Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Use of Sensors and Machine Learning for Signal Discovery in a Solvent Extraction Process – 23280

Reprocessing is an important step in the nuclear fuel cycle where usable nuclear materials are extracted from spent fuel for recycling. The extraction of materials for reuse simultaneously reduces not only the volume of nuclear waste, but its decay time to radioactivity levels similar to that of the originating uranium ore. As part of an initiative to steward research, development, and innovation into the nuclear fuel cycle, Idaho National Laboratory is designing and constructing a solvent extraction testbed named Beartooth. Beartooth will allow researchers to refine extraction processes, test innovative extraction processes, and give early career scientists opportunities to gain skills in performing separations chemistry that uses centrifugal contactors. In addition, the Beartooth testbed is being uniquely designed to enable novel technologies including machine learning capabilities for the characterization of chemical process operations in near real-time. To aid in the design of Beartooth, a team of researchers are installing a variety of atypical sensors into a system of contactors for signal discovery. The team will implement machine learning methods on sensor data to determine signal features with the goal of providing a process operator with a deeper understanding of the chemical process and equipment usage. This work will summarize sensors utilized and preliminary results from an infrared camera.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Use of Sensors and Machine Learning for Signal Discovery in a Solvent Extraction Process

Reprocessing is an important step in the nuclear fuel cycle where usable nuclear materials are extracted from used fuel for recycling. The separation of materials for reuse simultaneously reduces not only the volume of nuclear waste, but its decay time to radioactivity levels similar to that of the originating uranium ore. As part of an initiative to steward research, development, and innovation into the nuclear fuel cycle, Idaho National Laboratory is designing and constructing a solvent extraction testbed named Beartooth. This testbed will allow researchers to refine separation processes, test innovative extraction processes, and give early career scientists opportunities to gain skills in performing separations chemistry utilizing centrifugal contactors. In addition, the Beartooth testbed is being uniquely designed to enable novel technologies including machine learning capabilities for the characterization of chemical process operations in near real-time. To aid in the design of Beartooth, a team of researchers are installing a variety of atypical sensors into a system of contactors for signal discovery. The team will implement machine learning methods on acquired sensor data to extract signal features. The goal is to provide a process operator with a deeper understanding of the chemical process and equipment usage. This work will summarize sensors utilized and preliminary results from an infrared camera.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

More Than Energy: Coal as a Mineral Resource

Brochure on Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative, an Energy & Environmental Research Center and U.S. Department of Energy project. Explores the benefits of utilizing lignite coal from the Williston Basin.

01 COAL, LIGNITE, AND PEAT↗

Preview: What is the Overall Picture?

Infographic on the Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative, an Energy & Environmental Research Center–U.S. Department of Energy project, featuring flowcharts depicting potential pathways from unmined lignite to final products.

01 COAL, LIGNITE, AND PEAT↗

Utilizing Gamma Signals to Find Optimal Uranium Wells

Uranium is a very important resource when using nuclear power. Only a small fraction of the uranium we use in the US is domestically sourced. Our goal is to effectively find and mine uranium in a way that is generally accurate and not difficult. Using computer science and machine learning, we want to automate a reasoning system that geologists use to analyze where the uranium ore bodies are. Presenting a general explanation of the goals and impacts of this project for the High School Intern showcase.

58 - GEOSCIENCES↗

Machine Learning for Well Log Analysis in Uranium Mining

This project explores the use of Artificial Intelligence (AI) and Machine Learning (ML) techniques to automate well log analysis for uranium mining. Geophysical log data—spontaneous potential, resistivity, and gamma ray—were used to classify lithology, correlate well logs and identify roll front zonation patterns, which are critical for locating uranium ore bodies. Supervised ML algorithms such as eXtreme Gradient Boosting (XGBoost), Categorical Boosting (CatBoost), and Random Forest were trained to classify lithology with high accuracy. Gradient Boosting Machines (GBM), XGBoost, Random Forest, and Neural Networks were also used for role front zone identification. Moreover, a Fast Dynamic Time Warping (FastDTW) algorithm was employed for well log correlation. Additionally, sample lag was addressed using dynamic programming. Results demonstrate the potential of AI and ML to streamline well log analysis and enhance uranium exploration workflows.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Complete genome sequence of Desulfomicrobium baculatum type strain (XT)

Desulfomicrobium baculatum is the type species of the genus Desulfomicrobium, which is the type genus of the family Desulfomicrobiaceae. It is of phylogenetic interest because of the isolated location of the family Desulfomicrobiaceae within the order Desulfovibrionales. D. baculatum strain XT is a Gram-negative, motile, sulfate-reducing bacterium isolated from water-saturated manganese carbonate ore. It is strictly anaerobic and does not require NaCl for growth, although NaCl concentrations up to 6percent (w/v) are tolerated. The metabolism is respiratory or fermentative. In the presence of sulfate, pyruvate and lactate are incompletely oxidized to acetate and CO2. Here we describe the features of this organism, together with the complete genome sequence and annotation. This is the first completed genome sequence of a member of the deltaproteobacterial family Desulfomicrobiaceae, and this 3,942,657 bp long single replicon genome with its 3494 protein-coding and 72 RNA genes is part of the Genomic Encyclopedia of Bacteria and Archaea project.

59 BASIC BIOLOGICAL SCIENCES↗

CHAPTER 5-RADIOACTIVE WASTE MANAGEMENT

The ore pitchblende was discovered in the 1750's near Joachimstal in what is now the Czech Republic. Used as a colorant in glazes, uranium was identified in 1789 as the active ingredient by chemist Martin Klaproth. In 1896, French physicist Henri Becquerel studied uranium minerals as part of his investigations into the phenomenon of fluorescence. He discovered a strange energy emanating from the material which he dubbed 'rayons uranique.' Unable to explain the origins of this energy, he set the problem aside. About two years later, a young Polish graduate student was looking for a project for her dissertation. Marie Sklodowska Curie, working with her husband Pierre, picked up on Becquerel's work and, in the course of seeking out more information on uranium, discovered two new elements (polonium and radium) which exhibited the same phenomenon, but were even more powerful. The Curies recognized the energy, which they now called 'radioactivity,' as something very new, requiring a new interpretation, new science. This discovery led to what some view as the 'golden age of nuclear science' (1895-1945) when countries throughout Europe devoted large resources to understand the properties and potential of this material. By World War II, the potential to harness this energy for a destructive device had been recognized and by 1939, Otto Hahn and Fritz Strassman showed that fission not only released a lot of energy but that it also released additional neutrons which could cause fission in other uranium nuclei leading to a self-sustaining chain reaction and an enormous release of energy. This suggestion was soon confirmed experimentally by other scientists and the race to develop an atomic bomb was on. The rest of the development history which lead to the bombing of Hiroshima and Nagasaki in 1945 is well chronicled. After World War II, development of more powerful weapons systems by the United States and the Soviet Union continued to advance nuclear science. It was this defense application that formed the basis for the commercial nuclear power industry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a portal monitor for UF6 cylinder verification

International Atomic Energy Agency (IAEA) inspectors currently perform periodic inspections at uranium enrichment plants to verify UF6 cylinder enrichment declarations. Measurements are performed with handheld high-resolution sensors on a sampling of cylinders taken to be representative of the facility’s operations. As additional enrichment plans come online to support the expansion of nuclear power, reducing person-days of inspection will take on greater importance. Pacific Northwest National Laboratory (PNNL) is developing a concept to automate the verification of enrichment plant cylinders to enable 100% product-cylinder verification and potentially, mass-balance calculations on the facility as a whole (by also measuring feed and tails cylinders). The Automated Cylinder Enrichment Verification System (ACEVS) would be located at key measurement points and will positively identify each cylinder, measure its mass and enrichment, store the data along with operator inputs in a secure database, and maintain continuity of knowledge on measured cylinders until IAEA inspector arrival. Given the potential for reduced inspector presence, the operational and manpower-reduction benefits of the portal concept are clear. However, it is necessary to assess whether the cylinder portal concept can meet, or potentially improve upon, today’s U-235 enrichment assay performance. PNNL’s ACEVS concept utilizes sensors that could be operated in an unattended mode: moderated He-3 neutron detectors and large NaI(Tl) scintillators for gamma-ray spectroscopy. The medium-resolution NaI(Tl) scintillators are a sacrifice in energy resolution but do provide high collection efficiency for signatures above 1 MeV. The He-3/NaI sensor combination allows the exploitation of additional, more-penetrating signatures than those currently utilized: Neutrons produced from F-19(μ,n) reactions (spawned primarily from U-234 alpha emission) and high-energy gamma rays (extending up to 10 MeV) induced by neutrons interacting in the steel cylinder. These signatures are indirect measures of U-235 that require a relatively stable U-234/U-235 ratio in the product material in order to be useful. The hypothesis of this work is that the U-234/U-235 ratio is sufficiently constant, for the specific facility where the automated system is installed, to rely on neutron and high-energy gamma-ray signatures for indirect measurement of U-235. Further, these highly penetrating signatures can be combined with a modified form of NaI-based 185-keV enrichment measurements to meet target uncertainties for the verification of product cylinders, with the additional benefits of full-volume assay of the cylinder and 100% product-cylinder verification (as opposed to today’s sampling-based approach). This paper focuses on the enrichment measurement aspects of the ACEVS concept: neutron and high-energy gamma-ray signatures, the radiation sensors designed to collect those signatures, and proof-of-principle cylinder measurements and analysis. Preliminary analysis indicates that an automated cylinder verification approach has the potential to meet target uncertainty values for 30B products cylinders (5%), assuming ore-based enrichment feed and a facility-specific calibration. Also described is the additional work needed to more definitively assess the concept’s viability, particularly through a better understanding of the U-234/U-235 ratio variability in modern enrichment plants.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Transformation of ferrihydrite in the presence or absence of trace Fe(II): The effect of preparation procedures of ferrihydrite

Two-line ferrihydrite was prepared by two different procedures. In procedure 1, which is widely used, ferrihydrite (named as ferrihydrite-1) was prepared by droping NaOH solution into Fe(III) solution. In procedure 2, which is rarely reported, ferrihydrite (named as ferrihydrite-2) was prepared by adding Fe(III) and NaOH solutions into a certain volume of water simultaneously. The results showed that mixing procedures of Fe(III) and alkaline were critical in the sub-microstructures and the conversion mechanisms of ferrihydrites in the presence or absence of trace Fe(II). The sub-microstructure of ferrihydrite-1 favored the mechanism of its dissolution re-crystallization and hematite nanoparticles with rough surface were obtained. The sub-microstructure of ferrihydrite-2 favored the solid state transformation from ferrihydrite to hematite and hematite nanoparticles with smooth surface were formed. These research results will be helpful for us to control the synthesis of hematite nanoparticles with different surface state. - Graphical abstract: Ferrihydrites prepared by mixing Fe{sup 3+} and NaOH solutions according to different procedures can rapidly transform into hematite particles with different surface structures in the presence of trace Fe(II).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hexaferrites and phase relations in the iron-rich part of the system Sr-La-Co-Fe-O

The iron rich part of the system was examined in the temperature range of 1200-1380 deg. C in air, with focus on the solid solutions of M-type hexaferrites. Samples of suitable compositions were studied by electronprobe microanalysis (EPMA). Substituted Sr-hexaferrites in the system Sr-La-Co-Fe-O do not follow the 1:1 substitution mechanism of La/Co in M-type ferrites. Due to the presence and limited Co{sup 2+}-incorporation Fe{sup 3+}-ions are reduced to Fe{sup 2+} within the crystal lattice to obtain charge balance. In all examined M-type ferrites divalent iron is formed, even at 1200 deg. C. The substitution principle Sr{sup 2+}+Fe{sup 3+}reversibleLa{sup 3+}+(Fe{sup 2+}, Co{sup 2+}) yields to the general substitution formula for the M-type hexaferrite Sr{sup 2+}{sub 1-x}La{sup 3+}{sub x}Fe{sup 2+}{sub x-y}Co{sup 2+}{sub y}Fe{sup 3+}{sub 12-x}O{sup 19} (0<=x<=1 and 0<=y<=x). In addition Sr/La-perovskite{sub SS} ({sub SS}=solid solution), Co/Fe-spinel{sub SS}, hematite and magnetite are formed. Sr-hexaferrite exhibits at 1200 deg. C a limited solid solution with small amounts of Fe{sup 2+} (SrFe{sub 12}O{sub 19}reversibleSr{sub 0.3}La{sub 0.7}Co{sub 0.5}Fe{sup 2+}{sub 0.2}Fe{sub 11.3}O{sub 19}). At 1300 and 1380 deg. C a continuous solid solution series of the M-type hexaferrite is stable. SrFe{sub 12}O{sub 19} and LaCo{sub 0.4}Fe{sup 2+}{sub 0.6}Fe{sub 11}O{sub 19} are the end members at 1300 deg. C. The maximum Fe{sup 2+}O content is about 13 mol% in the M-type ferrite at 1380 deg. C (LaCo{sub 0.1}Fe{sup 2+}{sub 0.9}Fe{sub 11}O{sub 19}). - Graphical abstract: M-type hexaferrite solid solution series Sr{sub 1-x}La{sub x}Fe{sup 2+}{sub x-y}Co{sup 2+}{sub y}Fe{sup 3+}{sub 12-x}O{sup 19} (0<=x<=1 and 0<=y<=0.40) at 1300 deg. C; M-type contains significant amounts of FeO even at 1200 deg. C; blue=data from electronprobe microanalyses; SF{sub 6}=SrFe{sup 3+}{sub 12}O{sub 19}; LCoFf{sub 6}=LaCo{sub 0.4}Fe{sup 2+}{sub 0.6}Fe{sup 3+}{sub 11}O{sub 19}; S=SrO; L=La{sub 2}O{sub 3}; Co=CoO; F=Fe{sub 2}O{sub 3}; f=FeO.

36 MATERIALS SCIENCE↗

Magnetite and magnetite/silver core/shell nanoparticles with diluted magnet-like behavior

In the present work is reported the use of the biopolymer chitosan as template for the preparation of magnetite and magnetite/silver core/shell nanoparticles systems, following a two step procedure of magnetite nanoparticles in situ precipitation and subsequent silver ions reduction. The crystalline and morphological characteristics of both magnetite and magnetite/silver core/shell nanoparticles systems were analyzed by high resolution transmission electron microscopy (HRTEM) and nanobeam diffraction patterns (NBD). The results of these studies corroborate the core/shell morphology and the crystalline structure of the magnetite core and the silver shell. Moreover, magnetization temperature dependent, M(T), measurements show an unusual diluted magnetic behavior attributed to the dilution of the magnetic ordering in the magnetite and magnetite/silver core/shell nanoparticles systems. - Graphical abstract: Biopolymer chitosan was used as stabilization media to synthesize both magnetite and magnetite/silver core/shell nanoparticles. Results of HRTEM and NBD patterns confirm core/shell morphology of the obtained nanoparticles. It was found that the composites show diluted magnet-like behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The transformation of ferrihydrite in the presence of trace Fe(II): The effect of the ammonia, amine and the coordination ions of Fe(III)

This work examined Fe(II)-induced transformation of ferrihydrite in the presence of ammonia, amine and the coordination ions of Fe(III). Our earlier results showed that ferrihydrite transformed into the mixture of lepidocrocite, goethite and/or hematite in the presence of trace Fe(II) and absence of ammonia and similar species. However, the formation of lepidocrocite was restrained when using ammonia as precipitants. When introducing some amines (e.g. ethanolamine and diethanolamine) and some coordination ions (e.g. F{sup -} and C{sub 2}O{sub 4}{sup 2-} ions) into the reaction system, a similar effect on the transformation of ferrihydrite was found. Probably, the complexes formed between Fe(III) and those additives favor the formation of goethite. At the same time, the introduction of these additives hinders Fe(II) from interacting with ferrihydrite, which makes the catalytic dissolution of ferrihydrite be limited, thus, the formation of lepidocrocite be restrained. - Graphical Abstract: Fe(II)-induced transformation of ferrihydrite in the presence of ammonia, amine and coordination ions of Fe(III) was studied. The introduction of the additives favors the formation of goethite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Sn{sup 4+} and Sn{sup 4+}/Mg{sup 2+} doping on structural features and visible absorption properties of {alpha}-Fe{sub 2}O{sub 3} hematite

Pure, Sn-doped and Mg/Sn co-doped {alpha}-Fe{sub 2}O{sub 3} hematite samples were synthesized by precipitation process. Fe{sub 2}O{sub 3} is the most popular red mineral pigment which is used largely in traditional ceramics, tar and concrete. The compounds were characterized by powder X-ray diffraction (XRD), scanning transmission electronic microscopy (energy dispersive X-ray cartography), Moessbauer spectroscopy, magnetic investigations versus temperature and visible-NIR spectroscopy. Both {sup 57}Fe and {sup 119}Sn Moessbauer analyses combined with rietveld XRD refinements are the ideal techniques to characterize tin-iron oxides. Hence, thanks to these techniques it was shown how the synthesis temperature influences directly the grain size and the dopants concentration limit which can be incorporated into the host hematite matrix. The stabilization of these tetravalent and divalent dopants into the hematite framework leads to reduce the crystal growth and to limit the (AF) ordering due to the formation of cationic vacancies. The study of the Morin magnetic transition emphasizes this demonstration. In a second part, the influence of the dopants incorporation on the material color was investigated in order to show which key parameters allow improving the red color saturation of iron oxides. In order to improve the red color of the hematites, it was shown that the introduction of cationic vacancies-limiting the octahedral distortion thanks to the interruption of the dissymmetric metal-metal orbital coupling-is the key point. Vacancies are created by Sn{sup 4+}, doping for an increase of the introduced Sn{sup 4+} concentration; it acts to the detriment of the color saturation. - Graphical Abstract: Sn-doped or Sn/Mg-doped Fe{sub 2}O{sub 3} hematites, were analyzed by X-ray diffraction refinement, Moessbauer spectroscopy, magnetic characterization and TEM investigations. Their color is correlated to the doping ions concentration.

36 MATERIALS SCIENCE↗

Studies on the controllable transformation of ferrihydrite

Ferrihydrite was prepared by two different procedures. Ferrihydrite-1 was prepared by dropping NaOH solution into Fe(III) solution. Ferrihydrite-2 was prepared by adding Fe(III) and NaOH solutions into a certain volume of water simultaneously. Our earlier results obtained at {approx}100 {sup o}C have shown that the structure of ferrihydrite-2 favors its solid state transformation mechanism. Further research reveals that the structure of ferrihydrite-2 favors its dissolution re-crystallization mechanism at a temperature of {<=}60 {sup o}C. Based on the transformation mechanism of ferrihydrite at different temperatures, the controllable transformation from ferrihydrite to various iron (hydr)oxides such as lepidocrocite, goethite, hematite and magnetite can be achieved by adjusting the pH, transformation temperature, transformation time, the amount of Fe(II) as well as the preparation procedures of ferrihydrite. The results in the present paper give a nice example that the transformation of a precursor can be controlled with the help of mechanism. - Graphical abstract: The transformations from ferrihydrite to lepidocrocite, goethite, hematite or magnetite can be controlled with the help of mechanism.

36 MATERIALS SCIENCE↗

Investigation of structural, morphological, luminescent and thermal properties of combusted aluminium-based iron oxide

Nanocomposites of aluminium integrated hematite {alpha}-Fe{sub 2}O{sub 3} are synthesized by combustion route using aqueous solutions of AR grade ferric trichloride and aluminium nitrate as precursors. The influence of aluminium incorporation on to the morphology, XPS, photoluminescence and thermal properties has been investigated. The FESEM and AFM micrographs depict that the samples are compact and have homogeneously distributed grains of varying sizes ({approx}20-60 nm). Chemical composition and valence states of constituent elements in hematite are analyzed by XPS. In room temperature photoluminescence (PL) study, we observed strong violet emission around 436 nm without any deep-level emission and a small PL FWHM indicating that the concentrations of defects are responsible for deep-level emissions. The specific heat and thermal conductivity study shows the phonon conduction behavior is dominant. We studied interparticle interactions using complex impedance spectroscopy. We report a new potential candidate for its possible applications in optoelectronics and magnetic devices. -- Graphical abstract: Frequency and temperature dependent interparticle interactions like grains, grain boundary effects using complex impedance spectroscopy of pure and 10 at% Al:Fe{sub 2}O{sub 3} have been studied. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of the surface chemistry and morphology of single walled carbon nanotube-magnetite composites

The study of the morphologies of the single walled carbon nanotube (SWCNT), magnetite nanoparticles (MNP), and the composite based on them was carried with combined X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). These techniques together with thermogravimetric analyses (TGA) and diffuse reflectance infrared transform spectroscopy (DRIFTS) confirmed the production of pure single phases, and that the composite material consisted of MNP attached to the outer surface of the SWCNT. The Moessbauer spectroscopy (MS) research showed the presence of a large quantity of Lewis acid sites in the highly dispersed magnetite particles supported on the SWCNT outer surface. The DRIFTS carbon dioxide adsorption study of the composites revealed significant adsorption of carbon dioxide, fundamentally in the Lewis acid sites. Then, the Lewis acid sites were observed to be catalytically active. Further, the electron exchange between the Lewis acid sites and the basic or amphoteric adsorbed molecules could influence the magnetic properties of the magnetite. Consequently, together with this first ever use of MS in the study of Lewis acid sites, this investigation revealed the potential of the composites for catalytic and sensors applications. -- Graphical abstract: A large amount of Lewis acid sites were found in the highly dispersed magnetite which is supported on the SWCNT outer surface. Display Omitted Research highlights: {yields} The obtained materials were completely characterized with XRD, Raman and SEM-TEM. {yields} DRIFT, TGA and adsorption of the composites allowed understand the material formation. {yields} This is the first report of a study of Lewis sites by Moessbauer spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanosized copper ferrite materials: Mechanochemical synthesis and characterization

Nanodimensional powders of cubic copper ferrite are synthesized by two-steps procedure of co-precipitation of copper and iron hydroxide carbonates, followed by mechanochemical treatment. X-ray powder diffraction, Moessbauer spectroscopy and temperature-programmed reduction are used for the characterization of the obtained materials. Their catalytic behavior is tested in methanol decomposition to hydrogen and CO and total oxidation of toluene. Formation of nanosized ferrite material is registered even after one hour of milling time. It is established that the prolonging of treatment procedure decreases the dispersion of the obtained product with the appearance of Fe{sub 2}O{sub 3}. It is demonstrated that the catalytic behavior of the samples depends not only on their initial phase composition, but on the concomitant ferrite phase transformations by the influence of the reaction medium. -- Graphical abstract: It is demonstrated that the catalytic behavior of the obtained copper ferrites depends not only on their initial phase composition, but on the concomitant phase transformations by the influence of the reaction medium. Display Omitted Highlights: {yields} Two-step co-precipitation-ball-milling procedure for copper ferrites preparation. {yields} The phase composition of ferrites depends on the milling duration. {yields} Ferrites transforms under the reaction medium, which affects their catalytic behavior. {yields} Ferrites decompose to magnetite and carbides during methanol decomposition. {yields} Agglomeration and further crystallization of ferrite occur during toluene oxidation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗