Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Quantitative characterization of spatial distribution of particles in materials: Application to materials processing

Most engineering materials contain second phase particles or fibers which serve to reinforce the matrix phase. The effect of reinforcements on material properties is usually analyzed in terms of the average volume fraction and spacing of reinforcements, quantities which are global microstructural characteristics. However, material properties can also depend on local microstructural characteristics; for example, on how uniformly the reinforcing phase is distributed in the material. The analysis method will then be applied to a materials processing problem to discover how processing parameters can be selected to maximize redistribution of the reinforcing phase during processing. Several mathematical analysis methods could be adapted to the problem of characterizing the distribution of particles in materials. A tessellation-based method was selected. In the first phase of the investigation, a software package was written to automate the analysis. Typical results are shown. The analysis technique allows the degree to which particles are clustered together, the size and spacing of particle clusters, and the particle density in clusters to be found. The analysis methods were applied to computer-generated distributions and to a few real particle-containing materials. Methods for analyzing a nonuniform particle distribution in a material can be applied to two broad classes of materials science problems: understanding how the resulting particle distribution affects properties. The analysis method described is applied to a materials processing problem: how to select extrusion conditions to maximize the redistribution of reinforcing particles that are initially nonuniformly distributed. In addition, the tessellation-based method to analyze star distributions in spiral galaxies was adapted, illustrating the diverse types of problems to which the analysis method can be applied.

Parse, J. B.↗

Machine learning based inverse modeling of full-field strain distribution for mechanical characterization of a linear elastic and heterogeneous membrane

Heterogeneous membranes or films are thin and soft structures with spatial variations in material property and thickness. Mechanical behavior of heterogeneous membranes is not well understood, mainly due to the difficulty in obtaining accurate and reliable material property data. To understand the mechanical behavior of these materials, accurate and efficient characterization methods for heterogeneous membranes are needed. Here, in this paper, an inverse method based on machine learning is developed to efficiently extract mechanical properties from full-field strain distributions. This approach is demonstrated on a flat heterogeneous membrane with uniform thickness formed by up to four linear elastic synthetic materials in a grid arrangement, and deforming in a moderate strain range (true strain ~10%). The results show that the machine learning method achieves accuracy comparable to the traditional inverse finite element method, and is 6 orders of magnitude faster in the demonstrated case studies.

36 MATERIALS SCIENCE↗

System and method for generating and/or screening potential metal-organic frameworks

A system and method for systematically generating potential metal-organic framework (MOFs) structures given an input library of building blocks is provided herein. One or more material properties of the potential MOFs are evaluated using computational simulations. A range of material properties (surface area, pore volume, pore size distribution, powder x-ray diffraction pattern, methane adsorption capability, and the like) can be estimated, and in doing so, illuminate unidentified structure-property relationships that may only have been recognized by taking a global view of MOF structures. In addition to identifying structure-property relationships, this systematic approach to identify the MOFs of interest is used to identify one or more MOFs that may be useful for high pressure methane storage.

36 MATERIALS SCIENCE↗

System and method for generating and/or screening potential metal-organic frameworks

A system and method for systematically generating potential metal-organic framework (MOFs) structures given an input library of building blocks is provided herein. One or more material properties of the potential MOFs are evaluated using computational simulations. A range of material properties (surface area, pore volume, pore size distribution, powder x-ray diffraction pattern, methane adsorption capability, and the like) can be estimated, and in doing so, illuminate unidentified structure-property relationships that may only have been recognized by taking a global view of MOF structures. In addition to identifying structure-property relationships, this systematic approach to identify the MOFs of interest is used to identify one or more MOFs that may be useful for high pressure methane storage.

36 MATERIALS SCIENCE↗

A Simple Computational Proxy for Screening Magnetocaloric Compounds

Alternating cycles of isothermal magnetization and adiabatic demagnetization applied to a magnetocaloric material can drive refrigeration in very much the same manner as cycles of gas compression and expansion. The material property of interest in finding candidate magnetocaloric materials is ΔS M , their gravimetric entropy change upon application of a magnetic field under isothermal conditions. There is, however, no general method for screening materials for such an entropy change without actually performing the relevant, time- and effort-intensive magnetic measurements. Here we propose a simple computational proxy based on performing nonmagnetic and magnetic density functional theory calculations on magnetic materials. This proxy, which we term the magnetic deformation Σ M , is a measure of how much the unit cell deforms comparing with the relaxed structures with and without the inclusion of spin polarization. Σ M appears to correlate very well with experimentally measured magnetic entropy change values. Here, the proxy has been tested against 33 ferromagnetic materials with known ΔS M , including nine materials newly measured for this study. It has then been used to screen 134 ferromagnetic materials for which the magnetic entropy has not yet been reported, identifying 30 compounds as being promising for further study. As a demonstration of the effectiveness of our approach, we have prepared one of these compounds and measured its isothermal entropy change. MnCoP, with a T C of 575 K, shows a maximal ΔS M of –6.0 J kg –1 K –1 for an H = 5 T applied field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bilinear electric-field characteristics in the problem of the galvanomagnetic properties of composite materials

Some general properties of the effective conductivity tensor σ̂{sub e} of a composite material placed in magnetic field H are considered. It is shown that the derivatives of the tensor σ̂{sub e} components with respect to their arguments can be expressed in terms of various bilinear characteristics, namely, the mean products of the electric fields in an initial system and the “transposed” system (which differs from the initial system in the substitution H → −H). At H → 0, the general formulas derived in this work yield the well-known expressions for the Hall coefficient and magnetoresistance that are valid for the case of weak magnetic fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hot Isostatic Press Manufacturing Process Development for Fabrication of RERTR Monolithic Fuel Plates

We use experimentation and finite element modeling to study a Hot Isostatic Press (HIP) manufacturing process for U-10Mo Monolithic Fuel Plates. Finite element simulations are used to identify the material properties affecting the process and improve the process geometry. Accounting for the high temperature material properties and plasticity is important to obtain qualitative agreement between model and experimental results. The model allows us to improve the process geometry and provide guidance on selection of material and finish conditions for the process strongbacks. We conclude that the HIP can must be fully filled to provide uniform normal stress across the bonding interface.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Backfilling of Geological Disposal Facilities - Development of Optimized Backfill Material - 18146

In Belgium, low- and intermediate-level waste (B-waste) will be conditioned in concrete monoliths and high-level waste (C-waste) in so-called Super-containers (SCs). The Belgian radioactive waste management program has focused on the disposal of these waste types in two emplacement fields of a geological disposal facility (GDF). When the disposal waste packages (DWP) have been emplaced, backfilling of the galleries is supposed to be carried out in order to stabilize the galleries, to reduce voids, to guarantee a favourable chemical milieu with regard to the retention of the radionuclides, to minimize a possible gas pressure build-up, to dissipate radioactive decay heat and to enable good conditions for a potential retrieval of the DWP. The current reference solution is to mix the backfill at the surface and then to pump the mixture through pipeline distribution systems into the underground structures. The catalogue of backfill material requirements comprises common, but also different requirements due to the characteristics of the B and C waste packages and differences in the backfilling systems. It was found that two backfill material recipes have to be developed. Different requirements, such as high porosity (low strength and low gas threshold pressure) and high thermal conductivity have contrary consequences for the material. In addition, during backfill production quality variations of the raw materials that influence the backfill material properties can occur. Different lengths of the delivery pipeline may require adjustments of the material composition. In order to consider the practical experiences of backfill material production, one focus of the development programs was to identify compositional ranges that guarantee the respective material property. A combination of the individual 'conformity fields' results in optimal solutions for the standard operating conditions as well as a compositional range that guarantees compliance with the required material specifications. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Neural Network Enhanced RKPM for Electrochemical-Mechanical Coupled Damage Modeling of Energy Storage Materials

Energy storage materials undergo significant charge cycling, which makes understanding their reliability and durability fundamental in predicting performance and service life. Strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking, largely along material interfaces and grain boundaries. For Li-ion batteries, for example, lithium moving between electrodes during charging and discharging process causes expansion and contraction of grains, and the strongly anisotropic and nonlinearly [Li]-dependent grain material properties can cause grains to expand into and contract away from each other, leading to chemo-mechanical cracking. In the first part of this work, a RKPM based computational framework for solving the coupled solid-phase lithium conservation with Fickian diffusion and the lithium concentration dependent anisotropic mechanical problem subjected to a highly nonlinear Butler-Volmer boundary condition is introduced. The choice of RKPM completeness conditions for lithium concentration and mechanical deformation fields, and the variational consistency condition for the domain integration of the coupled problem is first determined. In the second part of this work, a neural network-enhanced reproducing kernel particle method (NN-RKPM) [1] is leveraged to accurately capture damage and crack propagation throughout the material, by learning the location, orientation, and sharpness of discontinuity while allowing for a coarser nodal distribution than that is necessary for capturing sharp solution transitions using traditional mesh-based methods. NN-RKPM is used to inform how crack opening and closure in turn affect the coupled chemical equations and material microstructure.

damage modeling↗

Coatings of Fe/FeAIN Thin Films

We report new results on materials properties of Fe/FeAIN thin films. Films were fabricated via a pulsed DC sputtering technique. Sputtering target materials were FeAl where x varies from 0.025 to 1. Film thickness varied from 0.01 to 4 micrometers, and particle size varied from 5 to 100 nanometers, depending on the fabrication conditions and target materials. A film with 22 layers was also fabricated via the sputtering technique. Materials properties of the films were analyzed by SEM/EDS, XRD, RBS, and ESCA (XPS).

36 MATERIALS SCIENCE↗

Influence of processing factors on the physical metallurgy of LENS deposited 316L stainless steel.

Directed energy deposition (DED) is a type of additive manufacturing (AM) process; Laser Engineered Net Shaping (LENS) is a commercial DED process. We are developing LENS technology for printing 316L stainless steel components for structural applications. It is widely known that material properties of AM components are process dependent, attributed to different molten metal incorporation and thermal transport mechanisms. This investigation focuses on process-structure-property relationships for LENS deposits for enabling the process development and optimization to control material property. We observed interactions among powder melting, directional molten metal flow, and the molten metal solidification. The resultant LENS induced microstructure found to be dictated by the process-related characteristics, i.e., interpass boundaries from multi-layer deposition, molten metal flow lines, and solidification dendrite cells. Each characteristic bears the signature of the unique localized thermal history during deposition. Correlation observed between localized thermal transport, resultant microstructure, and its subsequent impact on the mechanical behavior of the current 316L is discussed. We also discuss how the structures of interpass boundaries are susceptible to localized recrystallization, grain growth and/or defect formation, and therefore, heterogeneous mechanical properties due to the adverse presence of unmelted powder inclusions.

36 MATERIALS SCIENCE↗

Effect of solution concentration on ethylene propylene diene monomer (EPDM) nonmetallic components used in caustic liquid waste transfer lines

The hose-in-hose transfer lines (HIHTL) used to transfer waste at the United States Department of Energy’s Hanford Site Tank Farm are fabricated from an ethylene propylene diene monomer (EPDM) synthetic rubber. During waste transport, these hoses are exposed to several stressors including caustic solutions at high temperatures and high pressures, as well as β and γ radiation. The aging behavior of HIHTL and dog-bone shaped EPDM specimens were evaluated by exposure to solutions at 77 °C containing 0.00, 6.25, 12.50, and 25.00 % (v/v) sodium hydroxide (NaOH) for 12-months. After the exposure, the material properties of the specimens were measured and compared to the unaged samples. The material properties evaluated included the tensile strength of the EPDM dog-bone samples and the burst pressure of the HIHTL. Both the tensile strength of the EPDM dog-bone samples and the burst pressure of the HIHTL specimens exposed to the 6.25 % NaOH solution exhibited the most significant deterioration and those exposed to 25.00 % NaOH solution had the least deterioration. Finally, examination of the HIHTL and the EPDM dog-bone specimens with scanning electron microscopy showed that the deterioration for the specimens exposed to 6.25 % NaOH solution were the most severe and the samples exposed to 25.00 % NaOH solution had the least deterioration.

42 ENGINEERING↗

Prediction of initiation of low and high explosive fillers due to fragment or projectile impact

A methodology is presented which provides predictions for the probability of initiation of explosion in high explosive filled warheads and in propellant filled rocket motor cases given the impact of compact fragments or of small projectiles. Equations of velocities at which 50 percent of the explosive filled cases will initiate either high or low order are developed for compact fragments, and for projectiles. These data are used to establish the standard deviation of the data from the 50 percent initiation line. Standard deviation is used to provide predictions of the probability of initiation given the impact velocity and other pertinent parameters using equations and logic which are established in a computer model. This computer model uses fragment material properties and encounter parameters to predict fragment impact initiation, and projectile and casing material properties and encounter parameters to predict projectile impact initiation.

Zabel, P. H.↗

Handbook for Additively Manufactured Materials: Microstructure, Properties, and Fractography

As the additive manufacturing (AM) industry has grown and the processes have matured more alloys have been adapted to the various AM processes. Understanding the microstructure and properties of these AM alloys is important in designing parts that perform appropriately in application. For decades materials handbooks have been informative references for designers and engineers alike to know what properties and microstructures to expect in alloys produced by other forms of manufacturing. AM alloy references for properties and microstructures have been largely limited to literature that may not be subject to the same industry standard heat treatments or in standard process parameters. NASA has worked with partners to characterize various commercially available AM alloys with a high degree of traceability. This work aims utilize industry-relevant, traceable datasets to develop a new handbook for AM alloys to better inform designers and engineers of the microstructures, fractures, and first order properties from over 30 AM alloys produced across the industry.

Additive Manufacturing↗

FEA Simulations of Magnets with Grain Oriented Steel

One of the potential successors of the Large Hadron Collider is a Muon Collider. Muons are short-lived particles, which therefore require fast acceleration. One potential avenue is a very fast cycling cyclotron, where the bending is sup- plied by a combination of fixed-field superconducting magnets and fast ramping normal conducting iron-cored coils. Due to the high ramping rate (around 1 kHz) eddy current and hysteresis losses are a concern. One way to overcome these is by using grain-oriented soft-iron, which promises superior magnetic properties in the direction of the grains. This note summarizes efforts to include the anisotropic material properties of grain-oriented steel in finite element analysis to predict the behaviour of the dipole magnets for this accelerator. It was found that including anisotropic material properties has a detrimental effect on model convergence. During this study it was not possible to include grain oriented steel with an accuracy necessary to study the field quality of a dipole magnet.

43 PARTICLE ACCELERATORS↗

Properties of materials in high pressure hydrogen at room and elevated temperatures

Experimental efforts in this program for this period. Mechanical property tests of wrought and cast nickel-base alloys and one wrought cobalt-base alloy were conducted in 34.5 MN/sq m (5000-psig) helium and hydrogen or hydrogen mixtures. Comparison of test results was made to determine degradation of properties due to the hydrogen environments. All testing was conducted on solid specimens exposed to external gaseous pressure. Specific mechanical properties determined and the testing methods used are summarized.

Harris, J. A., Jr.↗

Properties of materials in high pressure hydrogen at cryogenic, room, and elevated temperatures

Various tests were conducted to determine the mechanical properties of 12 alloys that are commonly used or proposed for use in pressurized gaseous hydrogen or hydrogen containing environments. Properties determined in the hydrogen environments were compared to properties determined in a pure helium environment at the same conditions to establish environmental degradation. The specific mechanical properties tested include: high-cycle fatigue, low-cycle fatigue, fracture mechanics, creep-rupture, and tensile.

Harris, J. A., Jr.↗

Influences on particle shape in underwater pelletizing processes

Underwater pelletizing has gained high importance within the last years among the different pelletizing technologies, due to its advantages in terms of throughput, automation, pellet quality and applicability to a large variety of thermoplastics. The resulting shape and quality of pellets, however, differ widely, depending on material characteristics and effects not fully understood yet. In an experimental set-up, pellets of different volumes and shapes were produced and the medium pellet mass, the pellet surface and the bulk density were analyzed in order to identify the influence of material properties and process parameters. Additionally, the shaping kinetics at the die opening were watched with a specially developed camera system. It was found that rheological material properties correlate with process parameters and resulting particle form in a complex way. Higher cutting speeds were shown to have a deforming influence on the pellets, leading to less spherical s and lower bulk densities. More viscous materials, however, showed a better resistance against this. Generally, the viscous properties of polypropylene proofed to be dominant over the elastic ones in regard to their influence on pellet shape. It was also shown that the shapes filmed at the die opening and the actual form of the pellets after a cooling track do not always correlate, indicating a significant influence of thermodynamic properties during the cooling.

36 MATERIALS SCIENCE↗