Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

A new mathematical approach to finding global solutions of the magnetic structure determination problem

Abstract Determination of magnetic structure is an important analytical procedure utilized in various fields ranging from fundamental condensed-matter physics and chemistry to advanced manufacturing. It is typically performed using a neutron diffraction technique; however, finding global solutions of the magnetic structure optimization problem represents a significant challenge. Generally, it is not possible to mathematically prove that the obtained magnetic structure is a truly global solution and that no solution exists when no acceptable structure is found. In this study, the global optimization technique called semidefinite relaxation of quadratic optimization, which has attracted much interest in the field of applied mathematics, is proposed to use as a new analytical method for the determination of magnetic structure, followed by the application of polarized neutron diffraction data. This mathematical approach allows avoiding spurious local solutions, decreasing the amount of time required to find a tentative solution and finding multiple solutions when they exist.

97 MATHEMATICS AND COMPUTING↗

Lithium-Ion Mobility in Layered Oxide Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 Containing Lithium on both Intra and Inter‐Stack Positions

With the aid of neutron diffraction and electrochemical impedance spectroscopy, we have demonstrated the effect of the increase in lithium concentration and distribution on Li-ion conductivity. This has been done through the synthesis of a layered oxide Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 , with the so-called Ruddlesden-Popper type structure, where bilayer stacks of (Ta/Ti)O 6 octahedra are separated by lithium ions, located in inter-stack spaces. There are also intra-stack spaces that are occupied by a mixture of La and Li, as confirmed by neutron diffraction. The distribution of lithium over both inter- and intra-stack positions leads to the enhancement of Li-ion conductivity in Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 compared to Li 2 La(TaTi)O 7 , which has a lower concentration of lithium ions, located only in inter-stack spaces. Furthermore, the analyses of real and imaginary components of electrochemical impedance data confirm the enhanced mobility of ions in Li 2 (La 0.75 Li 0.25 )(Ta 1.5 Ti 0.5 )O 7 . While the Li-ion conductivity needs further improvement for practical applications, the success of the strategy implemented in this work offers a useful methodology for the design of layered ionic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-order harmonics and the reverse of the squaring up process in the triangular-lattice magnet HoPdAl 4 ⁢Ge 2

We uncover high-order harmonics and the reverse of the squaring-up process, in terms of analyzing the evolution of magnetic orders in a centrosymmetric layered triangular-lattice magnet HoPdAl 4 ⁢Ge 2 , based on a detailed study of the crystal structure, magnetic susceptibility, magnetization, heat capacity, and magnetic structure. Temperature dependencies of magnetic susceptibility and heat capacity show two magnetic transitions at T N = 10.5 K and T t = 5.5 K. Below T N , Ho 3+ spins order antiferromagnetically as a transverse spin-density wave with the propagation vector k 1 = (001.5 – δ) with δ ≈ 0.18. Upon further cooling through T t , the high-order harmonics with k n = (001.5 – nδ), n = 3, 5, 7 develop, suggesting a squaring-up process. It is surprising that the squaring-up process does not continue down to 0 K but reverses the trend below 3 K. Magnetic-field-induced metastable transitions were observed in M⁡(H) curves with the fields applied both parallel and perpendicular to the triangular-lattice plane. Neutron-diffraction results suggest that the magnetization process in HoPdAl 4 ⁢Ge 2 involves the conversion of k n = (001.5 – n⁢δ) with n = 1, 3, 5, 7, to a ferromagnetic k F = (000) component. It is worth noting that the already weak seventh harmonic magnetic peak is enhanced by applying a small magnetic field in the ab plane at 1.5 K or warming up to 3 K, accompanied by a slight decrease of δ.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Helical antiferromagnetic ordering in EuNi 1.95 As 2 single crystals

The Eu + 2 spins-7/2 in EuNi 2 As 2 with the body-centered tetragonal ThCr 2 Si 2 structure order antiferromagnetically below the Néel temperature T N = 15 K into a helical antiferromagnetic (AFM) structure with the helix axis aligned along the tetragonal c axis and the Eu ordered moments aligned ferromagnetically within the ab plane as previously reported from neutron diffraction measurements [T. Jin et al., Phys. Rev. B 99, 014425 (2019)]. Here we study the crystallographic, magnetic, thermal, and electronic transport properties of Bi-flux-grown single crystals using single-crystal x-ray diffraction, anisotropic magnetic susceptibility χ, isothermal magnetization M, heat capacity Cp, and electrical resistivity ρ measurements versus applied magnetic field H and temperature T. Vacancies are found on the Ni sites corresponding to the composition EuNi 1.95 (1) As 2. A good fit of the ρ (T) data by the Bloch-Grüneisen theory for metals was obtained. The χab (T) data below T N are fitted well by molecular field theory (MFT), and the helix turn angle kd and the Eu-Eu Heisenberg exchange constants are extracted from the fit parameters. The kd value is in good agreement with the neutron-diffraction result. The magnetic contribution to the zero-field heat capacity below T N is also fitted by MFT. The isothermal in-plane magnetization M ab exhibits two metamagnetic transitions versus H, whereas M c (T = 2 K ) is nearly linear up to H = 14 T, both behaviors being consistent with MFT. The M c (H, T) , ρ(H c , T) , and Cp (H c , T) data yielded a H c - T phase diagram separating the AFM and paramagnetic phases in good agreement with MFT. Anisotropic χ(T) literature data for the ThCr 2 Si 2 -type helical antiferromagnet EuRh 2 As 2 were also fitted well by MFT. A comparison is made between the crystallographic and magnetic properties of ThCr 2 Si 2 -type Eu M 2 Pn 2 compounds with M = Fe , Co, Ni, Cu, or Rh, and Pn = P or As, where only ferromagnetic and c -axis helical AFM structures are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-destructive Preirradiation Assessment of UN / U-Si “LANL1” ATF formulation

The goal of the Advanced Non-destructive Fuel Examination (ANDE) work package is the development and application of non-destructive neutron imaging and scattering techniques to ceramic and metallic nuclear fuels, ultimately also to irradiated fuels. The results of these characterizations provide complete pre- and post-irradiation on length scales ranging from mm to nm, guide destructive examination, and inform modelling efforts. Besides technique development and application to samples to be irradiated, the ANDE work package also examines possible technologies to provide these characterization techniques pool-side, e.g. at the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) using laser-driven intense pulsed neutron and gamma sources. Neutron tomography and neutron diffraction characterizations were performed on nine pellets; four UN/ U-Si composite formulations (two enrichment levels), three pure U 3 Si 5 reference formulations (two enrichment levels), and two reject pellets with visible flaws (to qualify the technique). The 235 U enrichments ranged from 0.2 to 8.8 wt. %. The nitride/silicide composites are candidate compositions for use as Accident Tolerant Fuel (ATF). The monophase U 3 Si 5 material was included as a reference. Pellets from the same fabrication batches will be inserted in the Advanced Test Reactor at Idaho during 2016. We have also proposed a data format to build a database for characterization results of individual pellets. Neutron data reported in this report were collected in the LANSCE run cycle that started in September 2015 and ended in March 2016. This report provides the results for the characterized samples and discussion in the context of ANDE and APIE. We quantified the gamma spectra of several samples in their received state as well as after neutron irradiation to ensure that the neutron irradiation does not add significant activation that would complicate shipment and handling. We demonstrated synchrotron-based 3D X-ray microscopy on the composite fuel materials, providing unparalleled level of detail on the 3D microstructure. Furthermore, we initiated development of shielding containers allowing the characterizations presented herein while allowing handling of irradiated samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Revisiting the Polyoxometalate-Based Late-Transition-Metal-Oxo Complexes: The “Oxo Wall” Stands

Terminal oxo complexes of the late transition metals Pt, Pd, and Au have been reported by us in Science and Journal of the American Chemical Society. Despite thoroughness in characterizing these complexes (multiple independent structural methods and up to 17 analytical methods in one case), we have continued to study these structures. Initial work on these systems was motivated by structural data from X-ray crystallography and neutron diffraction and 17O and 31P NMR signatures which all indicated differences from all previously published compounds. With significant new data, we now revisit these studies. New X-ray crystal structures of previously reported complexes K14[P2W19O69(OH2)] and “K10Na3[PdIV(O)(OH)WO(OH2)(PW9O34)2]” and a closer examination of these structures are provided. Also presented are the 17O NMR spectrum of an 17O-enriched sample of [PW11O39]7– and a careful combined 31P NMR-titration study of the previously reported “K7H2[Au(O)(OH2)P2W20O70(OH2)2].” These and considerable other data collectively indicate that previously assigned terminal Pt-oxo and Au-oxo complexes are in fact cocrystals of the all-tungsten structural analogues with noble metal cations, while the Pd-oxo complex is a disordered Pd(II)-substituted polyoxometalate. The neutron diffraction data have been re-analyzed, and new refinements are fully consistent with the all-tungsten formulations of the Pt-oxo and Au-oxo polyoxometalate species.

36 MATERIALS SCIENCE↗

Mechanical behavior and texture evolution of WE43 magnesium-rare earth alloy in Split-Hopkinson Pressure Bar and Taylor Impact Cylinder Testing

Mechanical behavior and texture evolution of Mg rare-earth alloy WE43 is investigated for strain-rates 10 -3 /s to upwards of 10 5 /s for the two material conditions - as-cast (AC) and T6 age hardened, rolled plate (RT6). The high strain-rate behavior is tested using both Taylor cylinder impact tests (TC) and split Hopkinson pressure bar tests (SHB) and bulk textures are obtained using neutron diffraction. Unlike the quasi-static strained material, AC and RT6 SHB retained high hardening rates throughout the test, even up to 30% true strain. Moreover, the high strain-rate data revealed that the RT6 material has a much higher strength than the AC material, but similar hardening rates despite significantly different initial texture. The flow stress near yield increased up to I 0% for RT6 and up to 30% for AC as the strain-rate increased six orders of magnitude from quasi-static rates 10 -3 /s to 10 3 /s. Neither material exhibited significant plastic anisotropy over the broad range of strain rates, despite the fact that the RT6 material had a moderately strong initial texture. In the TC tests, the geometric cross-sectional changes and texture along the cylinder from the cylindrical sample foot to head are measured and from the neutron diffraction texture analysis, upper-bound estimates of twin volume fraction are obtained as well as dislocation density from analyzing diffraction peak broadening. Recorded geometrical changes along several loading directions show that the material has deformed remarkably homogeneously under impact. Analysis of deformed textures indicates that {101¯2} extension deformation twinning occurred in the RT6 condition over the range of strain rates, with an upper bound estimate of 40% twin volume fraction for approximately 0.10-0.25 true strain. The peak texture components after the impact have their c-axes closely aligned with the impact direction. As a result, these observations are presented and rationalized in the paper.

42 ENGINEERING↗

Hydrothermal synthesis of single crystals of transition metal vanadates in the glaserite phase

A series of transition metal vanadate crystals were prepared using a high temperature (580 °C) hydrothermal method. The compounds all had the general formula A{sub 2}AEM(VO{sub 4}){sub 2} (A=K, Na, Li; AE=Ba, Sr; M=Co, Fe, Mn). They are all variations of the glaserite structural type and range in symmetry from P-3m1 to P-3 to P2{sub 1}/c. Most of the derivatives contain a planar three-fold rotation operation, making them possible spin frustration candidates. Single crystal structural analyses were performed on many of the derivatives to obtain a detailed understanding of the distortions of the tetrahedral building blocks that accommodate the symmetry distortions. A hydrothermal growth method was developed to grow high quality single crystals of sizes up to 2–3 mm/edge. This method can be generalized for large crystal growth to enable magnetic and neutron diffraction studies that require relatively large single crystals. - Highlights: • The hydrothermal synthesis of glaserite-type vanadates is demonstrated. • Synthesis from stoichiometric component reactions yields 0.2–0.5 mm size crystals. • Hydrothermal recrystallization of glaserite powder yields 2–3 mm size crystals. • The structure varies according to the alkali and alkaline earth metals selected. • Ideal (P-3m1) and distorted (P-3 and P2{sub 1}/c) glaserite structures are observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Signatures of low-dimensional magnetism and short-range spin fluctuations in Co-based trirutiles

Features of low dimensional magnetism resulting from a square-net arrangement of Co atoms in trirutile CoTa2O6 is studied in the present work by means of density functional theory and is compared with the experimental results of specific heat and neutron diffraction. The small total energy differences between the ferromagnetic (FM) and antiferromagnetic (AFM) configuration of CoTa2O6 shows that competing magnetic ground states exist, with the possibility of transition from FM to AFM phase at low temperature. Our calculation further suggests the semi-conducting behavior for CoTa2O6 with a band gap of ~0.41 eV. The calculated magnetic anisotropy energy is ~2.5 meV with its easy axis along the [100] (in-plane) direction. Studying the evolution of magnetism in Co1-xMgxTa2O6 (x = 0, 0.1, 0.3, 0.5, 0.7 and 1). it is found that the sharp AFM transition exhibited by CoTa2O6 at TN = 6.2 K in it’s heat capacity vanishes with Mg-dilution, indicating the obvious effect of weakening the superexchange pathways of Co. The current specific heat study reveals the robust nature of TN for CoTa2O6 in applied magnetic fields. Clear indication of short-range magnetism is obtained from the magnetic entropy, however, diffuse components are absent in neutron diffraction data. At TN , CoTa2O6 enters a long-range ordered magnetic state which can be described using a propagation vector, ( 1 1 0). Upon Mg-dilution at x =0.1, the long-range ordered magnetism is destroyed. The present results should motivate an investigation of magnetic excitations in this low-dimensional anisotropic magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Residual stresses in Cu matrix composite surface deposits after laser melt injection

Abstract Tungsten carbide particles reinforced metal matrix composite (MMC) coatings can significantly improve surface wear resistance owing to their increased surface hardness. However, the presence of macro‐ and micro‐residual stresses in MMC coatings can have detrimental effects, such as reducing service life. In this study, neutron diffraction was used to determine the residual stresses in spherical fused tungsten carbide (sFTC) reinforced Cu matrix composite surface deposits after laser melt injection. We also developed a thermo‐mechanical coupled finite element model to predict residual stresses. Our findings reveal that sFTC/Cu composite deposits produced with a preheating temperature of 400°C have low residual stresses, with a maximum tensile residual stress of 98 MPa in the Cu matrix on the top surface. In contrast, the sFTC/bronze (CuAl10Ni5Fe4) composite deposit exhibits very high residual stresses, with a maximum tensile residual stress in the Cu matrix on the top surface reaching 651 MPa. These results provide a better understanding of the magnitudes and distributions of residual stresses in sFTC‐reinforced Cu matrix composite surface deposits manufactured via laser melt injection.

Zhang, Xingxing↗

Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing

A stainless steel test artifact produced by Direct Metal Laser Sintering and similar to a proposed standardized test artifact was examined using neutron diffraction. The artifact contained a number of structures with different aspect ratios pertaining to wall thickness, height above base plate, and side length. Through spatial resolutions of the order of one millimeter the volumetric distribution of stresses in several was measured. It was found that the stresses peak in the tensile region around 500 MPa near the top surface, with balancing compressive stresses in the interior. The presence of a support structure (a one millimeter high, thin walled, hence weaker, lattice structure deposited on the base plate, followed by a fully dense AM structure) has only minor effects on the stresses.

36 MATERIALS SCIENCE↗

Low-Temperature Synthesis, Structural Characterization, and Electrochemistry of Ni-Rich Spinel-like LiNi 2– y Mn y O 4 (0.4 ≤ y ≤ 1)

The thermal conversion of chemically delithiated layered Li 0.5 Ni 1-y Mn y O 2 (0.2 ≤ y ≤ 0.5) into spinel-like LiNi 2-y Mn y O 4 (0.4 ≤ y ≤ 1) has been systematically investigated. The formed spinel-like phases are metastable and cannot be accessed by a conventional high-temperature solid-state method. The layered-to-spinel transformation mechanism has been studied by the Rietveld refinement of in situ neutron diffraction as a function of temperature (25–300 °C). In particular, the ionic diffusion of Li and M ions is quantified at different temperatures. Electrochemistry of the metastable spinel-like phases obtained has been studied in lithium-ion cells. A bond valence sum map has been performed to understand the ionic diffusion of lithium ions in the Ni-rich layered, spinel, and rock-salt structures. The study can aid the understanding of the possible phases that could be formed during the cycling of Ni-rich layered oxide cathodes.

36 MATERIALS SCIENCE↗

Spin Stripe Order in a Square Planar Trilayer Nickelate.

Trilayer nickelates, which exhibit a high degree of orbital polarization combined with an electron count (d(8.67)) corresponding to overdoped cuprates, have been identified as a promising candidate platform for achieving high-T-c superconductivity. One such material, La4Ni3O8, undergoes a semiconductor-insulator transition at similar to 105 K, which was recently shown to arise from the formation of charge stripes. However, an outstanding issue has been the origin of an anomaly in the magnetic susceptibility at the transition and whether it signifies the formation of spin stripes akin to single layer nickelates. Here we report single crystal neutron diffraction measurements (both polarized and unpolarized) that establish that the ground state is indeed magnetic. The ordering is modeled as antiferromagnetic spin stripes that are commensurate with the charge stripes, the magnetic ordering occurring in individual trilayers that are essentially uncorrelated along the crystallographic c axis. A comparison of the charge and spin stripe order parameters reveals that, in contrast to single-layer nickelates such as La2-xSrxNiO4 as well as related quasi-2D oxides including manganites, cobaltates, and cuprates, these orders uniquely appear simultaneously, thus demonstrating a stronger coupling between spin and charge than in these related low-dimensional correlated oxides.

Zhang, Junjie↗

In-situ neutron scattering study of crystallization in a Zr-based bulk metallic glass

Crystallization of a Zr-based bulk metallic glass (Zr50.4Cu40.6Al9) upon isothermal annealing has been investigated using in-situ neutron diffraction and the pair distribution function (PDF) method. By separating the crystalline peaks from the scattering of the amorphous phase, we are able to obtain the real-time structure factor and pair distribution function for the crystalline phase as well as its volume fraction. Our analysis shows that the crystallization follows the Johnson-Mehl-Avrami law with an exponent of 4.0?.3, indicating a three-dimensional nucleation and growth process distinctly different from conventional phase transformations in crystalline alloys. The analysis method established in the present study paves a new way for probing the kinetics of phase transformation for a broad range of non-crystalline materials including liquids and glasses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗