Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Markov Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Identification and control of NASA's ACES structures

Results are presented of identification and control experiments on NASA's ACES structure at the Marshall Space Flight Center. The models used for controller design were obtained from identification experiments employing the algorithm Q-Markov cover. The OVC algorithm used for control design produces a controller minimizing the control energy of the closed-loop system, subject to inequality constraints on each of the output variances. The identified model matches the experimental data for the ACES structure reasonably well. The line of sight pointing errors of the structure are substantially reduced by the controllers.

Liu, K.↗
DOE OSTI2015

Joint Planck and WMAP assessment of low CMB multipoles

The remarkable progress in cosmic microwave background (CMB) studies over past decade has led to the era of precision cosmology in striking agreement with the ΛCDM model. However, the lack of power in the CMB temperature anisotropies at large angular scales (low-ℓ), as has been confirmed by the recent Planck data also (up to 0ℓ=4), although statistically not very strong (less than 3σ), is still an open problem. One can avoid to seek an explanation for this problem by attributing the lack of power to cosmic variance or can look for explanations i.e., different inflationary potentials or initial conditions for inflation to begin with, non-trivial topology, ISW effect etc. Features in the primordial power spectrum (PPS) motivated by the early universe physics has been the most common solution to address this problem. In the present work we also follow this approach and consider a set of PPS which have features and constrain the parameters of those using WMAP 9 year and Planck data employing Markov-Chain Monte Carlo (MCMC) analysis. The prominent feature of all the models of PPS that we consider is an infra-red cut off which leads to suppression of power at large angular scales. We consider models of PPS with maximum three extra parameters and use Akaike information criterion (AIC) and Bayesian information criterion (BIC) of model selection to compare the models. For most models, we find good constraints for the cut off scale k{sub c}, however, for other parameters our constraints are not that good. We find that sharp cut off model gives best likelihood value for the WMAP 9 year data, but is as good as power law model according to AIC. For the joint WMAP 9 + Planck data set, Starobinsky model is slightly preferred by AIC which is also able to produce CMB power suppression up to 0ℓ≤3 to some extent. However, using BIC criteria, one finds model(s) with least number of parameters (power law model) are always preferred.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Model reduction methods for population dynamics with fast-switching environments: Reduced master equations, stochastic differential equations, and applications

Here we study stochastic population dynamics coupled to fast external environments and combine expansions in the inverse switching rate of the environment and a Kramers–Moyal expansion in the inverse size of the population. This leads to a series of approximation schemes, capturing both intrinsic and environmental noise. These methods provide a means of efficient simulation and we show how they can be used to obtain analytical results for the fluctuations of population dynamics in switching environments. We place the approximations in relation to existing work on piecewise-deterministic and piecewise-diffusive Markov processes. Finally, we demonstrate the accuracy and efficiency of these model-reduction methods in different research fields, including systems in biology and a model of crack propagation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Linking big models to big data: efficient ecosystem model calibration through Bayesian model emulation

Data-model integration plays a critical role in assessing and improving our capacity to predict ecosystem dynamics. Similarly, the ability to attach quantitative statements of uncertainty around model forecasts is crucial for model assessment and interpretation and for setting field research priorities. Bayesian methods provide a rigorous data assimilation framework for these applications, especially for problems with multiple data constraints. However, the Markov chain Monte Carlo (MCMC) techniques underlying most Bayesian calibration can be prohibitive for computationally demanding models and large datasets. We employ an alternative method, Bayesian model emulation of sufficient statistics, that can approximate the full joint posterior density, is more amenable to parallelization, and provides an estimate of parameter sensitivity. Analysis involved informative priors constructed from a meta-analysis of the primary literature and specification of both model and data uncertainties, and it introduced novel approaches to autocorrelation corrections on multiple data streams and emulating the sufficient statistics surface. We report the integration of this method within an ecological workflow management software, Predictive Ecosystem Analyzer (PEcAn), and its application and validation with two process-based terrestrial ecosystem models: SIPNET and ED2. In a test against a synthetic dataset, the emulator was able to retrieve the true parameter values. A comparison of the emulator approach to standard brute-force MCMC involving multiple data constraints showed that the emulator method was able to constrain the faster and simpler SIPNET model's parameters with comparable performance to the brute-force approach but reduced computation time by more than 2 orders of magnitude. The emulator was then applied to calibration of the ED2 model, whose complexity precludes standard (brute-force) Bayesian data assimilation techniques. Both models are constrained after assimilation of the observational data with the emulator method, reducing the uncertainty around their predictions. Performance metrics showed increased agreement between model predictions and data. Our study furthers efforts toward reducing model uncertainties, showing that the emulator method makes it possible to efficiently calibrate complex models.

58 GEOSCIENCES↗
DOE OSTI2017

Emulating Simulations of Cosmic Dawn for 21 cm Power Spectrum Constraints on Cosmology, Reionization, and X-Ray Heating

Current and upcoming radio interferometric experiments are aiming to make a statistical characterization of the high-redshift 21 cm fluctuation signal spanning the hydrogen reionization and X-ray heating epochs of the universe. However, connecting 21 cm statistics to the underlying physical parameters is complicated by the theoretical challenge of modeling the relevant physics at computational speeds quick enough to enable exploration of the high-dimensional and weakly constrained parameter space. In this work, we use machine learning algorithms to build a fast emulator that can accurately mimic an expensive simulation of the 21 cm signal across a wide parameter space. We embed our emulator within a Markov Chain Monte Carlo framework in order to perform Bayesian parameter constraints over a large number of model parameters, including those that govern the Epoch of Reionization, the Epoch of X-ray Heating, and cosmology. As a worked example, we use our emulator to present an updated parameter constraint forecast for the Hydrogen Epoch of Reionization Array experiment, showing that its characterization of a fiducial 21 cm power spectrum will considerably narrow the allowed parameter space of reionization and heating parameters, and could help strengthen Planck's constraints on σ{sub 8}. We provide both our generalized emulator code and its implementation specifically for 21 cm parameter constraints as publicly available software.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2012

Pulsar Emission Geometry and Accelerating Field Strength

The high-quality Fermi LAT observations of gamma-ray pulsars have opened a new window to understanding the generation mechanisms of high-energy emission from these systems, The high statistics allow for careful modeling of the light curve features as well as for phase resolved spectral modeling. We modeled the LAT light curves of the Vela and CTA I pulsars with simulated high-energy light curves generated from geometrical representations of the outer gap and slot gap emission models. within the vacuum retarded dipole and force-free fields. A Markov Chain Monte Carlo maximum likelihood method was used to explore the phase space of the magnetic inclination angle, viewing angle. maximum emission radius, and gap width. We also used the measured spectral cutoff energies to estimate the accelerating parallel electric field dependence on radius. under the assumptions that the high-energy emission is dominated by curvature radiation and the geometry (radius of emission and minimum radius of curvature of the magnetic field lines) is determined by the best fitting light curves for each model. We find that light curves from the vacuum field more closely match the observed light curves and multiwavelength constraints, and that the calculated parallel electric field can place additional constraints on the emission geometry

DeCesar, Megan E.↗
DOE OSTI2019

First study of reionization in tilted flat and untilted non-flat dynamical dark energy inflation models

We examine the effects of dark energy dynamics and spatial curvature on cosmic reionization by studying reionization in tilted spatially flat and untilted non-flat XCDM and $\phi$CDM dynamical dark energy inflation models that best fit the Planck 2015 cosmic microwave background (CMB) anisotropy and a large compilation of non-CMB data. We carry out a detailed statistical study, based on a principal component analysis and a Markov chain Monte Carlo analysis of a compilation of lower-redshift reionization data to estimate the uncertainties in the cosmological model reionization histories. We find that, irrespective of the nature of dark energy, there are significant differences between the reionization histories of the spatially flat and non-flat models. Although both the flat and non-flat models can accurately match the low-redshift ( z ≲ 6) reionization observations, there is a clear discrepancy between high-redshift ( z > 7) Lyman-α emitter data and the predictions from non-flat models. This is solely due to the fact that the non-flat models have a significantly larger electron scattering optical depth, τ el , compared to the flat models, which requires an extended and much earlier reionization scenario supported by more high-redshift ionizing sources in the non-flat models. Non-flat models also require strong redshift evolution in the photon escape fraction, which can become unrealistically high (≳1) at some redshifts. However, τ el is about 0.9-σ lower in the tilted flat ΛCDM model when the new Planck 2018 data are used and this reduction will partially alleviate the tension between the non-flat model predictions and the data.

Astronomy & Astrophysics↗
NASA NTRS1984

Data flow modeling techniques

There have been a number of simulation packages developed for the purpose of designing, testing and validating computer systems, digital systems and software systems. Complex analytical tools based on Markov and semi-Markov processes have been designed to estimate the reliability and performance of simulated systems. Petri nets have received wide acceptance for modeling complex and highly parallel computers. In this research data flow models for computer systems are investigated. Data flow models can be used to simulate both software and hardware in a uniform manner. Data flow simulation techniques provide the computer systems designer with a CAD environment which enables highly parallel complex systems to be defined, evaluated at all levels and finally implemented in either hardware or software. Inherent in data flow concept is the hierarchical handling of complex systems. In this paper we will describe how data flow can be used to model computer system.

Kavi, K. M.↗
DOE OSTI2017

Coupled land surface–subsurface hydrogeophysical inverse modeling to estimate soil organic carbon content and explore associated hydrological and thermal dynamics in the Arctic tundra

Quantitative characterization of soil organic carbon (OC) content is essential due to its significant impacts on surface–subsurface hydrological–thermal processes and microbial decomposition of OC, which both in turn are important for predicting carbon–climate feedbacks. While such quantification is particularly important in the vulnerable organic-rich Arctic region, it is challenging to achieve due to the general limitations of conventional core sampling and analysis methods, and to the extremely dynamic nature of hydrological–thermal processes associated with annual freeze–thaw events. In this study, we develop and test an inversion scheme that can flexibly use single or multiple datasets – including soil liquid water content, temperature and electrical resistivity tomography (ERT) data – to estimate the vertical distribution of OC content. Our approach relies on the fact that OC content strongly influences soil hydrological–thermal parameters and, therefore, indirectly controls the spatiotemporal dynamics of soil liquid water content, temperature and their correlated electrical resistivity. We employ the Community Land Model to simulate nonisothermal surface–subsurface hydrological dynamics from the bedrock to the top of canopy, with consideration of land surface processes (e.g., solar radiation balance, evapotranspiration, snow accumulation and melting) and ice–liquid water phase transitions. For inversion, we combine a deterministic and an adaptive Markov chain Monte Carlo (MCMC) optimization algorithm to estimate a posteriori distributions of desired model parameters. For hydrological–thermal-to-geophysical variable transformation, the simulated subsurface temperature, liquid water content and ice content are explicitly linked to soil electrical resistivity via petrophysical and geophysical models. We validate the developed scheme using different numerical experiments and evaluate the influence of measurement errors and benefit of joint inversion on the estimation of OC and other parameters. We also quantify the propagation of uncertainty from the estimated parameters to prediction of hydrological–thermal responses. We find that, compared to inversion of single dataset (temperature, liquid water content or apparent resistivity), joint inversion of these datasets significantly reduces parameter uncertainty. We find that the joint inversion approach is able to estimate OC and sand content within the shallow active layer (top 0.3 m of soil) with high reliability. Due to the small variations of temperature and moisture within the shallow permafrost (here at about 0.6 m depth), the approach is unable to estimate OC with confidence. However, if the soil porosity is functionally related to the OC and mineral content, which is often observed in organic-rich Arctic soil, the uncertainty of OC estimate at this depth remarkably decreases. Our study documents the value of the new surface–subsurface, deterministic–stochastic inversion approach, as well as the benefit of including multiple types of data to estimate OC and associated hydrological–thermal dynamics.

58 GEOSCIENCES↗
NASA NTRS2016

Probabilistic Prognosis of Non-Planar Fatigue Crack Growth

Quantifying the uncertainty in model parameters for the purpose of damage prognosis can be accomplished utilizing Bayesian inference and damage diagnosis data from sources such as non-destructive evaluation or structural health monitoring. The number of samples required to solve the Bayesian inverse problem through common sampling techniques (e.g., Markov chain Monte Carlo) renders high-fidelity finite element-based damage growth models unusable due to prohibitive computation times. However, these types of models are often the only option when attempting to model complex damage growth in real-world structures. Here, a recently developed high-fidelity crack growth model is used which, when compared to finite element-based modeling, has demonstrated reductions in computation times of three orders of magnitude through the use of surrogate models and machine learning. The model is flexible in that only the expensive computation of the crack driving forces is replaced by the surrogate models, leaving the remaining parameters accessible for uncertainty quantification. A probabilistic prognosis framework incorporating this model is developed and demonstrated for non-planar crack growth in a modified, edge-notched, aluminum tensile specimen. Predictions of remaining useful life are made over time for five updates of the damage diagnosis data, and prognostic metrics are utilized to evaluate the performance of the prognostic framework. Challenges specific to the probabilistic prognosis of non-planar fatigue crack growth are highlighted and discussed in the context of the experimental results.

Leser, Patrick E.↗
NASA NTRS1991

Frequency weighted system identification and linear quadratic controller design

Application of filters for frequency weighting of Markov parameters (pulse response functions) is described in relation to system/observer identification. The time domain identification approach recovers a model which has a pulse response weighted according to frequency. The identified model is composed of the original system and filters. The augmented system is in a form which can be used directly for frequency weighted linear quadratic controller design. Data from either single or multiple experiments can be used to recover the Markov parameters. Measured acceleration signals from a truss structure are used for system identification and the model obtained is used for frequency weighted controller design. The procedure makes the identification and controler design complementary problems.

Horta, Lucas G.↗
DOE OSTI2015

Decaying dark matter and the tension in σ{sub 8}

We consider decaying dark matter (DDM) as a resolution to the possible tension between cosmic microwave background (CMB) and weak lensing (WL) based determinations of the amplitude of matter fluctuations, σ{sub 8}. We perform N-body simulations in a model where dark matter decays into dark radiation and develop an accurate fitting formula for the non-linear matter power spectrum, which enables us to test the DDM model by the combined measurements of CMB, WL and the baryon acoustic oscillation (BAO). We employ a Markov chain Monte Carlo analysis to examine the overlap of posterior distributions of the cosmological parameters, comparing CMB alone with WL+BAO. We find an overlap that is significantly larger in the DDM model than in the standard CDM model. This may be hinting at DDM, although current data is not constraining enough to unambiguously favour a non-zero dark matter decay rate Γ. From the combined CMB+WL data, we obtain a lower bound Γ{sup −1}≥ 97 Gyr at 95 % C.L, which is less tight than the constraint from CMB alone.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Occupancy prediction through Markov based feedback recurrent neural network (M-FRNN) algorithm with WiFi probe technology

Accurate occupancy prediction can improve facility control and energy efficiency of buildings. In recent years, buildings’ exiting WiFi infrastructures have been widely studied in the research of occupancy and energy conservation. However, using WiFi to assess occupancy is challenging due to that occupancy information is often characterized stochastically and varies with time and easily disturbed by building components. To overcome such limitations, this study utilizes WiFi probe technology to actively scan WiFi connection requests and responses between access points and network devices of building occupants. With captured signals, this study proposed a Markov based feedback recurrent neural network (M-FRNN) algorithm to model and predict the occupancy profiles. One on-site experiment was conducted to collect ground truth data using camera-based video analysis and the results were used to validate the M-FRNN occupancy prediction model over a 9-day measurement period. From the results, the M-FRNN based occupancy model using WiFi probes shows best accuracies can reach 80.9%, 89.6%, and 93.9% with a tolerance of 2, 3, and 4 occupants respectively. In conclusion, this study demonstrated that WiFi data coupled with stochastic machine learning system can provide a viable alternative to determine a building's occupancy profile.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

First measurement in a magnetic confinement fusion experiment of the H 3 + H 3 → He 5 + n intermediate two-body resonant reaction

We report on the first experimental measurements made at a magnetic confinement fusion device of the tritium(T)-tritium(T) reaction T + T → He 4 + 2 n indicating the presence of the intermediate two-body resonant reaction T + T → He 5 + n . During the second deuterium-tritium campaign (DTE2) at the Joint European Torus, measurements of fusion plasmas with high tritium concentrations, n T / ( n T + n D ) ≈ 0.99 , heated with tritium neutral beam injection, were performed using the neutron time-of-flight (TOF) spectrometer TOFOR. We detect a peak in the neutron emission TOF spectrum consistent with the two-body resonant reaction. The TT neutron emission energy spectrum is modeled using an R -matrix framework where the distributions of the most likely model parameters given our experimental TOF data are determined utilizing a Markov chain Monte Carlo approach. We compare our best estimate of the T + T neutron emission energy spectrum with results obtained at inertial confinement fusion experiments at the OMEGA facility and find a spectral shape that is consistent with the energy dependency in the neutron spectrum observed at OMEGA. Published by the American Physical Society 2024

Physics↗
DOE OSTI2023

EvoProtGrad (Directed Evolution for Proteins with Gradients) [SWR-23-48]

A Python package for directed evolution on a protein sequence with gradient-based discrete Markov chain monte carlo (MCMC). Users are able to compose custom models that map sequence to function with pretrained models, including protein language models (PLMs), to guide and constrain search. Our package natively integrates with the HuggingFace platform and supports PLMs from transformers. Our MCMC sampler identifies promising amino acids to mutate via model gradients taken with respect to the input (i.e., sensitivity analysis). We allow users to compose their own custom target function for MCMC by leveraging the Product of Experts MCMC paradigm. Each model is an "expert" that contributes its own knowledge about the protein's fitness landscape to the overall target function. The sampler is designed to be more efficient and effective than brute force and random search while maintaining most of the generality and flexibility. Additional information can be found in the related publication: https://iopscience.iop.org/article/10.1088/2632-2153/accacd

Emami, Patrick↗
DOE OSTI2017

A Monte Carlo Approach to Magnetar-powered Transients. I. Hydrogen-deficient Superluminous Supernovae

In this paper we collect 19 hydrogen-deficient superluminous supernovae (SLSNe) and fit their light curves, temperature evolution, and velocity evolution based on the magnetar-powered model. To obtain the best-fitting parameters, we incorporate the Markov chain Monte Carlo approach. We get rather good fits for seven events (χ {sup 2}/dof = 0.24–0.96) and good fits for another seven events (χ {sup 2}/dof = 1.37–3.13). We find that the initial periods (P {sub 0}) and magnetic strength (B {sub p}) of the magnetars that supposedly power these SLSNe are in the range of ∼1.2–8.3 ms and ∼(0.2--8.8)×10{sup 14} G, respectively; the inferred masses of the ejecta of these SLSNe are between 1 and 27.6 M{sub ⊙}, and the values of the gamma-ray opacity κ{sub γ} are between 0.01 and 0.82 cm{sup 2} g{sup −1}. We also calculate the fraction of the initial rotational energy of the magnetars harbored in the centers of the remnants of these SLSNe that is converted to the kinetic energy of the ejecta and find that the fraction is ∼19%–97% for different values of P {sub 0} and B {sub p}, indicating that the acceleration effect cannot be neglected. Moreover, we find that the initial kinetic energies of most of these SLSNe are so small (≲2×10{sup 51} erg) that they can be easily explained by the neutrino-driven mechanism. These results can help clarify some important issues related to the energy-source mechanisms and explosion mechanisms and reveal the nature of SLSNe.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1980

Spectral characteristics of convolutionally coded digital signals

The power spectral density of the output symbol sequence of a convolutional encoder is computed for two different input symbol stream source models, namely, an NRZ signaling format and a first-order Markov source. The effects of alternate symbol inversion on this spectrum are also considered. The mathematical results are illustrated with many examples corresponding to optimal performance codes. It is demonstrated that only for the case of a purely random input source (e.g., NRZ data with equiprobable symbols) and a particular class of codes is the output spectrum identical to the input spectrum except for a frequency scaling (expansion) by the reciprocal of the code rate.

Divsalar, D.↗
NASA NTRS1980

An application of extremal field guidance in statistical low thrust guidance analysis

The subject of this paper is the application of extremal field guidance to the covariance analysis of low thrust retargeting guidance. The general procedure for low thrust navigation analysis is briefly reviewed. The basic equations of trajectory optimization and extremal field guidance are presented with emphasis on the low thrust problem. The adopted formulation includes thruster on-off times as control variables and accounts for the effects of model parameter variations. A method of solution of the guidance equations is outlined; and the application of the solution in a covariance analysis, including a procedure for the treatment of model parameter variations as either biases or first order Gauss-Markov stochastic processes, is discussed.

Jacobson, R. A.↗