Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INERTIAL CONFINEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Generation of high pressure shocks relevant to the shock-ignition intensity regime

An experiment was performed using the PALS laser to study laser-target coupling and laser-plasma interaction in an intensity regime ≤10{sup 16} W/cm{sup 2}, relevant for the “shock ignition” approach to Inertial Confinement Fusion. A first beam at low intensity was used to create an extended preformed plasma, and a second one to create a strong shock. Pressures up to 90 Megabars were inferred. Our results show the importance of the details of energy transport in the overdense region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnosing Thermonuclear Burn in Fusion Implosions using Ultra-Fast Gas Cherenkov Detectors [Slides]

This presentations addresses these questions. What is fusion and what is ignition? How does LASER driven Inertial Confinement Fusion work? What can we measure and what does it tell us about fusion? How do Gas Cherenkov detectors work and what do they tell us? What are our plans for the future? In brief, the take away messages for this presentation are as follows: DT fusion reaction history provides crucial physics for ICF; gamma reaction history diagnostics are ready to resolve burn width on ignition shots; and GCDs have a lot of potential solving some of the questions related to fusion science.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fundamental factors affecting thermonuclear ignition

Recent inertial confinement fusion experiments on the National Ignition Facility (NIF) have improved performance and interpretability. These results help us address hydrodynamic efficiency, pusher adiabat, tamping, and hot-spot confinement as they pertain to criteria for ignition. Here, we present requirements for propagating burn that are stringent compared to existing literature. The effects of the pusher adiabat on the energy partition for the cold and hot DT are addressed, as well as the persistent discrepancy between the observed and simulated neutron down scattering ratio. The required energy for achieving ignition on NIF and paths forward to optimize or increase the capsule yields for given laser energy are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental evidence of foam homogenization

The propagation of an ionization wave through a subcritical foam is studied under inertial confinement fusion conditions. Independent measurements of the ionization wave velocity are compared with hydrodynamic simulations and analytical models. It is shown that simulations of a homogeneous material at equivalent density strongly overestimate the front velocity. The internal foam structure can be accounted for with a simple model of foam homogenization that allows improving agreement between experiment and calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The National Ignition Facility: Ushering in a new age for high energy density science

The National Ignition Facility (NIF) [E. I. Moses, J. Phys.: Conf. Ser. 112, 012003 (2008); https://lasers.llnl.gov/], completed in March 2009, is the highest energy laser ever constructed. The high temperatures and densities achievable at NIF will enable a number of experiments in inertial confinement fusion and stockpile stewardship, as well as access to new regimes in a variety of experiments relevant to x-ray astronomy, laser-plasma interactions, hydrodynamic instabilities, nuclear astrophysics, and planetary science. The experiments will impact research on black holes and other accreting objects, the understanding of stellar evolution and explosions, nuclear reactions in dense plasmas relevant to stellar nucleosynthesis, properties of warm dense matter in planetary interiors, molecular cloud dynamics and star formation, and fusion energy generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High order resolution of the Maxwell-Fokker-Planck-Landau model intended for ICF applications

A high order, deterministic direct numerical method is proposed for the non-relativistic 2D{sub x}x3D{sub v} Vlasov-Maxwell system, coupled with Fokker-Planck-Landau collision operators. The magnetic field is perpendicular to the 2D{sub x} plane surface of computation, whereas the electric fields occur in this plane. Such a system is devoted to modelling of electron transport and energy deposition in the general frame of Inertial Confinement Fusion applications. It is able to describe the kinetics of the plasma electrons in the nonlocal equilibrium regime, and permits to consider a large anisotropy degree of the distribution function. We develop specific methods and approaches for validation, that might be used in other fields where couplings between equations, multiscale physics, and high dimensionality are involved. Fast algorithms are employed, which makes this direct approach computationally affordable for simulations of hundreds of collisional times.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shell trajectory measurements from direct-drive implosion experiments

A technique to measure the shell trajectory in direct-drive inertial confinement fusion implosions is presented. The x-ray self emission of the target is measured with an x-ray framing camera. Optimized filtering limits the x-ray emission from the corona plasma, isolating a sharp intensity gradient very near the ablation surface. This enables one to measure the radius of the imploding shell with an accuracy better than 1 {mu}m and to determine a 200-ps average velocity to better than 2%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two-plasmon decay instability in inhomogeneous plasmas at oblique laser incidence

The two-plasmon decay (TPD) and stimulated Raman scattering (SRS) instabilities have been studied in the region near the quarter-critical density in the plasmas of the laser-driven inertial confinement fusion for a wide range of laser angles of incidence. The theoretical analysis of the TPD for oblique laser incidence has been carried out. The theoretical growth rates and thresholds have been compared with the results of the fluid-type simulations, and a good agreement has been found. Here, in the modeling including both TPD and SRS, the spectra of the growing perturbations have multiple peaks, and the maximum growth may be influenced by the interplay between TPD and SRS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of the effects of energy deposition on shock-driven turbulent mixing

We perform simulations of laser-driven turbulence experiments with energy deposition, modeling situations where energy is deposited in a mixing layer before or after it is reshocked. Such situations are experienced in, e.g., inertial confinement fusion capsules. We show that the timing of the energy deposition has a significant impact on the development of turbulent flow and corresponding turbulent material mixing. In particular, if the energy is deposited before the shock wave begins interacting with the mixing layer, the development of turbulence and turbulent mixing are inhibited. If, however, the energy is deposited after the shock wave has interacted with a portion of the mixing layer, turbulence generation and turbulent mixing are enhanced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An Invariant-Preserving ALE Method for Solids under Extreme Conditions

We are proposing a fundamentally new approach to ALE methods for solids undergoing large deformation due to extreme loading conditions. Our approach is based on a physically-motivated and mathematically rigorous construction of the underlying Lagrangian method, vector/tensor reconstruction, remapping, and interface reconstruction. It is transformational because it deviates dramatically from traditionally accepted ALE methods and provides the following set of unique attributes: (1) a three-dimensional, finite volume, cell-centered ALE framework with advanced hypo-/hyper-elasto-plastic constitutive theories for solids; (2) a new physically and mathematically consistent reconstruction method for vector/tensor fields; (3) advanced invariant-preserving remapping algorithm for vector/tensor quantities; (4) moment-of-fluid (MoF) interface reconstruction technique for multi-material problems with solids undergoing large deformations. This work brings together many new concepts, that in combination with emergent cell-centered Lagrangian hydrodynamics methods will produce a cutting-edge ALE capability and define a new state-of-the-art. Many ideas in this work are new, completely unexplored, and hence high risk. The proposed research and the resulting algorithms will be of immediate use in Eulerian, Lagrangian and ALE codes under the ASC program at the lab. In addition, the research on invariant preserving reconstruction/remap of tensor quantities is of direct interest to ongoing CASL and climate modeling efforts at LANL. The application space impacted by this work includes Inertial Confinement Fusion (ICF), Z-pinch, munition-target interactions, geological impact dynamics, shock processing of powders and shaped charges. The ALE framework will also provide a suitable test-bed for rapid development and assessment of hypo-/hyper-elasto-plastic constitutive theories. Today, there are no invariant-preserving ALE algorithms for treating solids with large deformations. Therefore, this is a high-impact effort that will significantly advance the state of ALE methods and position LANL as world leaders in advanced ALE methods.

42 ENGINEERING↗

An analytic asymmetric-piston model for the impact of mode-1 shell asymmetry on ICF implosions

For many years, low mode asymmetry in inertially confined fusion (ICF) implosions has been recognized as a potential performance limiting factor, but analysis has been limited to using simulations and searching for data correlations. In this paper, an analytically solvable model based upon the simple picture of an asymmetric piston is presented. Asymmetry of the shell driving the implosion, as opposed to asymmetry in the hot-spot, is key to the model. The model provides a unifying framework for the action of mode-1 shell asymmetry and the resulting connections between various diagnostic signatures. A key variable in the model is the shell asymmetry fraction, f, which is related to the areal density variation of the shell surrounding the hot-spot. It is shown that f is simply related to the observed hot-spot mode-1 velocity and to the concept of residual energy in an implosion. The model presented in this paper yields explicit expressions for the hot-spot diameter, stagnation pressure, hot-spot energy, inertial confinement-time, Lawson parameter, hot-spot temperature, and fusion yield under the action of mode-1 asymmetry. Agreement is found between the theory scalings when compared to ICF implosion data from the National Ignition Facility and to large ensembles of detailed simulations, making the theory a useful tool for interpreting data. The theory provides a basis for setting tolerable limits on asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Threshold for electron trapping nonlinearity in Langmuir waves

We assess when electron trapping nonlinearity is expected to be important in Langmuir waves. The basic criterion is that the inverse of the detrapping rate {nu}{sub d} of electrons in the trapping region of velocity space must exceed the bounce period of deeply trapped electrons, {tau}{sub B}{identical_to}(n{sub e}/{delta}n){sup 1/2}2{pi}/{omega}{sub pe}. A unitless figure of merit, the 'bounce number'N{sub B}{identical_to}1/{nu}{sub d}{tau}{sub B}, encapsulates this condition and defines a trapping threshold amplitude for which N{sub B}=1. The detrapping rate is found for convective loss (transverse and longitudinal) out of a spatially finite Langmuir wave. Simulations of driven waves with a finite transverse profile, using the 2D-2V Vlasov code LOKI, show trapping nonlinearity increases continuously with N{sub B} for transverse loss, and is significant for N{sub B} Almost-Equal-To 1. The detrapping rate due to Coulomb collisions (both electron-electron and electron-ion) is also found, with pitch-angle scattering and parallel drag and diffusion treated in a unified manner. A simple way to combine convective and collisional detrapping is given. Application to underdense plasma conditions in inertial confinement fusion targets is presented. The results show that convective transverse loss is usually the most potent detrapping process in a single f/8 laser speckle. For typical plasma and laser conditions on the inner laser cones of the National Ignition Facility, local reflectivities {approx}3% are estimated to produce significant trapping effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fusion utility in the Knudsen layer

In inertial confinement fusion, the loss of fast ions from the edge of the fusing hot-spot region reduces the reactivity below its Maxwellian value. The loss of fast ions may be pronounced because of the long mean free paths of fast ions, compared with those of thermal ions. We introduce a fusion utility function to demonstrate essential features of this Knudsen layer effect, in both magnetized and unmagnetized cases. The fusion utility concept is also used to evaluate the restoring reactivity in the Knudsen layer by manipulating fast ions in phase space using waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnosing the origin and impact of low-mode asymmetries in ignition experiments at the National Ignition Facility

Inertial confinement fusion ignition requires high inflight shell velocity, good energy coupling between the hotspot and shell, and high areal density at peak compression. Three-dimensional asymmetries caused by imperfections in the drive symmetry or target can grow and damage the coupling and confinement. Recent high-yield experiments have shown that low-mode asymmetries are a key degradation mechanism and contribute to variability. Here we show the experimental signatures and impacts of asymmetry change with increasing implosion yield given the same initial cause. This letter has implications for improving robustness to a key degradation in ignition experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Midterm Summary of Japan-US Fusion Cooperation Program TITAN

Japan-US cooperation program TITAN (Tritium, Irradiation and Thermofluid for America and Nippon) started in April 2007 as 6-year project. This is the summary report at the midterm of the project. Historical overview of the Japan-US cooperation programs and direction of the TITAN project in its second half are presented in addition to the technical highlights. Blankets are component systems whose principal functions are extraction of heat and tritium. Thus it is crucial to clarify the potentiality for controlling heat and tritium flow throughout the first wall, blanket and out-of-vessel recovery systems. The TITAN project continues the JUPITER-II activity but extends its scope including the first wall and the recovery systems with the title of 'Tritium and thermofluid control for magnetic and inertial confinement systems'. The objective of the program is to clarify the mechanisms of tritium and heat transfer throughout the first-wall, the blanket and the heat/tritium recovery systems under specific conditions to fusion such as irradiation, high heat flux, circulation and high magnetic fields. Based on integrated models, the breeding, transfer, inventory of tritium and heat extraction properties will be evaluated for some representative liquid breeder blankets and the necessary database will be obtained for focused research in the future.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigating high speed phenomena in laser plasma interactions using dilation x-ray imager (invited)

The DIlation X-ray Imager (DIXI) is a new, high-speed x-ray framing camera at the National Ignition Facility (NIF) sensitive to x-rays in the range of ≈2–17 keV. DIXI uses the pulse-dilation technique to achieve a temporal resolution of less than 10 ps, a ≈10× improvement over conventional framing cameras currently employed on the NIF (≈100 ps resolution), and otherwise only attainable with 1D streaked imaging. The pulse-dilation technique utilizes a voltage ramp to impart a velocity gradient on the signal-bearing electrons. The temporal response, spatial resolution, and x-ray sensitivity of DIXI are characterized with a short x-ray impulse generated using the COMET laser facility at Lawrence Livermore National Laboratory. At the NIF a pinhole array at 10 cm from target chamber center (tcc) projects images onto the photocathode situated outside the NIF chamber wall with a magnification of ≈64×. DIXI will provide important capabilities for warm-dense-matter physics, high-energy-density science, and inertial confinement fusion, adding important capabilities to temporally resolve hot-spot formation, x-ray emission, fuel motion, and mix levels in the hot-spot at neutron yields of up to 10{sup 17}. We present characterization data as well as first results on electron-transport phenomena in buried-layer foil experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a Laser-Produced Plasma X-ray source for Phase-Contrast Radiography of DT Ice layers

Refraction enhanced x-ray phase contrast imaging is crucial for characterization of deuterium-tritium (DT) ice layer roughness in optically opaque inertial confinement fusion capsules. To observe the time development of DT ice roughness over {approx} second timescales, we need a bright x-ray source that can produce an image faster than the evolution of the ice surface roughness. A laser produced plasma x-ray source is one of the candidates that can meet this requirement. We performed experiments at the Janus laser facility at Lawrence Livermore National Laboratory and assessed the characteristics of the laser produced plasma x-ray source as a potential backlight for in situ target characterization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of Weibel Instability for LWFA and PWFA Electron Beams

Weibel instability is of central importance for relativistic beams both in laboratory, ex. fast-igniter concept for inertial confinement fusion, and astrophysical, ex. cosmic jets, plasmas. Simulations, using QuickPIC, of an intense and monoenergetic beam propagating through a plasma were conducted for experimental setups with Laser Wakefield and RF accelerators and show the appearance of Weibel instability (or current instability). The appearance of the instability is investigated as a function of beam parameters (density, spot size and bunch length) and plasma parameters (plasma density and length of plasma). We present preliminary simulation results that show that the instability should be observable for the RF accelerator experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗