Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Chapter 12: Sea Level Rise

Global mean sea level (GMSL) has risen by about 7-8 inches (about 16-21 cm) since 1900, with about 3 of those inches (about 7 cm) occurring since 1993. Human-caused climate change has made a substantial contribution to GMSL rise since 1900, contributing to a rate of rise that is greater than during any preceding century in at least 2,800 years. Relative to the year 2000, GMSL is very likely to rise by 0.3-0.6 feet (9-18 cm) by 2030, 0.5-1.2 feet (15-38 cm) by 2050, and 1.0-4.3 feet (30-130 cm) by 2100. Future pathways have little effect on projected GMSL rise in the first half of the century, but significantly affect projections for the second half of the century. Emerging science regarding Antarctic ice sheet stability suggests that, for high emission scenarios, a GMSL rise exceeding 8 feet (2.4 m) by 2100 is physically possible, although the probability of such an extreme outcome cannot currently be assessed. Regardless of pathway, it is extremely likely that GMSL rise will continue beyond 2100. Relative sea level (RSL) rise in this century will vary along U.S. coastlines due, in part, to changes in Earth's gravitational field and rotation from melting of land ice, changes in ocean circulation, and vertical land motion (very high confidence). For almost all future GMSL rise scenarios, RSL rise is likely to be greater than the global average in the U.S. Northeast and the western Gulf of Mexico. In intermediate and low GMSL rise scenarios, RSL rise is likely to be less than the global average in much of the Pacific Northwest and Alaska. For high GMSL rise scenarios, RSL rise is likely to be higher than the global average along all U.S. coastlines outside Alaska. Almost all U.S. coastlines experience more than global mean sea level rise in response to Antarctic ice loss, and thus would be particularly affected under extreme GMSL rise scenarios involving substantial Antarctic mass loss. As sea levels have risen, the number of tidal floods each year that cause minor impacts (also called "nuisance floods") have increased 5- to 10-fold since the 1960s in several U.S. coastal cities. Rates of increase are accelerating in over 25 Atlantic and Gulf Coast cities. Tidal flooding will continue increasing in depth, frequency, and extent this century. Assuming storm characteristics do not change, sea level rise will increase the frequency and extent of extreme flooding associated with coastal storms, such as hurricanes and nor'easters. A projected increase in the intensity of hurricanes in the North Atlantic could increase the probability of extreme flooding along most of the U.S. Atlantic and Gulf Coast states beyond what would be projected based solely on RSL rise. However, there is low confidence in the projected increase in frequency of intense Atlantic hurricanes, and the associated flood risk amplification and flood effects could be offset or amplified by such factors as changes in overall storm frequency or tracks.

Sweet, W. V.↗

Global and Regional Sea Level Rise Scenarios for the United States

The Sea Level Rise and Coastal Flood Hazard Scenarios and Tools Interagency Task Force, jointly convened by the U.S. Global Change Research Program (USGCRP) and the National Ocean Council (NOC), began its work in August 2015. The Task Force has focused its efforts on three primary tasks: 1) updating scenarios of global mean sea level (GMSL) rise, 2) integrating the global scenarios with regional factors contributing to sea level change for the entire U.S. coastline, and 3) incorporating these regionally appropriate scenarios within coastal risk management tools and capabilities deployed by individual agencies in support of the needs of specific stakeholder groups and user communities. This technical report focuses on the first two of these tasks and reports on the production of gridded relative sea level (RSL, which includes both ocean-level change and vertical land motion) projections for the United States associated with an updated set of GMSL scenarios. In addition to supporting the longer-term Task Force effort, this new product will be an important input into the USGCRP Sustained Assessment process and upcoming Fourth National Climate Assessment (NCA4) due in 2018. This report also serves as a key technical input into the in-progress USGCRP Climate Science Special Report (CSSR).

Sweet, William V.↗

Enhancing New York City's Resilience to Sea Level Rise and Increased Coastal Flooding

The large population and major economic assets along New York City's extensive waterfront face exposure to sea level rise (SLR) and coastal flooding. The New York City Panel on Climate Change (NPCC), an advisory group of academic and private-sector experts, provides the city with scientific guidance on future climate risks. Here we highlight current NPCC research on sea level rise, coastal flooding, with some of the City's current and planned responses.Twentieth century SLR in New York City (2.8 cm/decade) exceeded the global average (1.2-1.9 cm/decade), underscoring a greater regional risk. In 2015, the NPCC projected a 2080s SLR of 46-99 cm relative to 2000-2004 (25th -75th percentile) at the Battery, with high-end SLR estimates (90th percentile) of 1.9 m by 2100. Growing evidence of potential instability of the West Antarctic Ice Sheet (WAIS) suggests the possibility of even higher future sea levels. We therefore present a new low probability, yet high impact SLR scenario for New York City, which incorporates these ice sheet instabilities. The new SLR projections will be combined with coastal flood return period curves for the 100-year storm flood levels. Related ongoing research examines changes in storm characteristics, surge--sea level rise interactions, and mapping of neighborhoods at risk.Guided by NPCC findings, New York City undertakes programs to strengthen coastal defenses, tailored to specific neighborhood needs. NPCC in collaboration with the city, continues to investigate vulnerability to extreme climate events, such as inland floods and coastal storms, and to develop stronger links with community-based stakeholder groups. New York City's plans to enhance coastal urban resiliency stand as a model for other urban coastal centers as they prepare for climate change.

Gornitz, Vivien↗

Subsetting Satellite Level 2 Data at NASA GES DISC

Working with Level 2 satellite swath data can prove challenging for many users. The variety of metadata, high resolution, and orbit-based nature of such data makes it difficult to acquire and manage. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) has developed a general-purpose Level 2 Subsetting service that facilitates access to Level 2 data products. The Level 2 Subsetter enables users to sub-sample swath and gridded data in a variety of ways: by location (in a lat/lon box, within a circle of given radius, or at a specific point), by time (via swath segments or collections of granules), by any nonspatial dimension, or by selecting specific variables. The Level 2 Subsetting service also allows users to specify output data configuration and file format. In this presentation, we will detail and demonstrate the capabilities of this new service.

Huwe, Paul↗

Sea Level Rise in the Samoan Islands Escalated by Viscoelastic Relaxation After the 2009 Samoa-Tonga Earthquake

The Samoan islands are an archipelago hosting a quarter million people mostly residing inthree major islands, Savai'i and Upolu (Samoa), and Tutuila (American Samoa). The islands haveexperienced sea level rise by 2-3 mm/year during the last half century. The rate, however, has dramaticallyincreased following the Mw 8.1 SamoaTonga earthquake doublet (megathrust + normal faulting) inSeptember 2009. Since the earthquake, we found largescale gravity increase (0.5 Gal/year) around theislands and ongoing subsidence (8-16 mm/year) of the islands from our analysis of Gravity Recovery AndClimate Experiment gravity and GPS displacement data. The postseismic horizontal displacement is faster inSamoa, while the postseismic subsidence rate is considerably larger in American Samoa. The analysis oflocal tide gauge records and satellite altimeter data also identified that the relative sea level rise becomesfaster by 7-9 mm/year in American Samoa than Samoa. A simple viscoelastic model with a Maxwellviscosity of 2–3×10(exp 18) Pa s for the asthenosphere explained postseismic deformation at nearby GPS sites aswell as Gravity Recovery And Climate Experiment gravity change. It is found that the constructiveinterference of viscoelastic relaxation from both megathrust and normal faulting has intensified thepostseismic subsidence at American Samoa, causing ~5 times faster sea level rise than the global average.Our model indicates that this trend is likely to continue for decades and result in sea level rise of 30-40 cm,which is independent of and in addition to anticipated climaterelated sea level rise. It will worsen coastalflooding on the islands leading to regular nuisance flooding.

Han, Shin-Chan↗

CALIPSO Lidar Level 3 Aerosol Profile Product: Version 3 Algorithm Design

The CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) level 3 aerosol profile product reports globally gridded, quality-screened, monthly mean aerosol extinction profiles retrieved by CALIOP (the Cloud-Aerosol Lidar with Orthogonal Polarization). This paper describes the quality screening and averaging methods used to generate the version 3 product. The fundamental input data are CALIOP level 2 aerosol extinction profiles and layer classification information (aerosol, cloud, and clear-air). Prior to aggregation, the extinction profiles are quality-screened by a series of filters to reduce the impact of layer detection errors, layer classification errors, extinction retrieval errors, and biases due to an intermittent signal anomaly at the surface. The relative influence of these filters are compared in terms of sample rejection frequency, mean extinction, and mean aerosol optical depth (AOD). The “extinction QC flag” filter is the most influential in preventing high-biases in level 3 mean extinction, while the “misclassified cirrus fringe” filter is most aggressive at rejecting cirrus misclassified as aerosol. The impact of quality screening on monthly mean aerosol extinction is investigated globally and regionally. After applying quality filters, the level 3 algorithm calculates monthly mean AOD by vertically integrating the monthly mean quality-screened aerosol extinction profile. Calculating monthly mean AOD by integrating the monthly mean extinction profile prevents a low bias that would result from alternately integrating the set of extinction profiles first and then averaging the resultant AOD values together. Ultimately, the quality filters reduce level 3 mean AOD by −24 and −31 % for global ocean and global land, respectively, indicating the importance of quality screening.

Tackett, Jason L.↗

CALIPSO Level 3 Stratospheric Aerosol Product: Version 1.00 Algorithm Description and Initial Assessment

In August 2018,the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) project released a new level 3 stratospheric aerosol profile data product derived from nearly 12 years of measurements acquired by the space-borne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP).This monthly averaged, gridded level 3 product is based on version 4.2 of the CALIOP level 1 and level 2 data products, which feature significantly improved calibration that now makes it possible to reliably retrieve profiles of stratospheric aerosol extinction and backscatter coefficients. This paper describes the science algorithm and data handling techniques that were developed to generate the CALIPSO version 1.00 level 3 stratospheric aerosol profile product. Further, we show that the retrieved extinction profiles capture the major stratospheric perturbations over the last decade resulting from volcanic eruptions, extreme smoke events, and signatures of stratospheric dynamics. Initial assessment of the product by inter-comparison with the stratospheric aerosol retrievals from the Stratospheric Aerosol and Gas Experiment III (SAGE III) on the International Space Station (ISS) indicates good agreement in the tropical stratospheric aerosol layer (30oN-30oS),where the average difference between zonal mean extinction profiles is typically less than 25% between 20km and 30km. However, differences can exceed 100% in the very low aerosol loading regimes found above 25 km at higher latitudes.

Jayanta Kar↗

Lessons and Recommendations for Board-Level Testing with Protons

Protons with sufficiently high energy, provided in a broad field covering on the order of 0.1m2 can be used to perform board-level testing for single event effects (SEE). NASA has used this approach for board-level testing over the last 20 years. Although many difficulties inherent in SEE testing are simplified when using a board-level test, including reduced cost, the method is inherently risky because of the limited value of the collected data and the potential to make critical mistakes when performing SEE testing this way, leading to data of less value. Historically, NASA’s approach to proton board-level testing has been limited to lower criticality applications. However, with users both inside and outside NASA using this method for higher levels of mission assurance, we have put together a set of lessons and recommendations to improve the value of data collected using this method. Focus areas covered include test preparation, test execution, and interpretation of results.

Guertin, Steven M.↗

Projected land ice contributions to twenty-first-century sea level rise

The land ice contribution to global mean sea level rise has not yet been predicted1 using ice sheet and glacier models for the latest set of socio-economic scenarios, nor using coordinated exploration of uncertainties arising from the various computer models involved. Two recent international projects generated a large suite of projections using multiple models2,3,4,5,6,7,8, but primarily used previous-generation scenarios9 and climate models10, and could not fully explore known uncertainties. Here we estimate probability distributions for these projections under the new scenarios11,12 using statistical emulation of the ice sheet and glacier models. We find that limiting global warming to 1.5 degrees Celsius would halve the land ice contribution to twenty-first-century sea level rise, relative to current emissions pledges. The median decreases from 25 to 13 centimetres sea level equivalent (SLE) by 2100, with glaciers responsible for half the sea level contribution. The projected Antarctic contribution does not show a clear response to the emissions scenario, owing to uncertainties in the competing processes of increasing ice loss and snowfall accumulation in a warming climate. However, under risk-averse (pessimistic) assumptions, Antarctic ice loss could be five times higher, increasing the median land ice contribution to 42 centimetres SLE under current policies and pledges, with the 95th percentile projection exceeding half a metre even under 1.5 degrees Celsius warming. This would severely limit the possibility of mitigating future coastal flooding. Given this large range (between 13 centimetres SLE using the main projections under 1.5 degrees Celsius warming and 42 centimetres SLE using risk-averse projections under current pledges), adaptation planning for twenty-first-century sea level rise must account for a factor-of-three uncertainty in the land ice contribution until climate policies and the Antarctic response are further constrained.

Tamsin L. Edwards↗

Trends in Europe Storm Surge Extremes Match the Rate of Sea-level Rise

Coastal communities across the world are already feeling the disastrous impacts of climate change through variations in extreme sea levels1. These variations reflect the combined effect of sea-level rise and changes in storm surge activity. Understanding the relative importance of these two factors in altering the likelihood of extreme events is crucial to the success of coastal adaptation measures. Existing analyses of tide gauge records agree that sea-level rise has been a considerable driver of trends in sea-level extremes since at least 1960. However, the contribution from changes in storminess remains unclear, owing to the difficulty of inferring this contribution from sparse data and the consequent inconclusive results that have accumulated in the literature. Here we analyse tide gauge observations using spatial Bayesian methods to show that, contrary to current thought, trends in surge extremes and sea-level rise both made comparable contributions to the overall change in extreme sea levels in Europe since 1960 . We determine that the trend pattern of surge extremes reflects the contributions from a dominant north–south dipole associated with internal climate variability and a single-sign positive pattern related to anthropogenic forcing. Our results demonstrate that both external and internal influences can considerably affect the likelihood of surge extremes over periods as long as 60 years, suggesting that the current coastal planning practice of assuming stationary surge extremes might be inadequate.

Francisco M Calafat↗

Sea-Level Rise Projections for Maryland 2023

This report provides updated projections of sea-level rise in the State of Maryland, as required at least every five years by the Maryland Commission on Climate Change Act of 2015. The Sixth Assessment Report (AR6) for the Intergovernmental Panel on Climate Change (IPCC) produced a database of probabilistic projections of relative sea-level rise for tide-gauge locations around the world that reflect differences caused by thermal expansion, glacier and polar ice sheet melting, winds and currents, and vertical land motion. These are available online for seven locations in Maryland and the District of Columbia. Considered together with extrapolations of tide gauge and satellite observations, these projections indicate that sea level rise will likely be between 0.3 m (1 ft) and 0.5 m (1.6 ft) by 2050 (from a 2005 starting point). Beyond the middle of the century, the pathway of greenhouse gas emissions increasingly matters. Under the Current Commitments scenario, the best estimate of sea-level rise in 2100 is 0.8 m (2.7 ft) and sea level will likely rise between 0.6 m (2.0 ft) and 1.1 m (3.5 ft), barring unexpected processes driving rapid ice-sheet melt. Even with exceptionally rapid ice loss, it is very unlikely that it would exceed 1.5 m (4.9 ft).

Donald F Boesch↗

Programable Lead Screw Actuated Self-Leveling Platform

The Programmable Lead Screw Actuated Self-Leveling Platform (PLSASLP) was developed to provide a self-leveling and load-bearing foundation for payloads that need leveling of up to 15 degrees. Consequently, the PLSASLP can also provide a 30-degree conical field of view for precision pointing of instruments. PLSASLP is based on a simple, yet stable geometric model, where undesired motions are restricted to minimize hardware mass and complexity needed to keep the leveling base stable. Redundancy can also be implemented without changing the system architecture. Both system simplicity and configurability indicate the PLSASLP architecture is an effective, viable leveling and pointing solution for flight applications.

Iok M. Wong↗

Analysis of dynamic radiation level changes using surface networks [Book Chapter]

The Fukushima nuclear accident reminds us of severe risk of radioactive substances. Citizen scientists voluntarily collect and share radiation data using geo-tagged sensors for radiation preparedness. However, radiation levels are affected by a number of factors including for example weather conditions, naturally occurring radioactive materials (NORM), and large marble structures. It is therefore difficult to determine whether a higher radiation level comes from a normal variation in background or not. This research analyzes the radiation changes using surface networks that can be used to characterize complex surfaces. A new algorithm has been developed to identify salient peaks and their hills by merging insignificant peaks recur-sively. Salient peaks and their hills are converted into graphs. The structural similarities of graphs were compared over time. The radiation measurements in the city of Koriyama, Japan were analyzed as a case study. The results demonstrated that structural analysis of dynamic radiation levels revealed stable changes, while numeric analysis of radiation levels presented statistically significant differences. This method is able to detect radiation level changes irrespective of background variations.

97 MATHEMATICS AND COMPUTING↗

Performance CMOS voltage level-up shifter circuit topology using pre-drive pull-up transistors

In a first example a voltage level-shifting device includes a level-shifting stage circuit. The level-shifting stage circuit includes a first level-shifting inverter circuit to invert a buffered input signal to drive a first internal node, a second level-shifting inverter circuit to invert a buffered inverted input signal to drive a second internal node, a first pre-drive circuit that receives the buffered inverted input signal, and drives the second internal node based on the state of the buffered inverted input signal, and a second pre-drive circuit that receives the buffered input signal, and drives the first internal node based on the state of the buffered input signal.

Armstrong, Paul R.↗

High-Level Synthesis of Parallel Specifications Coupling Static and Dynamic Controllers

The increased need for efficient ways to implement domain-specific accelerators is driving design methodologies towards the use of abstractions higher than the Register Transfer Level (RTL). In this scenario, High Level Synthesis (HLS) plays a significant role by enabling the automatic generation of custom hardware accelerators starting from high level descriptions (e.g., C code). Conventional HLS tools exploit parallelism mostly at the Instruction Level (ILP). They statically schedule the input specifications, and build centralized Finite State Machine (FSM) controllers. However, aggressive exploitation of ILP in many applications has diminishing returns and, usually, centralized approaches do not efficiently exploit coarser parallelism because FSMs are inherently serial. In this paper we present a HLS framework able to synthesize applications that, beside ILP, also expose Task Level Parallelism (TLP). An application can expose TLP through annotations that identify the parallel functions (i.e., tasks). To generate accelerators that efficiently execute concur- rent tasks, we need to solve several issues: devise a mechanism to support concurrent execution flows, exploit memory parallelism, and manage synchronization. To support concurrent execution flows, we introduce a novel adaptive controller. The adaptive controller is composed of a set of interacting control elements that independently manage the execution of a single operation or function call. These control elements check dependencies and resource constraints at runtime, enabling as soon as possible execution. To support parallel access to shared memories and synchronization, we introduce a novel Hierarchical Memory Interface (HMI). With respect to previous solutions, the proposed interface supports multi-ported memories and atomic memory operations, which commonly occur in parallel programming. Our framework can generate the hardware implementation of C functions by employing two different approaches, depending on its characteristics. If a function exposes TLP, then the framework generates hardware implementations based on the adaptive controller. Otherwise, the framework implements the function by exploiting a more conventional FSM approach, which is optimized for ILP exploitation. We evaluate our framework on a set of parallel applications, and show substantial performance improvements (average speedup of 4.7) with limited area over- heads (average area increase of 5.48 times).

Castellana, Vito G.↗

High-Level Synthesis of Parallel Specifications Coupling Static and Dynamic Controllers

The increased need for efficient ways to implement domain-specific accelerators is driving design methodologies towards the use of abstractions higher than the Register Transfer Level (RTL). In this scenario, High Level Synthesis (HLS) plays a significant role by enabling the automatic generation of custom hardware accelerators starting from high level descriptions (e.g., C code). Conventional HLS tools exploit parallelism mostly at the Instruction Level (ILP). They statically schedule the input specifications, and build centralized Finite State Machine (FSM) controllers. However, aggressive exploitation of ILP in many applications has diminishing returns and, usually, centralized approaches do not efficiently exploit coarser parallelism because FSMs are inherently serial. In this paper we present a HLS framework able to synthesize applications that, beside ILP, also expose Task Level Parallelism (TLP). An application can expose TLP through annotations that identify the parallel functions (i.e., tasks). To generate accelerators that efficiently execute concur- rent tasks, we need to solve several issues: devise a mechanism to support concurrent execution flows, exploit memory parallelism, and manage synchronization. To support concurrent execution flows, we introduce a novel adaptive controller. The adaptive controller is composed of a set of interacting control elements that independently manage the execution of a single operation or function call. These control elements check dependencies and resource constraints at runtime, enabling as soon as possible execution. To support parallel access to shared memories and synchronization, we introduce a novel Hierarchical Memory Interface (HMI). With respect to previous solutions, the proposed interface supports multi-ported memories and atomic memory operations, which commonly occur in parallel programming. Our framework can generate the hardware implementation of C functions by employing two different approaches, depending on its characteristics. If a function exposes TLP, then the framework generates hardware implementations based on the adaptive controller. Otherwise, the framework implements the function by exploiting a more conventional FSM approach, which is optimized for ILP exploitation. We evaluate our framework on a set of parallel applications, and show substantial performance improvements (average speedup of 4.7) with limited area over- heads (average area increase of 5.48 times).

Castellana, Vito G.↗

Computational Fermi Level Engineering and Doping-Type Conversion of Ga2O3 Via Three-Step Processing

Ga2O3 is being actively explored for power electronics, deep-ultraviolet optoelectronics, and other applications due to its ultra-wide bandgap and low projected fabrication cost of large-size and high-quality crystals. N-type doping of Ga2O3 can be achieved and tuned, but p-type doping faces fundamental obstacles due to deep character of acceptor levels and polaron transport of resulting holes. However, successful engineering of Ga2O3 based devices requires critical control of doping density, Fermi level position, and free carrier concentration, providing opportunities for predictive process simulation. We use first-principles defect theory and defect equilibrium calculations to simulate a 3-step growth-annealing-quench protocol for hydrogen assisted Mg doping in Ga2O3, taking into account the hydrogen-oxygen-water gas phase equilibrium. We predict type conversion to a net p-type regime following O-rich annealing after growth under reducing conditions in the presence of H2. This process is similar to the Mg acceptor activation by H removal in GaN. We show that there is an optimal temperature that maximizes the net acceptor density during the equilibrium annealing step for a given Mg doping level. Quenching of non-equilibrium annealed samples then results in a Fermi level EF below mid-gap down to about EV +1.5 eV, creating a significant number of uncompensated neutral MgGa0 acceptors. The resulting free hole concentration in quenched samples is very low (109 – 1012 cm-3) due to deep energy level of these Mg acceptors, but this type converted Ga2O3 material can create a significant built-in field in a p-n junction with an adjoining n-type material. Additionally, the electron concentration is greatly suppressed in such acceptor-doped Ga2O3, which could enable the use as a current blocking layer to fabricate normally-off (enhancement-mode) vertical Ga2O3 based metal-oxide-semiconductor field effect transistors (MOSFETs), and as a guard ring for edge termination in MOSFETs and Schottky barrier diodes (SBDs) with increased breakdown voltage.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗

Transition probabilities of the low-lying levels of Kr XXIV

Energy levels, radiative rates, and wavelengths are calculated for all levels of 3s{sup 2}3p, 3s3p{sup 2}, 3s{sup 2}3d, 3p{sup 3}, 3s3p3d, 3p{sup 2}3d and 3s3d{sup 2} configurations of Al-like krypton ion (Kr XXIV). Multiconfigurational Dirac–Hartree–Fock (MCDHF) method is adopted for calculating energy levels and radiative rates. Transition probabilities are reported for E1 and M2 transitions from the ground level. The valence–valence and core–valence correlation effects are accounted for in a systematic way. Breit interactions and quantum electrodynamics effects are estimated in subsequent relativistic configuration interaction calculations. Comparisons are made with the available data in the literature and good agreement has been found which confirms the reliability of our results.

74 ATOMIC AND MOLECULAR PHYSICS↗