Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Energy spectrum of Dirac electrons on the surface of a topological insulator modulated by a spiral magnetization superlattice

We investigate the effect of a spiral magnetization superlattice on the surface electronic states of a three-dimensional topological insulator. It is shown that the energy spectrum of this superlattice system has only two Dirac points but many semi-Dirac points. The effective Hamiltonian near those points is expressed in terms of the spiral wave vector and the modulation amplitude. Near semi-Dirac points the band is linear along the spiral direction and quadratic along the transverse direction. There are two types of semi-Dirac points, which are distinguished by the number of parabolic bands passing them.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical calculation of neoclassical distribution functions and current profiles in low collisionality, axisymmetric plasmas

A new code, the Neoclassical Ion-Electron Solver (NIES), has been written to solve for stationary, axisymmetric distribution functions (f) in the conventional banana regime for both ions and electrons using a set of drift-kinetic equations (DKEs) with linearized Fokker-Planck-Landau collision operators. Solvability conditions on the DKEs determine the relevant non-adiabatic pieces of f (called h). We work in a 4D phase space in which {psi} defines a flux surface, {theta} is the poloidal angle, v is the magnitude of the velocity referenced to the mean flow velocity, and {lambda} is the dimensionless magnetic moment parameter. We expand h in finite elements in both v and {lambda}. The Rosenbluth potentials, {Phi} and {Psi}, which define the integral part of the collision operator, are expanded in Legendre series in cos{chi}, where {chi} is the pitch angle, Fourier series in cos{theta}, and finite elements in v. At each {psi}, we solve a block tridiagonal system for h{sub i} (independent of f{sub e}), then solve another block tridiagonal system for h{sub e} (dependent on f{sub i}). We demonstrate that such a formulation can be accurately and efficiently solved. NIES is coupled to the MHD equilibrium code JSOLVER [J. DeLucia et al., J. Comput. Phys. 37, 183-204 (1980)] allowing us to work with realistic magnetic geometries. The bootstrap current is calculated as a simple moment of the distribution function. Results are benchmarked against the Sauter analytic formulas and can be used as a kinetic closure for an MHD code (e.g., M3D-C{sup 1}[S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)]).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deposition of high permeability FeCoN films on mica substrates

In this study, sheet mica was explored as an alternative substrate for thin film deposition due to its unique layered structure and atomically flat surface. Static magnetic properties and microwave permeability of sputtered FeCoN films on mica with and without SiO{sub 2} under-layer were examined. In-plane isotropy and a large coercivity of 70 Oe were observed for the film directly deposited on mica substrate. With the insertion of 40 nm SiO{sub 2} under-layer between the film and mica substrate, well-defined in-plane anisotropy is formed due to the significant reduce in film residual stress, associated with a 3 Oe coercive force along easy axis. As a result, excellent microwave properties have been achieved and are comparable with the same film on Si substrate. Moreover, the permeability spectra are surprisingly stable from room temperature up to 390 K. Mica is proved as a promising substrate for magnetic films with high microwave performance, which is a great advantage for practical applications. Furthermore, our results provide an effective way to reduce the residual stress in sputtered films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Proper motion and timing of two unusual pulsars: Calvera and 1E 1207.4—5209

Using pairs of images from the Chandra High Resolution Camera we examine the proper motion of the central compact object (CCO) 1E 1207.4−5209 in the supernova remnant (SNR) PKS 1209−51/52, and the unusual pulsar Calvera that is possibly a CCO descendant. For 1E 1207.4−5209, an insignificant proper motion of μ=15±7 mas yr{sup −1} is measured, corresponding to a corrected tangential velocity of v{sub ⊥,c}<180 km s{sup −1} at the distance of 2 kpc. This proves that the previously noted large offset of the pulsar from the apparent geometric center of the SNR is not due to high proper motion; evidently the symmetry of the remnant does not indicate its center of expansion. Calvera has a marginally significant proper motion of μ=69±26 mas yr{sup −1}, corresponding to v{sub ⊥,c}=86±33 km s{sup −1} for a hypothetical distance of 0.3 kpc. Notably, its vector is away from the Galactic plane, although its high Galactic latitude of b=+37{sup ∘} may be more a consequence of its proximity than its velocity. We also provide updated timing solutions for each pulsar. Spanning 14.5 years, the ephemeris of 1E 1207.4−5209 has a small and steady frequency derivative that, because of the negligible proper motion, requires no kinematic correction. The derived surface dipole magnetic field strength of 1E 1207.4−5209 thus remains B{sub s}=9.8×10{sup 10} G. Calvera has B{sub s}=4.4×10{sup 11} G, intermediate between those of ordinary young pulsars and CCOs, suggesting that it may be on a trajectory of field growth that could account for the absence of descendants in the neighborhood of CCOs in the P− P-dot diagram.

79 ASTRONOMY AND ASTROPHYSICS↗

TU-H-BRA-05: A System Design for Integration of An Interior MRI and a Linear Accelerator

Purpose: MRI is a highly desirable modality to guide radiation therapy but it is difficult to combine a conventional MRI scanner directly with a linear accelerator (linac). An interior MRI (iMRI) concept has been proposed to acquire MRI images within a small field of view only covering targets and immediate surrounding tissues. The objective of this project is to design an interior MRI system to work with a linac using a magnet to provide a field around 0.2T in a cube of 20cm per side, and perform image reconstruction with a slightly inhomogeneous static magnetic fields. Methods: All the results are simulated using a commercially available software package, FARADY. In our design, a ring structure holds the iMRI system and also imbeds a linac treatment head. The ring is synchronized to the linac gantry rotation. Half of the ring is made of steel and becomes a magnetic flux return path (yoke) so that a strong magnetic field will be limited inside the iron circuit and fringe fields will be very weak. In order to increase the static magnetic field homogeneity, special steel magnet boots or tips were simulated. Three curved boots were designed based on two-dimensional curves: arc, parabola and hyperbola. Results: Different boot surfaces modify magnetic field distributions differently. With the same pair of neodymium-iron-boron (NdFeB) magnets, the magnetic induction at the centers are 0.217T, 0.201T, 0.204T, and 0.212T for flat, arc, parabola and hyperbola boots, respectively. The hyperbola boots lead to the most homogeneous results, the static magnetic field deviations are within 0.5% in a cube of 20cm, and can be further improved using shimming techniques. Conclusion: This study supports the concept of an iMRI design. Successful development of iMRI will provide crucial information for tumor delineation in radiation therapy.

43 PARTICLE ACCELERATORS↗

Energetic particle optimization of quasi-axisymmetric stellarator equilibria

Abstract An important goal of stellarator optimization is to achieve good confinement of energetic particles such as, in the case of a reactor, alphas created by deuterium–tritium fusion. In this work, a fixed-boundary stellarator equilibrium was re-optimized for energetic particle confinement via a two-step process: first, by minimizing deviations from quasi-axisymmetry (QA) on a single flux surface near the mid-radius, and secondly by maintaining this improved QA while minimizing the analytical quantity Γ C , which represents the angle between magnetic flux surfaces and contours of J | | , the second adiabatic invariant. This was performed multiple times, resulting in a group of equilibria with significantly reduced energetic particle losses, as evaluated by Monte Carlo simulations of alpha particles in scaled-up versions of the equilibria. This is the first time that energetic particle losses in a QA stellarator have successfully been reduced by optimizing Γ C . The relationship between energetic particle losses and metrics such as QA error ( E q a ) and Γ C in this set of equilibria were examined via statistical methods and a nearly linear relationship between volume-averaged Γ C and prompt particle losses was found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improvements to an ion orbit loss calculation in the tokamak edge

An existing model of collisionless particle, momentum, and energy ion orbit loss from the edge region of a diverted tokamak plasma has been extended. The extended ion orbit loss calculation now treats losses of both thermal ions and fast neutral beam injection ions and includes realistic flux surface and magnetic field representations, particles returning to the plasma from the scrape off layer, and treatment of x-transport and x-loss. More realistic flux surface geometry allows the intrinsic rotation calculation to predict a peaking in the profile closer to the separatrix, which is consistent with experiment; and particle tracking calculations reveal a new mechanism of “x-transport pumping,” which predicts larger ion losses when coupling conventional ion orbit loss and x-loss mechanisms, though still dominated by conventional ion orbit loss. Finally, sensitivity to these ion orbit loss model enhancements is illustrated by fluid predictions of neoclassical rotation velocities and radial electric field profiles, with and without the enhancements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gaining insight into the $T\,_2^*$– T 2 relationship in surface NMR free-induction decay measurements

One of the primary shortcomings of the surface nuclear magnetic resonance (NMR) freeinduction decay (FID) measurement is the uncertainty surrounding which mechanism controls the signal’s time dependence. Ideally, the FID-estimated relaxation time T$*\atop{2}$ that describes the signal’s decay carries an intimate link to the geometry of the pore space. In this limit the parameter T$*\atop{2}$ is closely linked to a related parameter T 2 , which is more closely linked to pore-geometry. If T$*\atop{2}$ T 2 the FID can provide valuable insight into relative pore-size and can be used to make quantitative permeability estimates. However, given only FID measurements it is difficult to determine whether T$*\atop{2}$ is linked to pore geometry or whether it has been strongly influenced by background magnetic field inhomogeneity. If the link between an observed T$*\atop{2}$ and the underlying T 2 could be further constrained the utility of the standard surface NMR FID measurement would be greatly improved. We hypothesize that an approach employing an updated surface NMR forward model that solves the full Bloch equations with appropriately weighted relaxation terms can be used to help constrain the T$*\atop{2}$ –T 2 relationship. Weighting the relaxation terms requires estimating the poorly constrained parameters T 2 and T 1 ; to deal with this uncertainty we propose to conduct a parameter search involving multiple inversions that employ a suite of forward models each describing a distinct but plausible T$*\atop{2}$ –T 2 relationship. We hypothesize that forward models given poor T 2 estimates will produce poor data fits when using the complex-inversion, while forward models given reliable T 2 estimates will produce satisfactory data fits. By examining the data fits produced by the suite of plausible forward models, the likely T$*\atop{2}$ –T 2 can be constrained by identifying the range of T 2 estimates that produce reliable data fits. Synthetic and field results are presented to investigate the feasibility of the proposed technique.

58 GEOSCIENCES↗

On the phase relationship between the energetic particle flux modulation and current disc penetrations in the Jovian magnetosphere - Pioneer 10 inbound

The surface defined by the locus of field minima along field lines for an unterminated Jovian model magnetosphere is found to coincide with the surface of the model current disk which provides a good fit to the data. However, when the model is terminated by means of magnetopause currents, preservation of the fit by modifying the current distribution near the outer edge of the disk causes the minimum absolute magnetic field surface to bifurcate. Energetic electron flux time profiles that are based upon such a minimum absolute magnetic field configuration are found to be qualitatively consistent with the inbound Pioneer 10 data.

Jones, D. E.↗

Energetics and magnetism of Co-doped GaN(0001) surfaces: A first-principles study

A comprehensive first-principles study of the energetics, electronic, and magnetic properties of Co-doped GaN(0001) thin films are presented and the effect of surface structure on the magnetic coupling between Co atoms is demonstrated. It is found that Co atoms prefer to substitute the surface Ga sites in different growth conditions. In particular, a CoN/GaN interface structure with Co atoms replacing the first Ga layer is preferred under N-rich and moderately Ga-rich conditions, while CoGa{sub x}/GaN interface is found to be energetically stable under extremely Ga-rich conditions. It is worth noted that the antiferromagnetic coupling between Co atoms is favorable in clean GaN(0001) surface, but the existence of ferromagnetism would be expected to occur as Co concentration increased in Ga-bilayer GaN(0001) surface. Our study provides the theoretical understanding for experimental research on Co-doped GaN films and might promise the Co:GaN system potential applications in spin injection devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FY2018 Fusion Theory and Simulation Milestone on Plasma Materials Interaction (PMI) (Final Report)

The interaction of the boundary plasma with the material surfaces in magnetically confined plasmas is among the most critical problems in fusion energy science. In FY2018, perform high performance computing simulations with coupled boundary plasma physics and materials surface models to predict the fuel recycling and tritium retention of the ITER divertor for D-T burning plasma conditions, accounting for erosion, re-deposition and impurity transport in the plasma boundary, and an initial evaluation of the influence of material deposition on the recycling and retention.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An Integrated Assessment of a G3 GMD Event on Large-Scale Power Grids: From Magnetometer Data to Geomagnetically Induced Current Analysis

Solar activities can cause geomagnetic disturbances (GMDs) that give rise to geomagnetically induced currents (GICs) which may compromise the reliability of the power system. In order to build more reliable models representing GMD interactions with the power grid, the power system’s detailed electrical model must be considered along with fluctuations in the earth’s magnetic and induced surface electric fields. Here, this study investigates the impact of incorporating spatially varying magnetic fields into surface electric field models on GMD risk metrics. A spatially independent magnetic field model and a spatially varying model are compared through simulations. To perform this analysis, the earth’s magnetic field disturbances are transformed into surface electric fields using respective one-dimensional earth conductivity models. Then, the modeling impact of these electric fields is studied using a 2,000-bus grid for Texas and a 25,000-bus grid for the northeast and mid- Atlantic regions of the United States. Simulation results reveal that the inclusion of spatially varying magnetic fields results in considerable differences in GMD risk metrics, highlighting the importance of accounting for spatial variability when assessing GMD risks in the power system.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Pseudogap and Fermi arc induced by Fermi surface nesting in a centrosymmetric skyrmion magnet

Skyrmions in noncentrosymmetric materials are believed to occur due to the Dzyaloshinskii-Moriya interaction. By contrast, the skyrmion formation mechanism in centrosymmetric materials remains elusive. Here, in this work, we reveal the intrinsic electronic structure of the centrosymmetric GdRu 2 Si 2 by selectively measuring magnetic domains using angle-resolved photoemission spectroscopy (ARPES). We found robust Fermi surface (FS) nesting, consistent with the magnetic modulation q -vector detected by the previous resonant x-ray scattering measurements. The pseudogap opens at the nested FS portions, which vary for different magnetic domains. The anomalous pseudogap disconnects the FS to generate Fermi arcs with twofold symmetry. These results indicate that the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction plays a decisive role in generating the screw spin modulation responsible for the skyrmion formation in GdRu 2 Si 2 . Furthermore, we demonstrate the flexible nature of magnetism in GdRu 2 Si 2 by manipulating magnetic domains with magnetic field and temperature cyclings, providing potential future applications for data storage and processing devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A matching problem revisited for stability analysis of resistive wall modes in flowing plasmas

The classical matching problem for magnetohydrodynamic stability analysis is revisited to study effects of the plasma flow on the resistive wall modes (RWMs). The Newcomb equation, which describes the marginal states and governs the regions except for the resonant surface, is generalized to analyze the stability of flowing plasmas. When there exists no flow, the singular point of the Newcomb equation and the resonant surface degenerate into the rational surface. The location of the rational surface is prescribed by the equilibrium, hence the inner layer, which must contain the resonant surface, can be set a priori. When the flow exists, the singular point of the Newcomb equation splits in two due to the Doppler shift. Additionally, the resonant surface deviates from the singular points and the rational surface if the resonant eigenmode has a real frequency. Since the location of the resonant surface depends on the unknown real frequency, it can be determined only a posteriori. Hence the classical asymptotic matching method cannot be applied. This paper shows that a new matching method that generalizes the asymptotic one to use the inner layer with finite width works well for the stability analysis of flowing plasmas. If the real frequency is limited in a certain range such as the RWM case, the resonance occurs somewhere in the finite region around the singular points, hence the inner layer with finite width can capture the resonant surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Nature of Light Transmission through a 5-nm Gap

Slot antennas have been exploited as important building blocks of optical magnetism because their radiations are invoked by the magnetic fields along the axes, as vectorial Babinet principle predicts. However, optical magnetism of a few-nanometer-width slit, for which fascinating applications are found due to the colossal field enhancement but Babinet principle fails due to the nonnegligible thickness, has not been investigated. In this paper, we demonstrated that the magnetic field plays a dominant role in light transmission through a 5-nm slit on a 150-nm-thick gold film. The 5-nm slit was fabricated by atomic layer lithography, and the transmission was investigated for various incident angles by experiment and simulation at 785-nm wavelength. We found that, due to the deep subwavelength gap width, the transmission has the same incident angle dependence as the tangential magnetic field on the metal surface and this magnetic nature of a nanogap holds up to ~100-nm width. Our analysis establishes conditions for nanogap optical magnetism and suggests new possibilities in realizing magnetic-field-driven optical nonlinearities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The internal disruption as hard Magnetohydrodynamic limit of 1/2 sawtooth like activity in large helical device

Large helical device (LHD) inward-shifted configurations are unstable to resistive MHD pressure-gradient-driven modes. Sawtooth like activity was observed during LHD operation. The main drivers are the unstable modes 1/2 and 1/3 in the middle and inner plasma region which limit the plasma confinement efficiency of LHD advanced operation scenarios. The aim of the present research is to study the hard MHD limit of 1/2 sawtooth like activity, not observed yet in LHD operation, and to predict its effects on the device performance. Previous investigations pointed out this system relaxation can be an internal disruption [J. Varela et al., 'Internal disruptions and sawtooth like activity in LHD,' 38th EPS Conference on Plasma Physics (2011), P5.077]. In the present work, we simulate an internal disruption; we study the equilibria properties before and after the disruptive process, its effects on the plasma confinement efficiency during each disruptive phase, the relation between the n/m = 1/2 hard MHD events and the soft MHD events, and how to avoid or reduce their adverse effects. The simulation conclusions point out that the large stochastic region in the middle plasma strongly deforms and tears the flux surfaces when the pressure gradient increases above the hard MHD limit. If the instability reaches the inner plasma, the iota profiles will be perturbed near the plasma core and three magnetic islands can appear near the magnetic axis. If the instability is strong enough to link the stochastic regions in the middle plasma (around the half minor radius {rho}) and the plasma core ({rho}<0.25), an internal disruption is driven.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic torque measurements in DIII-D using internal/external magnetic field decomposition

Given spatially resolved measurements of normal and tangential components of the magnetic field just outside the surface of a magnetically confined plasma, the field at the measurement location can be uniquely decomposed into contributions from the plasma and from external sources. This principle allows direct measurement of the electromagnetic torque on the plasma without knowledge of the distribution of the internal and external currents, similar to the more well-known formalism using the Maxwell stress tensor. The internal/external field decomposition also enables a mixed approach that incorporates any explicitly known current distributions (e.g., from non-axisymmetric coils). We discuss the requirements and limitations of such an approach to torque measurements. Experimental measurements of the torque evolution as a rotating tearing mode locks to the wall in the DIII-D tokamak are consistent with a simple model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗