Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modeling of Metal AM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading

A general mathematical model and solution methodologies are being developed for analyzing structural response of thin, metallic shell-type structures under large transient, cyclic, or static thermomechanical loads. Among the system responses, which were associated with these load conditions, were thermal buckling, creep buckling, and ratcheting. Thus, geometric as well as material-type nonlinearities (of high order) can be anticipated and must be considered in the development of the mathematical model. Furthermore, this must also be accommodated in the solution process.

Simitses, G. J.↗
NASA NTRS1971

Basic investigation of turbine erosion phenomena

An analytical-empirical model is presented of turbine erosion that fits and explains experience in both steam and metal vapor turbines. Because of the complexities involved in analyzing turbine problems, in a pure scientific sense, it is obvious that this goal can be only partially realized. Therefore, emphasis is placed on providing a useful model for preliminary erosion estimates for given configurations, fluids, and flow conditions.

Pouchot, W. D.↗
NASA NTRS1991

Lithium in the most extreme halo stars - Trends with metallicity

A grid of extremely metal-poor stellar evolutionary tracks (Z = 0.00001) is constructed to compare the predicted lithium abundance depletion to observations of the lithium abundance in correspondingly metal-poor stars (Fe/H = -3.3), and, combined with an earlier work to investigate trends of lithium isochrones with metal abundance. Lithium abundances in the most extreme halo stars hint at the possibility of small downward slope toward lower T(eff) in the flat Li-T(eff) relation (the Spite lithium plateau) observed in slightly less extreme stars; the models also predict this. In the cool star region of the Li-T(eff) plane, higher metallicity lithium isochromes are cooler at fixed lithium abundance, consistent with the observations. Current data thus agree well with the lithium trends from standard model.

Deliyannis, Constantine P.↗
NASA NTRS2003

Hydrostatic Stress Effects Incorporated Into the Analysis of the High-Strain-Rate Deformation of Polymer Matrix Composites

Procedures for modeling the effect of high strain rate on composite materials are needed for designing reliable composite engine cases that are lighter than the metal cases in current use. The types of polymer matrix composites that are likely to be used in such an application have a deformation response that is nonlinear and that varies with strain rate. The nonlinearity and strain rate dependence of the composite response is primarily due to the matrix constituent. Therefore, in developing material models to be used in the design of impact-resistant composite engine cases, the deformation of the polymer matrix must be correctly analyzed. However, unlike in metals, the nonlinear response of polymers depends on the hydrostatic stresses, which must be accounted for within an analytical model. An experimental program has been carried out through a university grant with the Ohio State University to obtain tensile and shear deformation data for a representative polymer for strain rates ranging from quasi-static to high rates of several hundred per second. This information has been used at the NASA Glenn Research Center to develop, characterize, and correlate a material model in which the strain rate dependence and nonlinearity (including hydrostatic stress effects) of the polymer are correctly analyzed. To obtain the material data, Glenn s researchers designed and fabricated test specimens of a representative toughened epoxy resin. Quasi-static tests at low strain rates and split Hopkinson bar tests at high strain rates were then conducted at the Ohio State University. The experimental data confirmed the strong effects of strain rate on both the tensile and shear deformation of the polymer. For the analytical model, Glenn researchers modified state variable constitutive equations previously used for the viscoplastic analysis of metals to allow for the analysis of the nonlinear, strain-rate-dependent polymer deformation. Specifically, we accounted for the effects of hydrostatic stresses. An important discovery in the course of this work was that the hydrostatic stress effects varied during the loading process, which needed to be accounted for within the constitutive equations. The model is characterized primarily by shear data, with tensile data used to characterize the hydrostatic stress effects.

Goldberg, Robert K.↗
NASA NTRS1998

WARP3D-Release 10.8: Dynamic Nonlinear Analysis of Solids using a Preconditioned Conjugate Gradient Software Architecture

This report describes theoretical background material and commands necessary to use the WARP3D finite element code. WARP3D is under continuing development as a research code for the solution of very large-scale, 3-D solid models subjected to static and dynamic loads. Specific features in the code oriented toward the investigation of ductile fracture in metals include a robust finite strain formulation, a general J-integral computation facility (with inertia, face loading), an element extinction facility to model crack growth, nonlinear material models including viscoplastic effects, and the Gurson-Tver-gaard dilatant plasticity model for void growth. The nonlinear, dynamic equilibrium equations are solved using an incremental-iterative, implicit formulation with full Newton iterations to eliminate residual nodal forces. The history integration of the nonlinear equations of motion is accomplished with Newmarks Beta method. A central feature of WARP3D involves the use of a linear-preconditioned conjugate gradient (LPCG) solver implemented in an element-by-element format to replace a conventional direct linear equation solver. This software architecture dramatically reduces both the memory requirements and CPU time for very large, nonlinear solid models since formation of the assembled (dynamic) stiffness matrix is avoided. Analyses thus exhibit the numerical stability for large time (load) steps provided by the implicit formulation coupled with the low memory requirements characteristic of an explicit code. In addition to the much lower memory requirements of the LPCG solver, the CPU time required for solution of the linear equations during each Newton iteration is generally one-half or less of the CPU time required for a traditional direct solver. All other computational aspects of the code (element stiffnesses, element strains, stress updating, element internal forces) are implemented in the element-by- element, blocked architecture. This greatly improves vectorization of the code on uni-processor hardware and enables straightforward parallel-vector processing of element blocks on multi-processor hardware.

Koppenhoefer, Kyle C.↗
NASA NTRS1993

Microwave techniques for physical property measurements

Industrial processing of metals and ceramics is now being streamlined by the development of theoretical models. High temperature thermophysical properties of these materials are required to successfully apply these theories. Unfortunately, there is insufficient experimental data available for many of these properties, particularly in the molten state. Microwave fields can be used to measure specific heat, thermal diffusivity, thermal conductivity and dielectric constants at high temperatures. We propose to (1) develop a microwave flash method (analogous to the laser flash technique) that can simultaneously measure the thermal diffusivity and specific heat of insulators and semiconductors at high temperatures, (2) an appropriate theory and experimental apparatus to demonstrate the measurement of the specific heat of a metal using a new microwave ac specific heat technique, and (3) experimental methods for noncontact measurement of the real and imaginary dielectric constants.

Barmatz, M.↗
NASA NTRS1995

Theoretical Study of Response of InGaAs Metal-Semiconductor-Metal Photodetectors

We present a theoretical investigation of the response of metal-semiconductor-metal (MSM) photodetectors made of InGaAs lattice-matched to InP using a two-dimensional drift-diffusion model with a thermionic-field emission boundary condition for the heterojunctions. The effect of including a top InAlAs layer to increase the effective barrier height of the metal fingers on the InGaAs active layer is thoroughly examined and found to limit the collection of the photocurrent signal due to the electron and hole barriers that it forms with InGaAs. Due to the thickness and height of the InAlAs barrier layer in existing designs, the tunneling current obtained from the model is found to be negligibly small to significantly affect the output signal current. In an attempt to obtain a better response, different design structures including one where a quasi-Schottky contact is utilized are studied and their speed of response, breakdown voltage, and dark current are compared to that of the usual InGaAs device.

Salem, Ali F.↗
NASA NTRS1989

Metal dynamics in Lake Vanda (Wright Valley, Antarctica)

Data are reported for Mn, Fe, Co, Ni, Cu and Cd in the Onyx River, and for Mn, Co, Ni, Cu and Cd in Lake Vanda, a closed-basin Antarctic lake. Oxic water concentrations for Co, Ni, Cu and Cd were quite low and approximate pelagic ocean values. Scavenging of these metals by sinking particles is strongly indicated. Deep-lake profiles reveal a sharp peak in the concentrations of Mn, Fe and Co at the oxic-anoxic boundary at 60 m. Maxima for Ni, Cu and Cd occur higher in the water column, in the vicinity of a Mn submaximum, suggesting early release of these metals from sinking manganese oxide-coated particles. A rough steady-state model leads to the conclusion that there is a large downward flux of Mn into the deep lake and that this flux is sufficient to explain the annual loss of Co, Ni, Cu and Cd. A pronounced geochemical separation between Fe and Mn apparently occurs in this system--Fe being best lost in near-shore environments and Mn being lost in deeper waters. Comparison of metal residence times in Lake Vanda with those in the oceans shows that in both systems Mn, Fe and Co are much more reactive than Ni, Cu and Cd. Energetically favorable inclusion of the more highly charged metals, Mn(IV), Fe(III) and Co(III), into oxide-based lattices is a plausible explanation.

NASA Center ARC↗
NASA NTRS2019

Near-infrared Spectroscopy of Galaxies During Reionization: Measuring C III] in a Galaxy at z = 7.5

We present Keck/MOSFIRE H-band spectroscopy targeting C III] λ1907, 1909 in a z = 7.5056 galaxy previously identified via Lyα emission. We detect strong line emission at 1.621 ± 0.002 mm with a line flux of (2.63 ± 0.52) × 10−18 erg s−1cm−2. We tentatively identify this line as [C III] λ1907, but we are unable to detect C III] λ1909 owing to sky emission at the expected location. This gives a galaxy systemic redshift, zsys = 7.5032 ± 0.0003, with a velocity offset to Lyα of DvLya = 88 ± 27 km s−1. The ratio of combined C III]/Lyα is 0.30–0.45, one of the highest values measured for any z > 2 galaxy. We do not detect Si III] λλ1883, 1892, and place an upper limit on Si III]/C III] < 0.35 (2σ). Comparing our results to photoionization models, the C III] equivalent width (WC III] = 16.23 ± 2.32 Å), low Si III]/C III] ratio, and high implied [O III] equivalent width (from the Spitzer/IRAC [3.6]–[4.5] ~- 0.8 mag color) require subsolar metallicities (Z ~- 0.1–0.2 Zsun) and a high ionization parameter, log U >~ 1.5. These results favor models that produce higher ionization, such as the BPASS models for the photospheres of high-mass stars, and that include both binary stellar populations and/or an IMF that extends to 300 Me. The combined C III] equivalent width and [3.6]–[4.5] color are more consistent with ionization from young stars than active galactic nuclei (AGNs); however, we cannot rule out ionization from a combination of an AGN and young stars. We make predictions for James Webb Space Telescope spectroscopy using these different models, which will ultimately test the nature of the ionizing radiation in this source.

reionization↗
NASA NTRS2014

A Reliability Model for Ni-BaTiO3-Based (BME) Ceramic Capacitors

The evaluation of multilayer ceramic capacitors (MLCCs) with base-metal electrodes (BMEs) for potential NASA space project applications requires an in-depth understanding of their reliability. The reliability of an MLCC is defined as the ability of the dielectric material to retain its insulating properties under stated environmental and operational conditions for a specified period of time t. In this presentation, a general mathematic expression of a reliability model for a BME MLCC is developed and discussed. The reliability model consists of three parts: (1) a statistical distribution that describes the individual variation of properties in a test group of samples (Weibull, log normal, normal, etc.), (2) an acceleration function that describes how a capacitors reliability responds to external stresses such as applied voltage and temperature (All units in the test group should follow the same acceleration function if they share the same failure mode, independent of individual units), and (3) the effect and contribution of the structural and constructional characteristics of a multilayer capacitor device, such as the number of dielectric layers N, dielectric thickness d, average grain size r, and capacitor chip size S. In general, a two-parameter Weibull statistical distribution model is used in the description of a BME capacitors reliability as a function of time. The acceleration function that relates a capacitors reliability to external stresses is dependent on the failure mode. Two failure modes have been identified in BME MLCCs: catastrophic and slow degradation. A catastrophic failure is characterized by a time-accelerating increase in leakage current that is mainly due to existing processing defects (voids, cracks, delamination, etc.), or the extrinsic defects. A slow degradation failure is characterized by a near-linear increase in leakage current against the stress time; this is caused by the electromigration of oxygen vacancies (intrinsic defects). The two identified failure modes follow different acceleration functions. Catastrophic failures follow the traditional power-law relationship to the applied voltage. Slow degradation failures fit well to an exponential law relationship to the applied electrical field. Finally, the impact of capacitor structure on the reliability of BME capacitors is discussed with respect to the number of dielectric layers in an MLCC unit, the number of BaTiO3 grains per dielectric layer, and the chip size of the capacitor device.

reliability↗
NASA NTRS1976

Theoretical models of Beta Cephei stars constructed with new radiative opacities

Equilibrium models for the main-sequence and early post-main-sequence phases of evolution are constructed for stars of 10.9 and 15 solar masses with two different initial hydrogen and metals abundances. Carson's (1976) radiative opacities are used in the calculations. It is found that the models which lie off the zero-age main sequence have cooler effective temperatures than corresponding models based on other opacities and cross the observed Beta Cephei strip in the H-R diagram only during the main phase of core hydrogen burning. The stability of radial and nonradial pulsations is studied by applying linear nonadiabatic perturbations to the models. The results show that all the modes examined are stable and that the margin of stability decreases with advancing evolution. It is suggested that the closeness of the periods of the two lowest nonradial quadrupole p-modes may be responsible for the 'beat' phenomenon observed in many Beta Cephei stars, if these modes are somehow excited. Possible instability mechanisms are evaluated, particularly the ultimate ionization of CNO elements.

Stothers, R.↗
NASA NTRS1971

Noninteracting Fermi gas in a square-well potential.

The problem of a noninteracting Fermi gas in a finite square-well potential is solved analytically in the limit that the well becomes infinitely wide. The errors of previous authors using this model as a first approximation to the problem of a simple metal with surfaces are pointed out.

Nash, C. E.↗
NASA NTRS1972

Surface properties of thermionic electrodes

A quasi-equilibrium model which provides semiquantitative predictions of the oxygen reaction with refractory metals was developed at high temperature and low pressure. Extensive experimental data was obtained on adsorption and work function properties for a wide variety of adsorbates (Cs, K, Na, I, Br, Cl, and O) on several refractory metals (W, Ta, Mo, and Re). Conclusions and recommendations for research on alkali metal adsorption, oxygen adsorption, and adsorption of cesium - oxygen mixtures are included.

Stickney, R. E.↗
NASA NTRS1973

Release of Bacterial Spores from the Inner Walls of a Stainless Steel Cup Subjected to Thermal Stresses and Mechanical Shock

The release and fallout of particulates from surfaces afforded thermal or impact stress is of concern for control of contamination of Mars from planetary landing vehicles. A metal vessel contaminated by aerosols of spores was used as a model system and the fallout of spores as affected by various mechanisms was examined. Thermal stresses simulating those expected on the Mars lander dislodged approximately .01% of the aerosol deposited surface burden as did a landing shock of 8 to 10G deceleration. Spores imprinted by finger or swab contact yielded similar results. In all cases where repeated cycling of temperature, motion, or shock were employed the majority of fallout occurred in the first cycle. Particles released from the surface were predominantly in the size range 1 to 5 microns.

Wolochow, H.↗
NASA NTRS1974

Evaporative segregation in 80% Ni-20% Cr and 60% Fe-40% Ni alloys

An analytical approach is outlined to calculate the evaporative segregation behavior in metallic alloys. The theoretical predictions are based on a 'normal' evaporation model and have been examined for Fe-Ni and Ni-Cr alloys. A fairly good agreement has been found between the predicted values and the experimental results found in the literature.

Gupta, K. P.↗
NASA NTRS1977

Molecular cluster theory of CO chemisorption on a nickel /100/ surface

Self-consistent Hartree-Fock-Slater molecular cluster models for the chemisorption of carbon monoxide on a (100) transition metal surface are presented. Energy levels and charge distribution for the CO:Ni5 cluster in C sub 4v symmetry are obtained, and the variation of binding energies with height of the CO molecule above the surface of nickel is studied in detail. Comparison is made with experimental binding energy spectra and with the multiple-scattering results of Batra and Bagus. The redistribution in energy of free-atom valence levels is studied by means of local-densities-of-states diagrams.

Ellis, D. E.↗
NASA NTRS1975

A model for the evolution of opaques in mare lavas

The apparent 'reduced' state of the opaque mineral assemblages of mare basalts has led to various hypotheses on their origin through reduction by various media. A model is developed whereby the presence of trivalent titanium (Ti/3+/) and metallic iron in mare lavas at low oxygen fugacities automatically leads to the production of the observed assemblages by cooling near the mare basalt solidus. The 'reduced' assemblages may evolve isochemically at oxygen fugacities near the iron-ilmenite-ferropseudobrookite buffer by a reaction of the form Fe(2+)+2 Ti(3+) = metallic iron +2 Ti(4+).

Haselton, J. D.↗
NASA NTRS1982

Experimental measurement of passive material and structural damping for flexible space structures

Among the design objectives for large space structures are the maintenance of tight dimensional tolerance and the reduction of settling time after disturbance input. Two options are under consideration for the design of flexible structures to meet these objectives, including an active control option and a passive control option. In connection with both options, it is necessary to include material and structural damping in the design. A description is presented of the results of an experimental investigation of the damping of metallic and fibrous composite materials, taking into account also the analytical modeling and experimental verification of frictional damping schemes. To demonstrate how material and frictional damping can be combined, a simple structural optimization is performed, indicating the potential for significant savings in mass by the addition of frictional dampers.

Crawley, E. F.↗