SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In cooperation with NASA's Solar System Exploration Subcommittee (SSES) the Jet Propulsion Laboratory (JPL) is conducting a series of studies to assess the feasibility of planetary science missions proposed for launch in the 2006-2010 time frame and to prioritize technology development steps that will enable these missions.
A bounded vortex flow is a hydrodynamic approach for removal of particles from a surface without scattering the particles onto nearby surfaces. The bounded vortex flow field is generated by a nozzle that combines azimuthally tilted jets arranged in a circular pattern and a central suction port. When the nozzle face is directed toward an ‘impingement surface’, the flow develops a wall-normal intake vortex below the suction outlet, which causes high shear stress on the impingement surface. When particles are present on the impingement surface, the high shear stress causes particles to roll along the surface and to be lifted off the surface and transported up the core of the wall-normal vortex into the suction outlet. In typical applications, the nozzle would be translated along the impingement surface to clean particles from the surface. The current paper reports on an experimental study of the effect of nozzle translation on the effectiveness of the bounded vortex flow field for particle mitigation. The effectiveness of particle mitigation was examined as a function of flow rate through the nozzle, particle size, and nozzle translation velocity relative to the impingement surface. As a result, numerical computations are used to relate the flow rate to the maximum shear stress on the impingement surface, which is then used to theoretically predict onset of particle motion.
A theoretical and experimental investigation of the noise and unsteady surface pressure characteristics of an isolated airfoil in a uniform mean velocity, homogeneous, nearly-isotropic turbulence field was conducted. Wind tunnel experiments were performed with a 23 cm chord, two dimensional NACA 0012 airfoil over a free stream Mach number range of 0.1 to 0.5. Far-field noise spectra and directivity were measured in an anechoic chamber that surrounded the tunnel open jet test section. Spanwise and chordwise distribution of unsteady airfoil surface pressure spectra and surface pressure cross-spectra were obtained. Incident turbulence intensities, length scales, spectra, and spanwise cross-spectra, required in the calculation of far-field noise and surface pressure characteristics were also measured.
The surface finishing of X ray grazing incidence optics is a most demanding area of optical processing, both in terms of metrology and application of optical finishing techniques. An existing optical mirror was processed using a new removal technique that uses a jet of finely dispersed and extremely small particles that impact a surface, which under the correct conditions, produces an ultrasmooth surface, especially on aspheric curvatures. The surfaces of the SO56 mirror are tapered conical shapes that have a continuously changing radius with the primary mirror having a parabolic shape and the secondary mirror a hyperbolic shape. An optical ray trace that was conducted of a telescope used the measured parameters from the existing substrates to set up the prescription for the optical layout. The optimization indicated a wavefront performance of 0.10 A at 0.633 micron.
The cometary nucleus is assumed to be triaxial or axisymmetric spheroid rotating about its axis of maximum moment of inertia and is forced to precess due to jets of ejected material. Randomly placed regions of exposed ice on the surface of the nucleus are assumed to produce gas and dust. The solution of the heat conduction equation for each active region is used to find the gas sublimation rate and the jet acceleration. Precession of the comet nucleus is followed numerically using a phase-averaged system of equations. The gas production curves and the variation of the spin axis during the orbital motion of the comet are presented.
The fluid mechanics of the basic discrete hole film cooling process is described as an inclined jet in crossflow and a cusp shaped coolant flow channel contour that increases the efficiency of the film cooling process is hypothesized. The design concept requires the channel to generate a counter rotating vortex pair secondary flow within the jet stream by virture of flow passage geometry. The interaction of the vortex structures generated by both geometry and crossflow was examined in terms of film cooling effectiveness and surface coverage. Comparative data obtained with this vortex generating coolant passage showed up to factors of four increases in both effectiveness and surface coverage over that obtained with a standard round cross section flow passage. A streakline flow visualization technique was used to support the concept of the counter rotating vortex pair generating capability of the flow passage design.
A procedure has been developed to calculate the effects of blowing two jets over a swept tapered wing at low subsonic speeds. The algorithm used is based on a vortex lattice representation of the wing lifting surface and a line sink-source distribution to simulate the effects of the jet exhaust on the wing lift and drag. The method is limited to those cases where the jet exhaust does not intersect or wash the wing. The predictions of this relatively simple procedure are in remarkably good agreement with experimentally measured interference lift and interference induced drag.
Time and flow-direction responses of shearstress-sensitive liquid crystal coatings were explored experimentally. For the time-response experiments, coatings were exposed to transient, compressible flows created during the startup and off-design operation of an injector-driven supersonic wind tunnel. Flow transients were visualized with a focusing Schlieren system and recorded with a 1000 frame/sec color video camera. Liquid crystal responses to these changing-shear environments were then recorded with the same video system, documenting color-play response times equal to, or faster than, the time interval between sequential frames (i.e., 1 millisecond). For the flow-direction experiments, a planar test surface was exposed to equal-magnitude and known-direction surface shear stresses generated by both normal and tangential subsonic jet-impingement flows. Under shear, the sense of the angular displacement of the liquid crystal dispersed (reflected) spectrum was found to be a function of the instantaneous direction of the applied shear. This technique thus renders dynamic flow reversals or flow divergences visible over entire test surfaces at image recording rates up to 1 KHz. Extensions of the technique to visualize relatively small changes in surface shear stress direction appear feasible.
We have performed a fully three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulation ofjet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The initial simulation results show that a bipolar jet (velocity approx.0.3c) is created, as shown by previous two-dimensional axi- symmetric simulations with mirror symmetry at the equator. The three-dimensional simulation ran over 100 light crossing time units (T(sub s) = r(sub s)/c, where r(sub s = 2GM/c(sup 2), which is considerably longer than the previous simulations. We show that the jet is initially formed as predicted owing in part to magnetic pressure from the twisting of the initially uniform magnetic field and from gas pressure associated with shock formation in the region around r = 3r(sub s). At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface ofthe thickened (torus-like) disk. It should be noted that no streaming matter from a donor is included at the outer boundary in the simulation (an isolated black hole not binary black hole). The wind flows outward with a wider angle than the initial jet. The widening of the jet is consistent with the outward-moving torsional Alfven waves. This evolution of disk-jet coupling suggests that the jet fades with a thickened accretion disk because of the iack of streaming materiai from an accompanying star.
A material response model is developed for the determination of erosion rates and thermal response of woven materials to enable accurate thermal protection material sizing and future missions to Venus and giant planets. The stagnation-point thermal response is further evaluated using a Monte Carlo global sensitivity analysis to determine the interactions between key parameters in the material surface energy balance, such as, convective blowing correction parameter and weave material properties including isotropic and orthotropic thermal conductivites. The time-accurate material response for the dual layer weave erosion and surface temperatures show excellent agreement with stagnation flat face arc-jet tests involving time-varying aeroheating-cooling cycles. The high-fidelity Monte Carlo sensitivity analysis technique was used to address challenges in thermal protection sizing for the Adaptive Deployable Entry and Placement Technology (ADEPT) system, a low ballistic coefficient hypersonic decelerator. The results represent new correlations for such weaves involving Carbon-air oxidation equilibrium chemistry. Through the multi-variate regression analyses and uncertainty rankings performed, only three properties were found to contribute to the transient thermal response of the gore, with emissivity contributing to nearly 95% of the total output uncertainty.
A material response model is developed for the determination of erosion rates and thermal response of woven materials to enable accurate thermal protection material sizing and future missions to Venus and giant planets. The stagnation-point thermal response is further evaluated using a Monte Carlo global sensitivity analysis to determine the interactions between key parameters in the material surface energy balance, such as, convective blowing correction parameter and weave material properties including isotropic and orthotropic thermal conductivites. The time-accurate material response for the dual layer weave erosion and surface temperatures show excellent agreement with stagnation flat face arc-jet tests involving time-varying aeroheating-cooling cycles. The high-fidelity Monte Carlo sensitivity analysis technique was used to address challenges in thermal protection sizing for the Adaptive Deployable Entry and Placement Technology (ADEPT) system, a low ballistic coefficient hypersonic decelerator. The results represent new correlations for such weaves involving Carbon-air oxidation equilibrium chemistry. Through the multi-variate regression analyses and uncertainty rankings performed, only three properties were found to contribute to the transient thermal response of the gore, with emissivity contributing to nearly 95% of the total output uncertainty.
We have performed the first fully three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulation of jet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The initial simulation results show that a bipolar jet (velocity sim 0.3c) is created as shown by previous two-dimensional axisymmetric simulations with mirror symmetry at the equator. The 3-D simulation ran over one hundred light-crossing time units which is considerably longer than the previous simulations. We show that the jet is initially formed as predicted due in part to magnetic pressure from the twisting the initially uniform magnetic field and from gas pressure associated with shock formation. At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface of the thickened (torus-like) disk. It should be noted that no streaming matter from a donor is included at the outer boundary in the simulation (an isolated black hole not binary black hole). The wind flows outwards with a wider angle than the initial jet. The widening of the jet is consistent with the outward moving shock wave. This evolution of jet-disk coupling suggests that the low/hard state of the jet system may switch to the high/soft state with a wind, as the accretion rate diminishes.
We have performed the fully three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulation of jet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The initial simulation results show that a bipolar jet is created as shown by previous two-dimensional axisymmetric simulations with mirror symmetry at the equator. The 3-D simulation ran over one hundred light-crossing time units which is considerably longer than the previous simulations. We show that the jet is initially formed as predicted due in part to magnetic pressure from the twisting the initially uniform magnetic field and from gas pressure associated with shock formation in the region around r = 3 r_S. At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface of the thickened (torus-like) disk. It should be noted that no streaming matter from a donor is included at the outer boundary in the simulation (an isolated black hole not binary black hole). The wind flows outwards with a wider angle than the initial jet. The widening of the jet is consistent with the outward moving torsional Alfven waves (TAWs). This evolution of disk-jet coupling suggests that the jet fades with a thickened accretion disk due to the lack of streaming material from an accompanying star. We will report initial results of emission calculated based on simulations with Kerr metric using a new ray-tracing method developed by S. Feurst and K. Wu. Images include free-free emission, absorption, and electron scattering. Fluorescent iron line emission and its variabilities from black holes will also be calculated based on simulation results.
A wake shield facility providing an ultrahigh vacuum level for space processing is described. The facility is in the shape of a truncated, hollow hemispherical section, one side of the shield convex and the other concave. The shield surface is preferably made of material that has low out-gassing characteristics such as stainless steel. A material sample supporting fixture in the form of a carousel is disposed on the convex side of the shield at its apex. Movable arms, also on the convex side, are connected by the shield in proximity to the carousel, the arms supporting processing fixtures, and providing for movement of the fixtures to predetermined locations required for producing interations with material samples. For MBE processes a vapor jet projects a stream of vaporized material onto a sample surface. The fixtures are oriented to face the surface of the sample being processed when in their extended position, and when not in use they are retractable to a storage position. The concave side of the shield has a support structure including metal struts connected to the shield, extending radially inward. The struts are joined to an end plate disposed parallel to the outer edge of the shield. This system eliminates outgassing contamination.
Vertical/Short Take-Off and Landing (V/STOL) aircraft may encounter operating difficulties while hovering near the ground. Lift loss, hot gas and debris ingestion, and landing surface damage are some of the potential problems which can result from the interaction of the propulsive jets with the airframe and ground. The purpose of the present work is to develop a detailed understanding of a flowfield, a jet exiting from a flat plate impacting a ground plane, that contains much of the essential physics of the complex flows encountered by V/STOL aircraft in hover. To achieve this, a high-resolution time-accurate numerical simulation of the impinging jet flow was performed. The numerical simulation is based on the solution of the laminar compressible Navier-Stokes equations using the Beam-Warming algorithm. Complex start-up and periodic jet and jet-induced vortex structures were captured, including the formation of primary and secondary jet-induced vortices and wall-jet separation. The formation and development of these phenomena are supported by experimental measurements and smoke visualization. Results are compared with appropriate experiments.
An analytical method for predicting the longitudinal aerodynamic characteristics of externally blown flap configurations is described. Two potential flow models make up the prediction method: a wing and flap lifting-surface model and a turbofan engine wake model. A vortex-lattice lifting-surface method is used to represent the wing and multiple-slotted trailing-edge flaps. The jet wake is represented by a series of closely spaced vortex rings normal to a centerline which is free to move to conform to the local flow field. The two potential models are combined in an iterative fashion to predict the jet wake interference effects on a typical EBF configuration. Comparisons of measured and predicted span-load distributions, individual surface forces, forces and moments on the complete configuration, and flow fields are included.
A procedure has been developed for calculating the effects of blowing two jets over a swept tapered wing at low subsonic speeds. The algorithm used is based on a vortex-lattice representation of the wing lifting surface and a line sink-source distribution to simulate the effects of the jet exhaust on the wing lift and drag. The method is limited to those cases in which the jet exhaust does not intersect or wash the wing. The predictions of this relatively simple procedure are in remarkably good agreement with experimentally measured interference lift and interference induced drag.
The study focuses on the interaction of nitrogen flows with thermal protection systems during atmospheric re-entry for NASA flight missions. The Ares multiphysics coupling tool is employed to investigate the coupling between the fluid (US3D) and material response (Icarus) solvers using various modeling approaches. These approaches include the equilibrium thin-film coefficients approach, a weakly coupled approach with temperature coupling, and an approach considering the full chemical composition of the surface and the transfer of pyrolysis gases. The objective is to understand and accurately represent the mechanisms of nitrogen interaction with the surface, such as nitridation and catalytic recombination. The study aims to assess the accuracy of the different approaches by comparing them to experimental results obtained from NASA arc-jet facilities. By addressing these challenges and improving the understanding of nitrogen-surface interactions, it is expected to enhance the design and performance analysis of thermal protection systems for future missions.