Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Handling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Laboratory data manipulation tools basic data handling programs. Volume 2: Detailed software/hardware documentation

The set of computer programs described allows for data definition, data input, and data transfer between the LSI-11 microcomputers and the VAX-11/780 minicomputer. Program VAXCOM allows for a simple method of textual file transfer from the LSI to the VAX. Program LSICOM allows for easy file transfer from the VAX to the LSI. Program TTY changes the LSI-11 operators console to the LSI's printing device. Program DICTIN provides a means for defining a data set for input to either computer. Program DATAIN is a simple to operate data entry program which is capable of building data files on either machine. Program LEDITV is an extremely powerful, easy to use, line oriented text editor. Program COPYSBF is designed to print out textual files on the line printer without character loss from FORTRAN carriage control or wide record transfer.

Source record↗
NASA NTRS1982

VTOL and VSTOL handling qualities specifications, an overview of the current status

The highlights of a comparative analysis between the current helicopter and VSTOL specifications and four representative rotary wing aircraft are presented. Longitudinal, lateral, and directional control power and dynamic stability characteristics were analyzed for hovering conditions. Forward flight static and dynamic stability were analyzed for the longitudinal and lateral-directional axes. Results of the analyses in terms of the applicability/utility of the MIL-H-8501A criteria are presented for each of the above areas. The review of the MIL-H-8301A criteria against those in MIL-F-83300 and AGARD 577 indicate many areas in which MIL-H-8501A does not give adequate design guidance.

Goldstein, K. W.↗
NASA NTRS1982

Unified results of several analytical and experimental studies of helicopter handling qualities in visual terrain flight

The studies were undertaken to investigate the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation on the flying qualities of helicopters performing low-level, terrain-flying tasks in visual meteorological conditions. Some unified results are presented, and the validity and limitations of the flying-qualities data obtained are interpreted. Selected results, related to various design parameters, provide guidelines for the preliminary design of rotor systems and aircraft augmentation systems.

Chen, R. T. N.↗
NASA NTRS1982

Applications of system identification methods to the prediction of helicopter stability, control and handling characteristics

A set of results on rotorcraft system identification is described. Flight measurements collected on an experimental Puma helicopter are reviewed and some notable characteristics highlighted. Following a brief review of previous work in rotorcraft system identification, the results of state estimation and model structure estimation processes applied to the Puma data are presented. The results, which were obtained using NASA developed software, are compared with theoretical predictions of roll, yaw and pitching moment derivatives for a 6 degree of freedom model structure. Anomalies are reported. The theoretical methods used are described. A framework for reduced order modelling is outlined.

Padfield, G. D.↗
NASA NTRS1982

Effects of higher order control systems on aircraft approach and landing longitudinal handling qualities

An investigation of approach and landing longitudinal flying qualities, based on data generated using a variable stability NT-33 aircraft combined with significant control system dynamics is described. An optimum pilot lead time for pitch tracking, flight path angle tracking, and combined pitch and flight path angle tracking tasks is determined from a closed loop simulation using integral squared error (ISE) as a performance measure. Pilot gain and lead time were varied in the closed loop simulation of the pilot and aircraft to obtain the best performance for different control system configurations. The results lead to the selection of an optimum lead time using ISE as a performance criterion. Using this value of optimum lead time, a correlation is then found between pilot rating and performance with changes in the control system and in the aircraft dynamics. It is also shown that pilot rating is closely related to pilot workload which, in turn, is related to the amount of lead which the pilot must generate to obtain satisfactory response. The results also indicate that the pilot may use pitch angle tracking for the approach task and then add flight path angle tracking for the flare and touchdown.

Pasha, M. A.↗
NASA NTRS1985

Handling Software Requests for Commands

Software component created expressly to provide interface between dedicated command buffer and components requesting command issuance. Component resolves problems that arise when software processes command requests from other subsystems and several requests received at approximately same time.

King, W. G., Jr.↗
NASA NTRS1984

Large aircraft handling qualities

The short period frequency requirements of MIL-F-8785C are applicable to the very large transport aircraft simulated. The large aircraft simulated meet the requirements of NASA CR-159236 for effective time delay and pitch transient peak ratio. However, the requirements of this reference for the effective rise time parameter are believed to be too convservative for very large transport aircraft. Data obtained to date as well as other data indicate that MIL-SPEC requirements for the parameter t(phi=30 degrees) are too conservative for very large transport aircraft. The results of the present study indicate that t(phi=30 degrees) of less than 6 sec should result in ""acceptable'' roll response characteristics, and t(phi=30 degrees) of less than 4.0 sec should result in ""satisfactory'' roll response.

Grantham, W. D.↗
NASA NTRS1984

Desktop computer graphics for RMS/payload handling flight design

A computer program, the Multi-Adaptive Drawings, Renderings and Similitudes (MADRAS) program, is discussed. The modeling program, written for a desktop computer system (the Hewlett-Packard 9845/C), is written in BASIC and uses modular construction of objects while generating both wire-frame and hidden-line drawings from any viewpoint. The dimensions and placement of objects are user definable. Once the hidden-line calculations are made for a particular viewpoint, the viewpoint may be rotated in pan, tilt, and roll without further hidden-line calculations. The use and results of this program are discussed.

Homan, D. J.↗
NASA NTRS1983

Acceleration environment of payloads while being handled by the Shuttle Remote Manipulator System

Described in this paper is the method used in the Draper Remote Manipulator System (RMS) Simulation to compute linear accelerations at the point on the SPAS01 payload where its accelerometers are mounted. Simulated accelerometer output for representative on-orbit activities is presented. The objectives of post-flight analysis of SPAS01 data are discussed. Finally, the point is made that designers of acceleration-dependent payloads may have an interest in the capability of simulating the acceleration environment of payloads while under the control of the overall Payload Deployment and retrieval System (PDRS) that includes the Orbiter and its attitude control system as well as the Remote Manipulator Arm.

Turnbull, J. F.↗
NASA NTRS1983

Handling characteristics of a simulated twin tilt nacelle V/STOL aircraft

The first government-conducted piloted flight simulation of the Grumann-designed twin turbofan-powered tilt-engine V/STOL aircraft (design 698) was conducted at NASA Ames Research Center. The aircraft is discussed with an emphasis on its unique hover characteristics. These chracteristics include the adverse nonminimum phase that occurs in lateral and longitudinal translation, and the large attitude control power available. Both of these features are attributes of the control vanes (a Grumman-patented concept) buried in the fan exhaust flow. The simulation used the following NASA Ames Research Center facilities: the Vertical Motion Simulator with the interchangeable cab, the Sigma 8 computer, and the Computer-Generated Image system with a four-window display.

Wilson, S. B., III↗
NASA NTRS1982

A scheme for handling arrays in data-flow systems

An examination of the effects of atomicity (higher resolution) on the performance of array processors (data-flow computers) is presented. Data-flow principles are reviewed, noting the reliance on parallel processing using functional languages to specify sequencing of the operations. Techniques are described for eliminating the necessity of copying whole arrays between processing steps, thereby reducing the number of store cycles. The method involves setting whole columns to specific values rather than individual elements. The individual column values can be processed in parallel, i.e., a locally optimized condition exists. A drawback of the system is the need for more low level arguments, to identify the appropriate processing sequences, and high system complexity.

Gaudiot, J.-L.↗
NASA NTRS1983

Packet telemetry and packet telecommand - The new generation of spacecraft data handling techniques

Because of rising costs and reduced reliability of spacecraft and ground network hardware and software customization, standardization Packet Telemetry and Packet Telecommand concepts are emerging as viable alternatives. Autonomous packets of data, within each concept, which are created within ground and space application processes through the use of formatting techniques, are switched end-to-end through the space data network to their destination application processes through the use of standard transfer protocols. This process may result in facilitating a high degree of automation and interoperability because of completely mission-independent-designed intermediate data networks. The adoption of an international guideline for future space telemetry formatting of the Packet Telemetry concept, and the advancement of the NASA-ESA Working Group's Packet Telecommand concept to a level of maturity parallel to the of Packet Telemetry are the goals of the Consultative Committee for Space Data Systems. Both the Packet Telemetry and Packet Telecommand concepts are reviewed.

Hooke, A. J.↗
NASA NTRS1983

An analysis of cryotrap heat exchanger performance test data (400 area) and recommendations for a system to handle Apollo RCS engines

The current arrangement of a Platecoil heat exchanger which uses LN2 on the inside of parallel tubes, in counter flow to the test cell engine exhaust gases which are drawn through a box surrounding the plates by the existing vacuum blowers is examined. As a result of inadequate performance and special test data it was decided to redesign the system to accommodate an Apollo RCS engine.

Rakow, A.↗
NASA NTRS1985

Data handling and data flow design and their application in the space telescope guide star selection system

The data formats and data encapsulation techniques used in the Space Telescope Guide Star Selection System (GSSS) are described. Emphasis is given to the use of image field and object list transformation to organize and refine high-levels of data flow from Space Telescope. The application of the Ada programming language to data encapsulation techniques is discussed in detail.

Rosenthal, D. A.↗