Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Integrated Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

An in situ shearing x-ray measurement system for exploring structures and dynamics at the solid–liquid interface

Revealing interfacial structure and dynamics has been one of the essential thematic topics in material science and condensed matter physics. Synchrotron-based x-ray scattering techniques can deliver unique and insightful probing of interfacial structures and dynamics, in particular, in reflection geometries with higher surface and interfacial sensitivity than transmission geometries. We demonstrate the design and implementation of an in situ shearing x-ray measurement system, equipped with both inline parallel-plate and cone-and-plate shearing setups and operated at the advanced photon source at Argonne National Laboratory, to investigate the structures and dynamics of end-tethered polymers at the solid-liquid interface. With a precise lifting motor, a micrometer-scale gap can be produced by aligning two surfaces of a rotating upper shaft and a lower sample substrate. A torsional shear flow forms in the gap and applies tangential shear forces on the sample surface. The technical combination with nanoscale rheology and the utilization of in situ x-ray scattering allow us to gain fundamental insights into the complex dynamics in soft interfaces under shearing. In this work, we demonstrate the technical scope and experimental capability of the in situ shearing x-ray system through the measurements of charged polymers at both flat and curved interfaces upon shearing. Furthermore, through the in situ shearing x-ray scattering experiments integrated with theoretical simulations, we aim to develop a detailed understanding of the short-range molecular structure and mesoscale ionic aggregate morphology, as well as ion transport and dynamics in soft interfaces, thereby providing fundamental insight into a long-standing challenge in ionic polymer brushes with a significant technological impact.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Scaling patch analysis of turbulent planar plume

Proper scaling in turbulent planar plumes is investigated in this study using a scaling patch approach. Based on the scaled boundary conditions, a proper velocity scale for the mean axial flow is the plume centerline velocity U ref = U ctr , and a proper temperature scale for the temperature excess is Θ ref = T ctr – T ∞ , where T ctr is the plume centerline temperature and T ∞ is the ambient fluid temperature. By seeking an admissible scaling, a key concept in the scaling patch approach, for the mean continuity, mean momentum, and mean energy equations, respectively, the following is found: (1) a proper scale for the mean transverse flow is V ref = ( d δ / d x ) U ctr , where d δ / d x is the growth rate of the plume width. (2) A proper scale for the Reynolds shear stress is R vu , ref = U ctr V ref = ( d δ / d x ) U ctr 2 , a mix of the scales for the mean axial and transverse flows. (3) A proper scale for the turbulent heat flux is R v θ , ref = V ref Θ ctr , a mix of the scales for the mean transverse flow and mean temperature excess. The mean transverse flow thus plays a critical role in the scaling of turbulent planar plumes. Approximate functions are developed for the scaled mean transverse flow, Reynolds shear stress, and turbulent temperature flux, and are found to agree favorably with experimental and numerical simulation data. The integral analysis of the mean momentum equation yields a Richardson number Ri, which remains invariant in the axial direction. The Richardson number is defined as Ri = def g β Θ ctr δ t / ( U ctr V ref ) ≈ 1 / 2 , where g is the gravitational acceleration, β is the thermal expansion coefficient, and δ t is the plume half-width based on the mean temperature profile. This Richardson number arises directly from the scaling patch analysis of the mean momentum equation, including both the streamwise and transverse velocity scales.

42 ENGINEERING↗
DOE OSTI2024

Molecular-level design of alternative media for energy-saving pilot-scale fibrillation of nanocellulose

The outstanding mechanical properties, light weight, and biodegradability of cellulose nanofibrils (CNFs) make them promising components of renewable and sustainable next-generation reinforced composite biomaterials and bioplastics. Manufacturing CNFs at a pilot scale requires disc-refining fibrillation of dilute cellulose fibers in aqueous pulp suspensions to shear the fibers apart into their nanodimensional forms, which is, however, an energy-intensive process. Here, in this study, we used atomistic molecular dynamics (MD) simulation to examine media that might facilitate the reduction of interactions between cellulose fibers, thereby reducing energy consumption in fibrillation. The most suitable medium found by the simulations was an aqueous solution with 0.007:0.012 wt.% NaOH:urea, and indeed this was found in pilot-scale experiments to reduce the fibrillation energy by ~21% on average relative to water alone. The NaOH:urea-mediated CNFs have similar crystallinity, morphology, and mechanical strength to those formed in water. The NaOH and urea act synergistically on CNFs to aid fibrillation but at different length scales. NaOH deprotonates hydroxyl groups leading to mesoscale electrostatic repulsion between fibrils, whereas urea forms hydrogen bonds with protonated hydroxyl groups thus disrupting interfibril hydrogen bonds. This suggests a general mechanism in which an aqueous medium that contains a strong base and a small organic molecule acting as a hydrogen-bond acceptor and/or donor may be effectively employed in materials processes where dispersion of deprotonable polymers is required. The study demonstrates how atomic-detail computer simulation can be integrated with pilot-scale experiments in the rational design of materials processes for the circular bioeconomy.

36 MATERIALS SCIENCE↗
DOE OSTI2012

RECONSTRUCTING THE PHOTOMETRIC LIGHT CURVES OF EARTH AS A PLANET ALONG ITS HISTORY

By utilizing satellite-based estimations of the distribution of clouds, we have studied Earth's large-scale cloudiness behavior according to latitude and surface types (ice, water, vegetation, and desert). These empirical relationships are used here to reconstruct the possible cloud distribution of historical epochs of Earth's history such as the Late Cretaceous (90 Ma ago), the Late Triassic (230 Ma ago), the Mississippian (340 Ma ago), and the Late Cambrian (500 Ma ago), when the landmass distributions were different from today's. With this information, we have been able to simulate the globally integrated photometric variability of the planet at these epochs. We find that our simple model reproduces well the observed cloud distribution and albedo variability of the modern Earth. Moreover, the model suggests that the photometric variability of the Earth was probably much larger in past epochs. This enhanced photometric variability could improve the chances for the difficult determination of the rotational period and the identification of continental landmasses for a distant planets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Evolution of turbulence in the expanding solar wind, a numerical study

We study the evolution of turbulence in the solar wind by solving numerically the full three-dimensional (3D) magnetohydrodynamic (MHD) equations embedded in a radial mean wind. The corresponding equations (expanding box model or EBM) have been considered earlier but never integrated in 3D simulations. Here, we follow the development of turbulence from 0.2 AU up to about 1.5 AU. Starting with isotropic spectra scaling as k {sup –1}, we observe a steepening toward a k {sup –5/3} scaling in the middle of the wave number range and formation of spectral anisotropies. The advection of a plasma volume by the expanding solar wind causes a non-trivial stretching of the volume in directions transverse to radial and the selective decay of the components of velocity and magnetic fluctuations. These two effects combine to yield the following results. (1) Spectral anisotropy: gyrotropy is broken, and the radial wave vectors have most of the power. (2) Coherent structures: radial streams emerge that resemble the observed microjets. (3) Energy spectra per component: they show an ordering in good agreement with the one observed in the solar wind at 1 AU. The latter point includes a global dominance of the magnetic energy over kinetic energy in the inertial and f {sup –1} range and a dominance of the perpendicular-to-the-radial components over the radial components in the inertial range. We conclude that many of the above properties are the result of evolution during transport in the heliosphere, and not just the remnant of the initial turbulence close to the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Implementation of a practical Markov chain Monte Carlo sampling algorithm in PyBioNetFit

Abstract Summary Bayesian inference in biological modeling commonly relies on Markov chain Monte Carlo (MCMC) sampling of a multidimensional and non-Gaussian posterior distribution that is not analytically tractable. Here, we present the implementation of a practical MCMC method in the open-source software package PyBioNetFit (PyBNF), which is designed to support parameterization of mathematical models for biological systems. The new MCMC method, am, incorporates an adaptive move proposal distribution. For warm starts, sampling can be initiated at a specified location in parameter space and with a multivariate Gaussian proposal distribution defined initially by a specified covariance matrix. Multiple chains can be generated in parallel using a computer cluster. We demonstrate that am can be used to successfully solve real-world Bayesian inference problems, including forecasting of new Coronavirus Disease 2019 case detection with Bayesian quantification of forecast uncertainty. Availability and implementation PyBNF version 1.1.9, the first stable release with am, is available at PyPI and can be installed using the pip package-management system on platforms that have a working installation of Python 3. PyBNF relies on libRoadRunner and BioNetGen for simulations (e.g. numerical integration of ordinary differential equations defined in SBML or BNGL files) and Dask.Distributed for task scheduling on Linux computer clusters. The Python source code can be freely downloaded/cloned from GitHub and used and modified under terms of the BSD-3 license (https://github.com/lanl/pybnf). Online documentation covering installation/usage is available (https://pybnf.readthedocs.io/en/latest/). A tutorial video is available on YouTube (https://www.youtube.com/watch?v=2aRqpqFOiS4&t=63s). Supplementary information Supplementary data are available at Bioinformatics online.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Induced Radioactivity in Lead Shielding at the National Synchrotron Light Source

The National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory was shut down in September 2014. Lead bricks used as radiological shadow shielding within the accelerator were exposed to stray radiation fields during normal operations. The FLUKA code, a fully integrated Monte Carlo simulation package for the interaction and transport of particles and nuclei in matter, was used to estimate induced radioactivity in this shielding and stainless steel beam pipe from known beam losses. The FLUKA output was processed using MICROSHIELD® to estimate on-contact exposure rates with individually exposed bricks to help design and optimize the radiological survey process. This entire process can be modeled using FLUKA, but use of MICROSHIELD® as a secondary method was chosen because of the project’s resource constraints. Due to the compressed schedule and lack of shielding configuration data, simple FLUKA models were developed in this paper. FLUKA activity estimates for stainless steel were compared with sampling data to validate results, which show that simple FLUKA models and irradiation geometries can be used to predict radioactivity inventories accurately in exposed materials. During decommissioning 0.1% of the lead bricks were found to have measurable levels of induced radioactivity. Finally, post-processing with MICROSHIELD® provides an acceptable secondary method of estimating residual exposure rates.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2015

Equation of state and contact of a strongly interacting Bose gas in the normal state

Here, we theoretically investigate the equation of state and Tan's contact of a nondegenerate three-dimensional Bose gas near a broad Feshbach resonance, within the framework of large-N expansion. Our results agree with the path-integral Monte Carlo simulations in the weak-coupling limit and recover the second-order virial expansion predictions at strong interactions and high temperatures. At resonance, we find that the chemical potential and energy are significantly enhanced by the strong repulsion, while the entropy does not change significantly. With increasing temperature, the two-body contact initially increases and then decreases like T –1 at large temperature, and therefore exhibits a peak structure at about 4T c0 , where T c0 is the Bose-Einstein condensation temperature of an ideal, noninteracting Bose gas. These results may be experimentally examined with a nondegenerate unitary Bose gas, where the three-body recombination rate is substantially reduced. In particular, the nonmonotonic temperature dependence of the two-body contact could be inferred from the momentum distribution measurement.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

First-principles modeling of plasmons in aluminum under ambient and extreme conditions

The theoretical understanding of plasmon behavior is crucial for an accurate interpretation of inelastic scattering diagnostics in many experiments. In this work, we highlight the utility of linear response time-dependent density functional theory (LR-TDDFT) as a first-principles framework for consistently modeling plasmon properties. We provide a comprehensive analysis of plasmons in aluminum from ambient to warm dense matter conditions and assess typical properties such as the dynamical structure factor, the plasmon dispersion, and the plasmon lifetime. We compare our results with scattering measurements and with other TDDFT results as well as models such as the random phase approximation, the Mermin approach, and the dielectric function obtained using static local field corrections of the uniform electron gas parametrized from path-integral Monte Carlo simulations. We conclude that results for the plasmon dispersion and lifetime are inconsistent between experiment and theories and that the common practice of extracting and studying plasmon dispersion relations is an insufficient procedure to capture the complicated physics contained in the dynamic structure factor in its full breadth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2011

Crystallization of an exciton superfluid

Indirect excitons--pairs of electrons and holes spatially separated in semiconductor bilayers or quantum wells--are known to undergo Bose-Einstein condensation and to form a quantum fluid. Here we show that this superfluid may crystallize upon compression. However, further compression results in quantum melting back to a superfluid. This unusual behavior is explained by the effective interaction potential between indirect excitons, which strongly deviates from a dipole potential at small distances due to many-particle and quantum effects. Based on first-principles path-integral Monte Carlo simulations, we compute the complete phase diagram of this system and predict the relevant parameters necessary to experimentally observe exciton crystallization in semiconductor quantum wells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Toward extracting scattering phase shift from integrated correlation functions. III. Coupled channels

The formalism developed in the preceding papers that connects integrated correlation function of a trapped two-particle system to infinite volume scattering phase shift is further extended to coupled-channel systems in the present work. Using a trapped nonrelativistic two-channel system as an example, a new relation is derived that retains the same structure as in the single channel, and has explicit dependence on the phase shifts in both channels but not on the inelasticity. The relation is illustrated by a exactly solvable coupled-channel quantum mechanical model with contact interactions. It is further validated by path integral Monte Carlo simulation of a quasi-one-dimensional model that can admit general interaction potentials. In all cases, we found rapid convergence to the infinite volume limit as the trap size is increased, even at short times, making it potentially a good candidate to overcome signal-to-noise issues in Monte Carlo applications. Published by the American Physical Society 2025

Guo, Peng (ORCID:0000000265660881)↗
DOE OSTI2020

Correlations between conduction electrons in dense plasmas

Most treatments of electron-electron correlations in dense plasmas either ignore them entirely (random phase approximation) or neglect the role of ions (jellium approximation). In this work, we go beyond both these approximations to derive a formula for the electron-electron static structure factor which properly accounts for the contributions of both ionic structure and quantum-mechanical dynamic response in the electrons. The result can be viewed as a natural extension of the quantum Ornstein-Zernike theory of ionic and electronic correlations, and it is suitable for dense plasmas in which the ions are classical and the conduction electrons are quantum-mechanical. Here, the corresponding electron-electron pair distribution functions are compared with the results of path integral Monte Carlo simulations, showing good agreement whenever no strong electron resonance states are present. We construct approximate potentials of mean force which describe the effective screened interaction between electrons. Significant deviations from Debye-Hückel screening are present at temperatures and densities relevant to high-energy density experiments involving warm and hot dense plasmas. The presence of correlations between conduction electrons is likely to influence the electron-electron contribution to the electrical and thermal conductivity. It is expected that excitation processes involving the conduction electrons (e.g., free-free absorption) will also be affected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Dislocation Structure and Mobility in hcp He 4

We assess the core structure and mobility of the screw and edge basal-plane dislocations in hcp 4 He using path-integral Monte Carlo simulations. Our findings provide key insights into recent interpretations of giant plasticity and mass flow junction experiments. First, both dislocations are dissociated into nonsuperfluid Shockley partial dislocations separated by ribbons of stacking fault, suggesting that they are unlikely to act as one-dimensional channels that may display Lüttinger-liquid-like behavior. Second, the centroid positions of the partial cores are found to fluctuate substantially, even in the absence of applied shear stresses. This implies that the lattice resistance to motion of the partial dislocations is negligible, consistent with the recent experimental observations of giant plasticity. Our results indicate that both the structure of the partial cores and the zero-point fluctuations play a role in this extreme mobility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Many-Body Level Statistics of Single-Particle Quantum Chaos

We consider a noninteracting many-fermion system populating levels of a unitary random matrix ensemble (equivalent to the q = 2 complex Sachdev-Ye-Kitaev model)—a generic model of single-particle quantum chaos. We study the corresponding many-particle level statistics by calculating the spectral form factor analytically using algebraic methods of random matrix theory, and match it with an exact numerical simulation. Despite the integrability of the theory, the many-body spectral rigidity is found to have a surprisingly rich landscape. In particular, we find a residual repulsion of distant many-body levels stemming from single-particle chaos, together with islands of level attraction. These results are encoded in an exponential ramp in the spectral form factor, which we show to be a universal feature of nonergodic many-fermion systems embedded in a chaotic medium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Evidence for Dissociation and Ionization in Shock Compressed Nitrogen to 800 GPa

Triple bonding in the nitrogen molecule (N 2 ) is among the strongest chemical bonds with a dissociation enthalpy of 9.8 eV/molecule. Nitrogen is therefore an excellent test bed for theoretical and numerical methods aimed at understanding how bonding evolves under the influence of the extreme pressures and temperatures of the warm dense matter regime. Here, we report laser-driven shock experiments on fluid molecular nitrogen up to 800 GPa and 4.0 g/cm 3 . Line-imaging velocimetry measurements and impedance matching method with a quartz reference yield shock equation of state data of initially precompressed nitrogen. Comparison with numerical simulations using path integral Monte Carlo and density functional theory molecular dynamics reveals clear signatures of chemical dissociation and the onset of L-shell ionization. Furthermore, combining data along multiple shock Hugoniot curves starting from densities between 0.76 and 1.29 g/cm 3 , our study documents how pressure and density affect these changes in chemical bonding and provides benchmarks for future theoretical developments in this regime, with applications for planetary interior modeling, high energy density science, and inertial confinement fusion research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Biexcitons are bound in CsPbBr 3 perovskite nanocrystals

Here, we study the energetics of quasiparticle excitations in CsPbBr 3 perovskite nanocrystals using path integral molecular dynamics simulations. Employing detailed molecular models, we elucidate the interplay of anharmonic lattice degrees of freedom, dielectric confinement, and electronic correlation on exciton and biexciton binding energies of a range of nanocrystal sizes. We find generally good agreement with some experimental observations of binding energies and additionally explain the observed size-dependent Stokes shift. The explicit model calculations are compared with simplified approximations to rationalize the lattice contributions to binding. We find that polaron formation significantly reduces exciton binding energies, whereas these effects are negligible for biexciton interactions. While experimentally the binding energy of biexcitons is uncertain, based on our study, we conclude that biexcitons are bound in CsPbBr 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Fully thermal meta-GGA exchange correlation free-energy density functional

The application of density functional theory to materials in the warm dense matter regime has motivated the development of exchange-correlation functionals which incorporate proper, explicit temperature dependence. Previous work has yielded fully-thermal exchange-correlation free energy functionals at the local density approximation (LDA) and generalized gradient approximation (GGA) levels of refinement. Recently an additive thermal correction scheme was utilized to construct a meta-GGA exchange-correlation (XC) functional in which thermal effects are treated at the GGA level. Here, the f TSCAN free-energy XC functional presented here includes thermal effects through the meta-GGA level in the context of the SCAN (strongly constrained and appropriately normed) ground-state functional. The f TSCAN functional provides generality while achieving similar performance to a thermal GGA functional at high temperatures, e.g. pressures within 1% of path integral Monte Carlo simulations of warm dense hydrogen, and a significant improvement over ground-state functionals. At low temperatures, f TSCAN demonstrates improvements in accuracy relative to lower-level and deorbitalized functionals, indicating that calculations using f TSCAN may be expected to perform well across experimentally relevant densities and pressures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reinforcement Learning Control for Buildings Co-Optimizing Energy, Comfort, and Indoor Air Quality: An Annual Assessment

Efficient control of Heating, Ventilation, and Air Conditioning (HVAC) systems is crucial for optimizing energy use and maintaining indoor comfort in buildings. Traditional control methods, such as PID control, cannot handle energy use trade-offs among multiple components in the building energy system at a supervisory level. Reinforcement learning (RL) presents a promising solution, offering adaptive and data-driven control strategies that optimize performance over time. However, RL also faces several challenges, including the conflicts encountered in co-optimizing energy savings, occupant comfort, and indoor air quality, and the requirement for extensive interactions with the environment in training. We proposed a flexible simulation platform that integrates a hybrid model for RL training and designed an RL agent to control the entire central HVAC system, focusing on co-optimizing energy consumption, thermal comfort, and indoor air quality ($\text{CO}_{2}$ and PM2.5 concentrations). Finally, we evaluated the RL agent's performance over an annual cycle. Our findings indicate that the RL agent can effectively manage the HVAC system with 14.7 % energy savings annually and balance multiple objectives, which demonstrates significant potential for improving HVAC system control and sustainability in buildings.

Guo, Fangzhou↗