Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High resolution data analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The fundamental bands of HCl-35 and HCl-37 - Line positions from high-resolution laboratory data

Accurate measurements of the positions of lines of the (1-0) vibration-rotation bands of HCl-35 and HCl-37 are reported. The new measurements have been derived from a laboratory spectrum recorded with a Fourier transform spectrometer operated at an unapodized spectral resolution of 0.0060/cm. Molecular constants are reported from a simultaneous least-squares analysis of these measurements and selected infrared and far-infrared data taken from the literature. The motivation for the present investigation is the need for improved HCl line positions for use in IR atmospheric remote sensing investigations.

Rinslad, Curtis P.↗
NASA NTRS1991

The control network of Mars: April 1991

The modern geodetic control network of Mars was first established based on Mariner 9 images with 1-2 km/pixel resolutions and covered almost the entire Martian surface. The introduction of higher resolution (10-200 meter/pixel) Viking Orbiter images greatly improved the accuracy and density of points in the control network. Analysis of the Viking Lander radio tracking data led to more accurate measurements of Mars' rotation period, spin axis direction, and the lander coordinates relative to the inertial reference frame. The prime meridian on Mars was defined by the Geodesy/Cartography Group of the Mariner 9 Television Team as the crater Airy-0, located about 5 degrees south of the equator. The Viking 1 Lander site was identified on a high resolution Viking frame. The control point measurements form the basis of a least squares solution determined by analytical triangulation after the pixel measurements are corrected for geometric distortions and converted to millimeter coordinates in the camera focal plane. Photogrammetric strips encircling Mars at the equator and at 60 degree north south were used to strengthen the overall net and improve the accuracy of the coordinates of points. In addition, photogrammetric strips along 0, 90, 180, and 270 degrees longitude to the Viking 1 Lander site have all significantly strengthened the control network. Most recently, photogrammetric strips were added to the net along 30 degrees north latitude between 0 and 180 degrees, and along 30 degrees between 180 and 360 degrees. The Viking 1 Lander site and Airy-0 are linked through photogrammetric strips occurring along the 0 degree meridian from Airy-0 to 65 degrees north, from that point through the Viking 1 Lander site to the equator, and along the equator to 180 degrees longitude. The Viking 1 lander site is thus a well calibrated area with coordinates of points accurate to approximately 200 meters relative to the J2000 inertial coordinate system. This will be a useful calibration region for upcoming missions. The current status of the control network calculations is presented.

Davies, Merton E.↗
DOE OSTI2023

Profile observations of the Arctic atmospheric boundary layer with the BELUGA tethered balloon during MOSAiC

During the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, the Balloon-bornE moduLar Utility for profilinG the lower Atmosphere (BELUGA) was deployed from an ice floe drifting in the Fram Strait from 29 June to 27 July 2020. The BELUGA observations aimed to characterize the cloudy Arctic atmospheric boundary layer above the sea ice using a modular setup of five instrument packages. The in situ measurements included atmospheric thermodynamic and dynamic state parameters (air temperature, humidity, pressure, and three-dimensional wind), broadband solar and terrestrial irradiance, aerosol particle microphysical properties, and cloud particle images. In total, 66 profile observations were collected during 33 balloon flights from the surface to maximum altitudes of 0.3 to 1.5 km. The profiles feature a high vertical resolution of 0.01 m to 1 m, including measurements below, inside, and above frequently occurring low-level clouds. This publication describes the balloon operations, instruments, and the obtained data set. We invite the scientific community for joint analysis and model application of the freely available data on PANGAEA.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Observed heights of EUV lines formed in the transition zone and corona.

The heights of formation of a number of extreme ultraviolet lines in active regions have been measured from OSO-IV spectroheliograms. Using the Lyman continuum at 2000 km above the white light limb as a reference, we find heights for He I, He II, C III, N III, O IV, O VI, Ne VIII, Mg X, Si XII, Fe XV and Fe XVI that are in approximate agreement with models based on analysis of EUV emission intensities. The height of C II is anomalously high. The accuracy of measurement is typically about 2000 km. The data suggest that the transition zone is less steep than calculated from EUV emission intensities; however, higher resolution observations are necessary to resolve the discrepancy.

Simon, G. W.↗
NASA NTRS1985

High-resolution spectroscopic observation of Vela X-1 in the hard X-ray energy range

The first high resolution (1.2 keV FWHM hard X-ray equal to or greater than 20 keV) observation of Vela X-1 is reported. Data were accumulated during a 5 hour balloon flight launched on December 5, 1984. A summed epoch analysis yields a light curve and period (283 sec) consistent with previous measurements. Significant pulsations were present to an energy of 60 keV. No statistically significant features were observed in the energy spectrum and the spectrum is well fit (x sup 2 = 17.8 for 16 d.o.f.) by a simple exponential spectrum with an E folding length of 10.8 + or - 1.0 keV.

Tueller, J.↗
NASA NTRS1985

Multispectral, thermal infrared satellite data for geologic applications

The value of multispectral thermal infrared satellite data for geologic mapping was assessed, applying the principal component and canonical analysis techniques to the images of the central part of the Arabian Peninsula (a 200 x 300 km area). Low resolution thermal infrared (TIR) data from the Nimbus 5 Surface Composition Mapping Radiometer (SCMR) and the NOAA-7 Advanced Very High Resolution Radiometer (AVHRR) were used. Color images included an 8.8 micrometer (SCMR) and 3.7 and 10.8 micrometer (AVHRR-night) data, ratioed AVHRR day/night TIR data, ratioed AVHRR reflected radiation data, and transformed 8- and 10-band TIR plus reflected radiation data. The results clearly demonstrated the potential geologic value of multispectral TIR data. Igneous and metamorphic units could be separated as a class (although not from each other except for young calc-alkaline granites). Some previously unmapped extensions of mapped faults below thick sedimentary units could be delineated. No single enhancement technique displayed all the potential information, implying that they should be used together.

Blodget, H. W.↗
NASA NTRS1991

Nighttime reactive nitrogen measurements from stratospheric infrared thermal emission observations

IR thermal emission spectra of the earth's atmosphere in the 700-2000/cm region were obtained with a cryogenically cooled high-resolution interferometer spectrometer on a balloon flight from Palestine, Texas, on September 15-16, 1986. The observations exhibit spectral features of a number of stratospheric constituents, including important species of the reactive nitrogen family. An analysis of the observed data for simultaneously measured vertical distributions of O3, H2O, N2O, NO2, N2O5, HNO3, and ClONO2 is presented. These measurements permit the first direct determination of the nighttime total reactive nitrogen concentrations, and the partitioning of the important elements of the NO(x) family. Comparisons of the total reactive nitrogen budget are made with the measurements by the ATMOS experiment and with the predictions of one-dimensional and two-dimensional photochemical models.

Abbas, Mian M.↗
NASA NTRS1991

Alphonsus crater - Floor fracture and dark-mantle deposit distribution from new 3.0-cm radar images

The lunar crater Alphonsus is characterized by numerous fractures or graben, and by endogenic dark-halo craters. Existing maps of fractures from analysis of lunar photography may be biased by the east-west solar illumination. This paper presents new high-resolution, dual-polarization 3.0-cm wavelength radar images of Alphonsus with radar illumination from northerly directions, and uses these data to better map the locations of both the graben and a variety of dark-mantle deposits. The distribution of fractures, and several graben which cut the crater floor and central ridge, are cited as possible evidence for simultaneous, post-Imbrium uplift of both structures. Some of the endogenic dark halo deposits are more extensive in depolarized radar images than in photographs; these extensions are attributed in some cases to more distant emplacement of pyroclastic material, and in others to fortuitous connections with smoother, less cratered portions of the Alphonsus floor.

Zisk, Stanley H.↗
DOE OSTI2023

Self-absorption correction on 2D X-ray fluorescence maps

Abstract X-ray fluorescence mapping (XRF) is a highly efficient and non-invasive technique for quantifying material composition with micro and nanoscale spatial resolutions. Quantitative XRF analysis, however, confronts challenges from the long-lasting problem called self-absorption. Moreover, correcting two-dimensional XRF mapping datasets is particularly difficult because it is an ill-posed inverse problem. Here we report a semi-empirical method that can effectively correct 2D XRF mapping data. The correction error is generally less than 10% from a comprehensive evaluation of the accuracy in various configurations. The proposed method was applied to quantify the composition distribution around the grain boundaries in an electrochemically corroded stainless steel sample. Highly localized Cr enrichment was found around the crack sites, which was invisible before the absorption correction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Rapid retrieval of first-order spatiotemporal distortions for ultrashort laser pulses

High-intensity, ultrashort laser sources are a foundational pillar for High-Energy-Density (HED) physics, and as the repetition-rates of these systems increase, diagnostics must be developed to match their data collection speed. Characterization of any spatiotemporal distortions in the laser pulse is necessary in order to standardize results across facilities. Here, we have previously developed a laser diagnostic called Spatially and Temporally Resolved Intensity and Phase Evaluation Device: Full Information from a Single Hologram, or STRIPED FISH, to measure the full spatiotemporal laser electric field on a single shot. In order to provide rapid feedback, we here adapt the STRIPED FISH retrieval algorithm, which typically has computation times of up to 30 minutes due to the high spatial resolution of the device and its retrieval of the complete four-dimensional pulse field, to distill the key electric field quantities into a handful of scalars for rapid assessment of the pulse's first order distortions. Here, our new, rapid non-iterative retrieval algorithm is validated with simulated and experimental data, and it provides, within seconds, the same first-order information as given by the full analysis. This algorithm is suitable for on-shot assessment of spatiotemporal distortions and can be adapted to assess high repetition-rate laser quality in HED experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

INTERFACES. A Program for Determining the 3D Structures of Surfaces Sites Using NMR Data

Dynamic nuclear polarization surface enhanced NMR spectroscopy has enabled the determination of high-resolution structures from surface-supported molecules, including singlesite heterogeneous catalysts. Structure determinations have largely mimicked the approaches used in biomolecular NMR spectroscopy, namely, using distance measurements to constrain a conformational search. These early demonstrations made use of purpose-built software, which has limited the adoption of the technique. Herein, we describe the open-source program INTERFACES (Interpret NMR to Elucidate or Reconstruct the Full Atomistic Configurations of External Surfaces) which automates the analysis of RE(SP)DOR data as well as the structure determination for surface sites. Distances, angles, dihedral angles, complex orientation, and distance from the support can all be sampled to find all structures that agree with the experimental data. A χ 2 metric is used to define the error ranges of the REDOR fits and produce structures with an arbitrary level of confidence. Structural solutions are then provided as both overlays and ORTEP-like probability ellipsoids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Analysis and Validation of PMT s Waveforms in ICARUS LArTPC Using Monte Carlo Simulations

ICARUS (Imaging Cosmic and Rare Underground Signals) serves as the Far Detector in the Short Baseline Neutrino (SBN) program at Fermilab, playing a central role in investigating the potential existence of sterile neutrinos in the eV squared mass range. The detector consists of two large Liquid Argon Time Projection Chambers (LArTPCs) with a total capacity of 760 tons of liquid Argon. A key component of the system is its array of 360 Photo-Multiplier Tubes (PMTs), which detect the scintillation light produced by charged particles in liquid Argon; the fast scintillation signal enables accurate event timing, triggering, and reconstruction. Together with the TPC and CRT systems, the PMTs ensure precise interaction time measurements, which are crucial for distinguishing neutrino interactions from cosmic-ray backgrounds. ICARUS uses Hamamatsu R5912-MOD PMTs, optimized for cryogenic temperatures, with high quantum efficiency, excellent timing resolution, low dark current (around 10 nA at 1500 V), and broad spectral sensitivity (300–650 nm). These characteristics are crucial for the efficient detection of scintillation light. Analyzing the waveforms of PMT signals allows for a detailed comparison between experimental data and Monte Carlo simulations. This analysis is fundamental for improving the accuracy of neutrino event reconstruction, enhancing detector calibration, and optimizing the detector's performance for current and future operations.

Brio, V. [Catania U.] (ORCID:0009000088807391)↗
DOE OSTI2024

Complete resolution across the neodymium/samarium isotopic envelope with a liquid sampling‐atmospheric pressure glow discharge — Orbitrap mass spectrometer

Rationale Nd and Sm isotope ratios play an important role in geological dating and as nuclear forensic signatures; however, the overlap of the respective 144, 148, 150 Nd/Sm isobars requires prior separations to be performed before analysis on typical MS platforms. The work presented here overcomes these isobaric interferences using ultrahigh‐mass resolution to alleviate interference without prior chemical separations. Methods A liquid sampling‐atmospheric pressure glow discharge ion source was coupled to a standard, QExactive Focus Orbitrap mass spectrometer, providing a mass resolution of ~80 k. A Spectroswiss FTMS booster X2 data acquisition package was used to collect extended transients, providing much higher mass resolution; ~230 k and ~600 k are employed here for Nd and Sm isotopes. Results While the standard Orbitrap resolution is far greater than typical “atomic” MS platforms, it was insufficient to alleviate all isobars. The use of a resolution of ~230 k resulted in baseline separation across the entire isotopic envelope for both Nd and Sm. Isotope ratios obtained from Nd:Sm mixtures using high‐resolution were equivalent to those found for individual‐element solutions, while isotope ratios obtained at a resolution of ~80 k (standard for the OEM data system) showed large deviations. Conclusions Use of ultrahigh‐resolution is an attractive alternative to extensive chemical separations to alleviate severe isobaric interferences. Sufficient mass resolution greatly reduces/eliminates the need for sample manipulations (separations) before analysis while reducing costs and total analysis times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

High resolution EUV spectroscopy of 56 Pegasi (KO 2p + wd)

The hypothesis that X-ray and UV emission by 56 Pegasi (K0II p + wd) originates in a conventional chromosphere, transition region and corona, as opposed to Schindler's hypothesis of accretion of the cool stellar wind onto the white dwarf companion, is discussed. Analysis of IUE data indicates that within the uncertainties associated with determining the stellar radius and abundances, the chromosphere, transition region, and corona of 56 Peg are similar to that of Beta Draconis both in structure and energy balance. The accretion hypothesis is not a unique explanation of the observed spectral properties and the white dwarf companion may not play a direct role. Furthermore, 56 Peg, according to current values of V-R and luminosity class, is on the nonsolar side of the Linsky-Haisch dividing line whereas Beta Draconis is on the solar side.

Jordan, C.↗
NASA NTRS1973

Meteorological utility of high resolution multispectral data

There are no author-identified significant results in this report. This investigation is directed towards determining the meteorological information content of ERTS-1 MSS bulk data at 0.6 - 0.7 microns as a function of resolution. To accomplish this, the resolution of the MSS data is degraded incrementally to 0.5 min. Subsequent analysis of the processed photographs in conjunction with surface and upper air observations will then determine to what extent significant meteorological information has been lost in the degradation process.

Danko, J. M.↗
DOE OSTI2025

TOFHunter—unlocking rapid untargeted screening of inductively coupled plasma–time-of-flight–mass spectrometry data

This study provides an overview of a newly developed open source program written in Python, TOFHunter, which permits the rapid and untargeted screening of inductively coupled plasma (ICP)-time-of-flight (TOF)-mass spectrometry (MS) datasets. ICP-TOF-MS is an analytical tool capable of providing quasi simultaneous detection of all nuclides from Li to Pu. This capability has triggered an increase in studies investigating single-particle analysis in which the TOF-MS provides correlated elemental/isotopic signatures on a particle basis in time. Similarly, laser ablation mapping has seen rapid growth owing to ICP-TOF-MS's capacity to handle fast washout times (<10 ms) while providing a broad nuclide coverage. The caveat to this broad mass coverage and high time resolution comes in the form of large, overwhelming datasets. With datasets typically on the scale of gigabytes, it is easy for a user to only focus on very targeted analytes; however, this focus diminishes the opportunity offered by the TOF-MS detector. TOFHunter applies chemometric methods, principal component analysis (PCA), and interesting features finder (IFF) on ICP-TOF-MS data, allowing for investigation of correlations, major and minor variance sources, and sample screening. The unique spectra identified by the (IFF) are used to generate a list of mass peaks, which are then matched with both nuclides and potential interferences before being exported for the user to investigate. Several case studies are discussed herein, demonstrating TOFHunter's ability to screen aqueous injections, single-particle/single-cell analysis, and probe laser ablation mapping files for unique regions of interest.

47 OTHER INSTRUMENTATION↗
NASA NTRS2017

Using High Spatial Resolution Satellite Imagery to Map Forest Burn Severity Across Spatial Scales in a Pine Barrens Ecosystem

As a primary disturbance agent, fire significantly influences local processes and services of forest ecosystems. Although a variety of remote sensing based approaches have been developed and applied to Landsat mission imagery to infer burn severity at 30 m spatial resolution, forest burn severity have still been seldom assessed at fine spatial scales (less than or equal to 5 m) from very-high-resolution (VHR) data. We assessed a 432 ha forest fire that occurred in April 2012 on Long Island, New York, within the Pine Barrens region, a unique but imperiled fire-dependent ecosystem in the northeastern United States. The mapping of forest burn severity was explored here at fine spatial scales, for the first time using remotely sensed spectral indices and a set of Multiple Endmember Spectral Mixture Analysis (MESMA) fraction images from bi-temporal - pre- and post-fire event - WorldView-2 (WV-2) imagery at 2 m spatial resolution. We first evaluated our approach using 1 m by 1 m validation points at the sub-crown scale per severity class (i.e. unburned, low, moderate, and high severity) from the post-fire 0.10 m color aerial ortho-photos; then, we validated the burn severity mapping of geo-referenced dominant tree crowns (crown scale) and 15 m by 15 m fixed-area plots (inter-crown scale) with the post-fire 0.10 m aerial ortho-photos and measured crown information of twenty forest inventory plots. Our approach can accurately assess forest burn severity at the sub-crown (overall accuracy is 84% with a Kappa value of 0.77), crown (overall accuracy is 82% with a Kappa value of 0.76), and inter-crown scales (89% of the variation in estimated burn severity ratings (i.e. Geo-Composite Burn Index (CBI)). This work highlights that forest burn severity mapping from VHR data can capture heterogeneous fire patterns at fine spatial scales over the large spatial extents. This is important since most ecological processes associated with fire effects vary at the less than 30 m scale and VHR approaches could significantly advance our ability to characterize fire effects on forest ecosystems.

Meng, Ran↗
DOE OSTI2020

Remote Radiation Sensing Using Aerial and Ground Platforms

Remote sensing of ionizing radiation has a significant role in waste management, nuclear material management and nonproliferation, and radiation safety. Robotic platforms can surpass the number of tasks that are achieved by humans. With this technique, the operator's radiation exposure can be decreased. Remote sensing allows for the evaluation and monitoring of radiological contamination. Gamma-ray and neutron sensors were integrated onto the robotic platforms. This approach allows for the radiation sensor data to be dynamically tracked and mapped thus enabling further analysis of the radiation flux in temporal and spatial domains. The goal is to complete scheduled tasks while the robot is being irradiated. To achieve this, electronic components must be shielded and radiation hardened. CZT Detector: Cadmium Zinc Telluride (CZT) detector technology has been a promising solution for gamma-ray and x-ray measurements. Detector data is transferred to the Odroid minicomputer that controls and powers the module via the USB. Robot Operating System (ROS) was utilized for data acquisition and data fusion. The Mariscotti method was employed for the spectrum analysis. A function was programmed in ROS for the automatic identification of photopeaks. CLYC Detector: A Cs{sub 2}LiYCl{sub 6}:Ce{sup 3+} (CLYC) detector was used for simultaneous medium-resolution gamma-ray measurements and neutron counting. A 2.54 cm diameter photomultiplier tube (PMT) was equipped with a high voltage supply and a miniature digitizer. Gamma-ray excitation: fast core-to-valence luminescence (CVL) with 1 ns decay constant, and prompt Ce{sup 3+} emission with 50 ns decay constant. Neutron excitation: slow cerium self-trapped excitation (Ce{sup 3+} STE), 1000 ns decay constant. Radiation Source Localization: Maximum Likelihood Estimation (MLE) and gradient-based methods were used to locate the position of a radiation source based on measured radiation intensities. Multi-Particle Transport Code FLUKA: Estimation of radiation damage of the electronic components is important in order to optimize the robot's operational time while it is irradiated. Displacement per atom (DPA) represents the radiation damage in materials exposed to the ionizing radiation. Various shielding layers of different thickness t were analyzed (< 5% statistical error). The model of the controller of the UAS was designed in FLUKA. Conclusion: CZT and CLYC detectors were integrated onto the robotic platforms. Radiation source localization and contour mapping using robotic platforms were studied. Functions for data analysis and fusion were developed in ROS. FLUKA code was utilized to analyze DPA values. Layers of low-density and high-density materials were used to shield the UAS electronics.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗