Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geophysical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electrical Responses of Modified Mineral Surfaces as Observed With Spectral Induced Polarization and Atomic Force Microscopy

Abstract Atomic force microscopy (AFM) and spectral induced polarization (SIP) are widely used to investigate the electrical properties of mineral surfaces at vastly different scales of measurement. We compare AFM and SIP measurements made on two different materials (glass beads and silica gel) subjected to etching, deposition of iron oxide particles, and inclusion of calcite grains. We found that the treatments produced qualitatively consistent behaviors in the AFM and SIP data. Direct AFM measurements of surface charge density for silica and calcite surfaces were quantitatively compared to values estimated from the SIP results using a grain polarization model. No statistically significant difference (at a 95% confidence level) was found between the surface charge density of silica estimated by AFM (2.3 ± 6.6 mC/m 2 for glass beads and 1.6 ± 0.1 mC/m 2 for silica gel) versus SIP (5.4 ± 4.4 mC/m 2 for glass beads and 1.6 ± 0.5 mC/m 2 for silica gel). The surface charge density for calcite determined by AFM (43.5 ± 12.9 mC/m 2 ) was approximately 19 times higher than that found for silica. While the charge density of calcite surfaces determined by SIP was also generally higher than that found for silica, different treatments produced significantly different values between 4.7 and 258 mC/m 2 (with a maximum 95% CI of ±8.7 mC/m 2 ). Several possible explanations exist for the range of the observed SIP measurements, including aging of the calcite surfaces. Overall, this study suggests the potential for the complementary use of AFM and SIP measurements to constrain future investigations of polarization mechanisms in porous media.

Geochemistry & Geophysics↗
DOE OSTI2024

Intermittent Criticality Multi‐Scale Processes Leading to Large Slip Events on Rough Laboratory Faults

Abstract We discuss data of three laboratory stick‐slip experiments on Westerly Granite samples performed at elevated confining pressure and constant displacement rate on rough fracture surfaces. The experiments produced complex slip patterns including fast and slow ruptures with large and small fault slips, as well as failure events on the fault surface producing acoustic emission bursts without externally‐detectable stress drop. Preparatory processes leading to large slips were tracked with an ensemble of ten seismo‐mechanical and statistical parameters characterizing local and global damage and stress evolution, localization and clustering processes, as well as event interactions. We decompose complex spatio‐temporal trends in the lab‐quake characteristics and identify persistent effects of evolving fault roughness and damage at different length scales, and local stress evolution approaching large events. The observed trends highlight labquake localization processes on different spatial and temporal scales. The preparatory process of large slip events includes smaller events marked by confined bursts of acoustic emission activity that collectively prepare the fault surface for a system‐wide failure by conditioning the large‐scale stress field. Our results are consistent overall with an evolving process of intermittent criticality leading to large failure events, and may contribute to improved forecasting of large natural earthquakes.

Geochemistry & Geophysics↗
DOE OSTI2024

In Situ Determination of Thermoelastic Properties of Magnesite at High Pressure and Temperature With Implications to Seismic Detectability of Moderately Carbonated Lithologies in the Earth's Mantle

Abstract Subduction of carbonate‐bearing oceanic plates into Earth's interior recycles carbon from the surface to the deep mantle. The subducted carbonates can significantly affect mantle properties and dynamics. Magnesite is recognized as one of the major potential carbon hosts in the deep mantle because of its stability up to deep lower mantle conditions. However, despite many previous studies on the equation of state and elastic properties of magnesite, large discrepancies still exist for its elastic moduli and their pressure and temperature derivatives. Here we report in situ density and elastic wave velocity measurements on a natural magnesite at simultaneous high pressure‐temperature conditions up to ∼8 GPa–1073 K in a multi‐anvil apparatus using ultrasonic and synchrotron X‐ray techniques. Global fitting of the data set to finite strain equations yieldsK S0 = 114.0 ± 1.2 GPa, = 4.9 ± 0.3, = (−0.019 ± 0.002) GPa/K,G 0 = 68.6 ± 0.4 GPa,G′ = 1.6 ± 0.1, and = (−0.018 ± 0.001) GPa/K. Compared to other major upper mantle and transition zone minerals, magnesite has intermediateV P , the lowestV S , and the lowest density. Thus, magnesite possesses higherV P /V S ratio than other mantle minerals in normal mantle regions, whereas this feature is less pronounced in subduction zone environments. Modeling of the velocity profiles of carbonated lithologies along different geotherms suggests that moderately‐enriched magnesite domains are unlikely to be detected seismically in the Earth's mantle.

Geochemistry & Geophysics↗
DOE OSTI2024

Viscosity Measurements at High Pressures: A Critical Appraisal of Corrections to Stokes' Law

Abstract Fluids and melts in planetary interiors significantly influence geodynamic processes from volcanism to global‐scale differentiation. The roles of these geofluids depend on their viscosities ( η ). Constraining geofluid η at relevant pressures and temperatures relies on laboratory‐based measurements and is most widely done using Stokes' Law viscometry with falling spheres. Yet small sample chambers required by high‐pressure experiments introduce significant drag on the spheres. Several correction schemes are available for Stokes' Law but there is no consensus on the best scheme(s) for high‐pressure experiments. We completed high‐pressure experiments to test the effects of (a) the relative size of the sphere diameter to the chamber diameter and (b) the top and bottom of the chamber, that is, the ends, on the sphere velocities. We examined the influence of current correction schemes on the estimated viscosity using Monte Carlo simulations. We also compared previous viscometry work on various geofluids in different experimental setups/geometries. We find the common schemes for Stokes' Law produce statistically distinct values of η . When inertia of the sphere is negligible, the most appropriate scheme may be the Faxén correction for the chamber walls. Correction for drag due to the chamber ends depends on the precision in the sinking distance and may be ineffective with decreasing sphere size. Combining the wall and end corrections may overcorrect η . We also suggest the uncertainty in η is best captured by the correction rather than propagated errors from experimental parameters. We develop an overlying view of Stokes' Law viscometry at high pressures.

Geochemistry & Geophysics↗
DOE OSTI2024

Process Modeling of Aerosol‐Cloud Interaction in Summertime Precipitating Shallow Cumulus Over the Western North Atlantic

Abstract Process modeling of Aerosol‐cloud interaction (ACI) is essential to bridging gaps between observational analysis and climate modeling of aerosol effects in the Earth system and eventually reducing climate projection uncertainties. In this study, we examine ACI in summertime precipitating shallow cumuli observed during the Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE). Aerosols and precipitating shallow cumuli were extensively observed with in‐situ and remote‐sensing instruments during two research flight cases on 02 June and 07 June, respectively, during the ACTIVATE summer 2021 deployment phase. We perform observational analysis and large‐eddy simulation (LES) of aerosol effect on precipitating cumulus in these two cases. Given the measured aerosol size distributions and meteorological conditions, LES is able to reproduce the observed cloud properties by aircraft such as liquid water content (LWC), cloud droplet number concentration ( N c ) and effective radius r eff . However, it produces smaller liquid water path (LWP) and larger N c compared to the satellite retrievals. Both 02 and 07 June cases are over warm waters of the Gulf Stream and have a cloud top height over 3 km, but the 07 June case is more polluted and has larger LWC. We find that the N a ‐induced LWP adjustment is dominated by precipitation feedback for the 2 June precipitating case and there is no clear entrainment feedback in both cases. An increase of cloud fraction due to a decrease of aerosol number concentration is also shown in the simulations for the 02 June case.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Early Career Perspectives to Broaden the Scope of Critical Zone Science

Abstract Critical Zone (CZ) scientists have advanced understanding of Earth's surface through process‐based research that quantifies water, energy, and mass fluxes in predominantly undisturbed systems. However, the CZ is being increasingly altered by humans through climate and land use change. Expanding the scope of CZ science to include both human‐ and non‐human controls on the CZ is important for understanding anthropogenic impacts to Earth's surface processes and ecosystem services. Here, we share perspectives from predominantly U.S.‐based, early career CZ scientists centered around broadening the scope of CZ science to focus on societally relevant science through a transdisciplinary science framework. We call for increased training on transdisciplinary methods and collaboration opportunities across disciplines and with stakeholders to foster a scientific community that values transdisciplinary science alongside physical science. Here, we build on existing transdisciplinary research frameworks by highlighting the need for institutional support to include and educate graduate students throughout the research processes. We also call for graduate‐student‐led initiatives to increase their own exposure to transdisciplinary science through activities such as transdisciplinary‐focused seminars and symposiums, volunteering with local conservation groups, and participating in internships outside academia.

Warix, Sara [University of Utah Department of Geol↗
DOE OSTI2025

Dissolved Organic Carbon in Coastal Waters: Global Patterns, Stocks and Environmental Physical Controls

Abstract Dissolved organic carbon (DOC) in coastal waters is integral to biogeochemical cycling, but global and regional drivers of DOC are still uncertain. In this study we explored spatial and temporal differences in DOC concentrations and stocks across the global coastal ocean, and how these relate to temperature and salinity. We estimated a global median coastal DOC stock of 3.15 Pg C (interquartile range (IQR) = 0.85 Pg C), with median DOC concentrations being 2.2 times higher than in open ocean surface waters. Globally and seasonally, salinity was the main driver of DOC with concentrations correlated negatively with salinity, without a clear relationship to temperature. DOC concentrations and stocks varied with region and season and this pattern is likely driven by riverine inputs of DOC and nutrients that stimulate coastal phytoplankton production. Temporally, high DOC concentrations occurred mainly in months with high freshwater input, with some exceptions such as in Eastern Boundary Current margins where peaks are related to primary production stimulated by nutrients upwelled from the adjacent ocean. No spatial trend between DOC and temperature was apparent, but many regions (19 out of 25) had aligned peaks of seasonal temperature and DOC, related to increased phytoplankton production and vertical stratification at high temperatures. Links of coastal DOC with salinity and temperature highlight the potential for anthropogenic impacts to alter coastal DOC concentration and composition, and thereby ecosystem status.

Lønborg, Christian [Section for Marine Diversity a↗
DOE OSTI2024

Formation of a Large Cold Groundwater Mantle Helium Anomaly and High Temperature Geothermal Resources in Response to Bimodal Magmatism Near Roosevelt Hot Springs and Utah FORGE, Milford Valley, Southwest Utah

Abstract A large mantle helium anomaly and separate domains of high heat flow are the predominant manifestations of bimodal magmatic activity in the Milford valley. The mantle helium anomaly (1.9–2.6 R/Ra) covers 270 km 2 and is subdivided into two separated domains: a cold shallow groundwater regime and high temperature hydrothermal activity. The zone of anomalous heat flow covers >100 km 2 and is also subdivided into two adjacent domains, comprising hydrothermal activity at Roosevelt Hot Springs (RHS) (3–7 W/m 2 ) and conductive heat flow (100–180 mW/m 2 ). While the transfer of heat and mantle helium at RHS are coupled, heat and helium transfer are decoupled in the adjacent cold groundwater regime to the west. Both the mantle helium and geothermal anomalies are attributed to recent mafic‐felsic magmatic intrusions of >400 km 3 , however, the absence of volcanic eruptions <500,000 years indicates magmas stall before rising to shallow crustal level <10 km depth. Deep level magmatism produces a felsic composition melt, which is inferred to be responsible for the widespread and near uniform range of diluted mantle helium values. A thick and impermeable mass of crystalline granitic basement rock at the mid‐crustal level divides the ascent of mantle helium into separate flow paths. It may also impede the rise of buoyant magma trapping thermal energy that facilitates partial melting, slow cooling, and development of a thick thermal aureole. Partitioning of convective and conductive thermal regimes and independent flow paths supplying deeply derived helium characterize the development of a large long‐lived magma‐related geothermal system.

Geochemistry & Geophysics↗
DOE OSTI2025

Propagation and Periodicity of Mars's Northern Annular Mode Modulates the Dust Cycle

Abstract We document the propagation of annular modes—zonally symmetric patterns of variability—in Mars's atmosphere using a reanalysis dataset. Mars's Northern Annular Mode (MNAM) sees anomalies of zonal‐mean zonal wind emerge near the subtropics and migrate poleward with a period of 150 days, similarly to Earth's Southern Annular Mode. The mechanism of propagation involves the interaction of the two leading empirical orthogonal functions that define the MNAM. Moreover, the propagation encourages alternating bands of surface wind stress to migrate polewards with a 150‐day period. In addition, a 150‐day periodicity in anomalous column dust optical depth most likely emerges in response to extrema of the MNAM. The combination of the impact of the MNAM's internally forced periodicity on the surface wind stress and the seasonal cycle may contribute to the inter‐annual variability of global dust events, as suggested by a Monte Carlo estimate that correctly approximates the observed incidence of global dust events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Radiocarbon Fingerprinting Black Carbon Source History in the Himalayas

Abstract Black carbon (BC) is considered as an important contributor to the Himalayan glaciers melt in the past few decades. However, the long‐term source apportionment of BC remains unclear. Here we present the first radiocarbon ( 14 C)‐based annual variation of BC source apportionment in an ice core spanning the period of 1959–2012 drilled from the Southeastern Tibetan Plateau, a receptor site of South Asia outflow. We find fossil fuel combustion is a major contribution (73% ± 5%), yet the biomass burning fraction ( ƒ biomass ) has grown from 24% ± 4% to 30% ± 4% since 1990. Intriguingly, we further find the ƒ biomass demonstrating a robust correlation with South Asian wildfires linked to climate oscillations. Thus, for mitigating BC impacts on Himalayan glaciers, South Asia's transition from fossil fuels to clean energy is a more efficient and urgent strategy than reducing residential biomass burning.

Wang, Mo [State Key Laboratory of Tibetan Plateau ↗
DOE OSTI2024

Geodetic Evidence for Distributed Shear Below the Brittle Crust of the Walker Lane, Western United States

Abstract Models of active deformation of the Earth's crust are predominantly represented with dislocations having a downdip continuation into the lower crust, where the fault slips continuously. This model predicts surface strain accumulation concentrated near the fault during the interseismic period. In an alternative model, faults do not extend beneath the elastic portion of the crust and are accompanied by a wide zone of distributed shear underneath, predicting a more constant strain rate lacking concentrations at the faults. We use high‐precision GPS data collected across the northern and central Walker Lane, USA— a region of complex faulting near the western edge of the Basin and Range Province to evaluate which model is appropriate. Despite the existence of dense continuous and semi‐continuous geodetic networks that have been surveyed for ∼20 years, the horizontal velocities reveal no evidence of localized strain accumulation across the fault surface expressions. Instead, deformation within the Walker Lane is uniformly linear, suggesting that the surface deformation reflects distributed shear within the ductile crust rather than focused deformation at faults. This suggests no downdip extension of the faults below the seismogenic layer. The shear zone is 172 ± 6 km wide in the northernmost Walker Lane narrowing to 116 ± 4 km in the central Walker Lane. The total velocity budget across the shear zone is 7.2 ± 0.1 mm/yr in the north, increasing to 10.1 ± 0.1 mm/yr in the central Walker Lane. We conclude that assuming the presence of lower crustal dislocations when estimating geodetic faults slip rates may be inappropriate.

Geochemistry & Geophysics↗
DOE OSTI2024

Stress Field Dynamics and Fault Slip Potential in the Paradox Basin

Abstract The Paradox Basin, straddling Utah, Colorado, Arizona, and New Mexico is characterized by an intricate amalgamation of evaporites and clastic layers and is dominated by prominent salt walls and related subsurface structures. Our research offers a new examination of the stress distribution across the basin, deriving from continuous and discrete stress measurements conducted in boreholes in the region and focal mechanism analysis, emphasizing variations over salt structures. Integrating Coulomb failure criteria with probabilistic methods, we assess potential fault movements resulting from fluid pressure alterations. Our approach provides a comprehensive understanding of the Paradox Basin's state of stress, showing a continuous change of the maximum horizontal stress orientation from N‐S at the Wasatch Fault Zone to WNW‐ESE in the northern part of the Paradox Basin and to WSW‐ENE in the southern part of the basin. Further East, into the Colorado Plateau and the Uncompahgre Uplift, the S H max orientation becomes E‐W. Decoding stress orientation dynamics has enabled critical insights into fault slip potential, especially in the basin's northern region. The salt wall faults are less likely to slip, and the Paradox Formation's evaporite and clastic rock sequence can serve as a potential low seismic risk target for carbon storage and hydrocarbon extraction.

Geochemistry & Geophysics↗
DOE OSTI2024

A Frequency Domain Methodology for Quantitative Evaluation of Diffuse Wavefield With Applications to Seismic Imaging

Abstract Ambient Noise Imaging (ANI) of subsurface structures relies on seismic interferometry of diffuse seismic wavefields. However, the lack of effective methods to quantify and identify highly diffuse waves hampers applications of ANI, particularly in evaluating seismic attenuation and monitoring structural changes with high temporal resolution. Conventional ANI approaches require data normalization, which effectively suppresses the non‐diffuse component with large amplitude but also results in significant loss of amplitude and phase information in the continuous seismic records. In this study, we propose a frequency domain method to quantitatively evaluate the degree of diffuseness of seismic wavefields by analyzing their statistical characteristics of modal amplitudes for stationarity and randomness. Tests on synthetic waveform and field nodal records show that the proposed method can effectively distinguish between diffuse and non‐diffuse waveforms for either single‐ or three‐component data. As an application, we identify a 60‐s‐long diffuse coda of a local M 2.2 earthquake recorded by a dense nodal array on the San Jacinto Fault Zone, and successfully extract high‐quality dispersion curve andQ‐value without performing data normalization. These results are consistent with those obtained by conventional methods that assess the correlation between coherency and the Green's function, and by modeling ballistic waves generated by road traffic. Our proposed method can advance the imaging of subsurface velocity and attenuation structures as well as monitoring temporal changes for scientific studies and engineering applications.

Geochemistry & Geophysics↗
DOE OSTI2024

Velocity Dependence of Rate‐And‐State Friction in Granular Fault Gouge and Implications for Slow‐Slip Events

Abstract The standard rate‐and‐state friction (RSF) has extensively captured frictional behaviors, but it fails to explain the velocity dependence of frictional stability transition and widespread slow‐slip events (SSEs) in experiments and nature adequately. An alternative microphysical Chen‐Niemeijer‐Spiers (CNS) model can well describe the velocity dependence of frictional behaviors of granular gouges. Using the original CNS model, standard RSF parameters can be quantified microphysically. However, some micro‐parameters are not easy to estimate quantitatively, making it difficult to extrapolate to natural and experimental conditions. Here, we simplify the microphysically‐derived RSF parameters including direct effect a , evolution effect b , and critical slip distance D c , as well as equivalent values ( a eq , b eq , and D eq ). The simplified friction parameters directly illustrate their velocity dependence, namely the essentially constant a , a eq , and D c , negatively velocity‐dependent b and b eq , as well as varying D eq for different laws. They are roughly consistent with experimental results in various fault gouges. A modified CNS model is further derived from the original CNS model, establishing a direct link between the standard RSF and CNS models. The modified CNS model exhibits virtually identical frictional behaviors to the original CNS, but differs from the standard RSF at large velocity perturbations. Moreover, the linearized stability analysis indicates that the critical stiffness for the modified CNS model is velocity‐dependent. Compared with the standard RSF, the modified CNS model not only explains the velocity dependence of frictional stability transition, but also exhibits a more gradual transition for SSEs with a broader range of stiffness ratios.

Geochemistry & Geophysics↗
DOE OSTI2024

Estimating the Electric Fields Driving Lightning Dart Leader Development With BIMAP‐3D Observations

Abstract In this paper, a numerical dart leader model has been implemented to understand the leader's development and the corresponding electric field changes observed by the 3D broadband mapping and polarization (BIMAP‐3D) system. The model assumes the extending leader channel is equipotential and has a linear charge distribution induced by an ambient electric field. The charge distribution induced by the ambient field can be used to model the electric field change at the ground. We then find the ambient electric field which best fits the field change measurements at the two BIMAP stations. The estimated ambient electric field decreases in the direction of dart leader propagation. Our observations and modeling results are consistent with our earlier hypothesis that dart leader speed is proportional to the electric field at the leader tip. The model also supports our earlier analysis that leader speed variations near branch junctions were due to previous charge deposits near the junctions. The modeled tip electric field is generally lower than the breakdown field unless the pre‐dart‐leader channel has a significant temperature of 3,000 K. This is consistent with the fact that dart leaders typically do not form new branches into the virgin air. Furthermore, the tip field is generally close to the negative streamer stability field at ambient temperatures, explaining the nature of the narrow and well‐defined channel structure. In addition to the charge distribution and the ambient and tip electric field, the development of the channel potential and current distribution are also presented.

3D lightning mapping↗
DOE OSTI2026

Large Eddy Simulations of the Atmospheric Boundary Layer Over Satellite‐Sensed Sea Ice Maps

Surface heterogeneity in the marginal ice zone (MIZ) causes multiscale secondary atmospheric circulations that are challenging to model or observe. The absence or inadequate representation of these circulations in ocean‐atmosphere exchange schemes in climate models is partially responsible for the underestimation of Arctic sea ice loss. Observationally, such circulations obfuscate the interpretation of polar atmospheric chemistry measurements, among others. To address this open challenge, large‐eddy simulations are conducted over real‐world satellite‐sensed sea ice maps with an ice‐sea temperature contrast, as well as over idealizations of these maps that alter the ice pattern but conserve its fraction, showing that the ice fraction of a surface is not sufficient to predict the surface heat flux. In a second suite of simulations, three other heterogeneity metrics (representing the surface fragmentation, patch edge tortuosity, and patch size variability) are introduced to complement the ice fraction in describing the surface. Simulations varying these parameters suggest that they also significantly impact surface‐air interactions. A roughness contrast is then added to the surface temperature contrast, indicating that the contribution of roughness changes to the resulting atmospheric circulations is less pronounced than that of thermal heterogeneity. Based on these results, we illustrate, using a multi‐linear regression on these map features, that MIZ surface parameterizations in Earth Systems Models can be improved if they account for these various characteristics of the sea‐ice patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Extensive Secondary Cratering From the InSight Sol 1034a Impact Event

Abstract Impact cratering is one of the fundamental processes throughout the history of the Solar System. The formation of new impact craters on planetary bodies has been observed with repeat images from orbiting satellites. However, the time gap between images is often large enough to preclude detailed analysis of smaller‐scale features such as secondary impact craters, which are often removed or buried over a short time period. Here we use a seismic event detected on Mars by the NASA InSight mission to investigate secondary cratering at a new impact crater. We strengthen the case that the seismic event that occurred on Sol 1034 (S1034a) is the result of a new impact cratering event. Using the exact timing of this event from InSight, we investigated the resulting new impact crater in orbital image data. The S1034a impact crater is approximately 9 m in diameter but is responsible for over 900 secondary impact events in the form of low albedo spots that are located at distances of up to almost 7 km from the primary crater. We suggest that the low albedo spots formed from relatively low energy ejecta, with individual ejecta block velocities less than 200 m s −1 . We estimate that the low albedo spots, the main evidence of secondary impact processes at this new impact event, fade within 200–300 days after formation.

Grindrod, P. M. [Natural History Museum London UK]↗
DOE OSTI2024

Using an Isotope Enabled Mass Balance to Evaluate Existing Land Surface Models

Abstract Land surface models (LSMs) play a crucial role in elucidating water and carbon cycles by simulating processes such as plant transpiration and evaporation from bare soil, yet calibration often relies on comparing LSM outputs of landscape total evapotranspiration ( ET ) and discharge with measured bulk fluxes. Discrepancies in partitioning into component fluxes predicted by various LSMs have been noted, prompting the need for improved evaluation methods. Stable water isotopes serve as effective tracers of component hydrologic fluxes, but data and model integration challenges have hindered their widespread application. Leveraging National Ecological Observation Network measurements of water isotope ratios at 16 US sites over 3 years combined with LSM‐modeled fluxes, we employed an isotope‐enabled mass balance framework to simulate ET isotope values ( δET ) within three operational LSMs (Mosaic, Noah, and VIC) to evaluate their partitioning. Models simulating δET values consistent with observations were deemed more reflective of water cycling in these ecosystems. Mosaic exhibited the best overall performance (Kling‐Gupta Efficiency of 0.28). For both Mosaic and Noah there were robust correlations between bare soil evaporation fraction and error (negative) as well as transpiration fraction and error (positive). We found the point at which errors are smallest ( x ‐intercept of the multi‐site regression) is at a higher transpiration fraction than is currently specified in the models. Which means that transpiration fraction is underestimated on average. Stable isotope tracers offer an additional tool for model evaluation and identifying areas for improvement, potentially enhancing LSM simulations and our understanding of land‐surface hydrologic processes.

58 GEOSCIENCES↗