Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Beta (β) tungsten thin films: Structure, electron transport, and giant spin Hall effect

We use a simple magnetron sputtering process to fabricate beta (β) tungsten thin films, which are capable of generating giant spin Hall effect. As-deposited thin films are always in the metastable β-W phase from 3.0 to 26.7 nm. The β-W phase remains intact below a critical thickness of 22.1 nm even after magnetic thermal annealing at 280 °C, which is required to induce perpendicular magnetic anisotropy (PMA) in a layered structure of β-W/Co{sub 40}Fe{sub 40}B{sub 20}/MgO. Intensive annealing transforms the thicker films (>22.1 nm) into the stable α-W phase. We analyze the structure and grain size of both β- and α-W thin films. Electron transport in terms of resistivity and normal Hall effect is studied over a broad temperature range of 10 K to at least 300 K on all samples. Very low switching current densities are achieved in β-W/Co{sub 40}Fe{sub 40}B{sub 20}/MgO with PMA. These basic properties reveal useful behaviors in β-W thin films, making them technologically promising for spintronic magnetic random access memories and spin-logic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct correlation and strong reduction of native point defects and microwave dielectric loss in air-annealed (Ba,Sr)TiO{sub 3}

We report on the native defect and microwave properties of 1 μm thick Ba{sub 0.50}Sr{sub 0.50}TiO{sub 3} (BST) films grown on MgO (100) substrates by molecular beam epitaxy (MBE). Depth-resolved cathodoluminescence spectroscopy (DRCLS) showed high densities of native point defects in as-deposited BST films, causing strong subgap emission between 2.0 eV and 3.0 eV due to mixed cation V{sub C} and oxygen Vo vacancies. Post growth air anneals reduce these defects with 2.2, 2.65, and 3.0 eV V{sub O} and 2.4 eV V{sub C} intensities decreasing with increasing anneal temperature and by nearly two orders of magnitude after 950 °C annealing. These low-defect annealed BST films exhibited high quality microwave properties, including room temperature interdigitated capacitor tunability of 13% under an electric bias of 40 V and tan δ of 0.002 at 10 GHz and 40 V bias. The results provide a feasible route to grow high quality BST films by MBE through post-air annealing guided by DRCLS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced luminescence in Mg{sup 2+} codoped CaTiO{sub 3}:Eu{sup 3+} phosphor prepared by solid state reaction

CaTiO{sub 3} phosphors doped with Eu{sup 3+} and codoped with Mg{sup 2+} were prepared by Solid State Reaction method. The powders were characterized by X-ray diffraction, SEM with EDS, Raman scattering, and photoluminescence spectroscopy. The Crystalline phase and vibrational modes of the phosphors were studied using XRD pattern and Raman Spectrum respectively. The morphological studies of the phosphor samples were carried out using SEM analysis. From PL spectra we have observed two prominent red emission peaks around at 595 nm ({sup 5}D{sub 0}→{sup 7}F{sub 1}), 619 nm ({sup 5}D{sub 0}→{sup 7}F{sub 2}) with the excitation of 399 nm for Eu{sup 3+} doped CaTiO{sub 3} powders. The PL intensity of CaTiO{sub 3}:Eu{sup 3+} phosphor is enhanced significantly on codoping with Mg{sup 2+}. The observed enhanced emissions are due to energy transfer from Mg{sup 2+} to Eu{sup 3+}, which is due to radiative recombination. Eu{sup 3+} doped phosphors are well known to be promising materials for electroluminescent devices, optical amplifiers, and lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoexcitation of astrophysically important states in {sup 26}Mg

We performed a nuclear resonance fluorescence experiment to determine the energy and quantum numbers of excited states in {sup 26}Mg. Spin-parity ambiguities of excited states in {sup 26}Mg, the compound nucleus for the s-process neutron source {sup 22}Ne({alpha},n){sup 25}Mg, result in large uncertainties in the reaction rates. The present work uses the monoenergetic {gamma}-ray beam from the High-Intensity {gamma}-ray Source to probe states in the excitation energy range of E{sub x}=10.8 to 11.4 MeV. Five excited states were observed and unambiguous quantum numbers were assigned at E{sub x}=10 573.3(8) keV (J{sup {pi}}=1{sup -}), E{sub x}=10 647.3(8) keV (J{sup {pi}}=1{sup +}), E{sub x}=10 805.7(7) keV (J{sup {pi}}=1{sup -}), E{sub x}=10 949.1(8) keV (J{sup {pi}}=1{sup -}), and E{sub x}=11 153.5(10) keV (J{sup {pi}}=1{sup +}). The two natural parity states, located between the {alpha}-particle and neutron thresholds, are expected to significantly influence the rate of the competing {sup 22}Ne({alpha},{gamma}){sup 26}Mg reaction. An important finding of this work is that the E{sub x}=11 154 keV level has unnatural parity, contrary to previous results, and thus does not contribute to the {sup 22}Ne+{alpha} reaction rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rhodium mediated bond activation: from synthesis to catalysis

Recently, our lab has developed monoanionic tridentate ligand, To R , showing the corresponding coordination chemistry and catalyst reactivity of magnesium, zirconium, zinc and iridium complexes. This thesis details synthetic chemistry, structural study and catalytic reactivity of the To R -supported rhodium compounds. Tl[To R ] has been proved to be a superior ligand transfer agent for synthesizing rhodium complexes. The salt metathesis route of Tl[To M ] with [Rh(μ-Cl)(CO)] 2 and [Rh(μ- Cl)(COE)] 2 gives To M Rh(CO) 2 (2.2) and To M RhH(β 3 -C 8 H 13 ) (3.1) respectively while Tl[To M ] with [Rh(μ-Cl)(CO)] 2 affords To P Rh(CO) 2 (2.3). 2.2 reacts with both strong and weak electrophiles, resulting in the oxazoline N-attacked and the metal center-attacked compounds correspondingly. Using one of the metal center-attacked electrophiles, 2.3 was demonstrated to give high diastereoselectivity. Parallel to COE allylic C-H activation complex 3.1, the propene and allylbenzene allylic C-H activation products have also been synthesized. The subsequent functionalization attempts have been examined by treating with Brønsted acids, Lewis acids, electrophiles, nucleophiles, 1,3-dipolar reagents and reagents containing multiple bonds able to be inserted. Various related complexes have been obtained under these conditions, in which one of the azide insertion compounds reductively eliminates to give an allylic functionalization product stoichiometrically. 3.1 reacts with various primary alcohols to give the decarbonylation dihydride complex To M Rh(H) 2 CO (4.1). 4.1 shows catalytic reactivity for primary alcohol decarbonylation under a photolytic condition. Meanwhile, 2.2 has been found to be more reactive than 4.1 for catalytic alcohol decarbonylation under the same condition. Various complexes and primary alcohols have been investigated as well. The proposed mechanism is based on the stochiometric reactions of the possible metal and organic intermediates. Primary amines, hypothesized to undergo a similar reaction pathway, have been verified to give dehydrogenative coupling product, imines. In the end, the well-developed neutral tridentate Tpm coordinates to the rhodium bis(ethylene) dimer in the presence of TlPF 6 to give the cationic complex, [TpmRh(C 2 H 4 ) 2 ][PF 6 ] (5.1). 5.1 serves as the first example of explicit determination of the solid state hapticity, evidenced by X-ray structure, among all the cationic Tpm R M(C 2 H 4 ) 2 + (Tpm R = Tpm, Tpm*, M = Rh, Ir) derivatives. The substitution chemistry of this compound has been studied by treating with soft and hard donors. The trimethylphosphine-sbustituted complex activates molecular hydrogen to give the dihydride compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of 5,15-bis(hydroxymethyl)porphyrins – simple compounds distantly inspired by the chlorosomal bacteriochlorophylls

A self-assembly paradigm is provided in green photosynthetic bacteria by the chlorin macrocycle bacteriochlorophyll (BChl) c, which contains a 3-(1-hydroxyethyl) substituent, central magnesium ion, and 13-keto group. The assembled BChl c structure is a powerful light-harvesting apparatus that can support life even under extreme low-light conditions. Here, inspired by the work of Balaban, two far simpler porphyrins have been synthesized, 5,15-bis(hydroxymethyl)-10,20-diphenylporphinatozinc(II) (Ph/CH 2 OH) and 5,15-bis(hydroxymethyl)porphinatozinc(II) (H/CH 2 OH), and analogues wherein ethyl replaces hydroxymethyl (Ph/Et and H/Et). Examination of Ph/CH 2 OH and H/CH 2 OH by time-resolved spectroscopy showed an ∼2-fold enhancement in the singlet excited-state lifetime compared to meso-tetraphenylporphinatozinc(II) (ZnTPP). The single-crystal X-ray diffraction revealed distinct packing patterns. Porphyrin Ph/CH 2 OH exhibited double staircases wherein (1) each zinc is pentacoordinate (by apical coordination of one hydroxymethyl group of a porphyrin in the same staircase), (2) the second hydroxymethyl group is hydrogen-bonded to an apically coordinated hydroxymethyl oxygen atom in the adjacent staircase, (3) the porphyrins in a given staircase are coplanar but cofacially offset with each other, and (4) the adjacent staircases are oriented approximately 72° relative to each other. Porphyrin H/CH 2 OH assembled wherein (1) each zinc is hexacoordinate by ligation of hydroxymethyl moieties, (2) each hydroxymethyl –OH is hydrogen-bonded with an acetonitrile solvent molecule in the lattice, and (3) the planes of the four nearest neighbor porphyrins are essentially perpendicular to a given porphyrin. Study of the solid-state packing patterns of sparsely substituted porphyrins enables insights into how the structural design of tetrapyrroles can guide their aggregate self-assembly.

Tran, Vy-Phuong [North Carolina State University, ↗

Microstructure, Mechanical Properties and Corrosion Behavior of Porous Mg-6 wt.% Zn Scaffolds for Bone Tissue Engineering

Porous Mg-based scaffolds have been extensively researched as biodegradable implants due to their attractive biological and excellent mechanical properties. In this study, porous Mg-6 wt.% Zn scaffolds were prepared by powder metallurgy using ammonium bicarbonate particles as space-holder particles. The effects of space-holder particle content on the microstructure, mechanical properties and corrosion resistance of the Mg-6 wt.% Zn scaffolds were studied. The mean porosity and pore size of the open-cellular scaffolds were within the range 6.7-52.2% and 32.3-384.2 µm, respectively. Slight oxidation was observed at the grain boundaries and on the pore walls. The Mg-6 wt.% Zn scaffolds were shown to possess mechanical properties comparable with those of natural bone and had variable in vitro degradation rates. Increased content of space-holder particles negatively affected the mechanical behavior and corrosion resistance of the Mg-6 wt.% Zn scaffolds, especially when higher than 20%. These results suggest that porous Mg-6 wt.% Zn scaffolds are promising materials for application in bone tissue engineering.

36 MATERIALS SCIENCE↗

The Effect of transient change in strain rate on plastic flow behaviour of Al-Mg-Si alloy at elevated temperatures

In extrusion forging processes, the abrupt changes in strain rate follows the plastic deformation of a material within the deforming zone. To simulate accurately this effect, the specific experimental investigation of the plastic flow during the transient change in strain rate should be performed. The present paper deals with the investigation of this effect on the flow stress of an Al-Mg-Si alloy during its deformation at 350 deg. C. The investigation consists of two steps. Both steps are connected to the monotonic uniaxial compression loading of a cylindrical specimen. During the first step the flow behaviour of the alloy is investigated at the constant strain rate wihin the range of 0.1-50 s{sup -1} at the temperature range of 350-430 deg. C. During the second step the strain rate is abruptly increased or decreased from its current value at a fixed engineering strain of 17-21%. From the beginning of the test up to the strain of 17-21% the value of the strain rate is constant and equal to either 1 s{sup -1} or 10 s{sup -1}. At the strain of 17-21% the value of a strain rate is either increased to 10 s{sup -1} or decreased to 1 s{sup -1}.The results of the experimental investigations were used to determine the isothermal flow stress-strain curves of the Al-Mg-Si alloy as well as the heat effect of plastic deformation of the alloy. On basis of these curves, the strain rate sensitivity index m as a function of true strain and temperature was determined. This parameter allows to optimize a technological process of hot forging of the aluminium alloy as well as it is very important data for the construction of a phenomenological flow stress model.

36 MATERIALS SCIENCE↗

Acceptor levels in ZnMgO:N probed by deep level optical spectroscopy

A combination of deep level optical spectroscopy and lighted capacitance voltage profiling has been used to analyze the effect of N into the energy levels close to the valence band of Zn{sub 0.9}Mg{sub 0.1}O. Three energy levels at E{sub V} + 0.47 eV, E{sub V} + 0.35 eV, and E{sub V} + 0.16 eV are observed in all films with concentrations in the range of 10{sup 15}–10{sup 18} cm{sup −3}. The two shallowest traps at E{sub V} + 0.35 eV and E{sub V} + 0.16 eV have very large concentrations that scale with the N exposure and are thus potential acceptor levels. In order to correctly quantify the deep level concentrations, a metal-insulator-semiconductor model has been invoked, explaining well the resulting capacitance-voltage curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inelastic tunneling conductance and magnetoresistance investigations in dual ion-beam sputtered CoFeB(110)/MgO/CoFeB (110) magnetic tunnel junctions

Magnetic tunnel junctions (MTJs) comprising Ta(5)/NiFe(5)/IrMn(15)/CoFeB(5)/Mg(1)/MgO(3.5)/ CoFeB(5)/Ta(5)/Ag(20) (thickness in nm) with (110) oriented CoFeB layers are grown using dual ion beam sputtering. The tunnel magnetoresistance (TMR) of MTJs is found to be significantly bias dependent and exhibits zero bias anomaly (ZBA) which is attributed to the presence of magnetic impurities or diffusion of Mn from antiferromagnetic IrMn in the barrier. Adjacent to the ZBA, two peaks at 24 ± 3 mV and 34 ± 3 mV are also observed, which differ both in intensity as well as their position in the antiparallel and parallel magnetic states, suggesting that they are due to magnon excitations. In addition to this, a phonon peak at 65 ± 3 mV is also observed. The effect of temperature on the inelastic and elastic tunneling contributions is studied in detail in 25–300 K range using the Glazman and Matveev model. Ten series of localized states are found to be involved in hopping conduction in the forbidden gap of MgO barrier. The effect of presence of such inelastic channels is found to be insignificant at low temperatures yielding sizeable enhancement in TMR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of boron diffusion on the perpendicular magnetic anisotropy in Ta|CoFeB|MgO ultrathin films

We have studied structural and magnetic properties of Ta|CoFeB|MgO heterostructures using cross-section transmission electron microscopy (TEM), electron energy loss spectrum (EELS) imaging, and vibrating sample magnetometry. From the TEM studies, the CoFeB layer is found to be predominantly amorphous for as deposited films, whereas small crystallites, diameter of ∼5 nm, are observed in films annealed at 300 °C. We find that the presence of such nanocrystallites is not sufficient for the occurrence of perpendicular magnetic anisotropy. Using EELS, we find that boron diffuses into the Ta underlayer upon annealing. The Ta underlayer thickness dependence of the magnetic anisotropy indicates that ∼0.2 nm of Ta underlayer is enough to absorb the boron from the CoFeB layer and induce perpendicular magnetic anisotropy. Boron diffusion upon annealing becomes limited when the CoFeB layer thickness is larger than ∼2 nm, which coincides with the thickness at which the saturation magnetization M{sub S} and the interface magnetic anisotropy K{sub I} drop by ∼20%. These results show the direct role which boron plays in determining the perpendicular magnetic anisotropy in CoFeB|MgO heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and transport in high pressure oxygen sputter-deposited BaSnO{sub 3−δ}

BaSnO{sub 3} has recently been identified as a high mobility wide gap semiconductor with significant potential for room temperature oxide electronics. Here, a detailed study of the high pressure oxygen sputter-deposition, microstructure, morphology, and stoichiometry of epitaxial BaSnO{sub 3} on SrTiO{sub 3}(001) and MgO(001) is reported, optimized conditions resulting in single-phase, relaxed, close to stoichiometric films. Most significantly, vacuum annealing is established as a facile route to n-doped BaSnO{sub 3−δ}, leading to electron densities above 10{sup 19} cm{sup −3}, 5 mΩ cm resistivities, and room temperature mobility of 20 cm{sup 2} V{sup −1} s{sup −1} in 300-Å-thick films on MgO(001). Mobility limiting factors, and the substantial scope for their improvement, are discussed.

36 MATERIALS SCIENCE↗

AUTOMATED NanoSIMS MEASUREMENTS OF SPINEL STARDUST FROM THE MURRAY METEORITE

We report new O isotopic data on 41 presolar oxide grains, 38 MgAl{sub 2}O{sub 4} (spinel) and 3 Al{sub 2}O{sub 3} from the CM2 meteorite Murray, identified with a recently developed automated measurement system for NanoSIMS. We have also obtained Mg-Al isotopic results on 29 of the same grains (26 spinel and 3 Al{sub 2}O{sub 3}). The majority of the grains have O isotopic compositions typical of most presolar oxides, fall well into the four previously defined groups, and are most likely condensates from either red giant branch or asymptotic giant branch stars. We have also discovered several grains with more unusual O and Mg compositions suggesting formation in extreme astrophysical environments, such as novae and supernovae (SNe). One of these grains has massive enrichments in {sup 17}O, {sup 25}Mg, and {sup 26}Mg, which are isotopic signatures indicative of condensation from nova ejecta. Two grains of SN origin were also discovered: one has a large {sup 18}O/{sup 16}O ratio typical of Group 4 presolar oxides; another grain is substantially enriched in {sup 16}O, and also contains radiogenic {sup 44}Ca from the decay of {sup 44}Ti, a likely condensate from material originating in the O-rich inner zones of a Type II SN. In addition, several Group 2 presolar spinel grains also have large {sup 25}Mg and {sup 26}Mg isotopic anomalies that are difficult to explain by standard nucleosynthesis in low-mass stars. Auger elemental spectral analyses were performed on the grains and qualitatively suggest that presolar spinel may not have higher-than-stoichiometric Al/Mg ratios, in contrast to SIMS results obtained here and reported previously.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructure investigations of Yb- and Bi-doped Mg{sub 2}Si prepared from metal hydrides for thermoelectric applications

Within the field of thermoelectric materials for energy conversion magnesium silicide, Mg{sub 2}Si, is an outstanding candidate due to its low density, abundant constituents and low toxicity. However electronic and thermal tuning of the material is a required necessity to improve its Figure of Merit, zT. Doping of Yb via reactive YbH{sub 2} into the structure is performed with the goal of reducing the thermal conductivity. Hydrogen is released as a by-product at high temperatures allowing for facile incorporation of Yb into the structure. We report on the properties of Yb- and Bi-doped Mg{sub 2}Si prepared with MgH{sub 2} and YbH{sub 2} with the focus on the synthetic conditions, and samples’ microstructure, investigated by various electron microscopy techniques. Yb is found in the form of both Yb{sub 3}Si{sub 5} inclusions and Yb dopant segregated at the grain boundary substituting for Mg. The addition of 1 at% Yb concentration reduced the thermal conductivity, providing a value of 30 mW/cm K at 800 K. In order to adjust carrier concentration, the sample is additionally doped with Bi. The impact of the microstructure on the transport properties of the obtained material is studied. Idealy, the reduction of the thermal conductivity is achieved by doping with Yb and the electronic transport is adjusted by doping with Bi. Large grain microstructure facilitates the electronic transport. However, the synthetic conditions that provide the optimized microstructure for electrical transport do not facilitate the additional Yb dopant incorporation. Therefore, the Yb and Bi containing sample with the optimized microstructure provides a zT=0.46 at 800 K. - Graphical abstract: 1% or less addition of YbH{sub 2} to Mg{sub 2}Si significantly reduces the thermal conductivity of the material. Yb replaces some Mg in Mg{sub 2}Si and the remainder is distributed as Yb{sub 3}Sb{sub 5} in the Yb-doped Mg{sub 2}Si matrix. Correlation between the observed grain size and transport show the difficulty in simultaneously reducing the thermal conductivity with optimal electronic properties.

36 MATERIALS SCIENCE↗

Lunar and Planetary Science XXXVI, Part 1

Contents include the following: Observations with Near Infrared Spectrometer for Hayabusa Mission in the Cruising Phase. First Results of Quadrantid Meteor Spectrum. Compositional Investigation of Binary Near-Earth Asteroid 66063 (1998 RO1): A Potentially Undifferentiated Assemblage. Impact-induced Hydrothermal Activity on Early Mars. HRTEM and EFTEM Studies of Phyllosilicate-Organic Matter Associations in Matrix and Dark Inclusions in the EET92042 CR2 Carbonaceous Chondrite. Volumetric Analysis of Martian Rampart Craters. High Pressure Melting of H-Chondrite: A Match for the Martian Basalt Source Mantle. MERView: A New Computer Program for Easy Display of MER-acquired M ssbauer Data. Distribution, Exchange, and Topographic Control of Subsurface Ice on Mars. Shock-induced Damage Beneath Normal and Oblique Impact Craters. Amphitrites Patera Studied from the Mars Express HRSC Data. Oxygen Isotope Microanalysis of Enveloping Compound Chondrules in CV3 and LL3 Chondrites. Gamma-Ray Irradiation in the Early Solar System and the Conundrum of the Lu-176 Decay Constant. Magnesium Isotope Mapping of Silica-rich Grains Having. Extreme Oxygen Isotope Anomalies Extreme Oxygen Isotopic Anomalies from Irradiation in the Early Solar System, Re-Examining the Role of Chondrules in Producing the Elemental Fractionations in Chondrites. Meteorite Data on the Solar Modulation of Galactic Cosmic Rays and an Inference on the Solar Activity Influence on Climate of the Earth. Volatiles Enrichments and Composition of Jupiter. Thinking Like a Wildcatter Prospecting for Methane in Arabia Terra, Mars. Size Distribution of Genesis Solar Wind Array Collector Fragments. Initial Subdivision of Genesis Early Science Polished Aluminum Collector. Presolar Graphite and Its Noble Gases. Young Pb-Isotopic Ages of Chondrules in CB Carbonaceous Chondrites. Fe Isotopic Composition of Martian Meteorites. Petrology and Geochemistry of Nakhlite MIL 03346: A New Martian Meteorite from Antarctica.

Source record↗

Multi-step ion beam etching of sub-30 nm magnetic tunnel junctions for reducing leakage and MgO barrier damage

We have demonstrated the fabrication of sub 30 nm magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy. The multi-step ion beam etching (IBE) process performed for 18 min between 45 deg. and 30 deg. , at 500 V combined ion supply voltage, resulted in a 55 nm tall MTJ with 28 nm diameter. We used a negative tone electron beam resist as the hard mask, which maintained its lateral dimension during the IBE, allowing almost vertical pillar side profiles. The measurement results showed a tunnel magneto-resistance ratio of 13% at 1 k{Omega} junction resistance. With further optimization in IBE energy and multi-step etching process, it will be possible to fabricate perpendicularly oriented MTJs for future sub 30 nm non-volatile magnetic memory applications.

36 MATERIALS SCIENCE↗

Nanoscale order in ZnSe:(Mg, O)

Self-assembling of 1O4Mg identical tetrahedral clusters resulting in the nanoscale order in ZnSe:(Mg, O) is presented. Co-doping transforms ZnSe into Mg{sub x}Zn{sub 1−x}O{sub y}Se{sub 1−y} alloy of MgO, MgSe, ZnO and ZnSe. The decrease of a sum of the enthalpies of the constituent compounds and diminution of the strain energy are the causes of this phenomenon. The self-assembling conditions are obtained from the free energy minimum when magnesium and oxygen are in the dilute and ultra dilute limits, correspondingly. The occurrence of 1O4Mg clusters and completion of self-assembling when all oxygen atoms are in clusters are results of the continuous phase transitions. The self-assembling occurrence temperature does not depend on the oxygen content and it is a function of magnesium concentration. Mg{sub x}Zn{sub 1−x}O{sub y}Se{sub 1−y} with all oxygen atoms in clusters can be obtained in temperature ranges from T = 206 °C (x = 0.001, y = 1×10{sup −4}) to T = 456 °C (x = 0.01, y = 1×10{sup −4}) and from T = 237 °C (x = 0.001, y = 1×10{sup −6}) to T = 462 °C (x = 0.01, y = 1×10{sup −6})

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three-terminal magnetic tunneling junction device with perpendicular anisotropy CoFeB sensing layer

We demonstrated read and write characteristics of a three terminal memory device with a perpendicular anisotropy-free layer of a strip of [Co/Ni] and a low-switching perpendicular-anisotropy CoFeB/MgO sensing layer. This new design of the cell results in a small cell area. The switching magnetic field of the sensing layer can be decreased by changing sputtering gas for the Ta-cap from Ar to Kr. An electron energy-loss spectroscopy analysis of the cross-section of the magnetic tunneling junction (MTJ) revealed that the boron content in CoFeB with a Kr-sputtered Ta-cap was smaller than that with an Ar-sputtered one. A change in resistance for the MTJ was observed that corresponded to the magnetic switching of the Co/Ni wire and its magnetoresistance ratio and critical current were 90% and 0.8 mA, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗