Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

The effect of Cerium addition on microstructure and mechanical properties of high pressure die cast Mg-5Sn alloy

Highlights: • The alloying additive has good grain refinement effect. • The addition of Ce to the Mg-5Sn alloy led to the formation of the new intermetallic phases CeMgSn and Ce{sub 5}Sn{sub 4}. • The hardness, yield and tensile strength of Mg-5Sn alloy were improved with addition of Ce. • The elongation of Mg-5Sn was increased up to 5wt.%Ce addition, and then decreased with addition of 7 wt.%Ce. • The yield and tensile strength of the Ce added alloy were higher than those of the base alloy at elevated temperatures. - Abstract: The effect of Cerium addition to Mg-5Sn alloy and its influence on the microstructure and mechanical properties of the alloy were investigated in this work. The microstructural investigations indicate that the alloying addition of Ce leads to effective grain refinement. Also, it was observed that adding Ce to the Mg-5Sn alloy results in the formation of new phases in the alloy such as Ce{sub 5}Sn{sub 4} and CeMgSn. These intermetallic phases were considered to be effective on the enhancement of the hardness of Mg-5Sn alloy. Furthermore, the tensile test results at room temperature and elevated temperatures revealed that the yield and tensile strength of the Ce added alloy were higher than those of the base alloy. The elongation was also improved up to 5 wt% Ce addition while higher amounts decreased the elongation both at room and elevated temperatures.

36 MATERIALS SCIENCE↗

Microstructure and functionality of a uniquely graded super duplex stainless steel designed by a novel arc heat treatment method

Highlights: • A uniquely graded duplex stainless steel microstructure was fully characterized. • Nitrogen depletion occurred by solid state diffusion next to the fusion boundary. • Phase fractions and stability were compared to thermodynamic calculations. • Orientation relationships and morphology of sigma, chi, nitrides and R were studied. • A diagram summarizing functionality of aged duplex microstructures is introduced. - Abstract: A novel arc heat treatment technique was applied to design a uniquely graded super duplex stainless steel (SDSS), by subjecting a single sample to a steady state temperature gradient for 10 h. A new experimental approach was used to map precipitation in microstructure, covering aging temperatures of up to 1430 °C. The microstructure was characterized and functionality was evaluated via hardness mapping. Nitrogen depletion adjacent to the fusion boundary depressed the upper temperature limit for austenite formation and influenced the phase balance above 980 °C. Austenite/ferrite boundaries deviating from Kurdjumov–Sachs orientation relationship (OR) were preferred locations for precipitation of σ at 630–1000 °C, χ at 560–1000 °C, Cr{sub 2}N at 600–900 °C and R between 550 °C and 700 °C. Precipitate morphology changed with decreasing temperature; from blocky to coral-shaped for σ, from discrete blocky to elongated particles for χ, and from polygonal to disc-shaped for R. Thermodynamic calculations of phase equilibria largely agreed with observations above 750 °C when considering nitrogen loss. Formation of intermetallic phases and 475 °C-embrittlement resulted in increased hardness. A schematic diagram, correlating information about phase contents, morphologies and hardness, as a function of exposure temperature, is introduced for evaluation of functionality of microstructures.

36 MATERIALS SCIENCE↗

Development of high Fe content squeeze cast 2A16 wrought Al alloys with enhanced mechanical properties at room and elevated temperatures

Highlights: • Applied pressure improved tensile properties at both room and elevated temperatures. • Experimental alloys meet the requirement of safety-critical component in automotive industry. • Increasing value of mechanical properties at elevated temperatures resulting from pressure decreases - Abstract: In this study, the evolution of iron-rich intermetallics and their effects on room and elevated-temperature tensile properties of gravity die cast and squeeze cast 2A16 wrought Al alloys with high Fe content of 0.5% after T7 heat treatment were investigated by various methods. Compared to gravity die-cast alloys, squeeze cast 2A16 wrought Al alloys showed superior tensile properties at both room and elevated temperatures, especially in terms of elongation. This can be attributed to refinement in grain size and iron-rich intermetallics, which decreased porosity and raised dispersoids in α(Al) matrix. However, the increase in mechanical properties at high temperature resulting from applied pressure was lower than that obtained at room temperature. The results were attributed to the refinement in grain size and the weakness of grain boundary at elevated temperature.

36 MATERIALS SCIENCE↗

Effects of Nb/Ti/V/Ta on phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic stainless steels

Highlights: • Effects of Nb/Ti/V/Ta on phase precipitation at 1073 K in AFA alloys are studied. • The precipitation of σ-FeCr can be accelerated by the formation of B2-NiAl. • The additions of V and Ta can improve the oxidation resistance of AFA alloys. • The precipitation of σ-FeCr will deteriorate the oxidation resistance. • Good performance can be achieved by M co-alloying and an appropriate M/C ratio. - Abstract: The present work investigated the effects of strong carbide-forming elements M (M = Nb, Ti, V, Ta) on the phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic (AFA) stainless steels (Fe-20Ni-(18–23)Cr-2.5Al-2.3Mo-0.08C-Nb/Ti/V/Ta wt%). The designed alloy rods were solid-solutioned at 1523 K for 1.5 h, and then aged at 1073 K for 24 h or oxidized at 1073 K for 500 h, respectively. Besides primary MC carbides, B2-NiAl, Fe{sub 2}M, and σ-FeCr phases would be precipitated from the γ-austenitic matrix in these aged AFA alloys. Furthermore, the precipitation of σ-FeCr could be accelerated by the B2-NiAl formation, which is related to the γ stability. The formation of MC and Fe{sub 2}M can be controlled via adjusting the ratio of M/C. The oxidation resistance of these AFA alloys can be improved effectively by V and Ta addition due to the formation of compact Al{sub 2}O{sub 3} protective scales. This work will provide a new approach to obtain a good combination of creep strength and oxidation resistance through co-alloying with Nb/Ta/V and controlling the M/C ratio within 1.0–2.0 (in molar ratio) simultaneously.

36 MATERIALS SCIENCE↗

Microstructural characterization of intermetallic phases in a solution-treated Mg–5.0Sm–0.6Zn–0.5Zr (wt%) alloy

Highlights: • Intermetallic phases in a solution-treated Mg–Sm−Zn−Zr alloy were studied using TEM. • Four types of the Zn-/Zr-containing particles were revealed. • New orientation relationships between Zn{sub 2}Zr{sub 3} and Mg matrix were found and discussed. • Intermetallic particles formed during solution can influence alloy's precipitation. - Abstract: Although Zn–Zr intermetallic phases have been frequently reported in solution-treated Mg–RE–Zn–Zr systems (RE presents rare earth), the types, crystal structures and influence on precipitation remain to be systematically investigated. In this work, the intermetallic phases formed during solution treatment in a Mg–Sm–Zn–Zr alloy were studied using transmission electron microscopy. Four types, namely the plate phase, the spindle-like phase, the nano-scale granuliform phase and the rod-like phase were revealed. Except the first one, the other three ones are Zn–Zr phase. In addition, the granuliform phase presents quadrate-shaped or lath-shaped and was identified as Zn{sub 2}Zr{sub 3}. However, these two Zn{sub 2}Zr{sub 3} phases with different shapes follow quite different orientation relationships with Mg matrix. Furthermore, three kinds of rod-like phases were observed: one across the grain boundary but only coherent with one grain, one covered by jagged Mg{sub 3}Sm precipitates and one with no surficial phase. The former twos are Zn{sub 2}Zr{sub 3} while the later one is Zn{sub 2}Zr. Finally, this work indicates that only the plate MgZn{sub 2} phase and the rod-like Zn{sub 2}Zr{sub 3} phase in the grain interior will act as heterogeneous nucleation sites for the Mg{sub 3}Sm precipitates, thus influencing the precipitation.

36 MATERIALS SCIENCE↗

Changing the solidification sequence and the morphology of iron-containing intermetallic phases in AA6061 aluminum alloy processed by spray forming

Highlights: • Spray forming alters the solidification path of the Fe contaminated AA 6061 alloy. • Thus forming primary α-Al{sub 15}(Fe, Mn){sub 3}Si{sub 2} with polyhedral morphology • Thus preventing the formation of AlFeSi with deleterious morphology • Despite Fe contamination final microstructure presented important ductility. - Abstract: Typically, aluminum alloys are contaminated by iron during recycling cycles. Such a procedure leads to the formation of intermetallic phases with detrimental morphology, which acts as stress risers, impairing mechanical properties and consequently hindering further mechanical processing and restricting recycling. This paper aimed at studying the solidification of an AA6061 alloy highly contaminated with iron (1.4 wt%). Spray forming processing allowed altering the solidification path of the Fe-modified AA 6061 alloy, resulting in the formation of primary α-Al{sub 15}(Fe, Mn){sub 3}Si{sub 2} phase with polyhedral morphology, which traps Fe and Si at elevated temperature. Furthermore, spray forming prevented the formation of intermetallic AlFeSi phases with platelet-like morphology, such as β-AlFeSi as well as the typical Chinese script morphology, resulting in a final ductile microstructure, allowing further processing by hot extrusion.

36 MATERIALS SCIENCE↗

Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium

Highlights: • In the present study, FSW of Al to Ti with Nb interlayer has been characterized. • Fragmentation and distribution of Nb and Ti have been correlated with properties. • Ternary mixing and chemical reaction reduced the brittleness of the joint. • Al in the weld nugget showed a gradient in microstructural features. • The weld with Nb interlayer exhibited higher ductility. - Abstract: The most important issue associated with dissimilar welding is the formation of detrimental intermetallics and consequent reduction in mechanical properties of the weld. It was expected that addition of an interlayer would modify the pattern of the intermetallic formation. The present investigation deals with Friction Stir Welding of aluminum (Al) to titanium (Ti) in presence of niobium (Nb) interlayer. X-ray Computed Tomography results highlighted that fine particles of both Ti and Nb are homogeneously distributed. Large Ti particles are substantially fragmented whereas large Nb particles remain as flakes. Microstructural features of the nugget zone indicated a complex mixing of materials. Jointing had been perceived through elemental diffusion at the interfaces of Al/Ti and Ti/Nb. However, Nb restricted the reaction between Al and Ti, and acted as an efficient interlayer to retard the formation of brittle Al{sub 3}Ti intermetallic phase. Mechanisms of microstructural evolution in Al side of the weld have been identified as Dynamic Recovery, Dynamic Recrystallization and particle stimulated nucleation. Significant improvement in the tensile ductility had been observed due to the presence of finer particles. The presence of Nb in the weld nugget influences the microstructural evolution and tensile properties of the weld by reducing the formation of intermetallics.

36 MATERIALS SCIENCE↗

Structural transition in the normal state of the superconductor Mo{sub 3}Sb{sub 7}

Low-temperature X-ray diffraction measurements on a correlated-electron superconductor Mo{sub 3}Sb{sub 7} revealed that the high-temperature cubic state with the Ir{sub 3}Ge{sub 7} type structure (space group Im3-barm) transforms to tetragonal below T{sub S}=53 K, at which spin-gap formation was recently suggested. The effect of electron correlations to the structural instability is briefly discussed in connection with the condensation of the high-temperature local moments to the spin-singlet-like state.

36 MATERIALS SCIENCE↗

Structural and electrochemical properties of nanostructured nickel silicides by reduction and silicification of high-surface-area nickel oxide

Graphical abstract: Nanostructured nickel silicides have been synthesized by reduction and silification of high-surface-area nickel oxide, and exhibited remarkably like-noble metal property, lower electric resistivity, and ferromagnetism at room temperature. Highlights: Black-Right-Pointing-Pointer NiSi{sub x} have been prepared by reduction and silification of high-surface-area NiO. Black-Right-Pointing-Pointer The structure of nickel silicides changed with increasing reaction temperature. Black-Right-Pointing-Pointer Si doping into nickel changed the magnetic properties of metallic nickel. Black-Right-Pointing-Pointer NiSi{sub x} have remarkably lower electric resistivity and like-noble metal property. -- Abstract: Nanostructured nickel silicides have been prepared by reduction and silicification of high-surface-area nickel oxide (145 m{sup 2} g{sup -1}) produced via precipitation. The prepared materials were characterized by nitrogen adsorption, X-ray diffraction, thermal analysis, FT-IR spectroscopy, scanning electron microscopy, transmission electron microscopy, magnetic and electrochemical measurements. The nickel silicide formation involves the following sequence: NiO (cubic) {yields} Ni (cubic) {yields} Ni{sub 2}Si (orthorhombic) {yields} NiSi (orthorhombic) {yields} NiSi{sub 2} (cubic), with particles growing from 13.7 to 21.3 nm. The nickel silicides are ferromagnetic at room temperature, and their saturation magnetization values change drastically with the increase of Si content. Nickel silicides have remarkably low electrical resistivity and noble metal-like properties because of a constriction of the Ni d band and an increase of the electronic density of states. The results suggest that such silicides are promising candidates as inexpensive yet functional materials for applications in electrochemistry as well as catalysis.

36 MATERIALS SCIENCE↗

Transformation behavior and shape memory characteristics of thermo-mechanically treated Ti–(45−x)Ni–5Cu–xV (at%) alloys

Transformation behavior, shape memory characteristics and superelasticity of thermo-mechanically treated Ti–(45−x)Ni–5Cu–xV (at%) (x = 0.5–2.0) alloys were investigated by means of differential scanning calorimetry, transmission electron microscopy, X-ray diffractions, thermal cycling tests under constant load and tensile tests. The B2–B19′ transformation occurred when V content was 0.5 at%, above which the B2–B19–B19′ transformation occurred. The B2–B19 transformation was not separated clearly from the B19–B19′ transformation. Thermo-mechanically treated Ti–(45−x)Ni–5Cu–xV alloys showed perfect shape memory effect and transformation hysteresis(ΔT) of Ti–43.5Ni–5.0Cu–1.5V and Ti–43.0Ni–5.0Cu–2.0V alloys was about 9 K which was much smaller than that of a Ti–44.5Ni–5.0Cu–0.5V alloy(23.3 K). More than 90% of superelastic recovery ratio was observed in all specimens and transformation hysteresis (Δσ) of a Ti–44.5Ni–5.0Cu–0.5V alloy was about 70 MPa, which was much larger than that of a Ti–43.0Ni–5.0Cu–2.0V alloy (35 MPa).

36 MATERIALS SCIENCE↗

Controlled synthesis of different morphologies of TiB{sub 2} microcrystals by aluminum melt reaction method

Highlights: ► TiB{sub 2} microcrystals with different morphologies were synthesized. ► The growth of TiB{sub 2} is controlled by two-dimensional nucleation in Al melt. ► The growth of the hierarchical TiB{sub 2} microcrystals is controlled by two steps. - Abstract: TiB{sub 2} microcrystals with different morphologies, including hexagonal plate-like, tower-like and dendritic, were fabricated by aluminum melt reaction method in this study. The growth mechanisms of these microcrystals are also discussed based on the fundamental crystal growth theories. It is found that the growth of TiB{sub 2} is controlled by two-dimensional nucleation in aluminum melt. If the atomic concentration, reaction rate and atomic diffusion rate in the melt are high, TiB{sub 2} microcrystals exhibit hierarchical tower-like and dendritic morphologies. Otherwise, the single crystal of hexagonal plate-like morphology is obtained. The growth of the hierarchical TiB{sub 2} microcrystals is controlled by two steps, intermittent two-dimensional nucleation and continuous lateral spreading of layers on the growth faces.

36 MATERIALS SCIENCE↗

Martensitic transformation behavior in Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys

Graphical abstract: - Highlights: • Ag, In and Sn were soluble in TiNi matrix, while Sb, Te, Tl, Pb and Bi were not. • The B2-R-B19′transformation occurred in Ti-Ni-(Ag, In, Sn) alloys. • Solid solution hardening was essential for inducing the B2-R transformation. - Abstract: The microstructures and transformation behaviors of Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys were investigated using electron probe micro-analysis (EPMA), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Micro Vickers hardness tests. All specimens consisted of Ti–Ni matrices and second phase particles. Ag, In and Sn were soluble in Ti–Ni matrices with a limited solubility (≤1.0 at%), while Sb, Te, Tl, Pb and Bi were not soluble. Two-stage B2-R-B19′ transformation occurred in Ti–48.8Ni–1.2Ag, Ti–49.0Ni–1.0In and Ti–49.0Ni–1.0Sn alloys, while one-stage B2-B19′ transformation occurred in Ti–49.0Ni–1.0Ag, Ti–49.0Ni–1.0Sb, Ti–49.0Ni–1.0Te, Ti–49.0Ni–1.0Pb and Ti–49.0Ni–1.0Bi alloys. Micro Vickers hardness of the alloys displaying the B2-R-B19′ transformation (Hv 250–368) was much larger than that (<Hv 200) of the alloys displaying the B2-B19′ transformation. Solid solution hardening was an important factor for inducing the B2-R transformation in Ti–Ni–X (X = non-transition elements) alloys.

36 MATERIALS SCIENCE↗

Microstructure and martensitic transformation in Si-coated TiNi powders prepared by ball milling

Graphical abstract: - Highlights: • Amorphous Si-coated TiNi powders were prepared successfully by ball milling. • Ti{sub 4}Ni{sub 4}Si{sub 7} was formed at the interface between Si and TiNi after annealing. • Si-coated Ti–Ni powders displayed the R phase after annealing. - Abstract: Si was coated on the surface of Ti–49Ni (at%) alloy powders by ball milling in order to improve the electrochemical properties of the Si electrodes of secondary Li ion batteries and then the microstructure and martensitic transformation behavior were investigated by means of scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Ti–Ni powders coated with Si were fabricated successfully by ball milling. As-milled powders consisted of highly deformed Ti–Ni powders with the B2 phase and amorphous Si layers. The thickness of the Si layer coated on the surface of the Ti–Ni powders increased from 3–5 μm to 10–15 μm by extending the milling time from 3 h to 48 h. However, severe contamination from the grinding media, ZrO{sub 2} occurred when the ball milling time was as long as 48 h. By heating as-milled powders to various temperatures in the range of 673–873 K, the highly deformed Ti–Ni powders were recovered and Ti{sub 4}Ni{sub 4}Si{sub 7} was formed. Two-stage B2–R–B19′ transformation occurred when as-milled Si-coated Ti–49Ni alloy powders were heated to temperatures below 873 K, above this temperature one-stage B2–B19′ transformation occurred.

36 MATERIALS SCIENCE↗

Three-dimensional interconnected nickel phosphide networks with hollow microstructures and desulfurization performance

Graphical abstract: Three-dimensional interconnected nickel phosphide networks with hollow microstructures and desulfurization performance. - Highlights: • Three-dimensional Ni{sub 2}P has been prepared using foam nickel as a template. • The microstructures interconnected and formed sponge-like porous networks. • Three-dimensional Ni{sub 2}P shows superior hydrodesulfurization activity. - Abstract: Three-dimensional microstructured nickel phosphide (Ni{sub 2}P) was fabricated by the reaction between foam nickel (Ni) and phosphorus red. The as-prepared Ni{sub 2}P samples, as interconnected networks, maintained the original mesh structure of foamed nickel. The crystal structure and morphology of the as-synthesized Ni{sub 2}P were characterized by X-ray diffraction, scanning electron microscopy, automatic mercury porosimetry and X-ray photoelectron spectroscopy. The SEM study showed adjacent hollow branches were mutually interconnected to form sponge-like networks. The investigation on pore structure provided detailed information for the hollow microstructures. The growth mechanism for the three-dimensionally structured Ni{sub 2}P was postulated and discussed in detail. To investigate its catalytic properties, SiO{sub 2} supported three-dimensional Ni{sub 2}P was prepared successfully and evaluated for the hydrodesulfurization (HDS) of dibenzothiophene (DBT). DBT molecules were mostly hydrogenated and then desulfurized by Ni{sub 2}P/SiO{sub 2}.

36 MATERIALS SCIENCE↗

Effect of Ce/Zr molar ratio on the performance of Cu–Ce{sub x}–Zr{sub 1−x}/TiO{sub 2} catalyst for selective catalytic reduction of NO{sub x} with NH{sub 3} in diesel exhaust

Graphical abstract: The Cu–Ce{sub 0.25}–Zr{sub 0.75}/TiO{sub 2} catalyst exhibited excellent SCR activity at 165–450 °C within the range of exhaust temperatures of diesel engines. - Highlights: • Cu–Ce{sub x}–Zr{sub 1−x}/TiO{sub 2} catalysts were prepared by a wet impregnation method. • The property for NH{sub 3}-selective catalytic reduction of NO{sub x} were investigated. • The Ce/Zr molar ratio had effects on the performance of Cu–Ce–Zr/TiO{sub 2} catalysts. • The Cu–Ce{sub 0.25}–Zr{sub 0.75}/TiO{sub 2} sample exhibited 100% NO{sub x} conversion between 165 °C and 450 °C. • The factors that govern the activity enhancement were extensively investigated. - Abstract: Copper–cerium–zirconium catalysts loaded on TiO{sub 2} prepared by a wet impregnation method were investigated for NH{sub 3}-selective catalytic reduction of NO{sub x}, aiming to study the effects of the Ce/Zr molar ratio on the performance of Cu–Ce–Zr/TiO{sub 2} catalysts. The Cu–Ce{sub 0.25}–Zr{sub 0.75}/TiO{sub 2} sample exhibited nearly 100% NO{sub x} conversion over a wide temperature range (165–450 °C), which is strikingly superior to that of Cu/TiO{sub 2} (210–389 °C) within the range of exhaust temperatures of diesel engines. The factors that govern the activity enhancement were extensively investigated by using a series of characterization techniques, namely X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature-programmed reduction by hydrogen (H{sub 2}-TPR). The results showed that the addition of zirconium and/or cerium refined the copper dispersion, prevented copper crystallization and partially incorporated the copper ions into the zirconia (ceira) lattice, which led to enhance the redox abilities of Cu–Ce–Zr/TiO{sub 2} catalysts.

36 MATERIALS SCIENCE↗

Investigations on the electronic, structural, magnetic properties related to shape-memory behavior in Ti{sub 2}CoX (X=Al, Ga, In)

Highlights: • The analysis of phase stability trend is studied for Ti{sub 2}CoX(X = Al, Ga, In). • Ti{sub 2}CoGa is more suitable as shape memory alloy. • Total magnetic moments disappear with a increase of c/a ratio for all systems. • Density of states at the Fermi level are also shown. - Abstract: Using the full-potential local orbital minimum-basis method, we have performed a systematic investigations on the electronic, structural, and magnetic properties related to shape memory applications for Ti{sub 2}CoX (X=Al, Ga, In) alloys. Our results confirm that these alloys are half-metallic ferromagnets with total magnetic moment of 2μ{sub B} per formula unit in austenite phase, and undergo a martensitic transformation at low temperatures. The relative stabilities of the martensitic phases differ considerably between Ti{sub 2}CoX (X=Al, Ga, In). Details of the electronic structures suggest that the differences in hybridizations between the magnetic components are responsible for trends of phase. Quantitative estimates for the energetics and the magnetizations indicate that Ti{sub 2}CoGa is a promising candidate for shape memory applications.

36 MATERIALS SCIENCE↗

CdS-pillared CoAl-layered double hydroxide nanosheets with superior photocatalytic activity

Graphical abstract: - Highlights: • CdS nanocrystals were intercalated into CoAl-LDH interlayer. • The nanohybrid display superior visible-light photocatalytic activity. • A photoexcitation model for the pillared heterostructured system was proposed. - Abstract: A new nanohybrid was synthesized by mixing the positively charged 2D nanosheets of CoAl-layered double hydroxide (CoAl-LDH) and the negatively charged CdS nanosol suspensions. It was revealed that the CdS nanoparticles were intercalated into the interlayer region of CoAl-LDH with a spacing of 2.62 nm. The obtained nanohybrid exhibited a mesoporous texture with an expanded specific surface area of 62 m{sup 2} g{sup −1} and a superior photocatalytic activity in the degradation of acid red with a reaction constant of 1.26 × 10{sup −2} min{sup −1} under visible-light radiation, which is more than 2 times those of his parents CoAl-LDH and CdS.

36 MATERIALS SCIENCE↗