Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METEOROIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Shock compression and adiabatic release of lunar fines from Apollo 17

An experimental investigation was conducted with the objective to obtain quantitative bounds, in terms of shock pressure and hence meteoroid impact velocity, concerning the conditions required to compact and lithify lunar fines. The measured pressure-particle velocity release states provide a basis for the determination of the approximate values of shock pressure associated with various postshock volumes and temperatures concomitant with solid-state vitrification and thermal melting. The implications of the obtained results for the study of regolith evolution are discussed.

Ahrens, T. J.↗
NASA NTRS1975

Mars

The evolution and physical structure of Mars are discussed primarily on the basis of Mariner 9 observations. The Martian atmosphere, density, and iron abundance are compared with those of earth, and it is noted that the planet was probably formed in less than 100,000 years. Stages in Martian differentiation are described together with the atmospheric composition, condensation and dust clouds, and surface winds. The surface is shown to have a wide diversity of geological landforms resulting from a variety of processes, including meteoroid bombardment, volcanic and tectonic activity, sapping, the action of running water, and wind action. Described landforms include impact craters, volcanic plains and domes, shield volcanoes, sinuous channels and gullies apparently formed by running water, and the enormous canyon system. Mechanisms for climatic change are considered, and questions are posed regarding the possibility of life on Mars.

Pollack, J. B.↗
NASA NTRS1975

Catastrophic rupture of lunar rocks - A Monte Carlo simulation

A computer model based on Monte Carlo techniques was developed to simulate the destruction of lunar rocks by 'catastrophic rupture' due to meteoroid impact. Energies necessary to accomplish catastrophic rupture were derived from laboratory experiments. A crater-production rate derived from lunar rocks was utilized to calculate absolute time scales. Calculated median survival times for crystalline lunar rocks are 1.9, 4.6, 10.3, and 22 m.y. for rock masses of 10, 100, 1000, and 10,000 g, respectively. Corresponding times of 6, 14.5, 32, and 68 million years are required before the probability of destruction reaches 0.99. These results are consistent with absolute exposure ages measured on returned rocks. Some results also substantiate previous conclusions that the catastrophic-rupture process is significantly more effective in obliterating lunar rocks than mass wasting by single-particle abrasion. The view is also corroborated that most rocks presently on the lunar surface either are exhumed from the regolith or are fragments of much larger boulders rather than primary ejecta excavated from pristine bedrock.

Hoerz, F.↗
NASA NTRS1975

Spacecraft recontamination

A computer simulation program to model the redistribution of particulate contaminants on a spacecraft after launch was developed. The component models for particulate adhesion, meteoroid impact, and electrostatic forces are described and intermediate results are presented. The results of a sample calculation show that the recontamination process is important.

Barengoltz, J.↗
NASA NTRS1975

Thermal scale modeling of a manned spacecraft

A manned spacecraft thermal scale modeling program is described. The program consisted of the design, construction, instrumentation, testing, data correlation, and associated analysis of a transient thermal scale model (TSM) of the Subsystem Test Bed (STB). The STB was chosen as a representative manned spacecraft for which detailed thermal vacuum test data were available. The STB is a cylindrical vehicle (15 ft diameter by 8.3 ft high) with four docking hatches and six windows. The pressure shell is insulated with multilayer insulation and protected by meteoroid shields. Four truss assemblies were used to support the STB during testing. It was concluded that thermal scale modeling can be used as an effective thermal design/verification tool for manned spacecraft. Thermal analysis can be used in conjunction with scale model testing to provide a verified math model that can be applied to the prototype manned spacecraft.

Shannon, R. L.↗
NASA NTRS1975

Physical and dynamical studies of meteors. Meteor-fragmentation and stream-distribution studies

Population parameters of 275 streams including 20 additional streams in the synoptic-year sample were found by a computer technique. Some 16 percent of the sample is in these streams. Four meteor streams that have close orbital resemblance to Adonis cannot be positively identified as meteors ejected by Adonis within the last 12000 years. Ceplecha's discrete levels of meteor height are not evident in radar meteors. The spread of meteoroid fragments along their common trajectory was computed for most of the observed radar meteors. There is an unexpected relationship between spread and velocity that perhaps conceals relationships between fragmentation and orbits; a theoretical treatment will be necessary to resolve these relationships. Revised unbiased statistics of synoptic-year orbits are presented, together with parallel statistics for the 1961 to 1965 radar meteor orbits.

Sekanina, Z.↗
NASA NTRS1976

Evaluation of dispersion strengthened nickel-base alloy heat shields for space shuttle application

The results obtained in a program to evaluate dispersion-strengthened nickel-base alloys for use in a metallic radiative thermal protection system operating at surface temperatures to 1477 K for the space shuttle were presented. Vehicle environments having critical effects on the thermal protection system are defined; TD Ni-20Cr characteristics of material used in the current study are compared with previous results; cyclic load, temperature, and pressure effects on sheet material residual strength are investigated; the effects of braze reinforcement in improving the efficiency of spotwelded joints are evaluated; parametric studies of metallic radiative thermal protection systems are reported; and the design, instrumentation, and testing of full scale subsize heat shield panels in two configurations are described. Initial tests of full scale subsize panels included simulated meteoroid impact tests, simulated entry flight aerodynamic heating, programmed differential pressure loads and temperatures simulating mission conditions, and acoustic tests simulating sound levels experienced during boost flight.

Johnson, R., Jr.↗
NASA NTRS1976

Investigation of interplanetary dust from out-of-ecliptic space probes

Measurements of interplanetary dust via zodiacal light observations and direct detection are discussed for an out-of-ecliptic space probe. Particle fluxes and zodiacal light brightnesses were predicted for three models of the dust distribution. These models predict that most of the information will be obtained at space probe distances less than 1 A.U. from the ecliptic plane. Joint interpretation of the direct particle measurements and the zodiacal light data can yield the best knowledge of the three-dimensional particle dynamics, spatial distribution, and physical characteristics of the interplanetary dust. Such measurements are important for an understanding of the origin and role of the dust in relation to meteoroids, asteroids, and comets, as well as the interaction of the dust with solar forces.

Fechtig, H.↗
NASA NTRS1976

Apollo 14 and 16 Active Seismic Experiments, and Apollo 17 Lunar Seismic Profiling

Seismic refraction experiments were conducted on the moon by Apollo astronauts during missions 14, 16, and 17. Seismic velocities of 104, 108, 92, 114 and 100 m/sec were inferred for the lunar regolith at the Apollo 12, 14, 15, 16, and 17 landing sites, respectively. These data indicate that fragmentation and comminution caused by meteoroid impacts has produced a layer of remarkably uniform seismic properties moonwide. Brecciation and high porosity are the probable causes of the very low velocities observed in the lunar regolith. Apollo 17 seismic data revealed that the seismic velocity increases very rapidly with depth to 4.7 km/sec at a depth of 1.4 km. Such a large velocity change is suggestive of compositional and textural changes and is compatible with a model of fractured basaltic flows overlying anorthositic breccias. 'Thermal' moonquakes were also detected at the Apollo 17 site, becoming increasingly frequent after sunrise and reaching a maximum at sunset. The source of these quakes could possibly be landsliding.

Source record↗
NASA NTRS1976

Impact ejecta on the moon

The partitioning of energy and the distribution of the resultant ejecta on the moon is numerically modeled using a Eulerian finite difference grid. The impact of an iron meteoroid at 15 km/sec on a gabbroic anorthosite lunar crust is examined. The high speed impact induced flow is described over the entire hydrodynamic regime from a time where the peak pressures are 6 Mbar until the stresses everywhere in the flow are linearly elastic, and less than 5 kbar. Shock-induced polymorphic phase changes, (plagioclase and pyroxene to hollandite and perovskite), and the subsequent reversion to low pressure phases are demonstrated to enhance shock wave attenuation. A rate-dependent equation of state is used for describing the hysteretic effect of the phase change. Ballistic equations for a spherical planet are then applied to material with net velocity away from the moon.

Okeefe, J. D.↗
NASA NTRS1976

The NASA-NMSU automated meteor observatory

A new observatory for meteor research which provides data for study of meteor heights, velocities, orbits, and meteoroid abundances is described. The observing equipment is automated to take advantage of the long periods of favorable observing weather common to the region. Four K-24 cameras, electrically operated, provide the triangulation observations, and four Maksutov f/1.3 cameras with blazed transmission grating provide spectral coverage. The patrol cameras have operated for a year and a half, and approximately 6,000 frames have been exposed by 9 March 1975. Meteor trails appear on 260 of these frames. Sixty-eight trails are of meteors photographed from two locations and thus allow trajectory and orbit determinations for 34 meteors. Photoelectric sensors initiate the 2-second spectrograph exposures, and electrical controls open and close the observatory at present times.

Harvey, G. A.↗
NASA NTRS1976

Natural environment design requirements for the Spacelab

The natural environment design requirements for the Spacelab, carried to orbital altitudes as cargo in the space shuttle bay, were presented. This includes consideration of the following: neutral atmosphere, charged particles, radiation (galactic cosmic, trapped, and solar particle events), meteoroids, and astrodynamic constants.

West, G. S.↗
NASA NTRS1975

Lunar shear velocity structure at Apollo sites 12, 14, and 15

Spectral amplitude ratios of horizontal-to-vertical motion produced on seismograms of meteoroid impacts at the Apollo 12, 14, and 15 sites, the Apollo 14 and 15 lunar-module impacts, and the Apollo 15 S4B impact show consistent differences among the recording sites. On the assumption that the motion represents predominantly fundamental-mode Reyleigh waves and that the compressional-wave velocity structure is similar to that derived in other investigations involving the Apollo seismic experiments, estimates are made of the shear-wave velocity structure under the three sites. Near-surface velocities are about 35 m/s at the three sites. The results for site 14 indicate an increase to about 100 m/s near the 8-m depth and to 200 m/s at the 38-m depth. Results for sites 12 and 15 show a smoother gradient and generally a greater velocity at a given depth than that indicated at site 14, reaching velocities of about 400 m/s near the 120-m depth. If the assumed P velocity structures are correct and if changes in S velocity coincide with changes in P velocity, then the ratio of these velocities decreases from 2.9 to 2.0 in the upper 19 meters at site 12, in the upper 38 meters at site 14, and in the upper 21 meters at site 15.

Mark, N.↗
NASA NTRS1975

High temperature condensates among meteors

It is noted that two meteors which exhibited no lines of iron or sodium in their spectra have been tentatively attributed to aubrites in order to explain their lack of iron. It is shown, however, that no meteorites, including aubrites, have simultaneously low abundances of iron and sodium and that possible parent materials other than aubrites must be considered for the observed meteors. Other possible parent materials considered in this letter include melilite and diopside, two minerals containing both Ca and Mg but neither Fe nor Na. It is suggested that meteoroids rich in Ca and Mg but lacking Fe and Na might form a reservoir for the so-called 'lost' elements (Ca, Mg, Al, Ti, the lanthanides, and other refractory elements) which are depleted in ordinary and enstatite chondrites relative to cosmic abundances.

Wilkening, L. L.↗
NASA NTRS1976

The neutral atmospheres of comets

A comprehensive review of current knowledge about the neutral gas atmospheres of comets is given, with emphasis on the task of deriving the chemical composition of the cometary nucleus. The discussion centers on the following major topics: photometric and spectrophotometric observations of the neutral atmosphere and its constituent neutral radicals, molecules, and atoms; excitation processes responsible for the observed emissions from the neutral coma; the parent molecules of the neutral radicals; the gas-phase chemistry likely to take place in the dense inner coma; dynamic models (both exospheric and hydrodynamic) of the neutral atmosphere; and the chemical compositions of comets. The primary conclusions reached on the basis of all the data considered are that: (1) the chemical composition of the dust component is most likely to be the same as that of the stream meteoroids which burn up on hitting the earth's upper atmosphere; (2) the dominant icy component in most comets is probably H2O; and (3) anomalous abundances of other volatile species are present in some comets.

Mendis, D. A.↗
NASA NTRS1976

Lunar microcraters and interplanetary dust fluxes

Conflicting depth/diameter ratios reported for lunar microcrater pits, microcrater pit morphology and size distribution, the composition and structure of pit glasses, and various alternative 'clocks' for estimating exposure time of microcrater pits are examined. Surface exposure time 'clocks' discussed include: galactic cosmic ray tracks, cosmogenic nuclides (involving changes in host rock isotopic composition induced by nuclear reactions), tracks produced in lunar top surfaces by nuclei accelerated during solar flares, and solar wind sputtering. 'Calibration' of the disparate types of surface exposure time 'clocks' with one another is discussed. The sensitive relationship between determinations of meteoroid flux and surface exposure time is examined.

Hartung, J. B.↗
NASA NTRS1976

Radial distribution of meteoric particles in interplanetary space

The heliocentric distribution of meteoric particles in interplanetary space is derived, with consideration of the Poynting-Robertson effect, interparticle collision processes and cometary dust injection. Radial distribution functions were derived for zodiacal dust, radar meteors and the meteoroids of mass 10 to the -9th to about 10 to the -10th g (normalized to 1 AU). The number density was found to depend on particle size.

Rhee, J. W.↗