically, e.g., once every 40 cycles, was shown to be highly effective, as confirmed by operating the redox catalyst over 900 cumulative cycles while maintaining satisfactory redox performance.
Autothermal Chemical Looping Oxidative Dehydrogenation of Ethane: Redox Catalyst Performance, Longevity, and Process Analysis
Energy-efficient upgrading of stranded ethane from shale gas to olefins holds the promise of increasing the supply of useful chemical feedstocks while reducing flaring-based CO 2 emissions. Previously, we reported a modular ethane-to-liquids (M-ETL) system based on a chemical looping oxidative dehydrogenation (CL-ODH) scheme. In this article, we present long-term (>1200 h) results of Li 2 CO 3 -promoted La 0.8 Sr 0.2 FeO 3 corresponding to ~4125 CL-ODH cycles in a large laboratory-scale packed bed reactor. Temperature monitoring along the bed length confirmed the exothermicity of both the oxidative dehydrogenation and regeneration steps, enabling an autothermal operation. Product gas analysis indicated that the redox catalyst maintains a high C 2+ selectivity (~90%) and ethane conversion (~67%) at 735 °C after continuous cycling of >1000 h. As a result, product distributions and heats of reactions were used to update our M-ETL process model for revised techno-economic analysis, demonstrating that the current system is economically viable with relatively low required selling prices across a wide range of operating scenarios.