Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Scaffolds of magnetically active 3d metals in the valence electron controlled borides Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr–Ni; x=0.5–1): Structutral, electronic and magnetic properties

Polycrystalline samples of the boride series Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr, Co, Mn, Ni) including single crystals of Ti{sub 8}Co{sub 3}Ru{sub 18}B{sub 8} have been prepared by arc-melting the elements. The phases were characterized by powder X-ray diffraction (Rietveld refinement), single-crystal X-ray diffraction (for M=Co), and energy-dispersive X-ray (EDX) analysis. They are substitutional variants of the Zn{sub 11}Rh{sub 18}B{sub 8} structure type, space group P4/mbm (No. 127) and contain a “scaffold” structural unit (M-ladders interacting with M/Ti-chains) as well as isolated M/Ti-chains. According to DFT calculations, the Ru–X (X=B, Ti, Ti/M) bonding interactions are nearly constant throughout the series and responsible for the structural stability of these phases, whereas the M–M and Ru–M interactions vary significantly with varying valence electron count. Furthermore, density of states (DOS) analyses predict the phases with M=Mn and Ni to develop a total magnetic moment but not the M=Co phase. Susceptibility measurements confirm the Co phase to be paramagnetic and the Mn Phase orders ferrimagnetically below 120 K and thus develops a magnetic moment, as predicted. - Graphical abstract: The crystal structures of the new phases (M=Cr, Mn, Co, Ni) are confirmed by Rietveld refinement of powder diffraction data and single crystal X-ray diffraction (for M=Co) to contain beside the M-ladder also M/Ti-chains. Similar to the series Ti{sub 9}M{sub 2}Ru{sub 18}B{sub 8}, the crystal structure of the new phases are mainly stabilized by the heteroatomic Ru–B and Ru–Ti bonds that remain nearly constant throughout the series, whereas the M-containing bonds vary significantly with varying valence electron count. An experimental finding confirmed and even extended by COHP bonding analyses. In addition, the DOS analyses of the M-elements reveal the development of magnetic moments for the M=Mn, Ni cases but not for M=Co. Indeed, Ti{sub 8}Co{sub 3}Ru{sub 18}B{sub 8} was found experimentally to be a paramagnet and ferrimagnetic ordering below 120 K is found for M=Mn. Highlights: • Synthesis of the valence electron controlled borides Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr–Ni). • Prediction of magnetic properties of Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8}. • Ferrimagnetic ordering found in Ti{sub 8}M{sub 3}Ru{sub 18}B{sub 8}. • Chemical bonding studied by density functional theory.

36 MATERIALS SCIENCE↗

Interface depended electronic and magnetic properties of vertical CrI 3 /WSe 2 heterostructures

Owing to the great potential applications in information processing and storage, two-dimensional (2D) magnetic materials have recently attracted significant attention. Here, using first-principles calculations, we investigate the electronic and magnetic properties of the van der Waals CrI 3 /WSe 2 heterostructures. We find that after forming heterostructures, monolayer CrI 3 undergoes a direct to indirect band gap transition and its gap size is greatly reduced. In particular, the out-plane spin quantization axis of monolayer CrI 3 is tuned into in-plane for most stacking configurations of CrI 3 /WSe 2 . We further reveal that the transition of the easy magnetization direction is mainly originated from the hybridization between Cr-d and Se-p orbitals. These theoretical results provide a useful picture for the electronic structure and magnetic anisotropy behaviors in vertical CrI 3 /WSe 2 heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and Hard Magnetic Properties of Sm 1-x Zr x (Fe,Co) 11.3-y Ti 0.7 By Ingots and Thick Melt-Spun Ribbons

Permanent magnets made from Sm(Fe,Co) 12 -based compounds are being actively pursued through nanostructuring and powder metallurgy. This study was aimed at the development of hard magnetic properties in bulk as-cast alloys and in melt-spun alloys for very low wheel speeds. Slower solidification rates and alloying with Zr promote the tetragonal ThMn 12 -type crystal structure, whereas higher solidification rates and alloying with B replace the ThMn 12 structure type with the TbCu 7 structure type. When introduced simultaneously, Zr and B dramatically reduce the alloy solidification rates required for both the refinement of the 1:12 crystallites and their replacement with the 1:7 phase. In bulk arc-melted alloys, this allowed for a microstructure of separated 1:12 crystallites 1–3 μm in size, although, because of the ferromagnetic nature of a minority phase, the coercivity of these fine-grained alloys reached only 0.73 kOe. A moderately accelerated solidification further refined the 1:12 crystallites and increased the coercivity; a Sm 0.7 Zr 0.4 (Fe,Co) 10.8 Ti 0.7 B 0.5 alloy exhibited a coercivity of 1.5 kOe and a maximum energy product of 3.4 MGOe when it was melt-spun into a 0.26-mm-thick ribbon. A more rapid solidification suppressed the 1:12 phase and after annealing at 800–850 °C, the alloys modified with Zr and B developed reasonably high coercivity and maximum energy product even when melt-spun at a wheel speed of 6 m/s. For the above-mentioned alloy, these values were 4.1 kOe and 7.8 MGOe, respectively. Further, a similarly processed very-Sm-lean Sm 0.5 Zr 0.6 (Fe,Co) 10.6 Ti 0.7 B 0.7 alloy exhibited a remanence of 8.8 kG and an energy product of 7.4 MGOe.

36 MATERIALS SCIENCE↗

Crystal Field Effects on Magnetic Properties of a Mixed Ferrimagnetic Ising System: a Monte Carlo Study

The effects of two different single-ion anisotropies on the magnetization of the mixed (7/2, 5/2) Ising ferrimagnetic system on a square lattice are investigated by the use of Monte Carlo simulation. The ground-state phase diagram is obtained. Compensation points are detected for certain values of the crystal fields. Different types of magnetization curves are available.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ga-concentration on the electrical and magnetic properties of magnetoelectric CoGa x Fe 2–x O 4 /BaTiO 3 composite

Multiferroic materials exhibit magnetoelectric (ME) coupling and promise new device applications including magnetic sensors, generators, and filters. An effective method for developing ME materials with enhanced ME effect is achieved by the coupling through the interfacial strain between piezoelectric and magnetostrictive materials. In this study, the electrical and magnetic properties of Ga doped magnetoelectric CoGa x Fe 2–x O 4 /BaTiO 3 composite are studied systematically. It is found that Ga doping improves the sensitivity of magnetoelastic response and stabilizes the magnetic phase of the composites. More importantly, Ga doping reduces the electrical conductivity of composite, as well as the dielectric loss. An enhancement of the electrostrain with doping Ga is also observed. Quantitative estimation indicates that magnetoelectric coupling is enhanced for Ga-doped CoGa x Fe 2–x O 4 /BaTiO 3 composites. As a result, the present work is beneficial to the practical application of composite CoFe 2 O 4 /BaTiO 3 -based multiferroic materials.

36 MATERIALS SCIENCE↗

Coligand-regulated assembly, fluorescence, and magnetic properties of Co(II) and Cd(II) complexes with a non-coplanar dicarboxylate

A non-coplanar dicarboxylate ndca (H{sub 2}ndca=5-norbornene-2,3-dicarboxylic acid), combining with various dipyridyl-typed tectons, constructs six Cd(II)/Co(II) coordination polymers under hydrothermal conditions, namely [Co(ndca)(H{sub 2}O)]{sub n} (1), ([Co(ndca)(bpe)(H{sub 2}O)]·H{sub 2}O){sub n} (2), [Co(ndca)(bpa){sub 0.5}(H{sub 2}O)]{sub n} (3), [Cd(ndca)(bpe)(H{sub 2}O)]{sub n} (4), ([Cd(ndca)(bpa)(H{sub 2}O)]·0.5H{sub 2}O){sub n} (5), and ([Cd(ndca)(bpp) (H{sub 2}O)]·H{sub 2}O){sub n} (6) (bpe=1,2-di(4-pyridyl)ethylene, bpa=1,2-bi(4-pyridyl)ethane, and bpp=1,3-bis(4-pyridyl)propane). All these compounds contain various metal(II)–carboxylate motifs, including carboxylate binuclear (2, 4, 5), carboxylate chain (1, 6) and carboxylate layer (3), which are further extended by dipyridyl-typed coligands to afford a vast diversity of the structures with 2D pyknotic layers (1, 6), 2D open layer (5), 2D→3D interpenetrated networks (2,4), and 3D pillared-layer framework (3), respectively. In addition, fluorescent spectra of Cd(II) complexes and magnetic properties of Co(II) complexes are also given. - Graphical abstract: Six various cadmium(II)/cobalt(II)–organic frameworks were constructed by 5-norbornene-2,3-dicarboxylic acid and different bis(pyridine) rod-like tectons, and Cd (II) complexes exhibit blue–violet emissions, whereas Co (II) complexes show antiferromagnetic behaviours. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structures and magnetic properties of lanthanide containing borates LnM(BO{sub 3}){sub 2} (Ln=Y, Ho–Lu; M=Sc, Cr)

The synthesis, crystal structures and magnetic properties of LnM(BO{sub 3}){sub 2} (Ln=Y, Ho–Lu; M=Sc, Cr) were investigated. The LnCr(BO{sub 3}){sub 2} compounds crystallize in the dolomite-type structure with space group R3{sup ¯}, in which the Ln and Cr ions occupy two octahedral sites. From the result of structural analysis, it was found that there is an anti-site disorder between these two sites and its chemical formula is more exactly Ln{sub 1−r}Cr{sub r}[Cr{sub 1−r}Ln{sub r}](BO{sub 3}){sub 2}. On the other hand, the LnSc(BO{sub 3}){sub 2} adopt the calcite-type structure with space group R3{sup ¯}c. The Ln and Sc ions randomly occupy an octahedral site and the chemical formula is represented as (Ln{sub 0.5}Sc{sub 0.5})BO{sub 3}. From the magnetic susceptibility and specific heat measurements, we found that all the LnCr(BO{sub 3}){sub 2} show an antiferromagnetic transition at 6.1–8.1 K. This transition is mainly due to the ordering of Cr{sup 3+} magnetic moments. Among the compounds with magnetic Ln{sup 3+} ions, only YbCr(BO{sub 3}){sub 2} shows an antiferromagnetic ordering of Ln{sup 3+} ion at 2.1 K. - Graphical abstract: The lanthanide containing borates LnM(BO{sub 3}){sub 2} (Ln=Y, Ho–Lu; M=Sc, Cr) have the dolomite-type (Ln=Cr) and calcite-type (Ln=Sc) structures. Both structures are similar to each other except for the difference in the partially or fully disordered arrangements of octahedral sites. At low temperatures, the LnCr(BO{sub 3}){sub 2} compounds show an antiferromagnetic transition due to a long-range ordering of Cr{sup 3+} moments. Among them only YbCr(BO{sub 3}){sub 2} shows an antiferromagnetic ordering of Ln{sup 3+} ion at 2.1 K. Display Omitted - Highlights: • Lanthanide containing borates LnM(BO{sub 3}){sub 2} (Ln=Y, Ho–Lu; M=Sc, Cr) have been synthesized. • LnCr(BO{sub 3}){sub 2} has the dolomite-type structure with an anti-site disorder between Ln and Cr sites. • LnSc(BO{sub 3}){sub 2} has the calcite-type structure in which the Ln and Cr randomly occupy the same site. • LnCr(BO{sub 3}){sub 2} shows an antiferromagnetic transition at 6.1–8.1 K due to the long-range magnetic ordering of Cr{sup 3+} moments. • Only YbCr(BO{sub 3}){sub 2} shows the two-step antiferromagnetic ordering: Cr{sup 3+} (6.1 K) and Yb{sup 3+} (2.1 K)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations of surface structural, dynamical, and magnetic properties of systems exhibiting multiferroicity, and topological phases by helium scattering spectroscopies (Final Report)

We propose to investigate the surface structural, dynamics and magnetic properties of the novel class of topological insulator crystals, as well as crystals that exhibit multiferroicity, magnetoelectricity and thermoelectricity. Topological insulators (TIs) are a new class of insulators in which a bulk gap for electronic excitations is generated because of the strong spin-orbit coupling inherent to these systems. These materials are distinguished from ordinary insulators by the presence of gapless metallic surface states, resembling chiral edge modes in quantum Hall systems, but with unconventional spin textures. These exotic metallic states are formed by topological conditions that also render the electrons travelling on such surfaces insensitive to scattering by impurities. The electronic quasi-particles populating the topological surface state are Dirac fermions; they have a linear dispersion and thus are massless just like photons. We propose to investigate the interaction of these massless Dirac fermions with the massive lattice in the newly discovered crystals, Bi 2 Se 3 , Bi 2 Te 3 and Sb 2 Te 3 . We shall use inelastic helium beam scattering from surfaces to search for related signatures in surface phonon dispersions mappings that cover the entire surface Brillouin zone of these materials. Our recent investigations of the (001) surface of the multiferroic crystals (Li/Na)Cu 2 O 2 revealed an anomalous surface structural behavior where surface Cu$^{2+}$ row rise above the surface plane as the crystal was cooled. Subsequent worming revealed the onset of a thermally activated incommensurate surface phase, driven by the elevated rows. We are currently investigating the structure of the magnetic phases in these quasi-one-dimensional magnetic rows. Multiferroics are excellent candidates for large magnetoelectric response. We propose to extend this investigation to the class of delafossites which are also multiferroics and have been investigated as good candidates for thermoelectric power devices. They are also typical triangular lattice antiferromagnets with geometric magnetic frustration that leads to helimagnetic structures.

36 MATERIALS SCIENCE↗

Anomalous magnetic properties of CaRuO3 probed by AC and DC magnetic measurements and by low Ti impurity doping

Calcium ruthenate (CaRuO3) is widely believed to be located close to a quantum critical point due to the strong non-Fermi-liquid behavior expressed in the temperature dependence of electronic transport, specific heat, optical conductivity, etc. However, the corresponding anomalous behavior, marking crossover temperature regimes in the magnetic response of CaRuO3, is still lacking. Here we report detailed AC and DC magnetic susceptibility measurements of CaRuO3 and CaR u0.97 Ti 0.03 O3. The AC magnetic susceptibility measurements of CaRuO3 show a slight dependence on the frequency of AC magnetic field below ∼40K, and an additional subtle change of curvature around 12 K. We interpret these results as a critical slowing down of spin fluctuations towards T = 0 K. We confirm these observations by magnetic measurements of CaRu0.97 Ti 0.03 O3, which show a pronounced magnetic response corresponding to the above temperatures.

60 APPLIED LIFE SCIENCES↗

Structural and magnetic properties of the CeCo 5 –CeZn 5 solid solution and potential improvements upon iron substitution

In an effort to create high-performance permanent magnets with reduced critical rare earth content, we explored the CeCo 5-x T x (T = transition metal or metalloid) family of compounds to investigate the effect of substitution on the material’s magnetic properties. In our exploration of the CeCo 5-x Zn x system, we discovered a continuous solid solution at 900 °C between the CeCo 5 and CeZn 5 binary phases with ferromagnetism existing from the CeCo 5 compound to the intermediate CeCo 2.75 Zn 2.25 compound. Single crystal studies were also conducted revealing a relatively large anisotropy field of 11.5 T at 300 K for Ce 0.96 Ta 0.04 Co 4.35 Zn 0.65 . Here, the addition of iron Ce 0.79 Ta 0.07 Co 3.77 Fe 0.89 Zn 0.47 yielded further increases in Curie temperature and saturation magnetization to 800 K and 85.5 emu/g, respectively.

36 MATERIALS SCIENCE↗

Syntheses, characterization and magnetic properties of two novel inorganic-organic tungstoferrites, [Fe{sup III}{sub 4}(H{sub 2}O){sub 2}(B-{alpha}-Fe{sup III}W{sub 9}O{sub 34}){sub 2}]{sup 10-}

Interaction of the lacunary [{alpha}-SbW{sub 9}O{sub 33}]{sup 9-} with Fe{sup 3+} in the presence of organic amines under hydrothermal conditions yields two novel inorganic-organic hybrid tungstoferrites [dapH{sub 2}]{sub 3}[enH{sub 2}][enH]Na[Fe{sub 4}(H{sub 2}O){sub 2}(FeW{sub 9}O{sub 34}){sub 2}]{center_dot}7H{sub 2}O (dap=1,2-diaminopropane, en=ethylenediamine) (1) and [dapH{sub 2}]{sub 5}[Fe{sub 4}(H{sub 2}O){sub 2}(FeW{sub 9}O{sub 34}){sub 2}]{center_dot}11H{sub 2}O (2), which have been characterized by IR, elemental analysis, UV-Vis, TG and single-crystal X-ray diffraction. Both 1 and 2 consist of two [B-{alpha}-Fe{sup III}W{sub 9}O{sub 34}]{sup 11-} units joined by a rhomb-like tetranuclear iron cluster. Interestingly, 1 displays a new example of 1D chain-like architecture, in which adjacent [Fe{sub 4}(FeW{sub 9}O{sub 34}){sub 2}]{sup 10-} anions are interconnected by two unusual W-O-Fe bridges. Meanwhile, the neighboring chains are further assembled by Na{sup +} ions, forming the 2D extended network. 2 exhibits a discrete dimeric TMSP structure constructed from two trivacant [B-{alpha}-Fe{sup III}W{sub 9}O{sub 34}]{sup 11-} subunits encapsulating a rhomb-like tetranuclear iron cluster with five isolated diprotoned dap molecules. Magnetic measurements indicate that antiferromagnetic exchange interactions are dominant in the hexanuclear {l_brace}Fe{sub 6}O{sub 22}{r_brace} clusters in 1 and 2. - Graphical abstract: Two novel inorganic-organic hybrid tungstoferrites were synthesized from the reaction of lacunary [{alpha}-SbW{sub 9}O{sub 33}]{sup 9-} with Fe{sup 3+} under hydrothermal conditions and structurally characterized. The magnetic properties of them were also studied. Highlights: Black-Right-Pointing-Pointer 1 represents the first example of 1D chain-like {l_brace}Fe{sub 4}(FeW{sub 9}){sub 2}{r_brace} tungstoferrite. Black-Right-Pointing-Pointer Two [B-{alpha}-Fe{sup III}W{sub 9}O{sub 34}]{sup 11-} units linked via a rhomb-like tetranuclear iron cluster. Black-Right-Pointing-Pointer Adjacent {l_brace}Fe{sub 4}(FeW{sub 9}){sub 2}{r_brace} are interconnected by unusual W--O--Fe bridges. Black-Right-Pointing-Pointer Antiferromagnetic exchange interactions are dominant in the {l_brace}Fe{sub 6}O{sub 22}{r_brace} cluster.

36 MATERIALS SCIENCE↗

Magnetic properties of MnBi based alloys: First-principles calculations for MnBi-Co and MnBi-Co-Fe cases

First-principles calculations of fundamental magnetic properties were performed for ordered MnBi, MnBi-Co, and MnBi-Co-Fe alloys to evaluate maximum energy product (BH)(max). Full potential linear-augmented plane wave (FLAPW) and linear-muffin-tin-orbital (LMTO) calculations using density functional theory (DFT) within the local spin density approximation (LSDA) were used and found to give a reasonable description of saturation magnetization (M-s), effective anisotropy constant (K-eff), and Curie temperature (T-c) for NiAs-structured MnBi crystal. We found that upon addition of Co, the M-s and K-eff increased, while T-c reduced. The magnetic anisotropy changed from weak anisotropy easy plane for MnBi to the strong easy axis anisotropy for MnBi-Co and MnBi-Co-Fe. (C) 2013 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.

Hong, YK↗

Ab Initio Study of Electronic and Magnetic Properties in ZnO-Doped and Co-doped by Vanadium and Silver

Based upon the ab initio of spin density functional calculation, the electronic and magnetic properties of Zn{sub 1−x}M{sub x}O (M = Ag or V) and Zn{sub 1−x−y}A{sub x}B{sub y}O (A = V; B = Ag) are investigated, using the Korringa-Kohn-Rostoker (KKR) method coupled with the coherent potential approximation (CPA). The total and partial densities of state are calculated. The effect of concentration values in Zn{sub 1−x}V{sub x}O and Zn{sub 1−x−y}V{sub x}Ag{sub y}O are deduced. Moreover, the magnetic disorder local moment (DLM) and the total energy are obtained for different concentration values of doped and co-doped zinc oxide (ZnO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The application of macroscopic flakes for Fe-6.5%Si bulk magnetics with superior magnetic properties

Inductors are used in power electronics to convert current to different frequency and voltage. They are used extensively from where power is generated all the way to electric vehicles and portable electronic devices. The soft magnetic materials used in the inductors is critical for the performance of the inductors. Currently, a majority of the inductor uses powder core. The use of powder is not ideal as the 3D granule powders generate large demagnetization field working against the applied field, resulting in reduced permeability and efficiency. In this paper, 2D flakes were used to replace the 3D granules as the feedstock for fabricating inductor core. The crystalline Fe-Si based crystalline soft magnetic material in the form of flakes approximately 0.1mm thick, 1mm long and 2mm wide were prepared via melt spinning. The flakes were then coated with insulating materials before compacted into a toroid. The effect of coating thickness and concentration on magnetic properties of the toroidal sample are studied. It was also found that the magnetic cores made by flakes surpass the cores made by same size powder with larger permeability and lower iron losses.

Fe-6.5%Si Steel↗

Magnetic properties of lithium zinc ferrites synthesized by microwave sintered method

In this paper, a series of polycrystalline ferrite samples were prepared with the composition of Zn{sub 0.1}Li{sub 0.525-x}Ti{sub 0.15}Mg{sub x}Fe{sub 2.225-0.5x}O{sub 4} (LiZn) (x=0, 0.05, 0.10, 0.15 and 0.20) using both microwave sintering (MS) and conventional sintering (CS) technologies, respectively. The sintering time and temperature were 22 hours and 1000°C for the CS process, and 2 hours and 880°C for the MS process. Experiments showed that the MS treated LiZn ferrites exhibited more excellent magnetic properties and denser, more uniform micro-structures comparing with the ones treated by CS method. For the LiZn ferrite (x=0.1) sintered at 880°C using MS, the saturation magnetic induction (Bs) is 242.3 mT, the coercive force (Hc) is 135 A/m, the square ratio (Br/Bs) is 0.87 and the ferromagnetic resonance line-width (Δ H) is 143.2 Oe. These results represented very good properties for an X-band phase shifter material and indicated that the MS method is a potentially important technique for fabricating low temperature co-fired ceramics (LTCC).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Static and dynamic magnetic properties of the spiin-$\frac{5}{2}$triangle lattice antiferromagnet Na 3 Fe(PO 4 ) 2 studied by 31 P NMR

We report 31 P nuclear magnetic resonance (NMR) measurements have been carried out to investigate the magnetic properties and spin dynamics of Fe 3+ (S = 5/2) spins in the two-dimensional triangular lattice (TL) compound Na 3 Fe(PO 4 ) 2 . The temperature (T) dependence of nuclear spin-lattice relaxation rates (1/T 1 ) shows a clear peak around Néel temperature, T N = 10.9 K, corresponding to an antiferromagnetic (AFM) transition. From the temperature dependence of NMR shift (K) above T N , an exchange coupling between Fe 3+ spins was estimated to be J/k B ≃ 1.9 K using the spin-5/2 Heisenberg isotropic-TL model. The temperature dependence of 1/T 1 T divided by the magnetic susceptibility (χ), 1/T 1 T χ , above T N proves the AFM nature of spin fluctuations below ~50 K in the paramagnetic state. In the magnetically ordered state below T N , the characteristic rectangular shape of the NMR spectra is observed, indicative of a commensurate AFM state in its ground state. The strong temperature dependence of 1/T 1 in the AFM state is well explained by the two-magnon (Raman) process of the spin waves in a 3D antiferromagnet with a spin-anisotropy energy gap of 5.7 K. The temperature dependence of sublattice magnetization is also well reproduced by the spin waves. Those results indicate that the magnetically ordered state of Na 3 Fe(PO 4 ) 2 is a conventional 3D AFM state, and no obvious spin frustration effects were detected in its ground state

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric and magnetic properties of some gadolinium silica nanoceramics

Some nanostructure gadolinium silica glass-ceramics were obtained undergoing a sol gel method and a heat-treatment at 1000°C about two hours. The magnetic and dielectric properties of these samples were studied. The magnetic properties were evidenced performing susceptibility measurements in the 80-300K temperature range. A Curie-Weiss behavior has acquired. The values estimated for paramagnetic Curie temperature being small and positive suggest the presence of weak ferromagnetic interactions between Gd{sup 3+} ions. The dielectric properties were evaluated from dielectric permittivity (ε{sub r}) and dielectric loss (tanδ) measurements at the frequency 1 kHz, 10 kHz and 100 kHz, in the 25-225°C temperature range and dielectric dispersion at room temperature for 79.5 kHz - 1GHz frequency area. The dielectric properties suggest that the main polarization mechanism corresponds to interfacial polarization, characteristic for polycrystalline-structured dielectrics. The polycrystalline structure of the samples is due to the polymorphous transformations of the nanostructure silica crystallites in the presence of gadolinium oxide. They were highlighted by SEM micrographs.

36 MATERIALS SCIENCE↗