Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Numerical simulation of F-18 fuselage forebody flows at high angles of attack

Fine-grid Navier-Stokes solutions were obtained for flow over the fuselage forebody and wing leading edge extension of the F/A-18 High Alpha Research Vehicle at large incidence. The resulting flows are complex, and exhibit cross flow separation from the sides of the forebody and from the leading edge extension. A well-defined vortex pattern is observed in the leeward-side flow. Results obtained for laminar flow show good agreement with flow visualizations obtained in ground-based experiments. Further, turbulent flows computed at high Reynolds-number flight-test conditions show good agreement with surface and off-surface visualizations obtained in flight.

Schiff, Lewis B.↗

Numerical simulation of ice growth on a MS-317 swept wing geometry

An effort to develop a 3-D ice accretion modeling method was initiated. This first step towards creation of a complete aircraft icing simulation code builds on previously developed methods for calculating 3-D flow fields and particle trajectories combined with a 2-D ice accretion calculation along coordinate locations corresponding to streamlines. The types of calculations necessary to predict 3-D ice accretion is demonstrated. Results of calculations using 3-D method for a MS-317 swept wing geometry are projected onto a 2-D plane parallel to the free stream direction and compared to experimental results for the same geometry. It is anticipated that many modifications will be made to this approach, however this effort will lay the groundwork for future modeling efforts. Results indicate that rime ice shapes indicate a difficulty in accurately calculating the ice shape in the runback region.

Potapczuk, M. G.↗

Comparison of SSM/I measurements to numerically-simulated cloud and precipitation during ERICA

These investigations focused essentially on the macroscale organization of cloud and precipitation which occurred during the 4th Intensive Observing Period (IOP-4) of the Experiment for Rapidly Intensifying Cyclones over the Atlantic (ERICA). This experiment, held off the East Coast of the United States and Canada during the winter of 1989, documented several episodes of rapid cyclonic storm development. Also playing a major role as validation and ground truth in these studies are Special Sensor Microwave Imager (SSM/I) retrievals of precipitable water, total liquid water and ice, generated by other Marshall Space Flight Center (MSFC) supported investigations. Model simulations produced to date suggest that, while the large-scale atmospheric dynamics was an essential driving mechanism, the role of condensation was crucial in facilitating the exceptionally rapid spinup of the cyclone and the low surface pressure. A model simulation of the precipitation rate at the time of most rapid storm intensification is shown in the accompanying figure. Heavier precipitation rates in the crescent shaped region are associated with deep convection along the leading edge of a dry intrusion behind the surface low. The majority of precipitation in the stratiform region to the northeast involved the production of ice with deposition from vapor to ice being the dominant process of growth. Some small amount of mixed phase cloudiness was present. Model condensate distributions matched well with SSM/I observations. The accompanying SSM/I imagery which delineates areas of large (greater than several hundred micron effective radius) precipitating ice over the ocean suggests that the model has done well in capturing the essential mechanisms responsible for the horizontal distribution of precipitation.

Robertson, Franklin R.↗

Filtering analysis of a direct numerical simulation of the turbulent Rayleigh-Benard problem

A filtering analysis of a turbulent flow was developed which provides details of the path of the kinetic energy of the flow from its creation via thermal production to its dissipation. A low-pass spatial filter is used to split the velocity and the temperature field into a filtered component (composed mainly of scales larger than a specific size, nominally the filter width) and a fluctuation component (scales smaller than a specific size). Variables derived from these fields can fall into one of the above two ranges or be composed of a mixture of scales dominated by scales near the specific size. The filter is used to split the kinetic energy equation into three equations corresponding to the three scale ranges described above. The data from a direct simulation of the Rayleigh-Benard problem for conditions where the flow is turbulent are used to calculate the individual terms in the three kinetic energy equations. This is done for a range of filter widths. These results are used to study the spatial location and the scale range of the thermal energy production, the cascading of kinetic energy, the diffusion of kinetic energy, and the energy dissipation. These results are used to evaluate two subgrid models typically used in large-eddy simulations of turbulence. Subgrid models attempt to model the energy below the filter width that is removed by a low-pass filter.

Eidson, T. M.↗

Numerical simulation of transverse fuel injection

A review of recent work at NASA Langley Research Center to compare the predictions of transverse fuel injector flow fields and mixing performance with experimental results is presented. Various cold (non-reactive) mixing studies were selected for code calibration which include the effects of boundary layer thickness and injection angle for sonic hydrogen injection into supersonic air. Angled injection of helium is also included. This study was performed using both the three-dimensional elliptic and the parabolized Navier-Stokes (PNS) versions of SPARK. Axial solution planes were passed from PNS to elliptic and elliptic to PNS in order to efficiently generate solutions. The PNS version is used both upstream and far downstream of the injector where the flow can be considered parabolic in nature. The comparisons are used to identify experimental deficiencies and computational procedures to improve agreement.

Mao, Marlon↗

Numerical simulations of the seasonal/latitudinal variations of atomic oxygen and nitric oxide in the lower thermosphere and mesosphere

A 2-Dimensional zonally-averaged thermospheric model and the global University College London (UCL) thermospheric model have been used to investigate the seasonal, solar activity and geomagnetic variation of atomic oxygen and nitric oxide. The 2-dimensional model includes detailed oxygen and nitrogen chemistry, with appropriate completion of the energy equation, by adding the thermal infrared cooling by O and NO. This solution includes solar and auroral production of odd nitrogen compounds and metastable species. This model has been used for three investigations; firstly, to study the interactions between atmospheric dynamics and minor species transport and density; secondly, to examine the seasonal variations of atomic oxygen and nitric oxide within the upper mesosphere and thermosphere and their response to solar and geomagnetic activity variations; thirdly, to study the factor of 7 to 8 peak nitric oxide density increase as solar F sub 10.7 cm flux increases from 70 to 240 reported from the Solar Mesospheric Explorer. Auroral production of NO is shown to be the dominant source at high latitudes, generating peak NO densities a factor of 10 greater than typical number densities at low latitudes. At low latitudes, the predicted variation of the peak NO density, near 110 km, with the solar F sub 10.7 cm flux is rather smaller than is observed. This is most likely due to an overestimate of the soft X-ray flux at low solar activity, for times of extremely low support number, as occurred in June 1986. As observed on pressure levels, the variation of O density is small. The global circulation during solstice and periods of elevated geomagnetic activity causes depletion of O in regions of upwelling, and enhancements in regions of downwelling.

Rees, D.↗

Numerical simulation of particle-wave interaction in boundary layers

The effects of wall injection and particle motion on the spatial stability of two-dimensional plane channel flow are investigated. For this purpose, an accurate Navier-Stokes solver to simulate the space-time evolution of disturbances in three-dimensional flows has been developed. The code is operational on the NASA Langley CRAY2 and can be ported to any other supercomputer. The code has been tested extensively in tracking the spatial evolution of two-dimensional disturbances in plane channel flow and provided excellent agreement with the linear theory including at the inflow/outflow boundaries. Preliminary calculations have been performed to investigate the effects of stationary and moving sources of vortical disturbances simulating a particle traveling in the flow field. Results suggest that even at very low amplitudes, vortical disturbances act as amplifiers on the Tollmien-Schlichting waves promoting rapid instability. It is also found that slow moving particles are more dangerous than both stationary and fast moving particles for the same disturbance levels.

Biringen, S.↗

Numerical simulation of self-field MPD thrusters

A fully two dimensional magnetohydrodynamics code was developed to predict self-field, steady-state MPD thruster performance. The governing equations are outlined, and methods of solution are presented. Model predictions are compared with experimental data for two thruster geometries over a range of discharge currents and mass flow rates. Model limitations are evaluated, and issues concerning quasi-steady versus steady-state thruster comparisons are discussed.

Lapointe, Michael R.↗

Numerical simulation of powered-lift flows

This article presents work performed at NASA Ames involving the application of computational fluid dynamics (CFD) to the prediction of flows encountered by powered-lift aircraft operating in ground effect. These flows are characterized by jet and jet-induced flows interacting with the ground and aerodynamic surfaces. Over the last five years, work has progressed from simulating the interaction of a single jet impacting on a ground plane, through the simulation of a delta planform with multiple jets in ground effect, to an ongoing effort to simulate the complete flow about a Harrier AV-8B in ground effect. Efforts have also been made to predict the thermal interaction between hot propulsive jets and a landing surface of arbitrary thermal properties. Progress to data in each of these areas is outlined.

Van Dalsem, William R.↗

Numerical simulation of flow past a tapered cylinder

The unsteady three-dimensional low Reynolds number flow past a tapered cylinder is computed. The spanwise variation in natural shedding frequency results in interesting three-dimensional flow phenomena. The computed hot-wire and spectral data are very similar to experimental results. The computation was done on the Connection Machine, a massively parallel computer; highlights of the capabilities of the Connection Machine for computation and visualization of three-dimensional unsteady flow fields are shown.

Jespersen, Dennis C.↗

Diagnostic analysis of observed and numerically simulated cloud and precipitation structures during pre-ERICA

A preliminary 140-km simulation of a rapid cyclogenesis, using the Limited Area Mesoscale Prediction System (LAMPS) is discussed. A three-dimensional version of LAMPS used in the simulation is described, along with a trajectory model utilizing the three-hourly output history files from the LAMPS model. Preliminary integrations of the LAMPS code as well as passive microwave digital data from SSM/I aboard the DMSP satellite are used for exploring the evolving baroclinic structure and moisture field of the cyclone event. A trajectory analysis of the model histories reveals a significant role for preconditioning of the low-level upstream air, which is then drawn into the ascending warm conveyor belt ahead of the storm.

Perkey, Donald J.↗

Numerical simulation of ice growth on a MS-317 swept wing geometry

An effort to develop a 3-D ice accretion modeling method was initiated. This first step towards creation of a complete aircraft icing simulation code builds on previously developed methods for calculating 3-D flow fields and particle trajectories combined with a 2-D ice accretion calculation along coordinate locations corresponding to streamlines. The types of calculations necessary to predict three-dimensional ice accretion is demonstrated. Results of calculations using 3-D method for a MS-317 swept wing geometry are projected onto a 2-D plane parallel to the free stream direction and compared to experimental results for the same geometry. It is anticipated that many modifications will be made to this approach, however, this effort will lay the groundwork for future modeling efforts. Results indicate that rime ice shapes indicate a difficulty in accurately calculating the ice shape in the runback region.

Potapczuk, M. G.↗

Numerical simulations of high-speed solar wind streams within 1 AU and their signatures at 1 AU

A parametric study of the evolution within, and signatures at, 1 AU of high-speed streams is performed with the use of a MHD two-and-a-half-dimensional time-dependent model. This study is an extension of an earlier one by Smith and Dryer (1990) who examined the ecliptic plane consequences of relatively short-duration, energetic solar disturbances. The present study examines both the erupting and corotating parts of long-duration, high-speed streams characteristic of coronal hole flows. By examining the variation of the simulated plasma velocity, density, temperature, and magnetic field at 1 AU, as well as the location of the solar coronal hole sources relative to the observer at 1 AU, it was possible to provide some insight into the identification of the solar sources of interplanetary disturbances. Two definitions for angle locating the solar source of interplanetary disturbances at 1 AU are presented and discussed. The results are applied to the suggestion by Hewish (1988) that low-latitude coronal holes are suitably positioned to be the sources of major geomagnetic storms when the holes are in the eastern half of the solar hemisphere at the time of the commencement of the storm. The results indicate that, for these cases, the streams emanating from within the hole must be very fast, greater than 1000 km/s, or very wide, greater than 60 deg, at the inner boundary of 18 solar radii.

Smith, Z.↗

Numerical simulation of instability and transition physics

The study deals with the algorithm technology used in instability and transition simulations. Discretization methods are outlined, and attention is focused on high-order finite-difference methods and high-order centered-difference formulas. One advantage of finite-difference methods over spectral methods is thought to be in implementation of nonrigorous boundary conditions. It is suggested that the next significant advances in the understanding of transition physics and the ability to predict transition will come with more physically-realistic simulations. Compressible-flow algorithms are discussed, and it is noted that with further development, exploration of bypass mechanism on simple bodies at high speed would be possible.

Streett, C. L.↗

On the numerical simulation of spatial disturbances in blunt-nose flat plate flow

The feasibility of the simulation of the evolution of spatially amplified disturbances in realistic airfoil flows using a standard Navier-Stokes airfoil code is considered for a blunt-nose flat plate flow. A basic stationary flow and its linear-stability-theory characteristics are analyzed. A computational C-grid is generated using an algebraic grid-generation technique. It is concluded that further improvements to the computational grid and to the code are necessary to make the proposed simulations economical.

Laurien, Eckart↗

Numerical simulation of Shuttle ascent transonic flow using an unstructured-grid approach

An unstructured-grid, finite-volume method has been developed for simulating the inviscid flow over spacecrafts of realistic configuration. The grid generation is accomplished by a new technique on the basis of the advancing-front concept. This simple technique is shown to be equally as powerful for a complex multibody as for a single vehicle. Second- or third-order accuracy is obtained via an innovative interpolation procedure similar to the conventional MUSCL approach. This method has been applied to the Shuttle orbiter and a representative Shuttle launch vehicle consisting of the orbiter, the external tank, and the solid rocket boosters. A comparison is discussed between the present results and other results obtained from structured- and unstructured-grid methods.

Wey, T. C.↗