Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Linearization of an Electron Beam’s Longitudinal Phase Space Using a Hollow-Channel Plasma

The removal of undesired beam nonlinear energy chirp (time-energy correlation) or linearization of the beam longitudinal phase space (LPS) is crucial for high-brightness linac-based scientific applications, such as x-ray free-electron lasers. In this paper, we propose that a low-density hollow channel plasma can be used as a near-ideal passive linearizer to significantly linearize the beam LPS and, at the same time, preserve the beam emittance. Physically, the passage of the beam through the hollow plasma channel excites a strong quasicosinoidal longitudinal wakefield that acts to mitigate the beam nonlinear energy chirp by superimposing a reverse chirp on the beam. The theoretical analyses and large-scale three-dimensional start-to-end simulations confirm that the beam longitudinal phase space can be almost completely linearized without noticeable beam emittance growth. In conclusion, application of such a near-ideal linearizer may significantly improve the performance of numerous accelerator-based applications.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

CAKE: Consistent Automatic Kinetic Equilibrium reconstruction

Magnetohydrodynamic equilibrium reconstructions with kinetic constraints are an essential input of many tokamak stability and transport analysis work- flows. The reconstructions themselves also contain useful information about pressure and current density distributions within the plasma which can be used to drive other calculations. While standardized magnetic-only, and partially kinetic equilibrium reconstruction is widely available and used, re- constructions for well diagnosed machines such as DIII-D, that incorporates a large and heterogeneous set of internal diagnostic measurements yet robustly reaching high numerical accuracy have been a time intensive, manual process. The Consistent Automatic Kinetic Equilibrium reconstruction tool (CAKE) has been developed and implemented at DIII-D for producing low error, kinetically constrained reconstructions without human intervention, and to identify strategies for doing so that would be broadly applicable. Here, the techniques employed to allow CAKE to handle data of limited quality and availability, as well as the full automation of the workflow may assist future efforts to form kinetic constraint profiles in real time plasma control applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Multiresolution convolutional autoencoders

Herein we propose a multi-resolution convolutional autoencoder (MrCAE) architecture that integrates and leverages three highly successful mathematical architectures: (i) multigrid methods, (ii) convolutional autoencoders and (iii) transfer learning. The method provides an adaptive, hierarchical architecture that capitalizes on a progressive training approach for multiscale spatio-temporal data. This framework allows for inputs across multiple scales: starting from a compact (small number of weights) network architecture and low-resolution data, our network progressively deepens and widens itself in a principled manner to encode new information in the higher resolution data based on its current performance of reconstruction. Basic transfer learning techniques are applied to ensure information learned from previous training steps can be rapidly transferred to the larger network. As a result, the network can dynamically capture different scaled features at different depths of the network. The performance gains of this adaptive multiscale architecture are illustrated through a sequence of numerical experiments on synthetic examples and real-world spatial-temporal data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

From oxide epitaxy to freestanding membranes: Opportunities and challenges

Motivated by the growing demand to integrate functional oxides with dissimilar materials, numerous studies have been undertaken to detach a functional oxide film from its original substrate, effectively forming a membrane, which can then be affixed to the desired host material. This review article is centered on the synthesis of functional oxide membranes, encompassing various approaches to their synthesis, exfoliation, and transfer techniques. First, we explore the characteristics of thin-film growth techniques with emphasis on molecular beam epitaxy. We then examine the fundamental principles and pivotal factors underlying three key approaches of creating membranes: (i) chemical lift-off, (ii) the two-dimensional layer–assisted lift-off, and (iii) spalling. We review the methods of exfoliation and transfer for each approach. Last, we provide an outlook into the future of oxide membranes, highlighting their applications and emerging properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Analysis of the Challenges in Developing Sample-Based Multi-fidelity Estimators for Non-deterministic Models

Multifidelity (MF) uncertainty quantification (UQ) seeks to leverage and fuse information from a collection of models to achieve greater statistical accuracy with respect to a single-fidelity counterpart, while maintaining an efficient use of computational resources. Despite many recent advancements in MF UQ, several challenges remain and these often limit its practical impact in certain application areas. In this manuscript, we focus on the challenges introduced by nondeterministic models to sampling MF UQ estimators. Nondeterministic models produce different responses for the same inputs, which means their outputs are effectively noisy. MF UQ is complicated by this noise since many state-of-the-art approaches rely on statistics, e.g., the correlation among models, to optimally fuse information and allocate computational resources. Here, we demonstrate how the statistics of the quantities of interest, which impact the design, effectiveness, and use of existing MF UQ techniques, change as functions of the noise. With this in hand, we extend the unifying approximate control variate framework to account for nondeterminism, providing for the first time a rigorous means of comparing the effect of nondeterminism on different multifidelity estimators and analyzing their performance with respect to one another. Numerical examples are presented throughout the manuscript to illustrate and discuss the consequences of the presented theoretical results.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Impact of the Earthquake Rupture on Ground-Motion Variability of the 24 August 2016 M w 6.2 Amatrice, Italy, Earthquake

Here, the devastating 24 August 2016 M w 6.2 earthquake that struck Amatrice, Italy, marked the beginning of a prolonged seismic sequence dominated by three subsequent M w ≥6.0 events in the central Apennines region. The earthquake destroyed Amatrice’s historic center, claiming the lives of 299 individuals and causing widespread damage in the neighboring villages. The severity of the ground shaking, with a recorded maximum acceleration of 850 cm/s 2 on the east–west component at the Amatrice station, was far greater than the predicted acceleration based on the Italian ground-motion model (GMM). As pointed out by several investigations, the observed ground-motion amplitude and its spatial variability during the earthquake can be linked to specific rupture characteristics, including slip distribution and rupture directivity effects revealed by the observed data (Tinti et al., 2016; Pischiutta et al., 2021). In this study, we conducted physics-based 3D numerical simulations of ground motion for the Amatrice earthquake for frequencies up to 3 Hz. We employed a series of kinematic rupture models and a well-constrained local 3D velocity model incorporating surface topography. The kinematic rupture realizations were generated using multiscale hybrid and fully stochastic models, following the technique proposed by Graves and Pitarka (2016). We focused on assessing the sensitivity of near-fault ground-motion amplitudes to earthquake rupture characteristics, in particular, the spatial slip pattern. To evaluate the quality of our simulations, we employed goodness-of-fit measurements performed in comparisons of simulated and recorded ground motions. The simulated ground motions compare well with the recorded data and predictions from GMMs for Italy, ITA18 (Lanzano et al., 2019). However, we found that the simulated interevent ground-motion variability (randomness in the source process) of peak ground velocity, σ (PGV) is higher than the constant σ (PGV) predicted by conventional GMMs. Our simulations using several rupture scenarios demonstrate that the near-fault ground-motion amplification pattern is directly related to the slip distribution pattern.

3D Ground Motions Simulations↗
DOE OSTI2024

Modeling Flow and Particle Deposition in a Spent Nuclear Fuel Assembly

CFD (Computational Fluid Dynamic) simulation of aerosol-laden natural convective flow and particle deposition in a spent fuel storage canister with 37 assemblies is currently computationally prohibitive. PWR (Pressurized Water Reactor) assemblies have up to 289 pins or tubes with several spacer grids to align the pins. Spacer grids with mixing vanes induce swirling during operation to increase heat transfer. Each spacer grid contains hundreds of small structures such as retaining clips, channel walls, and openings. The largest canisters store 37 PWR assemblies thus, there are numerous pins, tubes, and spacer grids for which the flow region between and around these structures needs to be determined along with the movement and deposition of aerosol particles. Because of the complicated geometry, modeling the intricate flow even for just one assembly is currently impractical. Nonetheless, we are developing techniques for a practical model to assess the natural aerosol particle deposition process in a canister in the event that a release occurs from one or more fuel pins. In the previous work it was demonstrated that CFD can model the flow through a PWR spacer grid with mixing vanes, including particle deposition, in a reasonable amount of time on a personal computer. In this work, the analysis is extended to include the bypass region between an assembly and the canister basket walls. It is shown that the flow velocity in the bypass region is about three times that of the interstitial region between the pins. The lengths before and after the spacer grid are also extended to determine when the flow becomes fully developed. In addition, the approach of computationally “stitching together” segments of an assembly is demonstrated with the plan to ultimately model a full assembly. The fraction of particles that are deposited in a segment with a spacer grid is determined as a function of particle size and flow velocity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

A system identification approach for non-intrusive reduced order modeling of radiation-induced photocurrents

In this study, development of compact photocurrent models is currently dominated by analytical techniques that rely on physical assumptions to render the governing equations solvable in a closed form. Violation of these assumptions can reduce the accuracy of the models and/or limit their scope. In this paper we show that system identification of nonlinear state-space systems can serve as an alternative numerical basis for non-intrusive reduced order modeling of photocurrent effects. To that end we develop a compact gray box photocurrent model (GBPM) by using a state-space representation with a low-dimensional latent state equation that mimics a mathematical model for the response of an idealized class of devices to ionizing radiation. In so doing we obtain a model that learns the dynamics of a quantity of interest directly from its measurements without requiring snapshots of the internal device state or its discretized model, and can be inferred from very small data sets. To demonstrate the approach we train the GBPM using a small experimental data set for a Z5236 Zener diode and a small synthetic data set obtained by simulating a synthetic pn-junction device. We then compare the GBPMs with black box models trained on the same data and show that performance of the latter is limited by the size of the data set, while the former are able to achieve excellent performance in both the reproductive and the predictive regimes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Three-Dimensional CFD Investigation of Pre-Spark Heat Release in a Boosted SI Engine

Low-temperature heat release (LTHR) in spark-ignited internal combustion engines is a critical step toward the occurrence of auto-ignition, which can lead to an undesirable phenomenon known as engine knock. As such, correct predictions of LTHR are of utmost importance to improve the understanding of knock and enable techniques aimed at controlling it. While LTHR is typically obscured by the deflagration following the spark ignition, extremely late ignition timings can lead to LTHR occurrence prior to the spark, i.e., pre-spark heat release (PSHR). In this research, PSHR in a boosted direct-injection SI engine was numerically investigated using three-dimensional computational fluid dynamics (CFD). A hybrid approach was used, based on the G-equation model for representing the turbulent flame front and the multi-zone well-stirred reactor model for tracking the chemical reactions within the unburnt region. A recently developed best practice was also employed which keeps the well-stirred reactor model active throughout the entire simulation. This allowed for correct predictions of the previous cycle trapped residuals which have a considerable effect on the onset of LTHR. Multi-cycle simulations were conducted using Co-Optima alkylate and E30 fuels. The predicted in-cylinder pressure and heat release rate agreed well with the experimental data and served as validation for the CFD model. Following the initial validation, the dynamics of PSHR was discussed and a series of parameters of interest were assessed. First, the effect of exhaust valve temperature was investigated, qualitatively highlighting the importance of boundary conditions uncertainty. Further analyses were carried out on the effects of fuel properties, including laminar flame speed (LFS) and heat of vaporization (HOV). The results indicate that PSHR phasing is slightly advanced with lower LFS as more trapped unburnt fuel is made available for the next cycle. A similar trend was observed with lower HOV as less intense spray cooling led to higher mixture temperatures, i.e., higher mixture reactivity. Finally, a comparison of Co-Optima alkylate and E30 fuels was made using the pressure-temperature trajectory framework. It was shown that the differences between Co-Optima alkylate and E30 in PSHR tendency are correlated with both HOV and chemical effects.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

A solution framework for linear PDE-constrained mixed-integer problems

Abstract We present a general numerical solution method for control problems with state variables defined by a linear PDE over a finite set of binary or continuous control variables. We show empirically that a naive approach that applies a numerical discretization scheme to the PDEs to derive constraints for a mixed-integer linear program (MILP) leads to systems that are too large to be solved with state-of-the-art solvers for MILPs, especially if we desire an accurate approximation of the state variables. Our framework comprises two techniques to mitigate the rise of computation times with increasing discretization level: First, the linear system is solved for a basis of the control space in a preprocessing step. Second, certain constraints are just imposed on demand via the IBM ILOG CPLEX feature of a lazy constraint callback. These techniques are compared with an approach where the relations obtained by the discretization of the continuous constraints are directly included in the MILP. We demonstrate our approach on two examples: modeling of the spread of wildfire and the mitigation of water contamination. In both examples the computational results demonstrate that the solution time is significantly reduced by our methods. In particular, the dependence of the computation time on the size of the spatial discretization of the PDE is significantly reduced.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A new approach to the evaluation and solution of the relativistic kinetic dispersion relation and verification with continuum kinetic simulation

Here, the present work describes a new approach to evaluation and root finding for the kinetic dispersion relation of Langmuir waves, which is central to the analytical understanding of collisionless damping in plasmas. The plasma dispersion function is solved to machine precision using direct integration in the complex plane in combination with an analytic evaluation of the residue to account for the deformation along the Landau contour. To efficiently attain machine precision, the contour is displaced in the complex plane prior to integration, and numerical subtleties related to the placement of the contour are discussed. The approach is generic in that it applies to arbitrary distribution functions, with the present manuscript focused on relativistic cases. Detailed verification of results via direct kinetic simulation in a variety of configuration space dimensions is also presented. Finally, the technique is applied to the challenging case of highly relativistic (i.e. extremely hot) plasmas. Here we show both qualitative agreement with prior work, as well as the disappearance of the Landau root which would have significant implication for real-life observation or experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

How are Heterogeneous Nucleation Rate Observations Influenced by Instrument Resolution?

Experimental measurements of the heterogeneous nucleation rate rely on counting the number of nuclei with time. However, the size of a thermodynamically stable nucleus is often a few nanometers in diameter and is below the resolution of most (in situ) measurement techniques that provide a statistically valid sample. Due to the finite resolution of the instruments and analysis methods, it is challenging to capture the incipient nuclei and the subsequent evolution of nuclei density over time. In this work, we demonstrate the impact of instrument resolution on observed nuclei densities by comparing numerical modeling with experimental results. Further, to achieve this, we implemented heterogeneous nucleation within the pore-scale reactive transport modeling framework using classical nucleation theory (CNT). We compared the modeling results with nucleation rates measured using X-ray nanotomography (XnT) and evaluated how these impact the apparent values of the prefactor and interfacial energy based on CNT and the crystal growth rate. Specifically, we applied a resolution threshold (artificial resolution limit) in the model during nuclei counting to resemble an experimental resolution, ranging from 15 to 500 nm. The findings reveal that the instrument resolution significantly impacts the apparent prefactor and interfacial energy. Both apparent prefactor and interfacial energy decrease with a decrease in the instrument resolution. While deviation in the prefactor due to resolution is anticipated, those in the interfacial energy are unexpected. The approach described here allows one to correct apparent nucleation rates that depend on the instrument’s resolution to derive “intrinsic” CNT parameters for the prefactor and interfacial energy.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Tunneling electroresistance effects in epitaxial complex oxides on silicon

Complex oxide-based ferroelectric tunnel junctions (FTJs) show excellent nonvolatile memory characteristics promising for emerging technology. However, integration of these epitaxially grown FTJs electrically with a silicon substrate remains challenging due to their incompatible lattice structures and poor electronic interfaces resulting from the direct synthesis techniques. Here, we present an epitaxial SrRuO 3 /PbZr 0.2 Ti 0.8 O 3 /SrRuO 3 FTJ integrated electrically with a doped silicon substrate after a layer transfer process. The tunnel currents of the FTJ on silicon show a large tunneling electroresistance (~1×10 5 %) effect, which is explained by a numerical FTJ model incorporating pinned dipoles at the interfaces. This proof of concept of the integration of functional oxide heterostructures with silicon opens a pathway to beyond-CMOS computing devices using unconventional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exact wave solver for nonparaxial laser beam propagation

Simulations of inertial confinement fusion (ICF) experiments require high-fidelity models for laser beam propagation in a nonuniform plasma with varying index of refraction. We describe a new numerical wave solver that is applicable to centimeter-scale length plasmas encountered in indirect drive ICF applications. The one-way Helmholtz equation (OHE) generalizes the time-harmonic paraxial wave equation to large angles. Here, we present a methodology to numerically evaluate the exact solution to the OHE. This solution is computed by analytically advancing eigenfunctions of the one-way Helmholtz operator along a propagation direction and is applicable to any given index of a refraction profile. We compare our exact method with a commonly used approximate split-step technique for solving the OHE. As a test problem, we consider nonparaxial propagation of Gaussian and speckled beams in a plasma density channel with internal reflection. We find that the split-step approach incurs significant errors compared to the exact solution computed using the novel algorithm.

Belyaev, Mikhail A. (ORCID:0000000224908887)↗
DOE OSTI2024

On the Stability of Power Transmission Systems Under Persistent Inverter Attacks: A Bi-Linear Matrix Approach

We investigate the stability and robustness properties of a power transmission system under persistent deceiving attacks on inverter-interfaced energy resources. The attacks can corrupt the damping coefficients in the inverters' controllers and measurements of the frequency at the points of coupling. Leveraging tools from hybrid dynamical systems theory, we characterize a broad family of persistent (and not necessarily periodic) attacks acting on the inverters, under which the stability properties of the transmission system can be shown to not be compromised. To address potentially conservative conditions identified through conventional bounding techniques, sufficient conditions on the average activation time of the attacks are identified via Lyapunov theory, as well as the formulation and solution of a class of bilinear matrix inequalities (BMI). The results are obtained for constant and slowly time-varying loads via input-to-state stability (ISS) tools. Numerical simulations on the IEEE 39-bus test system are also presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Higher-Order Corrections to Optimisers based on Newton's Method

The Newton, Gauss–Newton and Levenberg–Marquardt methods all use the first derivative of a vector function (the Jacobian) to minimise its sum of squares. When the Jacobian matrix is ill-conditioned, the function varies much faster in some directions than others and the space of possible improvement in sum of squares becomes a long narrow ellipsoid in the linear model. This means that even a small amount of nonlinearity in the problem parameters can cause a proposed point far down the long axis of the ellipsoid to fall outside of the actual curved valley of improved values, even though it is quite nearby. This paper presents a differential equation that ‘follows’ these valleys, based on the technique of geodesic acceleration, which itself provides a 2 nd order improvement to the Levenberg–Marquardt iteration step. Higher derivatives of this equation are computed that allow n th order improvements to the optimisation methods to be derived. These higher-order accelerated methods up to 4 th order are tested numerically and shown to provide substantial reduction of both number of steps and computation time.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Supporting Greater Interactivity in the IPython Visualization Ecosystem

Interactive visualizations are invaluable tools for building intuition and supporting rapid exploration of datasets and models. Numerous libraries in Python support interactivity, and workflows that combine Jupyter and IPyWidgets in particular make it straightforward to build data analysis tools on the fly. However, the field is missing the ability to arbitrarily overlay widgets and plots on top of others to support more flexible details-on-demand techniques. This work discusses some limitations of the base IPyWidgets library, explains the benefits of IPyVuetify and how it addresses these limitations, and finally presents a new open-source solution that builds on IPyVuetify to provide easily integrated widget overlays in Jupyter.

Martindale, Nathan↗
DOE OSTI2020

Integrating Light Curve and Atmospheric Modeling of Transiting Exoplanets

Spectral retrieval techniques are currently our best tool to interpret the observed exoplanet atmospheric data. Said techniques retrieve the optimal atmospheric components and parameters by identifying the best fit to an observed transmission/emission spectrum. Over the past decade, our understanding of remote worlds in our galaxy has flourished thanks to the use of increasingly sophisticated spectral retrieval techniques and the collective effort of the community working on exoplanet atmospheric models. A new generation of instruments in space and from the ground is expected to deliver higher quality data in the next decade; it is therefore paramount to upgrade current models and improve their reliability, their completeness, and the numerical speed with which they can be run. In this paper, we address the issue of reliability of the results provided by retrieval models in the presence of systematics of unknown origin. More specifically, we demonstrate that if we fit directly individual light curves at different wavelengths (L-retrieval), instead of fitting transit or eclipse depths, as it is currently done (S-retrieval), the said methodology is more sensitive against astrophysical and instrumental noise. This new approach is tested, in particular, when discrepant simulated observations from Hubble Space Telescope/Wide Field Camera 3 and Spitzer/IRAC are combined. We find that while S-retrievals converge to an incorrect solution without any warning, L-retrievals are able to flag potential discrepancies between the data sets.

79 ASTRONOMY AND ASTROPHYSICS↗