Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Geology of the small Tharsis volcanoes: Jovis Tholus, Ulysses Patera, Biblis Patera, Mars

Jovis Tholus, Ulysses Patera, and Biblis Patera, three small volcanoes in the Tharsis area of Mars, provide important insight into the evolution of volcanism on Mars. All three are interpreted to be shield volcanoes, indicating that shield volcansim was present from the outset in Tharsis. Jovis Tholus is the least complex with simple repeated outpouring of lavas and caldera-forming events. Ulysses Patera is dominated by a giant caldera within which is a line of cinder cones or domes suggesting terminal stages of volcanism in which the magma had either significant volatiles or increased viscosity. Biblis Patera is characterized by nested calderas which have expanded by block faulting of the flank; it also exhibits lava flows erupted onto the flanks from events along concentric fractures. These shields are different from the younger Tharsis Montes shields only in terms of the volume of erupted material. The limited shield volume suggests that the magma source which fed the shields was rapidly depleted. The relatively large size ofthe calderas probably results from relatively large, shallow magma bodies rather than significant burial of the flanks by younger lavas. Eruption rates consistent with typical terrestrial basaltic eruptiuon rates suggest that these volcanoes were probably built over time spans of 10(exp 4) to 10(exp 5) years. Stratigraphic ages range from Early to Upper Hesperian; absolute ages range from 1.9 to 3.4 Ga.

Plescia, J. B.↗

Multi-resolution analysis for ENO schemes

Given a function u(x) which is represented by its cell-averages in cells which are formed by some unstructured grid, we show how to decompose the function into various scales of variation. This is done by considering a set of nested grids in which the given grid is the finest, and identifying in each locality the coarsest grid in the set from which u(x) can be recovered to a prescribed accuracy. We apply this multi-resolution analysis to Essentially Non-oscillatory Schemes (ENO) schemes in order to reduce the number of numerical flux computations which is needed in order to advance the solution by one time-step. This is accomplished by decomposing the numerical solution at the beginning of each time-step into levels of resolution, and performing the computation in each locality at the appropriate coarser grid. We present an efficient algorithm for implementing this program in the one-dimensional case; this algorithm can be extended to the multi-dimensional case with cartesian grids.

Harten, Ami↗

Weightless bubble lattices: A case of froth wicking

In the absence of gravity drainage, froth wicking draws excess fluid onto a bubble lattice. Capillary forces only cause fluid transport; a moving front moves stably and without fluid fingering along a constant velocity bubble-fluid contact line. This percolation of fluid crawling up the lattice shows fluid coverage on lattice borders varies linearly with available surface area (proportional to lattice perimeter) and fluid accelerates through regions or nests of high bubble density (number of bubbles/sq cm). The development of nearly two-dimensional bubble lattices in variable gravity (step function between 0.01 and 1.8 times earthly gravity) are examined experimentally and a zeroth-order model for froth wetting is presented, which captures many of the principal observations. Possible applications for bubble lattices include adhesion casting of metals and separation of biological cells, bacteria, and particles.

Noever, David A.↗

Solar wind research with the Large Angle Spectroscopic Coronagraph (LASCO) experiment onboard the Solar and Heliospheric Observatory (SOHO) satellite

The ESA-NASA satellite, to be launched in October 1995, carries three nested coronagraphs, which will image the solar corona from 1.1 R(solar mass) to 30 R(solar mass). Super polished mirrors have been developed for the design of a mirror Lyot coronagraph which has a straylight level comparable with the coronal intensity from 1.1 R, to 30 R(solar mass) Coronal details can be imaged with a spatial resolution of 6 arc seconds. A Fabry Perot interferometer with a spectral resolution of 0.7 A at the wavelength of the green coronal emission line will allow the simultaneous construction of spectra over the entire field of view of 10(exp 6) pixels. The middle coronagraph (1.5 R(solar mass) - 6 R(solar mass)) and the outer coronagraph (3 R(solar mass) - 30 R(solar mass)) are externally occulted lens Lyot coronagraphs. Their straylight level 10(exp -11) B(solar mass) and 10(exp -12) B(solar mass) respectively is an order of magnitude smaller than the intensity of the corona. The sensitivity of LASCO to distinguish between different solar wind acceleration mechanisms will be discussed as well as its ability to discern different CME models.

Brueckner, G. E.↗

The Alignment Test System for AXAF-I's High Resolution Mirror Assembly

The AXAF-1 High Resolution Mirror Assembly (HRMA) consists of four nested mirror pairs of Wolter Type-1 grazing incidence optics. The HRMA assembly and alignment will take place in a vibration-isolated, cleanliness class 100, 18 meter high tower at an Eastman Kodak Company facility in Rochester, NY. Each mirror pair must be aligned such that its image is coma-free, and the four pairs must be aligned such that their images are coincident. In addition, both the HRMA optical axis and focal point must be precisely known with respect to physical references on the HRMA. The alignment of the HRMA mirrors is measured by the HRMA Alignment Test System (HATS), which is an integral part of the tower facility. The HATS is configured as a double-pass, autocollimating Hartmann test where each mirror aperture is scanned to determine the state of alignment. This paper will describe the design and operation of the HATS.

Waldman, Mark↗

Ion Thruster Support and Positioning System

A system for supporting and selectively positioning an ion thruster relative to a surface of a spacecraft includes three angularly spaced thruster support assemblies. Each thruster support assembly includes a frame which has a rotary actuator mounted thereon. The rotary actuator is connected to an actuator member which is rotatably connected to a thruster attachment member connected to a body of the thruster. A stabilizer member is rotatably mounted to the frame and to the thruster attachment member. The thruster is selectively movable in the pitch and yaw directions responsive to movement of the actuator members by the actuators on the thruster support assemblies. A failure of any one actuator on a thruster support assembly will generally still enable limited thruster positioning capability in two directions. In a retracted position the thruster attachment members are held in nested relation in saddles supported on the frames of the thruster support assemblies. The thruster is securely held in the retracted position during periods of high loading such as during launch of the spacecraft.

Haag, Thomas W.↗

Algebraic Multigrid by Smoothed Aggregation for Second and Fourth Order Elliptic Problems

Multigrid methods are very efficient iterative solvers for system of algebraic equations arising from finite element and finite difference discretization of elliptic boundary value problems. The main principle of multigrid methods is to complement the local exchange of information in point-wise iterative methods by a global one utilizing several related systems, called coarse levels, with a smaller number of variables. The coarse levels are often obtained as a hierarchy of discretizations with different characteristic meshsizes, but this requires that the discretization is controlled by the iterative method. To solve linear systems produced by existing finite element software, one needs to create an artificial hierarchy of coarse problems. The principal issue is then to obtain computational complexity and approximation properties similar to those for nested meshes, using only information in the matrix of the system and as little extra information as possible. Such algebraic multigrid method that uses the system matrix only was developed by Ruge. The prolongations were based on the matrix of the system by partial solution from given values at selected coarse points. The coarse grid points were selected so that each point would be interpolated to via so-called strong connections. Our approach is based on smoothed aggregation introduced recently by Vanek. First the set of nodes is decomposed into small mutually disjoint subsets. A tentative piecewise constant interpolation (in the discrete sense) is then defined on those subsets as piecewise constant for second order problems, and piecewise linear for fourth order problems. The prolongation operator is then obtained by smoothing the output of the tentative prolongation and coarse level operators are defined variationally.

Vanek, Petr↗

A Parallel Multilevel Spectral Element Scheme

A parallel multilevel strategy is developed using spectral (p) finite elements. Hierarchic bases are particularly well suited since the element matrices and vectors are nested and the multilevel projections easiliy performed. Since the basis degree is used to specify the multigrid level, an EBE strategy is natural br the multilevel technique. Results are presented for two candidate nonlinear elliptic transport problems: the augmented drift-diffusion equations of semiconductor device modeling and the stream function-vorticity equations of incompressible fluid dynamics.

Davis, M. B.↗

An Optimal Order Nonnested Mixed Multigrid Method for Generalized Stokes Problems

A multigrid algorithm is developed and analyzed for generalized Stokes problems discretized by various nonnested mixed finite elements within a unified framework. It is abstractly proved by an element-independent analysis that the multigrid algorithm converges with an optimal order if there exists a 'good' prolongation operator. A technique to construct a 'good' prolongation operator for nonnested multilevel finite element spaces is proposed. Its basic idea is to introduce a sequence of auxiliary nested multilevel finite element spaces and define a prolongation operator as a composite operator of two single grid level operators. This makes not only the construction of a prolongation operator much easier (the final explicit forms of such prolongation operators are fairly simple), but the verification of the approximate properties for prolongation operators is also simplified. Finally, as an application, the framework and technique is applied to seven typical nonnested mixed finite elements.

Deng, Qingping↗

Some Aspects of Multigrid Methods on Non-Structured Meshes

To solve a given fine mesh problem, the design of a multigrid method requires the definition of coarse levels, associated coarse grid operators and inter-grid transfer operators. For non-structured simplified meshes, these definitions can rely on the use of non-nested triangulations. These definitions can also be founded on agglomeration/aggregation techniques in a purely algebraic manner. This paper analyzes these two options, shows the connections of the volume-agglomeration method with algebraic methods and proposes a new definition of prolongation operator suitable for the application of the volume-agglomeration method to elliptic problems.

Guillard, H.↗

Science Instruments for the Advanced X-Ray Astrophysics Facility (AXAF)

The AXAF program has undergone major changes since the Announcement of Opportunity was extended by NASA Headquarters in 1983. The Science Instruments (SI's) for AXAF have also experienced several design changes since they were competitively selected in 1985. Moreover, two separate complementary missions are now being baselined for AXAF; one is designated AXAF-I for imaging and will include the high precision Wolter type I optics, and the other is called AXAF-S for spectroscopy. The resulting less-costly AXAF will still be superior to any previous x-ray observatories. Both missions continue to be managed. AXAF-I contains two focal plane SI's, the High Resolution Camera (HRC), and the AXAF Charge-Coupled Device (CCD) imaging spectrometer (ACIS), as well as the High-Energy Transmission Grating Spectrometer (HETGS) and the Low-Energy Transmission Grating Spectrometer (LETGS). Optics/Cryogenics Division (BECD). AXAF-S features only one focal plane SI, the X-Ray Spectrometer (XRS). The grazing incidence mirrors for this mission are mainly to provide a large collecting area and to concentrate these x-ray photons onto the XRS detector. Precise focusing, although preferred, is of secondary importance. Nested conical foil mirrors are currently baselined; however, replicated imaging optics are being evaluated for collecting efficiency and cost. AXAF-S is scheduled to be launched in late 1999. It has been designated as an MSFC in-house project. In addition to overall management, MSFC is fully responsible for the design, development, integration, and test of the complete AXAF-S observatory, including the XRS which will be furnished by the Goddard Space Flight Center (GSFC). Together, AXAF-I and AXAF-S constitute the third of NASA's series of Great Observatories, joining the Hubble space telescope (HST) and the Gamma-Ray Observatory (GRO) which are already operational. The develop- ment, launch, and operation of the Space InfraRed Telescope Facility (SIRTF) will follow later to complete the Great Observatory series. This paper summarizes the impact these changes have had on the SI's.

Carl E Winkler↗

Modeling of Rolling Element Bearing Mechanics: Computer Program Updates

The Rolling Element Bearing Analysis System (REBANS) extends the capability available with traditional quasi-static bearing analysis programs by including the effects of bearing race and support flexibility. This tool was developed under contract for NASA-MSFC. The initial version delivered at the close of the contract contained several errors and exhibited numerous convergence difficulties. The program has been modified in-house at MSFC to correct the errors and greatly improve the convergence. The modifications consist of significant changes in the problem formulation and nonlinear convergence procedures. The original approach utilized sequential convergence for nested loops to achieve final convergence. This approach proved to be seriously deficient in robustness. Convergence was more the exception than the rule. The approach was changed to iterate all variables simultaneously. This approach has the advantage of using knowledge of the effect of each variable on each other variable (via the system Jacobian) when determining the incremental changes. This method has proved to be quite robust in its convergence. This technical memorandum documents the changes required for the original Theoretical Manual and User's Manual due to the new approach.

Ryan, S. G.↗

GRASP/Ada 95: Reverse Engineering Tools for Ada

The GRASP/Ada project (Graphical Representations of Algorithms, Structures, and Processes for Ada) has successfully created and prototyped an algorithmic level graphical representation for Ada software, the Control Structure Diagram (CSD), and a new visualization for a fine-grained complexity metric called the Complexity Profile Graph (CPG). By synchronizing the CSD and the CPG, the CSD view of control structure, nesting, and source code is directly linked to the corresponding visualization of statement level complexity in the CPG. GRASP has been integrated with GNAT, the GNU Ada 95 Translator to provide a comprehensive graphical user interface and development environment for Ada 95. The user may view, edit, print, and compile source code as a CSD with no discernible addition to storage or computational overhead. The primary impetus for creation of the CSD was to improve the comprehension efficiency of Ada software and, as a result, improve reliability and reduce costs. The emphasis has been on the automatic generation of the CSD from Ada 95 source code to support reverse engineering and maintenance. The CSD has the potential to replace traditional prettyprinted Ada source code. The current update has focused on the design and implementation of a new Motif compliant user interface, and a new CSD generator consisting of a tagger and renderer. The Complexity Profile Graph (CPG) is based on a set of functions that describes the context, content, and the scaling for complexity on a statement by statement basis. When combined graphicafly, the result is a composite profile of complexity for the program unit. Ongoing research includes the development and refinement of the associated functions, and the development of the CPG generator prototype. The current Version 5.0 prototype provides the capability for the user to generate CSDs and CPGs from Ada 95 source code in a reverse engineering as well as forward engineering mode with a level of flexibility suitable for practical application. This report provides an overview of the GRASP/Ada project with an emphasis on the current update.

Cross, James H., II↗

Opus: A Coordination Language for Multidisciplinary Applications

Data parallel languages, such as High Performance fortran, can be successfully applied to a wide range of numerical applications. However, many advanced scientific and engineering applications are multidisciplinary and heterogeneous in nature, and thus do not fit well into the data parallel paradigm. In this paper we present Opus, a language designed to fill this gap. The central concept of Opus is a mechanism called ShareD Abstractions (SDA). An SDA can be used as a computation server, i.e., a locus of computational activity, or as a data repository for sharing data between asynchronous tasks. SDAs can be internally data parallel, providing support for the integration of data and task parallelism as well as nested task parallelism. They can thus be used to express multidisciplinary applications in a natural and efficient way. In this paper we describe the features of the language through a series of examples and give an overview of the runtime support required to implement these concepts in parallel and distributed environments.

Chapman, Barbara↗

Multilevel methods for elliptic problems on unstructured grids

Multilevel methods on unstructured grids for elliptic problems are reviewed. The advantages of these techniques are the flexible approximation of the boundaries of complicated physical domains and the ability to adapt the grid to the resolution of fine scaled structures. Multilevel methods, which include multigrid methods and domain decomposition methods, depend on the correct splitting of appropriate finite element spaces. The standard splittings used in the structured grid case cannot be directly extended to unstructured grids due to their requirement for a hierarchical grid structure. Issues related to the application of multilevel methods to unstructured grids are discussed, including how the coarse spaces and transfer operators are defined and how different types of boundary conditions are treated. An obvious way to generate a coarse mesh is to regrid the physical domain several times. Several alternatives are proposed and discussed: node nested coarse spaces, agglomerated coarse spaces and algebraically generated coarse spaces.

Chan, Tony F.↗

Understanding Skill in EVA Mass Handling: Theoretical and Operational Foundations - Volume 1

This report describes the theoretical and operational foundations for our analysis of skill in extravehicular mass handling. A review of our research on postural control, human-environment interactions, and exploratory behavior in skill acquisition is used to motivate our analysis. This scientific material is presented within the context of operationally valid issues concerning extravehicular mass handling. We describe the development of meaningful empirical measures that are relevant to a special class of nested control systems: manual interactions between an individual and the substantial environment. These measures are incorporated into a unique empirical protocol implemented on NASA's principal mass handling simulator, the precision air-bearing floor, in order to evaluate skill in extravehicular mass handling. We discuss the components of such skill with reference to the relationship between postural configuration and controllability of an orbital replacement unit, the relationship between orbital replacement unit control and postural stability, the relationship between antecedent and consequent movements of an orbital replacement unit, and the relationship between antecedent and consequent postural movements. Finally, we describe our expectations regarding the operational relevance of the empirical results as it pertains to extravehicular activity tools, training, monitoring, and planning.

Riccio, Gary↗

Understanding Skill in EVA Mass Handling: Empirical Investigation - Volume 2

In this report we describe the details of our empirical protocol effort investigating skill in extravehicular mass handling using NASA's principal mass handling simulator, the precision air bearing floor. Contents of this report include a description of the necessary modifications to the mass handling simulator; choice of task, and the description of an operationally relevant protocol. Our independent variables are presented in the context of the specific operational issues they were designed to simulate. The explanation of our dependent variables focuses on the specific data processing procedures used to transform data from common laboratory instruments into measures that are relevant to a special class of nested control systems (discussed in Volume 1): manual interactions between an individual and the substantial environment. The data reduction is explained in the context of the theoretical foundation described in Volume 1. Finally as a preface to the presentation of the empirical data in Volume 3 of this report series, a set of detailed hypotheses is presented.

Riccio, Gary↗

Numerical Modeling Studies of Wake Vortex Transport and Evolution Within the Planetary Boundary Layer

In support of the wake vortex effect of the Terminal Area Productivity program, we have put forward four tasks to be accomplished in our proposal. The first task is validation of two-dimensional wake vortex-turbulence interaction. The second task is investigation of three-dimensional interaction between wake vortices and atmospheric boundary layer (ABL) turbulence. The third task is ABL studies. The, fourth task is addition of a Klemp-Durran condition at the top boundary for TASS model. The accomplishment of these tasks will increase our understanding of the dynamics of wake vortex and improve forecasting systems responsible for air safety and efficiency. The first two tasks include following three parts: (a) Determine significant length scale for vortex decay and transport, especially the length scales associated with the onset of Crow instability (Crow, 1970); (b) Study the effects of atmospheric turbulence on the decay of the wake vortices; and (c) Determine the relationships between decay rate, transport properties and atmospheric parameters based on large eddy simulation (LES) results and the observational data. These parameters may include turbulence kinetic energy, dissipation rate, wind shear and atmospheric stratification. The ABL studies cover LES modeling of turbulence structure within planetary boundary layer under transition and stable stratification conditions. Evidences have shown that the turbulence in the stable boundary layer can be highly intermittent and the length scales of eddies are very small compared to those in convective case. We proposed to develop a nesting grid mesh scheme and a modified Klemp-Durran conditions (Klemp and Wilhelmson, 1978) at the top boundary for TASS model to simulate planetary boundary layer under stable stratification conditions. During the past year, our group has made great efforts to carry out the above mentioned four tasks simultaneously. The work accomplished in the last year will be described in the next section.

Lin, Yuh-Lang↗